summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-04-09powerpc: Remove dead code in sycall entryMichael Neuling1-8/+0
In: commit 742415d6b66bf09e3e73280178ef7ec85c90b7ee Author: Michael Neuling <mikey@neuling.org> powerpc: Turn syscall handler into macros We converted the syscall entry code onto macros, but in doing this we introduced some cruft that's never run and should never have been added. This removes that code. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Use of_node_init() for the fakenode in msi_bitmap.cLi Zhong1-1/+1
This patch uses of_node_init() to initialize the kobject in the fake node used in test_of_node(), to avoid following kobject warning. [ 0.897654] kobject: '(null)' (c0000007ca183a08): is not initialized, yet kobject_put() is being called. [ 0.897682] ------------[ cut here ]------------ [ 0.897688] WARNING: at lib/kobject.c:670 [ 0.897692] Modules linked in: [ 0.897701] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #1 [ 0.897708] task: c0000007ca100000 ti: c0000007ca180000 task.ti: c0000007ca180000 [ 0.897715] NIP: c00000000046a1f0 LR: c00000000046a1ec CTR: 0000000001704660 [ 0.897721] REGS: c0000007ca1835c0 TRAP: 0700 Not tainted (3.14.0+) [ 0.897727] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 0000000d [ 0.897749] CFAR: c0000000008ef4ec SOFTE: 1 GPR00: c00000000046a1ec c0000007ca183840 c0000000014c59b8 000000000000005c GPR04: 0000000000000001 c000000000129770 0000000000000000 0000000000000001 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000000000000 c00000000f221200 c00000000000c350 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c00000000144e808 c000000000c56f20 00000000000000d8 GPR28: c000000000cd5058 0000000000000000 c000000001454ca8 c0000007ca183a08 [ 0.897856] NIP [c00000000046a1f0] .kobject_put+0xa0/0xb0 [ 0.897863] LR [c00000000046a1ec] .kobject_put+0x9c/0xb0 [ 0.897868] Call Trace: [ 0.897874] [c0000007ca183840] [c00000000046a1ec] .kobject_put+0x9c/0xb0 (unreliable) [ 0.897885] [c0000007ca1838c0] [c000000000743f9c] .of_node_put+0x2c/0x50 [ 0.897894] [c0000007ca183940] [c000000000c83954] .test_of_node+0x1dc/0x208 [ 0.897902] [c0000007ca183b80] [c000000000c839a4] .msi_bitmap_selftest+0x24/0x38 [ 0.897913] [c0000007ca183bf0] [c00000000000bb34] .do_one_initcall+0x144/0x200 [ 0.897922] [c0000007ca183ce0] [c000000000c748e4] .kernel_init_freeable+0x2b4/0x394 [ 0.897931] [c0000007ca183db0] [c00000000000c374] .kernel_init+0x24/0x130 [ 0.897940] [c0000007ca183e30] [c00000000000a2f4] .ret_from_kernel_thread+0x5c/0x68 [ 0.897947] Instruction dump: [ 0.897952] 7fe3fb78 38210080 e8010010 ebe1fff8 7c0803a6 4800014c e89f0000 3c62ff6e [ 0.897971] 7fe5fb78 3863a950 48485279 60000000 <0fe00000> 39000000 393f0038 4bffff80 [ 0.897992] ---[ end trace 1eeffdb9f825a556 ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/mm: NUMA pte should be handled via slow path in get_user_pages_fast()Aneesh Kumar K.V1-0/+13
We need to handle numa pte via the slow path Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/powernv: Fix endian issues with sensor codeAnton Blanchard2-3/+4
One OPAL call and one device tree property needed byte swapping. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-08Merge branch 'akpm' (incoming from Andrew)Linus Torvalds1-1/+7
Merge a few more patches from Andrew Morton: "A few leftovers" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: fs/ncpfs/dir.c: fix indenting in ncp_lookup() ncpfs/inode.c: fix mismatch printk formats and arguments ncpfs: remove now unused PRINTK macro ncpfs: convert PPRINTK to ncp_vdbg ncpfs: convert DPRINTK/DDPRINTK to ncp_dbg ncpfs: Add pr_fmt and convert printks to pr_<level> arch/x86/mm/kmemcheck/kmemcheck.c: use kstrtoint() instead of sscanf() lib/percpu_counter.c: fix bad percpu counter state during suspend autofs4: check dev ioctl size before allocating mm: vmscan: do not swap anon pages just because free+file is low
2014-04-08arch/x86/mm/kmemcheck/kmemcheck.c: use kstrtoint() instead of sscanf()David Rientjes1-1/+7
Kmemcheck should use the preferred interface for parsing command line arguments, kstrto*(), rather than sscanf() itself. Use it appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08Merge tag 'arm64-upstream' of ↵Linus Torvalds8-31/+87
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull second set of arm64 updates from Catalin Marinas: "A second pull request for this merging window, mainly with fixes and docs clarification: - Documentation clarification on CPU topology and booting requirements - Additional cache flushing during boot (needed in the presence of external caches or under virtualisation) - DMA range invalidation fix for non cache line aligned buffers - Build failure fix with !COMPAT - Kconfig update for STRICT_DEVMEM" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix DMA range invalidation for cache line unaligned buffers arm64: Add missing Kconfig for CONFIG_STRICT_DEVMEM arm64: fix !CONFIG_COMPAT build failures Revert "arm64: virt: ensure visibility of __boot_cpu_mode" arm64: Relax the kernel cache requirements for boot arm64: Update the TCR_EL1 translation granule definitions for 16K pages ARM: topology: Make it clear that all CPUs need to be described
