summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2013-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller150-956/+1662
Merge net into net-next because some upcoming net-next changes build on top of bug fixes that went into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-24Merge branch 'merge' of ↵Linus Torvalds12-57/+127
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Some more P8 related bits, a bunch of fixes for our P7+/P8 HW crypto drivers, some added workarounds for those radeons that don't do proper 64-bit MSIs and a couple of other trivialities by myself." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support powerpc/powernv: Build a zImage.epapr powerpc: Make radeon 32-bit MSI quirk work on powernv powerpc: Context switch more PMU related SPRs powerpc/powernv: Fix condition for when to invalidate the TCE cache powerpc/pci: Fix bogus message at boot about empty memory resources powerpc: Fix TLB cleanup at boot on POWER8 drivers/crypto/nx: Fixes for multiple races and issues
2013-05-24powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware supportBrian King1-3/+37
Recent commit e61133dda480062d221f09e4fc18f66763f8ecd0 added support for a new firmware feature to force an adapter to use 32 bit MSIs. However, this firmware is not available for all systems. The hack below allows devices needing 32 bit MSIs to work on these systems as well. It is careful to only enable this on Gen2 slots, which should limit this to configurations where this hack is needed and tested to work. [Small change to factor out the hack into a separate function -- BenH] Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc/powernv: Build a zImage.epaprBenjamin Herrenschmidt1-0/+1
The zImage.epapr wrapper allows to use zImages when booting via a flat device-tree which can be used on powernv. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc: Make radeon 32-bit MSI quirk work on powernvBenjamin Herrenschmidt6-48/+38
This moves the quirk itself to pci_64.c as to get built on all ppc64 platforms (the only ones with a pci_dn), factors the two implementations of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit MSIs on IODA based powernv platforms. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc: Context switch more PMU related SPRsMichael Ellerman3-0/+40
In commit 9353374 "Context switch the new EBB SPRs" we added support for context switching some new EBB SPRs. However despite four of us signing off on that patch we missed some. To be fair these are not actually new SPRs, but they are now potentially user accessible so need to be context switched. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc/powernv: Fix condition for when to invalidate the TCE cacheBenjamin Herrenschmidt1-1/+1
We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc/pci: Fix bogus message at boot about empty memory resourcesBenjamin Herrenschmidt1-3/+4
The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc: Fix TLB cleanup at boot on POWER8Benjamin Herrenschmidt1-2/+6
The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-23Merge tag 'pci-v3.10-fixes-2' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Here are some more fixes for v3.10. The Moorestown update broke Intel Medfield devices, so I reverted it. The acpiphp change fixes a regression: we broke hotplug notifications to host bridges when we split acpiphp into the host-bridge related part and the endpoint-related part. Moorestown Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" Hotplug PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check" * tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check
2013-05-23Merge tag 'usb-3.10-rc2' of ↵Linus Torvalds6-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
2013-05-23Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-9/+26
Pull kvm bugfixes from Gleb Natapov. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock() KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API. KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry
2013-05-22Merge branch 'for-linus' of ↵Linus Torvalds7-35/+8
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull AVR32 update from Hans-Christian Egtvedt: "wow, it has gone 10 releases since my last request :(" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: fix building warnings caused by redefinitions of HZ avr32: fix relocation check for signed 18-bit offset avr32: move NODES_SHIFT into Kconfig and delete numnodes.h
2013-05-22Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds28-237/+306
Pull MIPS update from Ralf Baechle: - Fix a build error if <linux/printk.h> is included without <linux/linkage.h> having been included before. - Cleanup and fix the damage done by the generic idle loop patch. - A kprobes fix that brings the MIPS code in line with what other architectures are for quite a while already. - Wire up the native getdents64(2) syscall for 64 bit - for some reason it was only for the compat ABIs. This has been reported to cause an application issue. This turned out bigger than I meant but the wait instruction support code was driving me nuts. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: N64: Wire getdents64(2) kprobes/mips: Fix to check double free of insn slot MIPS: Idle: Break r4k_wait into two functions and fix it. MIPS: Idle: Do address fiddlery in helper functions. MIPS: Idle: Consolidate all declarations in <asm/idle.h>. MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations. MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait. MIPS: Idle: Make call of function pointer readable. MIPS: Idle: Consistently reformat inline assembler. MIPS: Idle: cleaup SMTC idle hook as per Linux coding style. MIPS: Consolidate idle loop / WAIT instruction support in a single file. MIPS: clock.h: Remove declaration of cpu_wait. Add include dependencies to <linux/printk.h>. MIPS: Rewrite pfn_valid to work in modules, too.
