summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-10-26ARM64: dts: amlogic: adds crypto hardware nodeCorentin Labbe1-0/+10
This patch adds the GXL crypto hardware node for all GXL SoCs. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson-gxbb-vega-s95: set rc-vega-s9x ir keymapChristian Hewitt1-0/+1
Add the rc-vega-s9x keymap to the existing IR node in the device tree. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymapChristian Hewitt1-0/+4
Add an IR node to the Vega S96 dts to include the rc-vega-s9x keymap. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: g12b: add cooling propertiesGuillaume La Roque2-0/+30
Add missing #colling-cells field for G12B SoC Add cooling-map for passive and hot trip point Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: g12a: add cooling propertiesGuillaume La Roque1-0/+24
Add missing #colling-cells field for G12A SoC Add cooling-map for passive and hot trip point Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: g12: Add minimal thermal zoneGuillaume La Roque1-0/+57
Add minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU) Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: g12: add temperature sensorGuillaume La Roque1-0/+20
Add cpu and ddr temperature sensors for G12 Socs Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: sei610: enable audioJerome Brunet1-0/+205
Add and enable the audio devices on the sei610. The new FRDDR/TODDR D of the SM1 have been left out on purpose. The plaftorm has 2 possible playback interfaces and 3 possible capture interfaces. 3 pcm interfaces for each direction is enough. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-17arm64: dts: meson: sm1: add audio devicesJerome Brunet1-0/+327
Add the audio devices found on the SM1 SoC family. Only the spdif output and input are missing. These are not supported yet since no platform is available to them. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-g12: add support for simplefbNeil Armstrong3-0/+42
SimpleFB allows transferring a framebuffer from the firmware/bootloader to the kernel, while making sure the related clocks and power supplies stay enabled. Add nodes for CVBS and HDMI Simple Framebuffers, based on the GXBB/GXL/GXM support at [1]. [1] 03b370357907 ("arm64: dts: meson-gx: add support for simplef") Cc: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: g12a: add audio devices resetsJerome Brunet1-6/+22
Provide the reset lines coming from the audio clock controller to the audio devices of the g12 family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supplyAnand Moon1-0/+10
As per schematics HDMI_P5V0 is supplied by P5V0 so add missing link. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 ↵Anand Moon1-3/+10
regulator As per schematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which is supplied by VDDIO_AO3V3. While here, move the comment name with the signal name in the schematics above the gpio property to make it consistent with other regulators. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulatorAnand Moon1-0/+30
As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC: fixed regulator output which is supplied by P5V0. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: libretech-cc: update model and compatibleChristian Hewitt1-2/+3
Shorten the model description to improve readability in some app GUIs that show the string. Update compatible to be more descriptive, using the format of the LaFrite board in meson-gxl-s805x-libretech-ac.dts. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: libretech-ac: update model descriptionChristian Hewitt1-1/+1
Shorten the model description to improve readability in some app GUIs that show the string. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-gxm-khadas-vim2: fix uart_A bluetooth nodeChristian Hewitt1-0/+3
