summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-11-24MIPS: ralink: allow manual memory overrideJohn Crispin1-1/+15
RT5350 relies on the bootloader setting up the memc correctly. On some boards the setup is incorrect leading to 32 MB being available but only 16 MB being recognized. Allow these boards to manually override the memory range. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8004/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ralink: add illegal access driverJohn Crispin2-0/+89
These SoCs have a special irq that fires upon an illegal memmory access. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8003/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ralink: add rt_sysc_m32 helperJohn Crispin1-0/+7
We already have a read and write wrapper. This adds the missing mask wrapper. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ralink: add a helper for reading the ECO versionJohn Crispin1-0/+5
Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8000/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ralink: add verbose pmu infoJohn Crispin1-0/+26
Print the PMU and LDO settings on boot. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/7999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: add missing spi clock on falcon SoCJohn Crispin1-0/+2
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8050/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: the detection of the gpe clock is brokenJohn Crispin1-5/+4
The code to detect unfused SoCs was broken due to missing register masking. Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8049/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: copy the commandline from the devicetreeJohn Crispin1-0/+2
This is a regression caused by: commit afb46f7996e91aeb36e07bc92cf96e8045bec00e Author: Rob Herring <robh@kernel.org> Date: Wed Apr 2 19:07:24 2014 -0500 mips: ralink: convert to use unflatten_and_copy_device_tree Make the of init code reuse the cmdline defined inside the dts. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8048/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: move eiu init after irq_domain registerJohn Crispin1-24/+24
The eiu init failed as the irq_domain was not yet available. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8047/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: export soc typeJohn Crispin2-0/+7
The voice and dsl drivers need to know which SoC we are running on. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/8046/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: add support for xrx200 firmware depending on soc typeJohn Crispin1-1/+22
VR9 needs different firmware files for the various phy/soc revisions. Some boards are ship with older and newer SoC revisions. To be able to boot a single image on all versions we need to define both firmware files inside the devicetree. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: reboot gphy on restartJohn Crispin1-1/+8
A reboot sometimes lead to a none working phy. An explicit reboot fixes the problem. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8044/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: add reset-controller api supportJohn Crispin2-0/+63
Add a reset-controller binding for the reset registers found on the lantiq SoC. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: lantiq: handle vmmc memory reservationJohn Crispin2-0/+71
The Lantiq SoCs have a 2nd mips core called "voice mips macro core (vmmc)" which is used to run the voice firmware. This driver allows us to register a chunk of memory that the voice driver can later use for the 2nd core. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8042/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Alchemy: Remove direct access to prepare_count field of struct clkTomeu Vizoso1-4/+3
Replacing it with a call to __clk_is_prepared(), which isn't entirely equivalent but in practice shouldn't matter. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8120/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24clocksource: mips-gic: Use CPU notifiers to setup the timerAndrew Bresticker1-4/+1
Instead of requiring an explicit call to gic_clockevent_init in the SMP startup path, use CPU notifiers to register and enable the GIC timer on CPU startup. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8139/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24clocksource: mips-gic: Move gic_frequency to clocksource driverAndrew Bresticker1-0/+2
There's no reason for gic_frequency to be global any more and it certainly doesn't belong in the GIC irqchip driver, so move it to the GIC clocksource driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8137/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24clocksource: mips-gic: Combine with GIC clockevent driverAndrew Bresticker4-118/+1
Combine the GIC clocksource driver with the GIC clockevent driver from arch/mips/kernel/cevt-gic.c and remove the clockevent driver's separate Kconfig symbol. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8132/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Move GIC clocksource driver to drivers/clocksource/Andrew Bresticker4-40/+3
