summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds115-757/+4144
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24Merge branch '4.4-fixes' into mips-for-linux-nextRalf Baechle6-3/+11
2016-01-24MIPS: zboot: Add support for serial debug using the PROMAlban Bedel3-0/+12
As most platforms implement the PROM serial interface prom_putchar() add a simple bridge to allow re-using this code for zboot. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: zboot: Avoid useless rebuildsAlban Bedel1-6/+8
Add dummy.o to the targets list, and fill targets automatically from $(vmlinuzobjs) to avoid having to maintain two lists. When building with XZ compression copy ashldi3.c to the build directory to use a different object file for the kernel and zboot. Without this the same object file need to be build with different flags which cause a rebuild at every run. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIBFlorian Fainelli1-0/+1
Allow BMIPS_GENERIC supported platforms to build GPIO controller drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Cc: gregory.0xf0@gmail.com Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() functionSimon Arlott2-13/+0
Remove bcm63xx_nvram_get_psi_size() as it now has no users. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structureSimon Arlott1-96/+0
Move Broadcom BCM963xx image tag data structure to include/linux/ so that drivers outside of mach-bcm63xx can use it. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm63xx: nvram: Use nvram structure definition from header fileSimon Arlott1-32/+3
Use the common definition of the nvram structure from the header file include/linux/bcm963xx_nvram.h instead of maintaining a separate copy. Read the version 5 size of nvram data from memory and then call the new checksum verification function from the header file. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Add missing newline to kvm_err()James Hogan1-1/+1
Add missing newline to end of kvm_err string when guest PMAP couldn't be allocated. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move KVM specific opcodes into asm/inst.hJames Hogan4-28/+5
The header arch/mips/kvm/opcode.h defines a few extra opcodes which aren't in arch/mips/include/uapi/asm/inst.h. There's nothing KVM specific about them, so lets move them into inst.h where they belong and delete the header. Note that mfmcz_op is renamed to mfmc0_op to match the instruction set manual, and wait_op was already added to inst.h in commit b0a3eae2b943 ("MIPS: inst.h: define COP0 wait op"), merged in v3.16-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11895/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Use cacheops.h definitionsJames Hogan1-22/+8
Drop the custom cache operation code definitions used by KVM for emulating guest CACHE instructions, and switch to use the existing definitions in <asm/cacheops.h>. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11893/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Break down cacheops.h definitionsJames Hogan1-42/+64
Most of the cache op codes defined in cacheops.h are split into a 2-bit cache identifier, and a 3-bit cache op code which does largely the same thing semantically regardless of the cache identifier. To allow the use of these definitions by KVM for decoding cache ops, break the definitions down into parts where it makes sense to do so, and add masks for the Cache and Op field within the cache op. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Use EXCCODE_ constants with set_except_vector()James Hogan2-30/+30
The first argument to set_except_vector is the ExcCode, which we now have definitions for. Lets make use of them. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Update trap codesJames Hogan1-2/+10
Add a few missing trap codes. [ralf@linux-mips.org: Drop removal of exception codes. I don't care what the incomplete architecture spec says; it can't change existing hardware and VCEI is supported indeed.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move Cause.ExcCode trap codes to mipsregs.hJames Hogan5-83/+80
Move the Cause.ExcCode trap code definitions from kvm_host.h to mipsregs.h, since they describe architectural bits rather than KVM specific constants, and change the prefix from T_ to EXCCODE_. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11891/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Make kvm_mips_{init,exit}() staticJames Hogan1-2/+2
The module init and exit functions have no need to be global, so make them static. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Refactor added offsetof()sJames Hogan1-7/+3