Fixes: 33344e2111a3 ("arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-gxl-s905x-khadas-vim: fix uart_A bluetooth nodeChristian Hewitt1-0/+3
Fixes: dd5297cc8b8b ("arm64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled nodeChristian Hewitt1-3/+1
Fix DTC warnings: arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warningAnand Moon1-2/+2
usb_otg bus needs to get initialize from the u-boot to be configured to used as power source to SBC or usb otg port will get configured as host device. Right now this support is missing in the u-boot and phy driver so to avoid power failed warning, we would disable this feature until proper fix is found. [ 2.716048] phy phy-c0000000.phy.0: USB ID detect failed! [ 2.720186] phy phy-c0000000.phy.0: phy poweron failed --> -22 [ 2.726001] ------------[ cut here ]------------ [ 2.730583] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8 [ 2.738983] Modules linked in: [ 2.742005] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.9-1-ARCH #1 [ 2.748643] Hardware name: Hardkernel ODROID-C2 (DT) [ 2.753566] Workqueue: events deferred_probe_work_func [ 2.758649] pstate: 60000005 (nZCv daif -PAN -UAO) [ 2.763394] pc : _regulator_put+0x3c/0xe8 [ 2.767361] lr : _regulator_put+0x3c/0xe8 [ 2.771326] sp : ffff000011aa3a50 [ 2.774604] x29: ffff000011aa3a50 x28: ffff80007ed1b600 [ 2.779865] x27: ffff80007f7036a8 x26: ffff80007f7036a8 [ 2.785126] x25: 0000000000000000 x24: ffff000011a44458 [ 2.790387] x23: ffff000011344218 x22: 0000000000000009 [ 2.795649] x21: ffff000011aa3b68 x20: ffff80007ed1b500 [ 2.800910] x19: ffff80007ed1b500 x18: 0000000000000010 [ 2.806171] x17: 000000005be5943c x16: 00000000f1c73b29 [ 2.811432] x15: ffffffffffffffff x14: ffff0000117396c8 [ 2.816694] x13: ffff000091aa37a7 x12: ffff000011aa37af [ 2.821955] x11: ffff000011763000 x10: ffff000011aa3730 [ 2.827216] x9 : 00000000ffffffd0 x8 : ffff000010871760 [ 2.832477] x7 : 00000000000000d0 x6 : ffff0000119d151b [ 2.837739] x5 : 000000000000000f x4 : 0000000000000000 [ 2.843000] x3 : 0000000000000000 x2 : 38104b2678c20100 [ 2.848261] x1 : 0000000000000000 x0 : 0000000000000024 [ 2.853523] Call trace: [ 2.855940] _regulator_put+0x3c/0xe8 [ 2.859562] regulator_put+0x34/0x48 [ 2.863098] regulator_bulk_free+0x40/0x58 [ 2.867153] devm_regulator_bulk_release+0x24/0x30 [ 2.871896] release_nodes+0x1f0/0x2e0 [ 2.875604] devres_release_all+0x64/0xa4 [ 2.879571] really_probe+0x1c8/0x3e0 [ 2.883194] driver_probe_device+0xe4/0x138 [ 2.887334] __device_attach_driver+0x90/0x110 [ 2.891733] bus_for_each_drv+0x8c/0xd8 [ 2.895527] __device_attach+0xdc/0x160 [ 2.899322] device_initial_probe+0x24/0x30 [ 2.903463] bus_probe_device+0x9c/0xa8 [ 2.907258] deferred_probe_work_func+0xa0/0xf0 [ 2.911745] process_one_work+0x1b4/0x408 [ 2.915711] worker_thread+0x54/0x4b8 [ 2.919334] kthread+0x12c/0x130 [ 2.922526] ret_from_fork+0x10/0x1c [ 2.926060] ---[ end trace 51a68f4c0035d6c0 ]--- [ 2.930691] ------------[ cut here ]------------ [ 2.935242] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8 [ 2.943653] Modules linked in: [ 2.946675] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G W 5.2.9-1-ARCH #1 [ 2.954694] Hardware name: Hardkernel ODROID-C2 (DT) [ 2.959613] Workqueue: events deferred_probe_work_func [ 2.964700] pstate: 60000005 (nZCv daif -PAN -UAO) [ 2.969445] pc : _regulator_put+0x3c/0xe8 [ 2.973412] lr : _regulator_put+0x3c/0xe8 [ 2.977377] sp : ffff000011aa3a50 [ 2.980655] x29: ffff000011aa3a50 x28: ffff80007ed1b600 [ 2.985916] x27: ffff80007f7036a8 x26: ffff80007f7036a8 [ 2.991177] x25: 0000000000000000 x24: ffff000011a44458 [ 2.996439] x23: ffff000011344218 x22: 0000000000000009 [ 3.001700] x21: ffff000011aa3b68 x20: ffff80007ed1bd00 [ 3.006961] x19: ffff80007ed1bd00 x18: 0000000000000010 [ 3.012222] x17: 000000005be5943c x16: 00000000f1c73b29 [ 3.017484] x15: ffffffffffffffff x14: ffff0000117396c8 [ 3.022745] x13: ffff000091aa37a7 x12: ffff000011aa37af [ 3.028006] x11: ffff000011763000 x10: ffff000011aa3730 [ 3.033267] x9 : 00000000ffffffd0 x8 : ffff000010871760 [ 3.038528] x7 : 00000000000000fd x6 : ffff0000119d151b [ 3.043790] x5 : 000000000000000f x4 : 0000000000000000 [ 3.049051] x3 : 0000000000000000 x2 : 38104b2678c20100 [ 3.054312] x1 : 0000000000000000 x0 : 0000000000000024 [ 3.059574] Call trace: [ 3.061991] _regulator_put+0x3c/0xe8 [ 3.065613] regulator_put+0x34/0x48 [ 3.069149] regulator_bulk_free+0x40/0x58 [ 3.073203] devm_regulator_bulk_release+0x24/0x30 [ 3.077947] release_nodes+0x1f0/0x2e0 [ 3.081655] devres_release_all+0x64/0xa4 [ 3.085622] really_probe+0x1c8/0x3e0 [ 3.089245] driver_probe_device+0xe4/0x138 [ 3.093385] __device_attach_driver+0x90/0x110 [ 3.097784] bus_for_each_drv+0x8c/0xd8 [ 3.101578] __device_attach+0xdc/0x160 [ 3.105373] device_initial_probe+0x24/0x30 [ 3.109514] bus_probe_device+0x9c/0xa8 [ 3.113309] deferred_probe_work_func+0xa0/0xf0 [ 3.117796] process_one_work+0x1b4/0x408 [ 3.121762] worker_thread+0x54/0x4b8 [ 3.125384] kthread+0x12c/0x130 [ 3.128575] ret_from_fork+0x10/0x1c [ 3.132110] ---[ end trace 51a68f4c0035d6c1 ]--- [ 3.136753] dwc2: probe of c9000000.usb failed with error -22 Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: Add missing linking regulator to usb busAnand Moon1-0/+7
Add missing linking regulator node to usb bus for power usb devices. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> [ khilman: minor typo fixup ] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: p5v0 is the main 5V power inputAnand Moon1-0/+9
As per the schematic Monolithic Power Systems MP2161GJ-C499 supply a fixed output voltage of 5.0V. This supplies linked to VDD_EE, HDMI_P5V0, USB_POWER, VCCK, VDDIO_AO1V8, VDDIO_AO3V3, VDD3V3, DDR3_1V5 according to the schematics. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-g12b-ugoos-am6: add initial device-treeChristian Hewitt2-0/+558
The Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the S922X chipset. Hardware specifications: - 2GB LPDDR4 RAM - 16GB eMMC storage - 10/100/1000 Base-T Ethernet using External RGMII PHY - 802.11 a/b/g/b/ac + BT 5.0 sdio wireless (Ampak 6398S) - HDMI 2.0 (4k@60p) video - Composite video + 2-channel audio output on 3.5mm jack - S/PDIF audio output - Aux input - 1x USB 3.0 - 3x USB 2.0 - 1x micro SD card slot The device-tree is largely based on meson-g12b-odroid-n2 but with audio and USB config copied from meson-g12a-x96-max. Tested-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: Add capacity-dmips-mhz attributes to G12BFrank Hartung1-0/+6
Meson G12B SoCs (S922X and A311D) are a big-little design where not all CPUs are equal; the A53s cores are weaker than the A72s. Include capacity-dmips-mhz properties to tell the OS there is a difference in processing capacity. The dmips values are based on similar submissions for other A53/A72 SoCs: HiSilicon 3660 [1] and Rockchip RK3399 [2]. This change is particularly beneficial for use-cases like retro gaming where emulators often run on a single core. The OS now chooses an A72 core instead of an A53 core. [1] https://lore.kernel.org/patchwork/patch/862742/ [2] https://patchwork.kernel.org/patch/10836577/ Signed-off-by: Frank Hartung <supervisedthinking@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: add support for A1 based Amlogic AD401Jianxin Pan3-0/+161
Add basic support for the Amlogic A1 based Amlogic AD401 board: which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: khadas-vim3: add commented support for PCIeNeil Armstrong4-0/+79
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. The needed DT configuration when the MCU is configured to mux the PCIe/USB3.0 differential lines to the M.2 Key M slot is added commented and may be uncommented to disable USB3.0 from the USB Complex and enable the PCIe controller. The End User is not expected to uncomment the following except for testing purposes, but instead rely on the firmware/bootloader to update these nodes accordingly if PCIe mode is selected by the MCU. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12a: Add PCIe nodeNeil Armstrong2-0/+37
This adds the Amlogic G12A PCI Express controller node, also using the USB3+PCIe Combo PHY. The PHY mode selection is static, thus the USB3+PCIe Combo PHY phandle would need to be removed from the USB control node if the shared differential lines are used for PCIe instead of USB3. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: Link nvmem and secure-monitor nodesCarlo Caione3-0/+3
The former is going to use the latter to retrieve the efuses data. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12b-khadas-vim3: add keep-power-in-suspend property in ↵Neil Armstrong1-0/+3
SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-sm1-sei610: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxm-rbox-pro: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxm-khadas-vim2: add keep-power-in-suspend property in ↵Neil Armstrong1-0/+3
SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxl-s905x-p212: add keep-power-in-suspend property in SDIO ↵Neil Armstrong1-0/+3
node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxl-s905x-nexbox-a95x: add keep-power-in-suspend property ↵Neil Armstrong1-0/+3
in SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxl-s805x-p241: add keep-power-in-suspend property in SDIO ↵Neil Armstrong1-0/+3
node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-wetek: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-vega-s95: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-p20x: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-nexbox-a95x: add keep-power-in-suspend property in ↵Neil Armstrong1-0/+3
SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-nanopi-k2: add keep-power-in-suspend property in SDIO ↵Neil Armstrong1-0/+3
node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12a-x96-max: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12a-sei510: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: move audio bus out of g12-commonJerome Brunet2-320/+324
The base address of the audio bus and pdm device are different between the g12 and sm1 SoC families. Overwriting the reg property only would leave with confusing node names on the sm1. Move the audio related devices to the g12 dtsi. The appropriate nodes will be created for the sm1 later on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: factor the power domain.Jerome Brunet3-25/+13
The power domain declared in the g12a and g12b dtsi are the same. Move the declaration of these power domains in the g12 common dtsi. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: add a g12 layerJerome Brunet3-2/+9
While the sm1 is very close to the g12a/b family, somethings apply differently on the g12a/b and not the sm1. This introduce a new layer of dtsi for part which apply to the g12a and g12b but not the sm1. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: fix audio fifo reg sizeJerome Brunet1-6/+6
The register region size initially is too small to access all the fifo registers. Fixes: c59b7fe5aafd ("arm64: dts: meson: g12a: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: axg: fix audio fifo reg sizeJerome Brunet1-6/+6
The register region size initially is too small to access all the fifo registers. Fixes: f2b8f6a93357 ("arm64: dts: meson-axg: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: sm1: set gpio interrupt controller compatibleJerome Brunet1-0/+5
Set the appropriate gpio interrupt controller compatible for the sm1 SoC family. This newer version of the controller can now trig irq on both edge of the input signal Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-09-30Merge tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds17-212/+291
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 17:39:21 +0000