Move the GIC clocksource driver to drivers/clocksource/mips-gic-timer.c. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: bcm3384: Initial commit of bcm3384 platform supportKevin Cernekee13-0/+698
This supports SMP Linux running on the BCM3384 Zephyr (BMIPS5000) application processor, with fully functional UART and USB 1.1/2.0. Device Tree is used to configure the following items: - All peripherals - Early console base address - SMP or UP mode - MIPS counter frequency - Memory size / regions - DMA offset - Kernel command line The DT-enabled bootloader and build instructions are posted at https://github.com/Broadcom/aeolus Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8170/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Create a helper function for DT setupKevin Cernekee4-22/+22
A couple of platforms register two buses and call of_platform_populate(). Move this into a common function to reduce duplication. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)Kevin Cernekee2-0/+2
This is a dual core (quad thread) BMIPS5000. It needs a little extra code to boot the second core (CPU2/CPU3), but for now we can treat it the same as a single core BMIPS5000. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Add special cache handling in c-r4k.cKevin Cernekee1-0/+43
BMIPS435x and BMIPS438x have a single shared L1 D$ and load/store unit, so it isn't necessary to raise IPIs to keep both CPUs coherent. BMIPS5000 has VIPT L1 caches that handle aliases in hardware, and its I$ fills from D$. But a special sequence with 2 SYNCs and 32 NOPs is needed to ensure coherency. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Let each platform customize the CPU1 IRQ maskKevin Cernekee2-2/+5
On some chips like bcm3384, "other stuff" gets wired up to CPU1's IE_IRQ1 input, generating spurious IRQs. In this case we want the platform code to be able to mask it off. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Select the appropriate L1_CACHE_SHIFT for 438x and 5000 CPUsKevin Cernekee1-0/+2
BMIPS438x has a 64-byte D$ line size and BMIPS5000 has a 128-byte L2 line size. If L1_CACHE_SHIFT is undersized, DMA buffers will not be cacheline-aligned and terrible things will happen. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Allow MIPS_CPU_SCACHE to be used with different line sizesKevin Cernekee1-1/+1
CONFIG_MIPS_CPU_SCACHE determines whether to build sc-mips.c. However, it is currently hardwired to use an L1_SHIFT of 6 (64 bytes). Move the L1_SHIFT selection into the CPU or SoC section so that other SoCs can select different values. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8162/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Explicitly configure reset vectors prior to secondary bootKevin Cernekee1-21/+8
The secondary CPU's reset vector needs to be set to KSEG1 for a cold boot (release from reset), or KSEG0 for a warm restart. On a cold boot KSEG0 may be unavailable (BMIPS4380), and on a warm restart KSEG1 may be unavailable (XKS01 mode on 4380 or 5000). Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPUJon Fraser1-0/+1
CPU interrupts need to be disabled on a cpu being taken down. When a cpu is hot-plugged out of the system the following sequence occurs. On the CPU where the hotplug sequence was initiated: cpu_down _cpu_down { __cpu_notify(CPU_DOWN_PREPARE __stop_machine(take_cpu_down wait for cpu to run disable code. __cpu_die } On the CPU being disabled: take_cpu_down __cpu_disable { mp_ops->cpu_disable bmips_cpu_disable clear_c0_status(IE_IRQ5) (added) cpu_notify(CPU_DYING... } Before the cpu_notifier is called with CPU_DYING, all interrupts on the dying cpu must be disabled. This guarantees that before tick_notify is called with the CPU_DYING event and sets the clock device pointer to NULL, there can not be any more clock interrupts. When this wasn't done, an unfortunately-timed timer interrupt sometimes caused hangs immediately prior to system suspend: Debug PM is not enabled. To enable partial suspend, rebuild kernel with CONFIG_PM_DEBUG Pass 1 out of 1,PM: Syncing filesystems ... mode=none, tp1=done. 1, flags=5, cycle_tp=, sleep= Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: suspend of devices complete after 54.199 msecs PM: late suspend of devices complete after 0.172 msecs Disabling non-boot CPUs ... SMP: CPU1 is offline INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 0, t=62537 jiffies) Call Trace: [<804baa78>] dump_stack+0x8/0x34 [<8008a2d8>] __rcu_pending+0x4b8/0x55c [<8008adf4>] rcu_check_callbacks+0x78/0x180 [<80037830>] update_process_times+0x40/0x6c [<80072fe4>] tick_sched_timer+0x74/0xe4 [<80050180>] __run_hrtimer.clone.30+0x64/0x140 [<80051150>] hrtimer_interrupt+0x19c/0x4bc [<8000cdb8>] c0_compare_interrupt+0x50/0x88 [<80081b18>] handle_irq_event_percpu+0x5c/0x2f4 [<80086490>] handle_percpu_irq+0x8c/0xc0 [<800811b4>] generic_handle_irq+0x34/0x54 [<800067dc>] do_IRQ+0x18/0x2c [<8000375c>] plat_irq_dispatch+0xd0/0x128 [<80004a04>] ret_from_irq+0x0/0x4 [<80004c40>] r4k_wait+0x20/0x40 [<80006b6c>] cpu_idle+0x98/0xf0 [<805d3988>] start_kernel+0x424/0x440 Signed-off-by: Jon Fraser <jfraser@broadcom.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Allow BMIPS3300 to utilize SMP ebase relocation codeJon Fraser1-0/+1