When calculating the offsets into the commpage for dynamically translated mtc0/mfc0 guest instructions, multiple offsetof()s are added together to find the offset of the specific register in the mips_coproc, within the commpage. Simplify each of these cases to a single offsetof() to find the offset of the specific register within the commpage. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11888/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Convert EXPORT_SYMBOL to _GPLJames Hogan2-19/+19
Export symbols only to GPL modules to match other KVM symbols in virt/kvm/ and arch/*/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop unused kvm_mips_host_tlb_inv_index()James Hogan2-38/+0
The function kvm_mips_host_tlb_inv_index() is unused, so drop it completely. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move definition of DC bit to mipsregs.hJames Hogan2-3/+2
The CAUSEB_DC and CAUSEF_DC definitions used by KVM are defined in asm/kvm_host.h, but all the other Cause register field definitions are found in asm/mipsregs.h. Lets reunite the DC bit definitions with its friends in mipsregs.h. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11885/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop some unused definitions from kvm_host.hJames Hogan1-5/+0
Some definitions in the MIPS asm/kvm_host.h are completely unused, so lets drop them. MS_TO_NS is no longer used since commit e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation"). The others don't appear ever to have been used. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Trivial whitespace and style fixesJames Hogan5-15/+14
A bunch of misc whitespace and style fixes within arch/mips/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: pic32mzda: Add initial PIC32MZDA Starter Kit defconfigJoshua Henderson1-0/+89
This adds an initial default config that enables all available PIC32 drivers and is enough for booting a PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: dts: Add initial DTS for the PIC32MZDA Starter KitJoshua Henderson6-0/+697
This adds basic DTS configuration for the PIC32MZDA chip and in turn the PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Add support for PIC32MZDA platformJoshua Henderson21-0/+1454
This adds support for the Microchip PIC32 MIPS microcontroller with the specific variant PIC32MZDA. PIC32MZDA is based on the MIPS m14KEc core and boots using device tree. This includes an early pin setup and early clock setup needed prior to device tree being initialized. In additon, an interface is provided to synchronize access to registers shared across several peripherals. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12097/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bmips: Improve BCM6368 device treeÁlvaro Fernández Rojas1-0/+22
Add brcm,bcm6358-leds node to bcm6368.dtsi Add reboot support (syscon-reboot as defined in BCM6328) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bmips: Improve BCM6328 device treeÁlvaro Fernández Rojas1-0/+9
Adds bcm6328-leds node to bcm6328.dtsi Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: ptrace: Drop cp0_tcstatus from regoffset_table[]James Hogan1-3/+0
The cp0_tcstatus member of struct pt_regs was removed along with the rest of SMTC in v3.16, commit b633648c5ad3 ("MIPS: MT: Remove SMTC support"), however recent uprobes support in v4.3 added back a reference to it in the regoffset_table[] in ptrace.c. Remove it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: 40e084a506eb ("MIPS: Add uprobes support.") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: TXx9: iocled: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11925/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: RB532: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11924/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: TXx9: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11923/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: ar7: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11922/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Alchemy: Be sure to clamp return valueLinus Walleij1-3/+3
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11921/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Fix macro typoJaedon Shin1-1/+1
Change the CONFIG_MIPS_CMDLINE_EXTEND to CONFIG_MIPS_CMDLINE_DTB_EXTEND to resolve the EXTEND_WITH_PROM macro. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Fixes: 2024972ef533 ("MIPS: Make the kernel arguments from dtb available") Reviewed-by: Alexander Sverdlin <alexander.svedlin@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11909/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: smp-cps: Ensure secondary cores start with EVA disabledMatt Redfearn2-0/+7
The kernel currently assumes that a core will start up in legacy mode using the exception base provided through the CM GCR registers. If a core has been configured in hardware to start in EVA mode, these assumptions will fail. This patch ensures that secondary cores are initialized to meet these assumptions. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11907/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: io.h: Define `ioremap_cache'Maciej W. Rozycki1-0/+1
