summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2012-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds34-84/+280
Pull sparc fixes from David Miller: "Several build/bug fixes for sparc, including: 1) Configuring a mix of static vs. modular sparc64 crypto modules didn't work, remove an ill-conceived attempt to only have to build the device match table for these drivers once to fix the problem. Reported by Meelis Roos. 2) Make the montgomery multiple/square and mpmul instructions actually usable in 32-bit tasks. Essentially this involves providing 32-bit userspace with a way to use a 64-bit stack when it needs to. 3) Our sparc64 atomic backoffs don't yield cpu strands properly on Niagara chips. Use pause instruction when available to achieve this, otherwise use a benign instruction we know blocks the strand for some time. 4) Wire up kcmp 5) Fix the build of various drivers by removing the unnecessary blocking of OF_GPIO when SPARC. 6) Fix unintended regression wherein of_address_to_resource stopped being provided. Fix from Andreas Larsson. 7) Fix NULL dereference in leon_handle_ext_irq(), also from Andreas Larsson." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix build with mix of modular vs. non-modular crypto drivers. sparc: Support atomic64_dec_if_positive properly. of/address: sparc: Declare of_address_to_resource() as an extern function for sparc again sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irq sparc: Add sparc support for platform_get_irq() sparc: Allow OF_GPIO on sparc. qlogicpti: Fix build warning. sparc: Wire up sys_kcmp. sparc64: Improvde documentation and readability of atomic backoff code. sparc64: Use pause instruction when available. sparc64: Fix cpu strand yielding. sparc64: Make montmul/montsqr/mpmul usable in 32-bit threads.
2012-11-10Merge tag 'arm64-fixes' of ↵Linus Torvalds10-41/+14
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - correct argument type (pgprot_t) when calling __ioremap() - PCI_IOBASE virtual address change - use architected event for CPU cycle counter - fix ELF core dumping - select CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION - missing completion for secondary CPU boot - booting on systems with all memory beyond 4GB * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: mm: fix booting on systems with no memory below 4GB arm64: smp: add missing completion for secondary boot arm64: compat: select CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION arm64: elf: fix core dumping definitions for GP and FP registers arm64: perf: use architected event for CPU cycle counter arm64: Move PCI_IOBASE closer to MODULES_VADDR arm64: Use pgprot_t as the last argument when invoking __ioremap()
2012-11-10Merge tag 'stable/for-linus-3.7-rc5-tag' of ↵Linus Torvalds2-14/+18
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "There are three ARM compile fixes (we forgot to export certain functions and if the drivers are built as an module - we go belly-up). There is also an mismatch of irq_enter() / exit_idle() calls sequence which were fixed some time ago in other piece of codes, but failed to appear in the Xen code. Lastly a fix for to help in the field with troubleshooting in case we cannot get the appropriate parameter and also fallback code when working with very old hypervisors." Bug-fixes: - Fix compile issues on ARM. - Fix hypercall fallback code for old hypervisors. - Print out which HVM parameter failed if it fails. - Fix idle notifier call after irq_enter. * tag 'stable/for-linus-3.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/arm: Fix compile errors when drivers are compiled as modules (export more). xen/arm: Fix compile errors when drivers are compiled as modules. xen/generic: Disable fallback build on ARM. xen/events: fix RCU warning, or Call idle notifier after irq_enter() xen/hvm: If we fail to fetch an HVM parameter print out which flag it is. xen/hypercall: fix hypercall fallback code for very old hypervisors
2012-11-09sparc64: Fix build with mix of modular vs. non-modular crypto drivers.David S. Miller9-8/+24
We tried linking in a single built object to hold the device table, but only works if all of the sparc64 crypto modules get built the same way (modular vs. non-modular). Just include the device ID stub into each driver source file so that the table gets compiled into the correct result in all cases. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09sparc: Support atomic64_dec_if_positive properly.David S. Miller4-2/+20