BMIPS3300 processors do not have the hardware to support SMP, but with a small tweak, the SMP ebase relocation code allows BMIPS3300-based platforms to reuse the S2/S3 power management code from BMIPS4380-based chips. Normally this is as simple as adding one line to prom_init(): board_ebase_setup = &bmips_ebase_setup; Signed-off-by: Jon Fraser <jfraser@broadcom.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Introduce helper function to change the reset vectorKevin Cernekee1-7/+58
This will need to be called from a few different places, and the logic is starting to get a bit hairy (with the need for IPIs, CPU bug workarounds, and hazards). Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8158/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Align secondary boot sequence with latest firmware releasesKevin Cernekee1-11/+1
On some older BMIPS5200 (dual core / quad thread) platforms, the PROM code set up CPU2/CPU3 so they would be started through an NMI instead of through the ACTION register. But this was incompatible with some power management features that were later added, so the scheme was changed so that Linux is fully responsible for booting CPU2/CPU3. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8157/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Add a clockevent/clocksource using PWM TimerKelvin Cheung4-31/+266
This patch add a clockevent/clocksource using PWM Timer for Loongson1B, which is based on earlier work by Tang, Haifeng. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Some fixes/updates for LS1BKelvin Cheung9-31/+283
- Fix hanging ethernet issue of LS1B v2.0 by adding pbl field in plat data. (It seems that the MAC controller of LS1B v2.0 can only accept pbl=1) - Add GMAC1 support and setup MUX in terms of PHY mode. - Add CPUFreq support. - Add MUX Register Definitions. - Add PWM Register Definitions. - Update clock register bitfields according to the latest spec. - Update clock related stuff. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8024/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Improve early printkKelvin Cheung2-17/+14
- Determine serial port for early printk according to kernel command line. - Move to 8250/16550 serial early printk driver. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Fix reboot problem on LS1BKelvin Cheung2-13/+18
- Correct the header file of watchdog registers - Use ioremap_nocache() to access watchdog registers instead Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: DMA: Explain the lack of special handling for R14000/R16000.Ralf Baechle1-0/+5
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Clean up nvram headerRafał Miłecki3-39/+33
1) Move private defines to the .c file 2) Move SPROM helper to the sprom.c 3) Drop unused code 4) Rename magic to the NVRAM_MAGIC 5) Add const to the char pointer we never modify Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Use mtd as an alternative way/API to get NVRAM contentRafał Miłecki1-4/+38
NVRAM can be read using magic memory offset, but after all it's just a flash partition. On platforms where NVRAM isn't needed early we can get it using mtd subsystem. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8266/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Kconfig option to better exercise/debug hybrid FPRsPaul Burton2-0/+31
The hybrid FPR scheme exists to allow for compatibility between existing FP32 code and newly compiled FP64A code. Such code should hopefully be rare in the real world, and for the moment is difficult to come across. All code except that built for the FP64 ABI can correctly execute using the hybrid FPR scheme, so debugging the hybrid FPR implementation can be eased by forcing all such code to use it. This is undesirable in general due to the trap & emulate overhead of the hybrid FPR implementation, but is a very useful option to have for debugging. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7680/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ELF: Set FP mode according to .MIPS.abiflagsPaul Burton4-20/+211
This patch reads the .MIPS.abiflags section when it is present, and sets the FP mode of the task accordingly. Any loaded ELF files which do not contain a .MIPS.abiflags section will continue to observe the previous behaviour, that is FR=1 if EF_MIPS_FP64 is set else FR=0. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7681/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ELF: Add definition for the .MIPS.abiflags sectionPaul Burton1-0/+25