2013-05-22avr32: fix building warnings caused by redefinitions of HZJiang Liu4-27/+2
As suggested by David Howells <dhowells@redhat.com>, use asm-generic/param.h and uapi/asm-generic/param.h for AVR32. It also fixes building warnings caused by redefinitions of HZ: In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4, from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2013-05-22MIPS: N64: Wire getdents64(2)Aron Xu2-2/+4
As a relatively new ABI, N64 only had getdents syscall while other modern architectures have getdents64. This was noticed when Python 3.3 shifted to the latter one for aarch64. [ralf@linux-mips.org: The history of getdents64 is a little complicated. Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.] added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213, then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.] Signed-off-by: Aron Xu <aron@debian.org> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22kprobes/mips: Fix to check double free of insn slotMasami Hiramatsu1-1/+4
Fix to check double free of insn_slot at arch_remove_kprobe as other arches do. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Maneesh Soni <manesoni@cisco.com> Cc: Victor Kamensky <kamensky@cisco.com> Cc: linux-mips@linux-mips.org Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: yrl.pp-manager.tt@hitachi.com Cc: systemtap@sourceware.org Patchwork: https://patchwork.linux-mips.org/patch/5293/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock()Sanjay Lal1-9/+26
- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock(). Memory slots should be acccessed from a SRCU read section. - kvm_mips_map_page() now returns an error code to it's callers, instead of calling panic() if it cannot find a mapping for a particular gfn. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-22KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a ↵Sanjay Lal1-0/+0
user visible API. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-22MIPS: Idle: Break r4k_wait into two functions and fix it.Ralf Baechle3-4/+11
local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Do address fiddlery in helper functions.Ralf Baechle3-6/+15
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle19-5/+28
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations.Ralf Baechle1-3/+0
The generic idle loop has already disabled interrupts so this is redundant. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait.Ralf Baechle1-0/+2
Without this, the WARN_ON_ONCE(irqs_disabled()); in the idle loop will be triggered. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Make call of function pointer readable.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Consistently reformat inline assembler.Ralf Baechle1-18/+21
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: cleaup SMTC idle hook as per Linux coding style.Ralf Baechle1-2/+7
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Consolidate idle loop / WAIT instruction support in a single file.Ralf Baechle4-212/+233
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: clock.h: Remove declaration of cpu_wait.Ralf Baechle1-2/+0
Duplicate and has no business in this header file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21Merge branch 'for-linus' of ↵Linus Torvalds10-30/+27
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "An additional sysfs attribute for channel paths and a couple of bux fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: fix ipte notify bit s390/xpram: mark xpram as non-rotational s390/smp: fix cpu re-scan vs. cpu state s390/cio: add channel ID sysfs attribute s390/ftrace: fix mcount adjustment s390: fix gmap_ipte_notifier vs. software dirty pages s390: disable pfmf for clear page instruction s390/disassembler: prevent endless loop in print_fn_code() s390: remove non existent reference to GENERIC_KERNEL_THREAD
2013-05-21ARM: smp: Drop RCU_NONIDLE usage in cpu_die()Stephen Boyd1-1/+1
Before f7b861b7a6d9 ("arm: Use generic idle loop") ARM would kill the CPU within the rcu idle section. Now that the rcu_idle_enter()/exit() pair have been pushed lower down in the idle loop this is no longer true and so using RCU_NONIDLE here is no longer necessary and also harmful because RCU is not actually idle at this point. Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-20arm: bpf_jit: can call module_free() from any contextDaniel Borkmann1-15/+3
Follow-up on module_free()/vfree() that takes care of the rest, so no longer this workaround with work_struct needed. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20ppc: bpf_jit: can call module_free() from any contextDaniel Borkmann1-16/+3
Followup patch on module_free()/vfree() that takes care of the rest, so no longer this workaround with work_struct is needed. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matt Evans <matt@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20x86: Fix bit corruption at CPU resume timeLinus Torvalds1-1/+1