Sparc32 already supported it, as a consequence of using the generic atomic64 implementation. And the sparc64 implementation is rather trivial. This allows us to set ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE for all of sparc, and avoid the annoying warning from lib/atomic64_test.c Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09of/address: sparc: Declare of_address_to_resource() as an extern function ↵Andreas Larsson1-0/+5
for sparc again This bug-fix makes sure that of_address_to_resource is defined extern for sparc so that the sparc-specific implementation of of_address_to_resource() is once again used when including include/linux/of_address.h in a sparc context. A number of drivers in mainline relies on this function working for sparc. The bug was introduced in a850a7554442f08d3e910c6eeb4ee216868dda1e, "of/address: add empty static inlines for !CONFIG_OF". Contrary to that commit title, the static inlines are added for !CONFIG_OF_ADDRESS, and CONFIG_OF_ADDRESS is never defined for sparc. This is good behavior for the other functions in include/linux/of_address.h, as the extern functions defined in drivers/of/address.c only gets linked when OF_ADDRESS is configured. However, for of_address_to_resource there exists a sparc-specific implementation in arch/sparc/arch/sparc/kernel/of_device_common.c Solution suggested by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irqAndreas Larsson1-2/+4
If an irq is being unlinked concurrently with leon_handle_ext_irq, irq_map[eirq] might be null in leon_handle_ext_irq. Make sure that this is not dereferenced. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09xen/arm: Fix compile errors when drivers are compiled as modules (export more).Stefano Stabellini1-0/+6
The commit 911dec0db4de6ccc544178a8ddaf9cec0a11d533 "xen/arm: Fix compile errors when drivers are compiled as modules." exports the neccessary functions. But to guard ourselves against out-of-tree modules and future drivers hitting this, lets export all of the relevant hypercalls. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-09Merge branch 'for-linus' of ↵Linus Torvalds5-16/+33
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes. I keep the fingers crossed that we now got transparent huge pages ready for prime time." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: fix length calculation in idset.c s390/sclp: fix addressing mode clobber s390: Move css limits from drivers/s390/cio/ to include/asm/. s390/thp: respect page protection in pmd_none() and pmd_present() s390/mm: use pmd_large() instead of pmd_huge() s390/cio: suppress 2nd path verification during resume
2012-11-09Merge branch 'akpm' (Fixes from Andrew)Linus Torvalds1-1/+2
Merge misc fixes from Andrew Morton: "Five fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (5 patches) h8300: add missing L1_CACHE_SHIFT mm: bugfix: set current->reclaim_state to NULL while returning from kswapd() fanotify: fix missing break revert "epoll: support for disabling items, and a self-test app" checkpatch: improve network block comment style checking
2012-11-09h8300: add missing L1_CACHE_SHIFTFengguang Wu1-1/+2
Fix the build error lib/atomic64.c: In function 'lock_addr': lib/atomic64.c:40:11: error: 'L1_CACHE_SHIFT' undeclared (first use in this function) lib/atomic64.c:40:11: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-08arm64: mm: fix booting on systems with no memory below 4GBWill Deacon2-1/+3
Booting on a system with all of its memory above the 4GB boundary breaks for two reasons: (1) We still try to create a non-empty DMA32 zone (2) no-bootmem limits allocations to 0xffffffff This patch fixes these issues for ARM64. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-08arm64: smp: add missing completion for secondary bootWill Deacon1-2/+1
Commit 149c24151e85 ("ARM: SMP: use a timing out completion for cpu hotplug") modified arm's CPU up path to use completions. It seems that we only got half of this patch for arm64, so add the missing call to complete. Reported-by: Jon Brawn <jon.brawn@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-08arm64: compat: select CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSIONWill Deacon2-1/+1
Commit c1d7e01d7877 ("ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION") replaced the __ARCH_WANT_COMPAT_IPC_PARSE_VERSION token with a corresponding Kconfig option instead. This patch updates arm64 to use the latter, rather than #define an unused token. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-08arm64: elf: fix core dumping definitions for GP and FP registersWill Deacon3-25/+3