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12040/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: math-emu: dsemul: Reduce `get_isa16_mode' clutterMaciej W. Rozycki1-8/+9
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: inst.h: Fix some instruction descriptionsMaciej W. Rozycki1-2/+2
Fix the description of the microMIPS NOP16 encoding or MM_NOP16, which is not equivalent to the MIPS16 NOP instruction. This is 0x0c00 and represents the microMIPS `MOVE16 $0, $0' operation, whereas MIPS16 NOP is encoded as 0x6500, representing `MOVE $0, $16'. Also fix a typo in `mm_fp0_format' description. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12177/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: math-emu: dsemul: Correct description of the emulation frameMaciej W. Rozycki1-7/+2
Remove irrelevant content from the description of the emulation frame in `mips_dsemul', referring to bare-metal configurations. Update the text, reflecting the change made with commit ba3049ed4086 ("MIPS: Switch FPU emulator trap to BREAK instruction."), where we switched from using an address error exception on an unaligned access to the use of a BREAK 514 instruction causing a breakpoint exception instead. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12176/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: math-emu: Correct the emulation of microMIPS ADDIUPC instructionMaciej W. Rozycki2-2/+30
Emulate the microMIPS ADDIUPC instruction directly in `mips_dsemul'. If executed in the emulation frame, this instruction produces an incorrect result, because the value of the PC there is not the same as where the instruction originated. Reshape code so as to handle all microMIPS cases together. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12175/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: math-emu: Make microMIPS branch delay slot emulation workMaciej W. Rozycki3-6/+9
Complement commit 102cedc32a6e ("MIPS: microMIPS: Floating point support.") which introduced microMIPS FPU emulation, but did not adjust the encoding of the BREAK instruction used to terminate the branch delay slot emulation frame. Consequently the execution of any such frame is indeterminate and, depending on CPU configuration, will result in random code execution or an offending program being terminated with SIGILL. This is because the regular MIPS BREAK instruction is encoded with the 0 major and the 0xd minor opcode, however in the microMIPS instruction set this major/minor opcode pair denotes an encoding reserved for the DSP ASE. Instead the microMIPS BREAK instruction is encoded with the 0 major and the 0x7 minor opcode. Use the correct BREAK encoding for microMIPS FPU emulation then. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12174/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: math-emu: dsemul: Fix ill formatting of microMIPS partMaciej W. Rozycki1-6/+12
Correct formatting breakage introduced with commit 102cedc32a6e ("MIPS: microMIPS: Floating point support."), so that further changes to this code can be consistent. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12173/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: math-emu: Correctly handle NOP emulationMaciej W. Rozycki2-6/+12
Fix an issue introduced with commit 9ab4471c9f1b ("MIPS: math-emu: Correct delay-slot exception propagation") where the emulation of a NOP instruction signals the need to terminate the emulation loop. This in turn, if the PC has not changed from the entry to the loop, will cause the kernel to terminate the program with SIGILL. Consider this program: static double div(double d) { do d /= 2.0; while (d > .5); return d; } int main(int argc, char **argv) { return div(argc); } which gets compiled to the following binary code: 00400490 <main>: 400490: 44840000 mtc1 a0,$f0 400494: 3c020040 lui v0,0x40 400498: d44207f8 ldc1 $f2,2040(v0) 40049c: 46800021 cvt.d.w $f0,$f0 4004a0: 46220002 mul.d $f0,$f0,$f2 4004a4: 4620103c c.lt.d $f2,$f0 4004a8: 4501fffd bc1t 4004a0 <main+0x10> 4004ac: 00000000 nop 4004b0: 4620000d trunc.w.d $f0,$f0 4004b4: 03e00008 jr ra 4004b8: 44020000 mfc1 v0,$f0 4004bc: 00000000 nop Where the FPU emulator is used, depending on the number of command-line arguments this code will either run to completion or terminate with SIGILL. If no arguments are specified, then BC1T will not be taken, NOP will not be emulated and code will complete successfully. If one argument is specified, then BC1T will be taken once and NOP will be emulated. At this point the entry PC value will be 0x400498 and the new PC value, set by `mips_dsemul' will be 0x4004a0, the target of BC1T. The emulation loop