In commit 78d77df71510 ("x86-64, init: Do not set NX bits on non-NX capable hardware") we added the early_pmd_flags that gets the NX bit set when a CPU supports NX. However, the new variable was marked __initdata, because the main _use_ of this is in an __init routine. However, the bit setting happens from secondary_startup_64(), which is called not only at bootup, but on every secondary CPU start. Including resuming from STR and at CPU hotplug time. So the value cannot be __initdata. Reported-bisected-and-tested-by: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # v3.9 Acked-by: Peter Anvin <hpa@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-20Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, ↵Bjorn Helgaas1-6/+4
00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko <andy.shevchenko@gmail.com> reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-19x86: bpf_jit_comp: secure bpf jit against spraying attacksEric Dumazet1-6/+47
hpa bringed into my attention some security related issues with BPF JIT on x86. This patch makes sure the bpf generated code is marked read only, as other kernel text sections. It also splits the unused space (we vmalloc() and only use a fraction of the page) in two parts, so that the generated bpf code not starts at a known offset in the page, but a pseudo random one. Refs: http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html Reported-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19MIPS: Rewrite pfn_valid to work in modules, too.Ralf Baechle1-8/+7
This fixes: MODPOST 393 modules ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined! make[3]: *** [__modpost] Error 1 It would have been possible to just export min_low_pfn but in the end pfn_valid should return 1 for any pfn argument for which a struct page exists so using min_low_pfn was wrong anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-18Merge branch 'devm_no_resource_check' of ↵Linus Torvalds3-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull devm usage cleanup from Wolfram Sang: "Lately, I have been experimenting how to improve the devm interface to make writing device drivers easier and less error prone while also getting rid of its subtle issues. I think it has more potential but still needs work and definately conistency, especiall in its usage. The first thing I come up with is a low hanging fruit regarding devm_ioremap_resouce(). This function already checks if the passed resource is valid and gives an error message if not. So, we can remove similar checks from the drivers and get rid of a bit of code and a number of inconsistent error strings. This series only removes the unneeded check iff devm_ioremap_resource follows platform_get_resource directly. The previous version tried to shuffle code if needed, too, what lead to an embarrasing bug. It turned out to me that shuffling code for all cases found will make the automated script too complex, so I am unsure if an automated cleanup is the proper tool for this case. Removing the easy stuff seems worthwhile to me, though. Despite various architectures and platform dependencies, I managed to compile test 45 out of 57 modified files locally using heuristics and defconfigs." Pulled because: 296 deletions, 0 additions. * 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits) sound/soc/kirkwood: don't check resource with devm_ioremap_resource sound/soc/fsl: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource arch/arm/plat-samsung: don't check resource with devm_ioremap_resource arch/arm/mach-tegra: don't check resource with devm_ioremap_resource drivers/watchdog: don't check resource with devm_ioremap_resource drivers/w1/masters: don't check resource with devm_ioremap_resource drivers/video/omap2/dss: don't check resource with devm_ioremap_resource drivers/video/omap2: don't check resource with devm_ioremap_resource drivers/usb/phy: don't check resource with devm_ioremap_resource drivers/usb/host: don't check resource with devm_ioremap_resource drivers/usb/gadget: don't check resource with devm_ioremap_resource drivers/usb/chipidea: don't check resource with devm_ioremap_resource drivers/thermal: don't check resource with devm_ioremap_resource drivers/staging/nvec: don't check resource with devm_ioremap_resource drivers/staging/dwc2: don't check resource with devm_ioremap_resource drivers/spi: don't check resource with devm_ioremap_resource drivers/rtc: don't check resource with devm_ioremap_resource drivers/pwm: don't check resource with devm_ioremap_resource drivers/pinctrl: don't check resource with devm_ioremap_resource ...
2013-05-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds21-199/+149
Pull MIPS fixes from Ralf Baechle: "Patching up across the field. The reversion of the two ASID patches is particularly important as it was breaking many platforms." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: use the dwc2 driver for the rt305x USB controller MIPS: Extract schedule_mfi info from __schedule MIPS: Fix sibling call handling in get_frame_info MIPS: MSP71xx: remove inline marking of EXPORT_SYMBOL functions MIPS: Make virt_to_phys() work for all unmapped addresses. MIPS: Fix build error for crash_dump.c in 3.10-rc1 MIPS: Xway: Fix clk leak Revert "MIPS: Allow ASID size to be determined at boot time." Revert "MIPS: microMIPS: Support dynamic ASID sizing."