struct user_fp does not exist for arm64, so use struct user_fpsimd_state instead for the ELF core dumping definitions. Furthermore, since we use regset-based core dumping, we do not need definitions for dump_task_regs and dump_fpu. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-08arm64: perf: use architected event for CPU cycle counterWill Deacon1-8/+2
We currently use a fake event encoding (0xFF) to indicate CPU cycles so that we don't waste an event counter and can target the hardware cycle counter instead. The problem with this approach is that the event space defined by the architecture permits an implementation to allocate 0xFF for some other event. This patch uses the architected cycle counter encoding (0x11) so that we avoid potentially clashing with event encodings on future CPU implementations. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-07xen/arm: Fix compile errors when drivers are compiled as modules.Konrad Rzeszutek Wilk1-0/+5
We end up with: ERROR: "HYPERVISOR_event_channel_op" [drivers/xen/xen-gntdev.ko] undefined! ERROR: "privcmd_call" [drivers/xen/xen-privcmd.ko] undefined! ERROR: "HYPERVISOR_grant_table_op" [drivers/net/xen-netback/xen-netback.ko] undefined! and this patch exports said function (which is implemented in hypercall.S). Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds7-29/+21
Pull arm fixes from Russell King: "Not much here again. The two most notable things here are the sched_clock() fix, which was causing problems with the scheduling of threaded IRQs after a suspend event, and the vfp fix, which afaik has only been seen on some older OMAP boards. Nevertheless, both are fairly important fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7569/1: mm: uninitialized warning corrections ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accesses ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set ARM: 7565/1: sched: stop sched_clock() during suspend
2012-11-06s390/sclp: fix addressing mode clobberHeiko Carstens1-1/+7
The early mini sclp driver may be called in zArch mode either in 31 or 64 bit addressing mode. If called in 31 bit addressing mode the new external interrupt psw however would switch to 64 bit addressing mode. This would cause an addressing exception within the interrupt handler, since the code didn't expect the zArch/31 bit addressing mode combination. Fix this by setting the new psw addressing mode bits so they fit the current addressing mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06s390: Move css limits from drivers/s390/cio/ to include/asm/.Cornelia Huck1-0/+2
There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-05Merge tag 'v3.7-rc4' into upstream-masterCatalin Marinas165-1244/+1652
Linux 3.7-rc4
2012-11-04xen/hypercall: fix hypercall fallback code for very old hypervisorsJan Beulich1-14/+7
While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-04ARM: 7569/1: mm: uninitialized warning correctionsviresh kumar1-1/+1
The variables here are really not used uninitialized. arch/arm/mm/alignment.c: In function 'do_alignment': arch/arm/mm/alignment.c:327:15: warning: 'offset.un' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/arm/mm/alignment.c:748:21: note: 'offset.un' was declared here Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-02Merge tag 'frv-fixes-20121102' of ↵Linus Torvalds6-32/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-frv Pull FRV fixes from David Howells: "A collection of small fixes for the FRV architecture." * tag 'frv-fixes-20121102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-frv: frv: fix the broken preempt frv: switch to saner kernel_execve() semantics FRV: Fix the new-style kernel_thread() stuff FRV: Fix the preemption handling FRV: gcc-4.1.2 also inlines weak functions FRV: Don't objcopy the GNU build_id note FRV: Add missing linux/export.h #inclusions
2012-11-02Merge tag 'stable/for-linus-3.7-rc4-tag' of ↵Linus Torvalds3-11/+25
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Use appropriate macros instead of hand-rolling our own (ARM). - Fixes if FB/KBD closed unexpectedly. - Fix memory leak in /dev/gntdev ioctl calls. - Fix overflow check in xenbus_file_write. - Document cleanup. - Performance optimization when migrating guests. * tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/mmu: Use Xen specific TLB flush instead of the generic one. xen/arm: use the __HVC macro xen/xenbus: fix overflow check in xenbus_file_write() xen-kbdfront: handle backend CLOSED without CLOSING xen-fbfront: handle backend CLOSED without CLOSING xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF x86: remove obsolete comment from asm/xen/hypervisor.h
2012-11-02frv: fix the broken preemptAl Viro1-20/+3
Just get %icc2 into the state we would have after local_irq_disable() and physical IRQ having happened since then. Then we can simply use preempt_schedule_irq() and be done with the whole mess. Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-02frv: switch to saner kernel_execve() semanticsAl Viro3-6/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-02FRV: Fix the new-style kernel_thread() stuffDavid Howells1-2/+3
The kernel_thread() changes for FRV don't work, and FRV fails to boot, starting with: commit 02ce496f152df87be081a64796498942c433a2fd Author: Al Viro <viro@zeniv.linux.org.uk> Date: Tue Sep 18 22:18:51 2012 -0400 Subject: frv: split ret_from_fork, simplify kernel_thread() a lot The problem is that the userspace registers are completely cleared when a kernel thread is created and all subsequent user threads are then copied from that. Unfortunately, however, the TBR and PSR registers are restored from the pt_regs and the values they should be set to are clobbered by the memset. Instead, copy across the old user registers as normal, and then merely alter GR8 and GR9 in it if we're going to execute a kernel thread. Signed-off-by: David Howells <dhowells@redhat.com>
2012-11-02FRV: Fix the preemption handlingDavid Howells1-1/+1
Fix the preemption handling in FRV code where the PREEMPT_ACTIVE value is incorrectly loaded into the threadinfo flags rather than the threadinfo preemption count. Unfortunately, the code cannot be simply converted to use preempt_schedule_irq() as is because FRV uses virtual interrupt disablement to cut down on the cost of actually disabling interrupts and thus local_irq_enable() doesn't actually enable interrupts. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: Al Viro <viro@ZenIV.linux.org.uk>
2012-11-02FRV: Don't objcopy the GNU build_id noteDavid Howells1-4/+6
Don't let objcopy transfer the GNU build_id note into the loadable image as it is located at address 0 and the image ends up >3G in size. Signed-off-by: David Howells <dhowells@redhat.com>
2012-11-02FRV: Add missing linux/export.h #inclusionsDavid Howells1-0/+1
Add missing linux/export.h #inclusions to the FRV arch. Signed-off-by: David Howells <dhowells@redhat.com>
2012-11-01Merge tag 'xtensa-next-20121101' of git://github.com/czankel/xtensa-linuxLinus Torvalds10-132/+104
Pull Xtensa fixes from Chris Zankel: "Some important bug fixes. With the change to uapi, there was a bug introduced that results in an empty syscall table (mult-inclusion bug). Switching to the generic thread/execve allowed us to fix a bug we had in vfork()." * tag 'xtensa-next-20121101' of git://github.com/czankel/xtensa-linux: xtensa: switch to generic sys_execve() xtensa: switch to generic kernel_execve() xtensa: switch to generic kernel_thread() xtensa: reset windowbase/windowstart when cloning the VM xtensa: use physical addresses for bus addresses xtensa: allow multi-inclusion for uapi/unistd.h
2012-10-31KVM: x86: fix vcpu->mmio_fragments overflowXiao Guangrong1-26/+34
After commit b3356bf0dbb349 (KVM: emulator: optimize "rep ins" handling), the pieces of io data can be collected and write them to the guest memory or MMIO together Unfortunately, kvm splits the mmio access into 8 bytes and store them to vcpu->mmio_fragments. If the guest uses "rep ins" to move large data, it will cause vcpu->mmio_fragments overflow The bug can be exposed by isapc (-M isapc): [23154.818733] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ ......] [23154.858083] Call Trace: [23154.859874] [<ffffffffa04f0e17>] kvm_get_cr8+0x1d/0x28 [kvm] [23154.861677] [<ffffffffa04fa6d4>] kvm_arch_vcpu_ioctl_run+0xcda/0xe45 [kvm] [23154.863604] [<ffffffffa04f5a1a>] ? kvm_arch_vcpu_load+0x17b/0x180 [kvm] Actually, we can use one mmio_fragment to store a large mmio access then split it when we pass the mmio-exit-info to userspace. After that, we only need two entries to store mmio info for the cross-mmio pages access Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-31xen/mmu: Use Xen specific TLB flush instead of the generic one.Konrad Rzeszutek Wilk1-1/+20
As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the hypervisor to do a TLB flush on all active vCPUs. If instead we were using the generic one (which ends up being xen_flush_tlb) we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But before we make that hypercall the kernel will IPI all of the vCPUs (even those that were asleep from the hypervisor perspective). The end result is that we needlessly wake them up and do a TLB flush when we can just let the hypervisor do it correctly. This patch gives around 50% speed improvement when migrating idle guest's from one host to another. Oracle-bug: 14630170 CC: stable@vger.kernel.org Tested-by: Jingjie Jiang <jingjie.jiang@oracle.com> Suggested-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30xen/arm: use the __HVC macroStefano Stabellini1-9/+5
Use the new __HVC macro in hypercall.S. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30x86: remove obsolete comment from asm/xen/hypervisor.hOlaf Hering1-1/+0
Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-29ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accessesWill Deacon1-2/+2
Using the 'o' memory constraint in inline assembly can result in GCC generating invalid immediate offsets for memory access instructions with reduced addressing capabilities (i.e. smaller than 12-bit immediate offsets): http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54983 As there is no constraint to specify the exact addressing mode we need, fallback to using 'Q' exclusively for halfword I/O accesses. This may emit an additional add instruction (using an extra register) in order to construct the address but it will always be accepted by GAS. Reported-by: Bastian Hecht <hechtb@googlemail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-29ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and ↵Paul Walmsley3-10/+14
CONFIG_VFPv3 set After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board started crashing during boot with omap2plus_defconfig: [ 3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 3.915954] mmcblk0: p1 [ 4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.093719] Modules linked in: [ 4.096954] CPU: 0 Not tainted (3.6.0-02232-g759e00b #570) [ 4.103149] PC is at vfp_reload_hw+0x1c/0x44 [ 4.107666] LR is at __und_usr_fault_32+0x0/0x8 It turns out that the context save/restore fix unmasked a latent bug in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make VFPv3 usable on ARMv6"). When CONFIG_VFPv3 is set, but the kernel is booted on a pre-VFPv3 core, the code attempts to save and restore the d16-d31 VFP registers. These are only present on non-D16 VFPv3+, so this results in an undefined instruction exception. The code didn't crash before commit 846a136 because the save and restore code was only touching d0-d15, present on all VFP. Fix by implementing a request from Russell King to add a new HWCAP flag that affirmatively indicates the presence of the d16-d31 registers: http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2 and some feedback from Måns to clarify the name of the HWCAP flag. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Martin <dave.martin@linaro.org> Cc: Måns Rullgård <mans.rullgard@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-29ARM: 7565/1: sched: stop sched_clock() during suspendFelipe Balbi 22-16/+4
The scheduler imposes a requirement to sched_clock() which is to stop the clock during suspend, if we don't do that any RT thread will be rescheduled in the future which might cause any sort of problems. This became an issue on OMAP when we converted omap-i2c.c to use threaded IRQs, it turned out that depending on how much time we spent on suspend, the I2C IRQ thread would end up being rescheduled so far in the future that I2C transfers would timeout and, because omap_hsmmc depends on an I2C-connected device to detect if an MMC card is inserted in the slot, our rootfs would just vanish. arch/arm/kernel/sched_clock.c already had an optional implementation (sched_clock_needs_suspend()) which would handle scheduler's requirement properly, what this patch does is simply to make that implementation non-optional. Note that this has the side-effect that printk timings won't reflect the actual time spent on suspend so other methods to measure that will have to be used. This has been tested with beagleboard XM (OMAP3630) and pandaboard rev A3 (OMAP4430). Suspend to RAM is now working after this patch. Thanks to Kevin Hilman for helping out with debugging. Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-28sparc: Wire up sys_kcmp.David S. Miller3-3/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28sparc64: Improvde documentation and readability of atomic backoff code.David S. Miller5-10/+55
Document what's going on in asm/backoff.h with a large and descriptive comment. Refer to it above the cpu_relax() definition in asm/processor_64.h Rename the pause patching section to have "3insn" in it's name like the other patching sections do. Based upon feedback from Sam Ravnborg. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28Merge tag 'fixes-for-3.7' of ↵Linus Torvalds54-86/+217
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...
2012-10-27sparc64: Use pause instruction when available.David S. Miller5-16/+62
In atomic backoff and cpu_relax(), use the pause instruction found on SPARC-T4 and later. It makes the cpu strand unselectable for the given number of cycles, unless an intervening disrupting trap occurs. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-27sparc64: Fix cpu strand yielding.David S. Miller2-2/+8
For atomic backoff, we just loop over an exponentially backed off counter. This is extremely ineffective as it doesn't actually yield the cpu strand so that other competing strands can use the cpu core. In cpus previous to SPARC-T4 we have to do this in a slightly hackish way, by doing an operation with no side effects that also happens to mark the strand as unavailable. The mechanism we choose for this is three reads of the %ccr (condition-code) register into %g0 (the zero register). SPARC-T4 has an explicit "pause" instruction, and we'll make use of that in a subsequent commit. Yield strands also in cpu_relax(). We really should have done this a very long time ago. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-27Revert "ARM i.MX25: Fix PWM per clock lookups"Arnd Bergmann1-4/+4
This reverts commit 92063cee118655d25b50d04eb77b012f3287357a, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-27ARM: versatile: fix versatile_defconfigArnd Bergmann1-0/+1
With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-27ARM: mvebu: update defconfig with 3.7 changesThomas Petazzoni1-3/+7
The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-27ARM: at91: fix at91x40 buildArnd Bergmann1-1/+1
patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-26sparc64: Make montmul/montsqr/mpmul usable in 32-bit threads.David S. Miller13-61/+117
The Montgomery Multiply, Montgomery Square, and Multiple-Precision Multiply instructions work by loading a combination of the floating point and multiple register windows worth of integer registers with the inputs. These values are 64-bit. But for 32-bit userland processes we only save the low 32-bits of each integer register during a register spill. This is because the register window save area is in the user stack and has a fixed layout. Therefore, the only way to use these instruction in 32-bit mode is to perform the following sequence: 1) Load the top-32bits of a choosen integer register with a sentinel, say "-1". This will be in the outer-most register window. The idea is that we're trying to see if the outer-most register window gets spilled, and thus the 64-bit values were truncated. 2) Load all the inputs for the montmul/montsqr/mpmul instruction, down to the inner-most register window. 3) Execute the opcode. 4) Traverse back up to the outer-most register window. 5) Check the sentinel, if it's still "-1" store the results. Otherwise retry the entire sequence. This retry is extremely troublesome. If you're just unlucky and an interrupt or other trap happens, it'll push that outer-most window to the stack and clear the sentinel when we restore it. We could retry forever and never make forward progress if interrupts arrive at a fast enough rate (consider perf events as one example). So we have do limited retries and fallback to software which is extremely non-deterministic. Luckily it's very straightforward to provide a mechanism to let 32-bit applications use a 64-bit stack. Stacks in 64-bit mode are biased by 2047 bytes, which means that the lowest bit is set in the actual %sp register value. So if we see bit zero set in a 32-bit application's stack we treat it like a 64-bit stack. Runtime detection of such a facility is tricky, and cumbersome at best. For example, just trying to use a biased stack and seeing if it works is hard to recover from (the signal handler will need to use an alt stack, plus something along the lines of longjmp). Therefore, we add a system call to report a bitmask of arch specific features like this in a cheap and less hairy way. With help from Andy Polyakov. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26Merge tag 'tty-3.7-rc3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fix from Greg Kroah-Hartman: "Here is one patch, a revert of a omap serial driver patch that was causing problems, for your 3.7-rc tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: omap: fix software flow control"