summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2008-04-19x86: use dma_length in i386Glauber Costa1-0/+1
This is done to get the code closer to x86_64. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: use WARN_ON in mapping functionsGlauber Costa1-0/+3
In the very same way i386 do, we use WARN_ON functions in map_simple and map_sg. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: use sg_phys in x86_64Glauber Costa1-1/+1
To make the code usable in i386, where we have high memory mappings, we drop te virt_to_bus(sg_virt()) construction in favour of sg_phys. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: Add flush_write_buffers in nommu functionsGlauber Costa1-0/+2
This patch adds flush_write_buffers() in some functions of pci-nommu_64.c They are added anywhere i386 would also have it. This is not a problem for x86_64, since flush_rite_buffers() an nop for it. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: implement mapping_error in pci-nommu_64.cGlauber Costa1-0/+12
This patch implements mapping_error for pci-nommu_64.c. It takes care to keep the same compatible behaviour it already had. Although this file is not (yet) used for i386, we introduce the i386 version here. Again, care is taken, even at the expense of an ifdef, to keep the same behaviour inconditionally. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: delete empty functions from pci-nommu_64.cGlauber Costa1-15/+0
This functions are now called conditionally on their existence in the struct. So just delete them, instead of keeping an empty implementation. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: introduce pci-dma.cGlauber Costa4-22/+15
This patch introduces pci-dma.c, a common file for pci dma between i386 and x86_64. As a start, dma_set_mask() is the same between architectures, and is placed there. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_supported and dma_set_mask to pci-dma_32.c, fixMark McLoughlin1-0/+2
ERROR: "dma_supported" [drivers/ssb/ssb.ko] undefined! ERROR: "dma_set_mask" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! ERROR: "dma_set_mask" [drivers/scsi/aic7xxx/aic7xxx.ko] undefined! ERROR: "dma_set_mask" [drivers/scsi/aic7xxx/aic79xx.ko] undefined! ERROR: "dma_supported" [drivers/net/pcnet32.ko] undefined! ERROR: "dma_supported" [drivers/media/video/saa7134/saa7134.ko] undefined! ERROR: "dma_set_mask" [drivers/media/video/meye.ko] undefined! ERROR: "dma_supported" [drivers/media/video/cx88/cx8802.ko] undefined! ERROR: "dma_supported" [drivers/media/video/cx88/cx8800.ko] undefined! ERROR: "dma_supported" [drivers/media/video/cx88/cx88-alsa.ko] undefined! ERROR: "dma_supported" [drivers/media/video/cx23885/cx23885.ko] undefined! They just need to be exported like on x86_64. dma_supported() and dma_set_mask() were previously inlined, but are now moved to pci-dma_32.c. Since they're used by various drivers, they need to be exported. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: unify dma_mapping_errorGlauber Costa1-0/+7
We provide a map_error function in pci-base_32.c to make sure i386 keeps with the same behaviour it used to. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: provide a bad_dma_address symbol for i386Glauber Costa1-0/+4
It's initially 0, since we don't expect any DMA there. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_supported and dma_set_mask to pci-dma_32.cGlauber Costa1-0/+33
This is the way x86_64 does, so this make them equal. They have to be extern now in the header, and the extern definition is moved to the common dma-mapping.h header. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: dma-ops on highmem fixIngo Molnar6-15/+22
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_sync_sg_for_device to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_sync_sg_for_cpu to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_sync_single_range_for_device to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_sync_single_range_for_cpu to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_sync_single_for_device to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_sync_single_for_cpu to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_unmap_sg to common headerGlauber Costa1-0/+1
i386 gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_map_sg to common headerGlauber Costa1-0/+19
the old i386 implementation is moved to pci-base_32.c Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: move dma_unmap_single to common headerGlauber Costa1-0/+1
i386 base does not need it, so it gets an empty function. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: implement dma_map_single through dma_opsGlauber Costa2-0/+21
That's already the name of the game for x86_64. For i386, we add a pci-base_32.c, that will hold the default operations. The function call itself goes through dma-mapping.h , the common header Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: reserve dma32 early for gartYinghai Lu2-0/+51
a system with 256 GB of RAM, when NUMA is disabled crashes the following way: Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Cannot allocate aperture memory hole (ffff8101c0000000,65536K) Kernel panic - not syncing: Not enough memory for aperture Pid: 0, comm: swapper Not tainted 2.6.25-rc4-x86-latest.git #33 Call Trace: [<ffffffff84037c62>] panic+0xb2/0x190 [<ffffffff840381fc>] ? release_console_sem+0x7c/0x250 [<ffffffff847b1628>] ? __alloc_bootmem_nopanic+0x48/0x90 [<ffffffff847b0ac9>] ? free_bootmem+0x29/0x50 [<ffffffff847ac1f7>] gart_iommu_hole_init+0x5e7/0x680 [<ffffffff847b255b>] ? alloc_large_system_hash+0x16b/0x310 [<ffffffff84506a2f>] ? _etext+0x0/0x1 [<ffffffff847a2e8c>] pci_iommu_alloc+0x1c/0x40 [<ffffffff847ac795>] mem_init+0x45/0x1a0 [<ffffffff8479ff35>] start_kernel+0x295/0x380 [<ffffffff8479f1c2>] _sinittext+0x1c2/0x230 the root cause is : memmap PMD is too big, [ffffe200e0600000-ffffe200e07fffff] PMD ->ffff81383c000000 on node 0 almost near 4G..., and vmemmap_alloc_block will use up the ram under 4G. solution will be: 1. make memmap allocation get memory above 4G... 2. reserve some dma32 range early before we try to set up memmap for all. and release that before pci_iommu_alloc, so gart or swiotlb could get some range under 4g limit for sure. the patch is using method 2. because method1 may need more code to handle SPARSEMEM and SPASEMEM_VMEMMAP will get Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 264245736k/268959744k available (8484k kernel code, 4187464k reserved, 4004k data, 724k init) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19srat, x86: add support for nodes spanning other nodesSuresh Siddha4-17/+42
For example, If the physical address layout on a two node system with 8 GB memory is something like: node 0: 0-2GB, 4-6GB node 1: 2-4GB, 6-8GB Current kernels fail to boot/detect this NUMA topology. ACPI SRAT tables can expose such a topology which needs to be supported. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86 vDSO: compile with -g, 64-bitRoland McGrath1-1/+2
The 64-bit vDSO's sources are compiled with -g0 for no good reason. Using -g when enabled lets their separate debug files be used at runtime via build ID matching, same as we can see 32-bit vDSO's assembly sources. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: fpu xstate split cleanupSuresh Siddha1-2/+1
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86, fpu: lazy allocation of FPU area - v5Suresh Siddha6-22/+88
Only allocate the FPU area when the application actually uses FPU, i.e., in the first lazy FPU trap. This could save memory for non-fpu using apps. for example: on my system after boot, there are around 300 processes, with only 17 using FPU. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86, fpu: split FPU state from task struct - v5Suresh Siddha10-59/+107
Split the FPU save area from the task struct. This allows easy migration of FPU context, and it's generally cleaner. It also allows the following two optimizations: 1) only allocate when the application actually uses FPU, so in the first lazy FPU trap. This could save memory for non-fpu using apps. Next patch does this lazy allocation. 2) allocate the right size for the actual cpu rather than 512 bytes always. Patches enabling xsave/xrstor support (coming shortly) will take advantage of this. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: rename find_max_pfn() to propagate_e820_map()Ingo Molnar3-7/+7
this function doesnt just 'find' the max_pfn - it also has other side-effects such as registering sparse memory maps. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: tsc prevent time going backwardsThomas Gleixner2-4/+34
We already catch most of the TSC problems by sanity checks, but there is a subtle bug which has been in the code forever. This can cause time jumps in the range of hours. This was reported in: http://lkml.org/lkml/2007/8/23/96 and http://lkml.org/lkml/2008/3/31/23 I was able to reproduce the problem with a gettimeofday loop test on a dual core and a quad core machine which both have sychronized TSCs. The TSCs seems not to be perfectly in sync though, but the kernel is not able to detect the slight delta in the sync check. Still there exists an extremly small window where this delta can be observed with a real big time jump. So far I was only able to reproduce this with the vsyscall gettimeofday implementation, but in theory this might be observable with the syscall based version as well. CPU 0 updates the clock source variables under xtime/vyscall lock and CPU1, where the TSC is slighty behind CPU0, is reading the time right after the seqlock was unlocked. The clocksource reference data was updated with the TSC from CPU0 and the value which is read from TSC on CPU1 is less than the reference data. This results in a huge delta value due to the unsigned subtraction of the TSC value and the reference value. This algorithm can not be changed due to the support of wrapping clock sources like pm timer. The huge delta is converted to nanoseconds and added to xtime, which is then observable by the caller. The next gettimeofday call on CPU1 will show the correct time again as now the TSC has advanced above the reference value. To prevent this TSC specific wreckage we need to compare the TSC value against the reference value and return the latter when it is larger than the actual TSC value. I pondered to mark the TSC unstable when the readout is smaller than the reference value, but this would render an otherwise good and fast clocksource unusable without a real good reason. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19x86: implement prctl PR_GET_TSC and PR_SET_TSCErik Bosman2-4/+107
This patch implements the PR_GET_TSC and PR_SET_TSC prctl() commands on the x86 platform (both 32 and 64 bit.) These commands control the ability to read the timestamp counter from userspace (the RDTSC instruction.) While the RDTSC instuction is a useful profiling tool, it is also the source of some non-determinism in ring-3. For deterministic replay applications it is useful to be able to trap and emulate (and record the outcome of) this instruction. This patch uses code earlier used to disable the timestamp counter for the SECCOMP framework. A side-effect of this patch is that the SECCOMP environment will now also disable the timestamp counter on x86_64 due to the addition of the TIF_NOTSC define on this platform. The code which enables/disables the RDTSC instruction during context switches is in the __switch_to_xtra function, which already handles other unusual conditions, so normal performance should not have to suffer from this change. Signed-off-by: Erik Bosman <ejbosman@cs.vu.nl> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19ftrace: add notrace annotations for NMI routinesSteven Rostedt4-14/+18
This annotates NMI functions with notrace. Some tracers may be able to live with this, but some cannot. The safest is to turn it off, it's not particularly interesting anyway. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: clean up =0 initializations in arch/x86/kernel/tsc_32.cPavel Machek1-4/+4
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: fix exec mappings commentsJiri Slaby1-2/+2
- noexec32 is on by default for years already - add noexec32 to kernel-parameters and fix noexec typo in there Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: cleanup: change _end to end_before_pgtYinghai Lu2-6/+6
cleanup: change the _end in compressed vmlinux_64.lds. also change _heap to _ebss that is not needed. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: cleanup boot-heap usageAlexander van Heukelum3-22/+23
The kernel decompressor wrapper uses memory located beyond the end of the image. This might lead to hard to debug problems, but even if it can be proven to be safe, it is at the very least unclean. I don't see any advantages either, unless you count it not being zeroed out as an advantage. This patch moves the boot-heap area to the bss segment. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: fix arch/x86/mm/ioremap.c warningRandy Dunlap1-2/+3
Fix printk formats in x86/mm/ioremap.c: next-20080410/arch/x86/mm/ioremap.c:137: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' next-20080410/arch/x86/mm/ioremap.c:188: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' next-20080410/arch/x86/mm/ioremap.c:188: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: e820_64, fix section mismatch warningJacek Luczak1-2/+2
fix section mismatch warnings which occurs on my x86_64 box while compiling linux-next-20080410: Warning messages: WARNING: arch/x86/kernel/built-in.o(.text+0x7bc2): Section mismatch in reference from the function bad_addr() to the variable .init.data:early_res The function bad_addr() references the variable __initdata early_res. This is often because bad_addr lacks a __initdata annotation or the annotation of early_res is wrong. WARNING: arch/x86/kernel/built-in.o(.text+0x7c3b): Section mismatch in reference from the function bad_addr_size() to the variable .init.data:early_res The function bad_addr_size() references the variable __initdata early_res. This is often because bad_addr_size lacks a __initdata annotation or the annotation of early_res is wrong. Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: remove vm86.h inclusion from process_32.cJacek Luczak1-1/+0
I've made a small investigation about vm86.h inclusion rules and it looks like everything is more or less ok. Files that rely on asm/vm86.h symbols are: - kprobes.c - process_32.c - signal_32.c - traps_32.c - vm86_32.c File process_32.c includes vm86.h explicitly. We can remove that include and it won't break anything. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: remove pointless commentsWANG Cong37-71/+0
Remove old comments that include the old arch/i386 directory. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: clean up cpu capabilities accesses, p4-clockmod.cIngo Molnar1-2/+2
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86_64: do not reserve ramdisk two timesYinghai Lu2-2/+7
ramdisk is reserved via reserve_early in x86_64_start_kernel, later early_res_to_bootmem() will convert to reservation in bootmem. so don't need to reserve that again. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: EFI_PAGE_SHIFT fixHuang, Ying2-11/+19
Make x86 EFI code works when EFI_PAGE_SHIFT != PAGE_SHIFT. The memrage_efi_to_native() provided in this patch can be used on other EFI platform such as IA64 too. This patch has been tested on Intel x86_64 platform with EFI 64/32 firmware. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: KGDB build fixIngo Molnar1-5/+1
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26Linus Torvalds5-10/+9
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits) [NET]: Fix and allocate less memory for ->priv'less netdevices [IPV6]: Fix dangling references on error in fib6_add(). [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found [PKT_SCHED]: Fix datalen check in tcf_simp_init(). [INET]: Uninline the __inet_inherit_port call. [INET]: Drop the inet_inherit_port() call. SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked. [netdrvr] forcedeth: internal simplifications; changelog removal phylib: factor out get_phy_id from within get_phy_device PHY: add BCM5464 support to broadcom PHY driver cxgb3: Fix __must_check warning with dev_dbg. tc35815: Statistics cleanup natsemi: fix MMIO for PPC 44x platforms [TIPC]: Cleanup of TIPC reference table code [TIPC]: Optimized initialization of TIPC reference table [TIPC]: Remove inlining of reference table locking routines e1000: convert uint16_t style integers to u16 ixgb: convert uint16_t style integers to u16 sb1000.c: make const arrays static sb1000.c: stop inlining largish static functions ...
2008-04-18x86 PAT: fix mmap() of holesIngo Molnar1-1/+1
do not return a -EINVAL when mmap()-ing PCI holes. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-19/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits) [SCSI] iscsi: bidi support for iscsi_tcp [SCSI] iscsi: bidi support at the generic libiscsi level [SCSI] iscsi: extended cdb support [SCSI] zfcp: Fix error handling for blocked unit for send FCP command [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock [SCSI] zfcp: fix 31 bit compile warnings [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands [SCSI] bsg: remove minor in struct bsg_device [SCSI] bsg: use better helper list functions [SCSI] bsg: replace kobject_get with blk_get_queue [SCSI] bsg: takes a ref to struct device in fops->open [SCSI] qla1280: remove version check [SCSI] libsas: fix endianness bug in sas_ata [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next) [SCSI] aacraid: Do not describe check_reset parameter with its value [SCSI] aacraid: Fix down_interruptible() to check the return value [SCSI] sun3_scsi_vme: add MODULE_LICENSE [SCSI] st: rename flush_write_buffer() [SCSI] tgt: use KMEM_CACHE macro [SCSI] initio: fix big endian problems for auto request sense ...
2008-04-18x86: kgdb build fixHarvey Harrison1-2/+2
TF_MASK is no longer defined, use X86_EFLAGS_TF. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18Merge branch 'release' of ↵Linus Torvalds34-526/+2645
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] kdump: Add crash_save_vmcoreinfo for INIT [IA64] Fix NUMA configuration issue [IA64] Itanium Spec updates [IA64] Untangle sync_icache_dcache() page size determination [IA64] arch/ia64/kernel/: use time_* macros [IA64] remove redundant display of free swap space in show_mem() [IA64] make IOMMU respect the segment boundary limits [IA64] kprobes: kprobe-booster for ia64 [IA64] fix getpid and set_tid_address fast system calls for pid namespaces [IA64] Replace explicit jiffies tests with time_* macros. [IA64] use goto to jump out do/while_each_thread [IA64] Fix unlock ordering in smp_callin [IA64] pgd_offset() constfication. [IA64] kdump: crash.c coding style fix [IA64] kdump: add kdump_on_fatal_mca [IA64] Minimize per_cpu reservations. [IA64] Correct pernodesize calculation. [IA64] Kernel parameter for max number of concurrent global TLB purges [IA64] Multiple outstanding ptc.g instruction support [IA64] Implement smp_call_function_mask for ia64 ...
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds31-410/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits) ide: remove ide_init_default_irq() macro ide: move default IDE ports setup to ide_generic host driver ide: remove obsoleted "idex=noprobe" kernel parameter (take 2) ide: remove needless hwif->irq check from ide_hwif_configure() ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers ide: limit legacy VLB host drivers to alpha, x86 and mips cmd640: init hwif->{io_ports,irq} explicitly cmd640: cleanup setup_device_ptrs() ide: add ide-4drives host driver (take 3) ide: remove ppc ifdef from init_ide_data() ide: remove ide_default_io_ctl() macro ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2) ppc/pmac: remove no longer needed IDE quirk ppc: don't include <linux/ide.h> ppc: remove ppc_ide_md ppc/pplus: remove ppc_ide_md.ide_init_hwif hook ppc/sandpoint: remove ppc_ide_md hooks ppc/lopec: remove ppc_ide_md hooks ppc/mpc8xx: remove ppc_ide_md hooks ...