New toolchains will generate a .MIPS.abiflags section, referenced by a new PT_MIPS_ABIFLAGS program header. This section will provide information about the requirements of the ELF, including the ISA level the code is built for, the ASEs it requires, the size of various registers and its expectations of the floating point mode. This patch introduces a definition of the structure of this section and the program header, for use in a subsequent patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7682/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Support for hybrid FPRsPaul Burton5-10/+100
Hybrid FPRs is a scheme where scalar FP registers are 64b wide, but accesses to odd indexed single registers use bits 63:32 of the preceeding even indexed 64b register. In this mode all FP code except that built for the plain FP64 ABI can execute correctly. Most notably a combination of FP64A & FP32 code can execute correctly, allowing for existing FP32 binaries to be linked with new FP64A binaries that can make use of 64 bit FP & MSA. Hybrid FPRs are implemented by setting both the FR & FRE bits, trapping & emulating single precision FP instructions (via Reserved Instruction exceptions) whilst allowing others to execute natively. It therefore has a penalty in terms of execution speed, and should only be used when no fully native mode can be. As more binaries are recompiled to use either the FPXX or FP64(A) ABIs, the need for hybrid FPRs should diminish. However in the short to mid term it allows for a gradual transition towards that world, rather than a complete ABI break which is not feasible for some users & not desirable for many. A task will be executed using the hybrid FPR scheme when its TIF_HYBRID_FPREGS flag is set & TIF_32BIT_FPREGS is clear. A further patch will set the flags as necessary, this patch simply adds the infrastructure necessary for the hybrid FPR mode to work. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7683/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Ensure Config5.UFE is clear on bootPaul Burton1-1/+1
As is done for UFR, ensure that userland cannot directly manipulate the mode by clearing the UFE bit during boot. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7677/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: detect presence of the FRE & UFR bitsPaul Burton3-0/+7
Detect the presence of the Config5 FRE & UFE bits, as indicated by the FREP bit in FPIR. Record this as a CPU option bit, and provide a cpu_has_fre macro to ease checking of that option bit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: define bits introduced for hybrid FPRsPaul Burton1-0/+3
Add definitions for the FRE & UFE bits in Config5, and the FREP bit in FPIR. These bits are used to support a hybrid FPR scheme allowing a mixture of FP32 & FP64 code to execute within a task. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add RS780/SBX00 HPET supportHuacai Chen6-1/+350
CPUFreq driver need external timer, so add hpet at first. In Loongson 3, only Core-0 can receive external interrupt. As a result, timekeeping cannot absolutely use HPET timer. We use a hybrid solution: Core-0 use HPET as its clock event device, but other cores still use MIPS; clock source is global and doesn't need interrupt, so use HPET. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add oprofile supportHuacai Chen3-0/+225
Loongson-3 has two groups of performance counters, they are 4 sub- registers of CP0's REG25. This patch add oprofile support. REG25, sel 0: Perf Control of group 0; REG25, sel 1: Perf Counter of group 0; REG25, sel 2: Perf Control of group 1; REG25, sel 3: Perf Counter of group 1. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Improve LEFI firmware interfaceHuacai Chen14-42/+234
Machtypes of Loongson-3 machines become more and more, but there are only small differences among different machtypes. Keeping a large table of machtypes is very ugly and hard to extend. We found that the major machtype differences are UARTs information (number of UARTs, UART IRQs, UART clocks, etc.), platform devices (EC, temperature sensors, fan controllers, etc.) and some workarounds (because of some CPU bugs or mainboard bugs). In this patch we improve the UEFI-like (LEFI) interface to make all Loongson-3 machines use a same machtype "generic-loongson-machine". Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Allow booting from any coreHuacai Chen7-36/+67
By offering Logical->Physical core id mapping, so as to reserve some physical cores via mask. This allow booting from any core when core-0 has problems. Since the maximun cores supported by Loongson-3 is 16, 32-bit cpu_startup_core_id can be split to 16-bit cpu_startup_core_id and 16-bit reserved_cores_mask for compatibility. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add PHYS48_TO_HT40 supportHuacai Chen3-3/+22
The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical address. This implies only node-0's memory is DMAable because high bits (Node ID) will lost. Fortunately, by configuring address windows in firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used now) from Loongson-3's 48-bit address space and embed it into 40-bit (bit 37~38). Every NUMA node can do DMA now (however, maximum memory of each node is reduced to 2^37 = 128GB). Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 06:47:01 +0000