2013-05-18Merge tag 'arm64-fixes' of ↵Linus Torvalds7-19/+9
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: "Fixes for duplicate definition of early_console, kernel/time/Kconfig include, __flush_dcache_all() set/way computing, debug (locking, bit testing). The of_platform_populate() was moved to an arch_init_call() to allow subsys_init_call() drivers to probe the DT." * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: debug: fix mdscr.ss check when enabling debug exceptions arm64: Do not source kernel/time/Kconfig explicitly arm64: mm: Fix operands of clz in __flush_dcache_all arm64: Invoke the of_platform_populate() at arch_initcall() level arm64: debug: clear mdscr_el1 instead of taking the OS lock arm64: Fix duplicate definition of early_console
2013-05-18arch/mips/lantiq/xway: don't check resource with devm_ioremap_resourceWolfram Sang1-4/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: John Crispin <blogic@openwrt.org>
2013-05-18arch/arm/plat-samsung: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-18arch/arm/mach-tegra: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-05-17sparc: bpf_jit_comp: can call module_free() from any contextEric Dumazet1-17/+3
module_free()/vfree() takes care of details, we no longer need a wrapper and a work_struct. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17x86: bpf_jit_comp: can call module_free() from any contextEric Dumazet1-17/+3
It looks like we can call module_free()/vfree() from softirq context, so no longer need a wrapper and a work_struct. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17MIPS: ralink: use the dwc2 driver for the rt305x USB controllerMatthijs Kooijman2-0/+14
This sets up the devicetree file for the rt3050 chip series and rt3052 eval board to use the right compatible string for the dwc2 driver. Acked-by: John Crispin <blogic@openwrt.org> Cc: blogic@openwrt.org Cc: linux-mips@linux-mips.org Cc: Matthijs Kooijman <matthijs@stdin.nl> Patchwork: https://patchwork.linux-mips.org/patch/5226/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17MIPS: Extract schedule_mfi info from __scheduleTony Wu1-2/+32
schedule_mfi is supposed to be extracted from schedule(), and is used in thread_saved_pc and get_wchan. But, after optimization, schedule() is reduced to a sibling call to __schedule(), and no real frame info can be extracted. One solution is to compile schedule() with -fno-omit-frame-pointer and -fno-optimize-sibling-calls, but that will incur performance degradation. Another solution is to extract info from the real scheduler, __schedule, and this is the approache adopted here. This patch reads the __schedule address by either following the 'j' call in schedule if KALLSYMS is disabled or by using kallsyms_lookup_name to lookup __schedule if KALLSYMS is available, then, extracts schedule_mfi from __schedule frame info. This patch also fixes the "Can't analyze schedule() prologue" warning at boot time. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5237/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17MIPS: Fix sibling call handling in get_frame_infoTony Wu1-2/+4
Given a function, get_frame_info() analyzes its instructions to figure out frame size and return address. get_frame_info() works as follows: 1. analyze up to 128 instructions if the function size is unknown 2. search for 'addiu/daddiu sp,sp,-immed' for frame size 3. search for 'sw ra,offset(sp)' for return address 4. end search when it sees jr/jal/jalr This leads to an issue when the given function is a sibling call, example shown as follows. 801ca110 <schedule>: 801ca110: 8f820000 lw v0,0(gp) 801ca114: 8c420000 lw v0,0(v0) 801ca118: 080726f0 j 801c9bc0 <__schedule> 801ca11c: 00000000 nop 801ca120 <io_schedule>: 801ca120: 27bdffe8 addiu sp,sp,-24 801ca124: 3c028022 lui v0,0x8022 801ca128: afbf0014 sw ra,20(sp) In this case, get_frame_info() cannot properly detect schedule's frame info, and eventually returns io_schedule's instead. This patch adds 'j' to the end search condition to workaround sibling call cases. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17MIPS: MSP71xx: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov1-1/+1
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: trivial@kernel.org Cc: ldv-project@linuxtesting.org Patchwork: https://patchwork.linux-mips.org/patch/5227/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17MIPS: Make virt_to_phys() work for all unmapped addresses.David Daney2-2/+2
As reported: This problem was discovered when doing BGP traffic with the TCP MD5 option activated, where the following call chain caused a crash: * tcp_v4_rcv * tcp_v4_timewait_ack * tcp_v4_send_ack -> follow stack variable rep.th * tcp_v4_md5_hash_hdr * tcp_md5_hash_header * sg_init_one * sg_set_buf * virt_to_page I noticed that tcp_v4_send_reset uses a similar stack variable and also calls tcp_v4_md5_hash_hdr, so it has the same problem. The networking core can indirectly call virt_to_phys() on stack addresses, if this is done from PID 0, the stack will usually be in CKSEG0, so virt_to_phys() needs to work there as well Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Jiang Liu <liuj97@gmail.com> Cc: eunb.song@samsung.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5220/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 10:33:46 +0000