will terminate, but SIGILL will not be issued, because the PC has changed. The FPU emulator will be entered again and on the second execution BC1T will not be taken, NOP will not be emulated and code will complete successfully. If two or more arguments are specified, then the first execution of BC1T will proceed as above. Upon reentering the FPU emulator the emulation loop will continue to BC1T, at which point the branch will be taken and NOP emulated again. At this point however the entry PC value will be 0x4004a0, the same as the target of BC1T. This will make the emulator conclude that execution has not advanced and therefore an unsupported FPU instruction has been encountered, and SIGILL will be sent to the process. Fix the problem by extending the internal API of `mips_dsemul', making it return -1 if no delay slot emulation frame has been made, the instruction has been handled and execution of the emulation loop needs to continue as if nothing happened. Remove code from `mips_dsemul' to reproduce steps made by the emulation loop at the conclusion of each iteration, as those will be reached normally now. Adjust call sites accordingly. Document the API. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12172/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefsHuacai Chen2-3/+3
Commit be0c37c985eddc4 (MIPS: Rearrange PTE bits into fixed positions.) defines fixed PTE bits for MIPS R2. Then, commit d7b631419b3d230a4d383 (MIPS: pgtable-bits: Fix XPA damage to R6 definitions.) adds the MIPS R6 definitions in the same way as MIPS R2. But some R6 #ifdefs in the later commit are missing, so in this patch I fix that. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: sync-r4k: reduce skew while synchronizationHuacai Chen1-24/+8
While synchronization, count register will go backwards for the master. If synchronise_count_master() runs before synchronise_count_slave(), skew becomes even more. The skew is very harmful for CPU hotplug (CPU0 do synchronization with CPU1, then CPU0 do synchronization with CPU2 and CPU0's count goes backwards, so it will be out of sync with CPU1). After the commit cf9bfe55f24973a8f40e2 (MIPS: Synchronize MIPS count one CPU at a time), we needn't evaluate count_reference at the beginning of synchronise_count_master() any more. Thus, we evaluate the initcount (It seems like count_reference is redundant) in the 2nd loop. Since we write the count register in the last loop, we don't need additional barriers (the existing memory barriers are enough). Moreover, I think we loop 3 times is enough to get a primed instruction cache, this can also get less skew than looping 5 times. Comments are also updated in this patch. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-23Merge branch 'for-linus' of ↵Linus Torvalds3-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull final vfs updates from Al Viro: - The ->i_mutex wrappers (with small prereq in lustre) - a fix for too early freeing of symlink bodies on shmem (they need to be RCU-delayed) (-stable fodder) - followup to dedupe stuff merged this cycle * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: abort dedupe loop if fatal signals are pending make sure that freeing shmem fast symlinks is RCU-delayed wrappers for ->i_mutex access lustre: remove unused declaration
2016-01-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-14/+8
Merge small final update from Andrew Morton: - DAX feature work: add fsync/msync support - kfree cleanup, MAINTAINERS update * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: return arch/sh to maintained state, with new maintainers tree wide: use kvfree() than conditional kfree()/vfree() dax: never rely on bh.b_dev being set by get_block() xfs: call dax_pfn_mkwrite() for DAX fsync/msync ext4: call dax_pfn_mkwrite() for DAX fsync/msync ext2: call dax_pfn_mkwrite() for DAX fsync/msync dax: add support for fsync/sync mm: add find_get_entries_tag() dax: support dirty DAX entries in radix tree pmem: add wb_cache_pmem() to the PMEM API dax: fix conversion of holes to PMDs dax: fix NULL pointer dereference in __dax_dbg()
2016-01-22Merge tag 'please-pull-copy_file_range' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 copy_file_range syscall update from Tony Luck: "Another release, another new syscall to wire up" * tag 'please-pull-copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable copy_file_range syscall for ia64
2016-01-22Merge tag 'armsoc-tegra' of ↵Linus Torvalds16-64/+6896
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols
2016-01-22Merge tag 'armsoc-fixes' of ↵Linus Torvalds3-14/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: qcom/spm: shut up uninitialized variable warning ARM: realview: fix device tree build ARM: debug-ll: fix BCM63xx entry for multiplatform ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz