summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller56-361/+668
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-1/+58
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, thp: do not cause memcg oom for thp mm/vmscan: wake up flushers for legacy cgroups too Revert "mm: page_alloc: skip over regions of invalid pfns where possible" mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink() mm/thp: do not wait for lock_page() in deferred_split_scan() mm/khugepaged.c: convert VM_BUG_ON() to collapse fail x86/mm: implement free pmd/pte page interfaces mm/vmalloc: add interfaces to free unmapped page table h8300: remove extraneous __BIG_ENDIAN definition hugetlbfs: check for pgoff value overflow lockdep: fix fs_reclaim warning MAINTAINERS: update Mark Fasheh's e-mail mm/mempolicy.c: avoid use uninitialized preferred_node
2018-03-22Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-32/+28
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "Two regression fixes, two bug fixes for older issues, two fixes for new functionality added this cycle that have userspace ABI concerns, and a small cleanup. These have appeared in a linux-next release and have a build success report from the 0day robot. * The 4.16 rework of altmap handling led to some configurations leaking page table allocations due to freeing from the altmap reservation rather than the page allocator. The impact without the fix is leaked memory and a WARN() message when tearing down libnvdimm namespaces. The rework also missed a place where error handling code needed to be removed that can lead to a crash if devm_memremap_pages() fails. * acpi_map_pxm_to_node() had a latent bug whereby it could misidentify the closest online node to a given proximity domain. * Block integrity handling was reworked several kernels back to allow calling add_disk() after setting up the integrity profile. The nd_btt and nd_blk drivers are just now catching up to fix automatic partition detection at driver load time. * The new peristence_domain attribute, a platform indicator of whether cpu caches are powerfail protected for example, is meant to be a single value enum and not a set of flags. This oversight was caught while reviewing new userspace code in libndctl to communicate the attribute. Fix this new enabling up so that we are not stuck with an unwanted userspace ABI" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, nfit: fix persistence domain reporting libnvdimm, region: hide persistence_domain when unknown acpi, numa: fix pxm to online numa node associations x86, memremap: fix altmap accounting at free libnvdimm: remove redundant assignment to pointer 'dev' libnvdimm, {btt, blk}: do integrity setup before add_disk() kernel/memremap: Remove stale devres_free() call
2018-03-22x86/mm: implement free pmd/pte page interfacesToshi Kani1-2/+26
Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which clear a given pud/pmd entry and free up lower level page table(s). The address range associated with the pud/pmd entry must have been purged by INVLPG. Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reported-by: Lei Li <lious.lilei@hisilicon.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22mm/vmalloc: add interfaces to free unmapped page tableToshi Kani2-0/+34
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22h8300: remove extraneous __BIG_ENDIAN definitionArnd Bergmann1-1/+0
A bugfix I did earlier caused a build regression on h8300, which defines the __BIG_ENDIAN macro in a slightly different way than the generic code: arch/h8300/include/asm/byteorder.h:5:0: warning: "__BIG_ENDIAN" redefined We don't need to define it here, as the same macro is already provided by the linux/byteorder/big_endian.h, and that version does not conflict. While this is a v4.16 regression, my earlier patch also got backported to the 4.14 and 4.15 stable kernels, so we need the fixup there as well. Link: http://lkml.kernel.org/r/20180313120752.2645129-1-arnd@arndb.de Fixes: 101110f6271c ("Kbuild: always define endianess in kconfig.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+2
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...
2018-03-20kvm/x86: fix icebp instruction handlingLinus Torvalds2-1/+9
The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such. But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware. The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp. That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information. But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field. So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'". Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated. Reported-by: Andy Lutomirski <luto@kernel.org> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-18Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds8-50/+78
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Another set of melted spectrum updates: - Iron out the last late microcode loading issues by actually checking whether new microcode is present and preventing the CPU synchronization to run into a timeout induced hang. - Remove Skylake C2 from the microcode blacklist according to the latest Intel documentation - Fix the VM86 POPF emulation which traps if VIP is set, but VIF is not. Enhance the selftests to catch that kind of issue - Annotate indirect calls/jumps for objtool on 32bit. This is not a functional issue, but for consistency sake its the right thing to do. - Fix a jump label build warning observed on SPARC64 which uses 32bit storage for the code location which is casted to 64 bit pointer w/o extending it to 64bit first. - Add two new cpufeature bits. Not really an urgent issue, but provides them for both x86 and x86/kvm work. No impact on the current kernel" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Fix CPU synchronization routine x86/microcode: Attempt late loading only when new microcode is present x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist jump_label: Fix sparc64 warning x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels x86/vm86/32: Fix POPF emulation selftests/x86/entry_from_vm86: Add test cases for POPF selftests/x86/entry_from_vm86: Exit with 1 if we fail x86/cpufeatures: Add Intel PCONFIG cpufeature x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
2018-03-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for vmalloc_fault() which uses p*d_huge() unconditionally whether CONFIG_HUGETLBFS is set or not. In case of CONFIG_HUGETLBFS=n this results in a crash as p*d_huge() returns 0 in that case" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix vmalloc_fault to use pXd_large
2018-03-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-9/+8
Pull KVM fixes from Paolo Bonzini: "PPC: - fix bug leading to lost IPIs and smp_call_function_many() lockups on POWER9 ARM: - locking fix - reset fix - GICv2 multi-source SGI injection fix - GICv2-on-v3 MMIO synchronization fix - make the console less verbose. x86: - fix device passthrough on AMD SME" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix device passthrough when SME is active kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3 KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid KVM: arm/arm64: Reduce verbosity of KVM init log KVM: arm/arm64: Reset mapped IRQs on VM reset KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry
2018-03-17parisc: Handle case where flush_cache_range is called with no contextJohn David Anglin1-9/+32
Just when I had decided that flush_cache_range() was always called with a valid context, Helge reported two cases where the "BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd: kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587! CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1 Workqueue: events free_ioctx   IAOQ[0]: flush_cache_range+0x164/0x168   IAOQ[1]: flush_cache_page+0x0/0x1c8   RP(r2): unmap_page_range+0xae8/0xb88 Backtrace:   [<00000000404a6980>] unmap_page_range+0xae8/0xb88   [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188   [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8   [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208   [<0000000040461518>] truncate_pagecache+0x98/0x108   [<0000000040461624>] truncate_setsize+0x9c/0xb8   [<00000000405d7f30>] put_aio_ring_file+0x80/0x100   [<00000000405d803c>] aio_free_ring+0x8c/0x290   [<00000000405d82c0>] free_ioctx+0x80/0x180   [<0000000040284e6c>] process_one_work+0x21c/0x668   [<00000000402854c4>] worker_thread+0x20c/0x778   [<0000000040291d44>] kthread+0x2d4/0x2e0   [<0000000040204020>] end_fault_vector+0x20/0xc0 This indicates that we need to handle the no context case in flush_cache_range() as we do in flush_cache_mm(). In thinking about this, I realized that we don't need to flush the TLB when there is no context. So, I added context checks to the large flush cases in flush_cache_mm() and flush_cache_range(). The large flush case occurs frequently in flush_cache_mm() and the change should improve fork performance. The v2 version of this change removes the BUG_ON from flush_cache_page() by skipping the TLB flush when there is no context.  I also added code to flush the TLB in flush_cache_mm() and flush_cache_range() when we have a context that's not current.  Now all three routines handle TLB flushes in a similar manner. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-16Merge tag 'microblaze-4.16-rc6' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds5-64/+8
Pull microblaze fixes from Michal Simek: - Use NO_BOOTMEM to fix boot issue - Fix opt lib endian dependencies * tag 'microblaze-4.16-rc6' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: switch to NO_BOOTMEM microblaze: remove unused alloc_maybe_bootmem microblaze: Setup dependencies for ASM optimized lib functions
2018-03-16x86/microcode: Fix CPU synchronization routineBorislav Petkov1-27/+41
Emanuel reported an issue with a hang during microcode update because my dumb idea to use one atomic synchronization variable for both rendezvous - before and after update - was simply bollocks: microcode: microcode_reload_late: late_cpus: 4 microcode: __reload_late: cpu 2 entered microcode: __reload_late: cpu 1 entered microcode: __reload_late: cpu 3 entered microcode: __reload_late: cpu 0 entered microcode: __reload_late: cpu 1 left microcode: Timeout while waiting for CPUs rendezvous, remaining: 1 CPU1 above would finish, leave and the others will still spin waiting for it to join. So do two synchronization atomics instead, which makes the code a lot more straightforward. Also, since the update is serialized and it also takes quite some time per microcode engine, increase the exit timeout by the number of CPUs on the system. That's ok because the moment all CPUs are done, that timeout will be cut short. Furthermore, panic when some of the CPUs timeout when returning from a microcode update: we can't allow a system with not all cores updated. Also, as an optimization, do not do the exit sync if microcode wasn't updated. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de
2018-03-16x86/microcode: Attempt late loading only when new microcode is presentBorislav Petkov4-19/+28
Return UCODE_NEW from the scanning functions to denote that new microcode was found and only then attempt the expensive synchronization dance. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de
2018-03-16KVM: x86: Fix device passthrough when SME is activeTom Lendacky1-1/+3
When using device passthrough with SME active, the MMIO range that is mapped for the device should not be mapped encrypted. Add a check in set_spte() to insure that a page is not mapped encrypted if that page is a device MMIO page as indicated by kvm_is_mmio_pfn(). Cc: <stable@vger.kernel.org> # 4.14.x- Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-16microblaze: switch to NO_BOOTMEMRob Herring2-50/+7
Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc() doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM. Similar change was already done by others architectures "ARM: mm: Remove bootmem code and switch to NO_BOOTMEM" (sha1: 84f452b1e8fc73ac0e31254c66e3e2260ce5263d) or "openrisc: Consolidate setup to use memblock instead of bootmem" (sha1: 266c7fad157265bb54d17db1c9545f2aaa488643) or "parisc: Drop bootmem and switch to memblock" (sha1: 4fe9e1d957e45ad8eba9885ee860a0e93d13a7c7) or "powerpc: Remove bootmem allocator" (sha1: 10239733ee8617bac3f1c1769af43a88ed979324) or "s390/mm: Convert bootmem to memblock" (sha1: 50be634507284eea38df78154d22615d21200b42) or "sparc64: Convert over to NO_BOOTMEM." (sha1: 625d693e9784f988371e69c2b41a2172c0be6c11) or "xtensa: drop sysmem and switch to memblock" (sha1: 0e46c1115f5816949220d62dd3ff04aa68e7ac6b) Issue was introduced by: "of/fdt: use memblock_virt_alloc for early alloc" (sha1: 0fa1c579349fdd90173381712ad78aa99c09d38b) Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16microblaze: remove unused alloc_maybe_bootmemRob Herring2-9/+0
alloc_maybe_bootmem is unused, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16microblaze: Setup dependencies for ASM optimized lib functionsMichal Simek2-5/+1
The patch: "microblaze: Setup proper dependency for optimized lib functions" (sha1: 7b6ce52be3f86520524711a6f33f3866f9339694) didn't setup all dependencies properly. Optimized lib functions in C are also present for little endian and optimized library functions in assembler are implemented only for big endian version. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklistAlexander Sergeyev1-2/+1
In accordance with Intel's microcode revision guidance from March 6 MCU rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors that share CPUID 506E3. Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jia Zhang <qianyue.zj@alibaba-inc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kyle Huey <me@kylehuey.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomain
2018-03-15sparc64: Fix regression in pmdp_invalidate().David S. Miller1-6/+13
pmdp_invalidate() was changed to update the pmd atomically (to not lose dirty/access bits) and return the original pmd value. However, in doing so, we lost a lot of the essential work that set_pmd_at() does, namely to update hugepage mapping counts and queuing up the batched TLB flush entry. Thus we were not flushing entries out of the TLB when making such PMD changes. Fix this by abstracting the accounting work of set_pmd_at() out into a separate function, and call it from pmdp_establish(). Fixes: a8e654f01cb7 ("sparc64: update pmdp_invalidate() to return old pmd value") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-15Merge tag 'kvm-ppc-fixes-4.16-2' of ↵Paolo Bonzini1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master Fix for PPC KVM for 4.16 - Fix bug leading to lost IPIs on POWER9 and hence to other CPUs reporting lockups in smp_call_function_many().
2018-03-15Merge tag 'kvm-arm-fixes-for-v4.16-2' of ↵Paolo Bonzini1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master kvm/arm fixes for 4.16, take 2 - Peace of mind locking fix in vgic_mmio_read_pending - Allow hw-mapped interrupts to be reset when the VM resets - Fix GICv2 multi-source SGI injection - Fix MMIO synchronization for GICv2 on v3 emulation - Remove excess verbosity on the console
2018-03-14x86, memremap: fix altmap accounting at freeDan Williams1-32/+28
Commit 24b6d4164348 "mm: pass the vmem_altmap to vmemmap_free" converted the vmemmap_free() path to pass the altmap argument all the way through the call chain rather than looking it up based on the page. Unfortunately that ends up over freeing altmap allocated pages in some cases since free_pagetable() is used to free both memmap space and pte space, where only the memmap stored in huge pages uses altmap allocations. Given that altmap allocations for memmap space are special cased in vmemmap_populate_hugepages() add a symmetric / special case free_hugepage_table() to handle altmap freeing, and cleanup the unneeded passing of altmap to leaf functions that do not require it. Without this change the sanity check accounting in devm_memremap_pages_release() will throw a warning with the following signature. nd_pmem pfn10.1: devm_memremap_pages_release: failed to free all reserved pages WARNING: CPU: 44 PID: 3539 at kernel/memremap.c:310 devm_memremap_pages_release+0x1c7/0x220 CPU: 44 PID: 3539 Comm: ndctl Tainted: G L 4.16.0-rc1-linux-stable #7 RIP: 0010:devm_memremap_pages_release+0x1c7/0x220 [..] Call Trace: release_nodes+0x225/0x270 device_release_driver_internal+0x15d/0x210 bus_remove_device+0xe2/0x160 device_del+0x130/0x310 ? klist_release+0x56/0x100 ? nd_region_notify+0xc0/0xc0 [libnvdimm] device_unregister+0x16/0x60 This was missed in testing since not all configurations will trigger this warning. Fixes: 24b6d4164348 ("mm: pass the vmem_altmap to vmemmap_free") Reported-by: Jane Chu <jane.chu@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-14x86/mm: Fix vmalloc_fault to use pXd_largeToshi Kani1-3/+3
Gratian Crisan reported that vmalloc_fault() crashes when CONFIG_HUGETLBFS is not set since the function inadvertently uses pXn_huge(), which always return 0 in this case. ioremap() does not depend on CONFIG_HUGETLBFS. Fix vmalloc_fault() to call pXd_large() instead. Fixes: f4eafd8bcd52 ("x86/mm: Fix vmalloc_fault() to handle large pages properly") Reported-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20180313170347.3829-2-toshi.kani@hpe.com
2018-03-14KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUNChristoffer Dall1-3/+0
Calling vcpu_load() registers preempt notifiers for this vcpu and calls kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy lifting on arm/arm64 and will try to do things such as enabling the virtual timer and setting us up to handle interrupts from the timer hardware. Loading state onto hardware registers and enabling hardware to signal interrupts can be problematic when we're not actually about to run the VCPU, because it makes it difficult to establish the right context when handling interrupts from the timer, and it makes the register access code difficult to reason about. Luckily, now when we call vcpu_load in each ioctl implementation, we can simply remove the call from the non-KVM_RUN vcpu ioctls, and our kvm_arch_vcpu_load() is only used for loading vcpu content to the physical CPU when we're actually going to run the vcpu. Cc: stable@vger.kernel.org Fixes: 9b062471e52a ("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl") Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14x86/speculation, objtool: Annotate indirect calls/jumps for objtool on ↵Andy Whitcroft1-1/+4
32-bit kernels In the following commit: 9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool") ... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels, but we did not annotate the 32-bit path. Annotate it similarly. Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-14x86/vm86/32: Fix POPF emulationAndy Lutomirski1-1/+2
POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by: Stas Sergeev <stsp@list.ru> Reported-by: Bart Oldeman <bartoldeman@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86") Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-14KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entryPaul Mackerras1-5/+5
This fixes a bug where the trap number that is returned by __kvmppc_vcore_entry gets corrupted. The effect of the corruption is that IPIs get ignored on POWER9 systems when the IPI is sent via a doorbell interrupt to a CPU which is executing in a KVM guest. The effect of the IPI being ignored is often that another CPU locks up inside smp_call_function_many() (and if that CPU is holding a spinlock, other CPUs then lock up inside raw_spin_lock()). The trap number is currently held in register r12 for most of the assembly-language part of the guest exit path. In that path, we call kvmppc_subcore_exit_guest(), which is a C function, without restoring r12 afterwards. Depending on the kernel config and the compiler, it may modify r12 or it may not, so some config/compiler combinations see the bug and others don't. To fix this, we arrange for the trap number to be stored on the stack from the 'guest_bypass:' label until the end of the function, then the trap number is loaded and returned in r12 as before. Cc: stable@vger.kernel.org # v4.8+ Fixes: fd7bacbca47a ("KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt") Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-03-12x86/cpufeatures: Add Intel PCONFIG cpufeatureKirill A. Shutemov1-0/+1
CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kai Huang <kai.huang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12x86/cpufeatures: Add Intel Total Memory Encryption cpufeatureKirill A. Shutemov1-0/+1
CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory Encryption. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kai Huang <kai.huang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-11Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds15-157/+278
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Yet another pile of melted spectrum related updates: - Drop native vsyscall support finally as it causes more trouble than benefit. - Make microcode loading more robust. There were a few issues especially related to late loading which are now surfacing because late loading of the IB* microcodes addressing spectre issues has become more widely used. - Simplify and robustify the syscall handling in the entry code - Prevent kprobes on the entry trampoline code which lead to kernel crashes when the probe hits before CR3 is updated - Don't check microcode versions when running on hypervisors as they are considered as lying anyway. - Fix the 32bit objtool build and a coment typo" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix kernel crash when probing .entry_trampoline code x86/pti: Fix a comment typo x86/microcode: Synchronize late microcode loading x86/microcode: Request microcode on the BSP x86/microcode/intel: Look into the patch cache first x86/microcode: Do not upload microcode if CPUs are offline x86/microcode/intel: Writeback and invalidate caches before updating microcode x86/microcode/intel: Check microcode revision before updating sibling threads x86/microcode: Get rid of struct apply_microcode_ctx x86/spectre_v2: Don't check microcode versions when running under hypervisors x86/vsyscall/64: Drop "native" vsyscalls x86/entry/64/compat: Save one instruction in entry_INT80_compat() x86/entry: Do not special-case clone(2) in compat entry x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls x86/syscalls: Use proper syscall definition for sys_ioperm() x86/entry: Remove stale syscall prototype x86/syscalls/32: Simplify $entry == $compat entries objtool: Fix 32-bit build
2018-03-11Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds2-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two small fixes for RAS/MCE: - Serialize sysfs changes to avoid concurrent modificaiton of underlying data - Add microcode revision to Machine Check records. This should have been there forever, but now with the broken microcode versions in the wild it has become important" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE: Serialize sysfs changes x86/MCE: Save microcode revision in machine check records
2018-03-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Another set of perf updates: - Fix a Skylake Uncore event format declaration - Prevent perf pipe mode from crahsing which was caused by a missing buffer allocation - Make the perf top popup message which tells the user that it uses fallback mode on older kernels a debug message. - Make perf context rescheduling work correcctly - Robustify the jump error drawing in perf browser mode so it does not try to create references to NULL initialized offset entries - Make trigger_on() robust so it does not enable the trigger before everything is set up correctly to handle it - Make perf auxtrace respect the --no-itrace option so it does not try to queue AUX data for decoding. - Prevent having different number of field separators in CVS output lines when a counter is not supported. - Make the perf kallsyms man page usage behave like it does for all other perf commands. - Synchronize the kernel headers" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix ctx_event_type in ctx_resched() perf tools: Fix trigger class trigger_on() perf auxtrace: Prevent decoding when --no-itrace perf stat: Fix CVS output format for non-supported counters tools headers: Sync x86's cpufeatures.h tools headers: Sync copy of kvm UAPI headers perf record: Fix crash in pipe mode perf annotate browser: Be more robust when drawing jump arrows perf top: Fix annoying fallback message on older kernels perf kallsyms: Fix the usage on the man page perf/x86/intel/uncore: Fix Skylake UPI event format
2018-03-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-35/+57
Pull KVM fixes from Radim Krčmář: "PPC: - Fix guest time accounting in the host - Fix large-page backing for radix guests on POWER9 - Fix HPT guests on POWER9 backed by 2M or 1G pages - Compile fixes for some configs and gcc versions s390: - Fix random memory corruption when running as guest2 (e.g. KVM in LPAR) and starting guest3 (e.g. nested KVM) with many CPUs - Export forgotten io interrupt delivery statistics counter" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix memory overwrites when not using SCA entries KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler KVM: s390: provide io interrupt kvm_stat KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n
2018-03-09Merge tag 'arm64-fixes' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - The SMCCC firmware interface for the spectre variant 2 mitigation has been updated to allow the discovery of whether the CPU needs the workaround. This pull request relaxes the kernel check on the return value from firmware. - Fix the commit allowing changing from global to non-global page table entries which inadvertently disallowed other safe attribute changes. - Fix sleeping in atomic during the arm_perf_teardown_cpu() code. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hook arm64: mm: fix thinko in non-global page table attribute check
2018-03-09arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discoveryMarc Zyngier1-2/+2
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification allows firmware to return a non zero, positive value to describe that although the mitigation is implemented at the higher exception level, the CPU on which the call is made is not affected. Let's relax the check on the return value from ARCH_WORKAROUND_1 so that we only error out if the returned value is negative. Fixes: b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-03-09Merge tag 'powerpc-4.16-5' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled
2018-03-09x86/kprobes: Fix kernel crash when probing .entry_trampoline codeFrancis Deslauriers3-1/+12
Disable the kprobe probing of the entry trampoline: .entry_trampoline is a code area that is used to ensure page table isolation between userspace and kernelspace. At the beginning of the execution of the trampoline, we load the kernel's CR3 register. This has the effect of enabling the translation of the kernel virtual addresses to physical addresses. Before this happens most kernel addresses can not be translated because the running process' CR3 is still used. If a kprobe is placed on the trampoline code before that change of the CR3 register happens the kernel crashes because int3 handling pages are not accessible. To fix this, add the .entry_trampoline section to the kprobe blacklist to prohibit the probing of code before all the kernel pages are accessible. Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: mathieu.desnoyers@efficios.com Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08Merge tag 'mips_fixes_4.16_4' of ↵Linus Torvalds4-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A miscellaneous pile of MIPS fixes for 4.16: - move put_compat_sigset() to evade hardened usercopy warnings (4.16) - select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16) - fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0) - fix disabling of IPIs during BMIPS suspend (3.19)" * tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: BMIPS: Do not mask IPIs during suspend MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT signals: Move put_compat_sigset to compat.h to silence hardened usercopy MIPS: OCTEON: irq: Check for null return on kzalloc allocation MIPS: ath25: Check for kzalloc allocation failure
2018-03-08x86/MCE: Serialize sysfs changesSeunghun Han1-1/+21
The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
2018-03-08x86/MCE: Save microcode revision in machine check recordsTony Luck2-1/+4
Updating microcode used to be relatively rare. Now that it has become more common we should save the microcode version in a machine check record to make sure that those people looking at the error have this important information bundled with the rest of the logged information. [ Borislav: Simplify a bit. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com
2018-03-08x86/pti: Fix a comment typoSeunghun Han1-1/+1
s/visinble/visible/ Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1520397135-132809-1-git-send-email-kkamagui@gmail.com
2018-03-08x86/microcode: Synchronize late microcode loadingAshok Raj1-26/+92
Original idea by Ashok, completely rewritten by Borislav. Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases. Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update. [ Borislav: Rewrite completely. ] Co-developed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
2018-03-08x86/microcode: Request microcode on the BSPBorislav Petkov1-6/+5
... so that any newer version can land in the cache and can later be fished out by the application functions. Do that before grabbing the hotplug lock. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de
2018-03-08x86/microcode/intel: Look into the patch cache firstBorislav Petkov1-6/+5
The cache might contain a newer patch - look in there first. A follow-on change will make sure newest patches are loaded into the cache of microcode patches. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-6-bp@alien8.de
2018-03-08x86/microcode: Do not upload microcode if CPUs are offlineAshok Raj1-0/+18
Avoid loading microcode if any of the CPUs are offline, and issue a warning. Having different microcode revisions on the system at any time is outright dangerous. [ Borislav: Massage changelog. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de
2018-03-08x86/microcode/intel: Writeback and invalidate caches before updating microcodeAshok Raj1-0/+12
Updating microcode is less error prone when caches have been flushed and depending on what exactly the microcode is updating. For example, some of the issues around certain Broadwell parts can be addressed by doing a full cache flush. [ Borislav: Massage it and use native_wbinvd() in both cases. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-3-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-4-bp@alien8.de
2018-03-08x86/microcode/intel: Check microcode revision before updating sibling threadsAshok Raj1-3/+24
After updating microcode on one of the threads of a core, the other thread sibling automatically gets the update since the microcode resources on a hyperthreaded core are shared between the two threads. Check the microcode revision on the CPU before performing a microcode update and thus save us the WRMSR 0x79 because it is a particularly expensive operation. [ Borislav: Massage changelog and coding style. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-2-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-3-bp@alien8.de
2018-03-08x86/microcode: Get rid of struct apply_microcode_ctxBorislav Petkov1-11/+8
It is a useless remnant from earlier times. Use the ucode_state enum directly. No functional change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de