2014-04-08Merge branch 'for-linus' of ↵Linus Torvalds36-958/+892
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull second set of s390 patches from Martin Schwidefsky: "The second part of Heikos uaccess rework, the page table walker for uaccess is now a thing of the past (yay!) The code change to fix the theoretical TLB flush problem allows us to add a TLB flush optimization for zEC12, this machine has new instructions that allow to do CPU local TLB flushes for single pages and for all pages of a specific address space. Plus the usual bug fixing and some more cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uaccess: rework uaccess code - fix locking issues s390/mm,tlb: optimize TLB flushing for zEC12 s390/mm,tlb: safeguard against speculative TLB creation s390/irq: Use defines for external interruption codes s390/irq: Add defines for external interruption codes s390/sclp: add timeout for queued requests kvm/s390: also set guest pages back to stable on kexec/kdump lcs: Add missing destroy_timer_on_stack() s390/tape: Add missing destroy_timer_on_stack() s390/tape: Use del_timer_sync() s390/3270: fix crash with multiple reset device requests s390/bitops,atomic: add missing memory barriers s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
2014-04-08ARM: 8016/1: Check cpu id in pj4_cp0_init.Chao Xie Linux1-0/+4
Check cpu id in pj4_cp0_init. So for no-PJ4 V7 cpus, pj4_cpu0_init just return. This fix will help to make the all the V7 cpus(PJ4 and no-PJ4) can use code. Signed-off-by: Chao Xie <chao.xie@marvell.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-08ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some ↵Chao Xie Linux1-0/+19
differences with V7 The patch add cpu_is_pj4 at arch/arm/include/asm/cputype.h PJ4 has some differences with V7, for example the coprocessor. To disinguish this kind of situation. cpu_is_pj4 is needed. Signed-off-by: Chao Xie <chao.xie@marvell.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-08Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds4-0/+209
Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
2014-04-08ARM: add missing system_misc.h include to process.cRussell King1-0/+1
arm_pm_restart(), arm_pm_idle() and soft_restart() are all declared in system_misc.h, but this file is not included in process.c. Add this missing include. Found via sparse: arch/arm/kernel/process.c:98:6: warning: symbol 'soft_restart' was not declared. Should it be static? arch/arm/kernel/process.c:127:6: warning: symbol 'arm_pm_restart' was not declared. Should it be static? arch/arm/kernel/process.c:134:6: warning: symbol 'arm_pm_idle' was not declared. Should it be static? Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-08Merge branch 'pm-cpufreq'Rafael J. Wysocki5-10/+22
* pm-cpufreq: cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h cpufreq: create another field .flags in cpufreq_frequency_table cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table cpufreq: don't print value of .driver_data from core cpufreq: ia64: don't set .driver_data to index cpufreq: powernv: Select CPUFreq related Kconfig options for powernv cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids cpufreq: powernv: cpufreq driver for powernv platform cpufreq: at32ap: don't declare local variable as static cpufreq: loongson2_cpufreq: don't declare local variable as static cpufreq: unicore32: fix typo issue for 'clk' cpufreq: exynos: Disable on multiplatform build
2014-04-08Merge branch 'pm-cpuidle'Rafael J. Wysocki1-1/+3
* pm-cpuidle: cpuidle: sysfs: Export target residency information intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-08Merge branch 'release' of ↵Rafael J. Wysocki1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-cpuidle Pull intel_idle and turbostat material for v3.15-rc1 from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-08arm64: Fix DMA range invalidation for cache line unaligned buffersCatalin Marinas1-4/+11
If the buffer needing cache invalidation for inbound DMA does start or end on a cache line aligned address, we need to use the non-destructive clean&invalidate operation. This issue was introduced by commit 7363590d2c46 (arm64: Implement coherent DMA API based on swiotlb). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Jon Medhurst (Tixy) <tixy@linaro.org>
2014-04-07Merge tag 'arc-v3.15-rc1' of ↵Linus Torvalds21-115/+114
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC changes from Vineet Gupta: - Support for external initrd from Noam - Fix broken serial console in nsimosci Virtual Platform - Reuse of ENTRY/END assembler macros across hand asm code - Other minor fixes here and there * tag 'arc-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [nsimosci] Unbork console ARC: [nsimosci] Change .dts to use generic 8250 UART ARC: [SMP] General Fixes ARC: Remove unused DT template file ARC: [clockevent] simplify timer ISR ARC: [clockevent] can't be SoC specific ARC: Remove ARC_HAS_COH_RTSC ARC: switch to generic ENTRY/END assembler annotations ARC: support external initrd ARC: add uImage to .gitignore ARC: [arcfpga] Fix __initconst data const-correctness
2014-04-07Merge branch 'akpm' (incoming from Andrew)Linus Torvalds56-393/+297
Merge second patch-bomb from Andrew Morton: - the rest of MM - zram updates - zswap updates - exit - procfs - exec - wait - crash dump - lib/idr - rapidio - adfs, affs, bfs, ufs - cris - Kconfig things - initramfs - small amount of IPC material - percpu enhancements - early ioremap support - various other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits) MAINTAINERS: update Intel C600 SAS driver maintainers fs/ufs: remove unused ufs_super_block_third pointer fs/ufs: remove unused ufs_super_block_second pointer fs/ufs: remove unused ufs_super_block_first pointer fs/ufs/super.c: add __init to init_inodecache() doc/kernel-parameters.txt: add early_ioremap_debug arm64: add early_ioremap support arm64: initialize pgprot info earlier in boot x86: use generic early_ioremap mm: create generic early_ioremap() support x86/mm: sparse warning fix for early_memremap lglock: map to spinlock when !CONFIG_SMP percpu: add preemption checks to __this_cpu ops vmstat: use raw_cpu_ops to avoid false positives on preemption checks slub: use raw_cpu_inc for incrementing statistics net: replace __this_cpu_inc in route.c with raw_cpu_inc modules: use raw_cpu_write for initialization of per cpu refcount. mm: use raw_cpu ops for determining current NUMA node percpu: add raw_cpu_ops slub: fix leak of 'name' in sysfs_slab_add ...
2014-04-07arm64: add early_ioremap supportMark Salter10-50/+167
Add support for early IO or memory mappings which are needed before the normal ioremap() is usable. This also adds fixmap support for permanent fixed mappings such as that used by the earlyprintk device register region. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07arm64: initialize pgprot info earlier in bootMark Salter3-2/+4
Presently, paging_init() calls init_mem_pgprot() to initialize pgprot values used by macros such as PAGE_KERNEL, PAGE_KERNEL_EXEC, etc. The new fixmap and early_ioremap support also needs to use these macros before paging_init() is called. This patch moves the init_mem_pgprot() call out of paging_init() and into setup_arch() so that pgprot_default gets initialized in time for fixmap and early_ioremap. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07x86: use generic early_ioremapMark Salter6-240/+13
Move x86 over to the generic early ioremap implementation. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07x86/mm: sparse warning fix for early_memremapDave Young2-4/+9
This patch series takes the common bits from the x86 early ioremap implementation and creates a generic implementation which may be used by other architectures. The early ioremap interfaces are intended for situations where boot code needs to make temporary virtual mappings before the normal ioremap interfaces are available. Typically, this means before paging_init() has run. This patch (of 6): There's a lot of sparse warnings for code like below: void *a = early_memremap(phys_addr, size); early_memremap intend to map kernel memory with ioremap facility, the return pointer should be a kernel ram pointer instead of iomem one. For making the function clearer and supressing sparse warnings this patch do below two things: 1. cast to (__force void *) for the return value of early_memremap 2. add early_memunmap function and pass (__force void __iomem *) to iounmap From Boris: "Ingo told me yesterday, it makes sense too. I'd guess we can try it. FWIW, all callers of early_memremap use the memory they get remapped as normal memory so we should be safe" Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07percpu: add raw_cpu_opsChristoph Lameter2-57/+57
The kernel has never been audited to ensure that this_cpu operations are consistently used throughout the kernel. The code generated in many places can be improved through the use of this_cpu operations (which uses a segment register for relocation of per cpu offsets instead of performing address calculations). The patch set also addresses various consistency issues in general with the per cpu macros. A. The semantics of __this_cpu_ptr() differs from this_cpu_ptr only because checks are skipped. This is typically shown through a raw_ prefix. So this patch set changes the places where __this_cpu_ptr() is used to raw_cpu_ptr(). B. There has been the long term wish by some that __this_cpu operations would check for preemption. However, there are cases where preemption checks need to be skipped. This patch set adds raw_cpu operations that do not check for preemption and then adds preemption checks to the __this_cpu operations. C. The use of __get_cpu_var is always a reference to a percpu variable that can also be handled via a this_cpu operation. This patch set replaces all uses of __get_cpu_var with this_cpu operations. D. We can then use this_cpu RMW operations in various places replacing sequences of instructions by a single one. E. The use of this_cpu operations throughout will allow other arches than x86 to implement optimized references and RMV operations to work with per cpu local data. F. The use of this_cpu operations opens up the possibility to further optimize code that relies on synchronization through per cpu data. The patch set works in a couple of stages: I. Patch 1 adds the additional raw_cpu operations and raw_cpu_ptr(). Also converts the existing __this_cpu_xx_# primitive in the x86 code to raw_cpu_xx_#. II. Patch 2-4 use the raw_cpu operations in places that would give us false positives once they are enabled. III. Patch 5 adds preemption checks to __this_cpu operations to allow checking if preemption is properly disabled when these functions are used. IV. Patches 6-20 are patches that simply replace uses of __get_cpu_var with this_cpu_ptr. They do not depend on any changes to the percpu code. No preemption tests are skipped if they are applied. V. Patches 21-46 are conversion patches that use this_cpu operations in various kernel subsystems/drivers or arch code. VI. Patches 47/48 (not included in this series) remove no longer used functions (__this_cpu_ptr and __get_cpu_var). These should only be applied after all the conversion patches have made it and after we have done additional passes through the kernel to ensure that none of the uses of these functions remain. This patch (of 46): The patches following this one will add preemption checks to __this_cpu ops so we need to have an alternative way to use this_cpu operations without preemption checks. raw_cpu_ops will be the basis for all other ops since these will be the operations that do not implement any checks. Primitive operations are renamed by this patch from __this_cpu_xxx to raw_cpu_xxxx. Also change the uses of the x86 percpu primitives in preempt.h. These depend directly on asm/percpu.h (header #include nesting issue). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Alex Shi <alex.shi@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bryan Wu <cooloney@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: David Daney <david.daney@cavium.com> Cc: David Miller <davem@davemloft.net> Cc: David S. Miller <davem@davemloft.net> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Hedi Berriche <hedi@sgi.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: John Stultz <john.stultz@linaro.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mike Travis <travis@sgi.com> Cc: Neil Brown <neilb@suse.de> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Robert Richter <rric@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07asm/system.h: um: arch_align_stack() moved to asm/exec.hDavid Howells1-1/+1
arch_align_stack() moved to asm/exec.h, so change the comment referring to asm/system.h which no longer exists. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König29-43/+43
If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07x86: always define BUG() and HAVE_ARCH_BUG, even with !CONFIG_BUGJosh Triplett1-3/+0
This ensures that BUG() always has a definition that causes a trap (via an undefined instruction), and that the compiler still recognizes the code following BUG() as unreachable, avoiding warnings that would otherwise appear (such as on non-void functions that don't return a value after BUG()). In addition to saving a few bytes over the generic infinite-loop implementation, this implementation traps rather than looping, which potentially allows for better error-recovery behavior (such as by rebooting). Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07ppc: make PPC_BOOK3S_64 select IRQ_WORKJosh Triplett1-0/+1
Fix breakage which will be exposed by the patch "kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT". arch/powerpc/kernel/mce.c, compiled in for PPC_BOOK3S_64, calls functions only built when IRQ_WORK, so select it. Fixes the following build error: arch/powerpc/kernel/built-in.o: In function `.machine_check_queue_event': (.text+0x11260): undefined reference to `.irq_work_queue' Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07ia64: select CONFIG_TTY for use of tty_write_message in unalignedJosh Triplett1-0/+1
Fix breakage which will be exposed by the patch "kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT". arch/ia64/kernel/unaligned.c uses tty_write_message to print an unaligned access exception to the TTY of the current user process. Enable TTY to prevent a build error. Minimal fix, on the basis that few people on ia64 will care deeply about kernel size enough to turn off TTY. Ideally, I'd instead suggest dropping the tty_write_message entirely, and just leaving the printk. Bonus: no need to sprintf first. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07cris: cpuinfo_op should depend on CONFIG_PROC_FSGeert Uytterhoeven1-0/+2
Fix breakage which will be exposed by the patch "kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT". Now allnoconfig started disabling CONFIG_PROC_FS: arch/cris/kernel/built-in.o:(.rodata+0xc): undefined reference to `show_cpuinfo' make: *** [vmlinux] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07cris: make ETRAX_ARCH_V10 select TTY for use in debugportJosh Triplett1-0/+1
Fix breakage which will be exposed by the patch "kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT". arch/cris/arch-v10/kernel/debugport.c, compiled in unconditionally with ETRAX_ARCH_V10, requires TTY, so select TTY to avoid a build failure. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07rapidio: rework device hierarchy and introduce mport class of devicesAlexandre Bounine1-0/+1
This patch removes an artificial RapidIO bus root device and establishes actual device hierarchy by providing reference to real parent devices. It also introduces device class for RapidIO controller devices (on-chip or an eternal bridge, known as "mport"). Existing implementation was sufficient for SoC-based platforms that have a single RapidIO controller. With introduction of devices using multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme is very limiting or does not work at all. The implemented changes allow to properly reference platform's local RapidIO mport devices and provide device details needed for upper layers. This change to RapidIO device hierarchy does not break any known existing kernel or user space interfaces. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com> Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07include/linux/crash_dump.h: add vmcore_cleanup() prototypeRashika Kheria1-1/+0
Eliminate the following warning in proc/vmcore.c: fs/proc/vmcore.c:1088:6: warning: no previous prototype for `vmcore_cleanup' [-Wmissing-prototypes] [akpm@linux-foundation.org: clean up powerpc, remove unneeded EXPORT_SYMBOL] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm: per-thread vma cachingDavidlohr Bueso1-1/+3
This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm: revert "thp: make MADV_HUGEPAGE check for mm->def_flags"Alex Thorlton1-0/+3
The main motivation behind this patch is to provide a way to disable THP for jobs where the code cannot be modified, and using a malloc hook with madvise is not an option (i.e. statically allocated data). This patch allows us to do just that, without affecting other jobs running on the system. We need to do this sort of thing for jobs where THP hurts performance, due to the possibility of increased remote memory accesses that can be created by situations such as the following: When you touch 1 byte of an untouched, contiguous 2MB chunk, a THP will be handed out, and the THP will be stuck on whatever node the chunk was originally referenced from. If many remote nodes need to do work on that same chunk, they'll be making remote accesses. With THP disabled, 4K pages can be handed out to separate nodes as they're needed, greatly reducing the amount of remote accesses to memory. This patch is based on some of my work combined with some suggestions/patches given by Oleg Nesterov. The main goal here is to add a prctl switch to allow us to disable to THP on a per mm_struct basis. Here's a bit of test data with the new patch in place... First with the flag unset: # perf stat -a ./prctl_wrapper_mmv3 0 ./thp_pthread -C 0 -m 0 -c 512 -b 256g Setting thp_disabled for this task... thp_disable: 0 Set thp_disabled state to 0 Process pid = 18027 PF/ MAX MIN TOTCPU/ TOT_PF/ TOT_PF/ WSEC/ TYPE: CPUS WALL WALL SYS USER TOTCPU CPU WALL_SEC SYS_SEC CPU NODES 512 1.120 0.060 0.000 0.110 0.110 0.000 28571428864 -9223372036854775808 55803572 23 Performance counter stats for './prctl_wrapper_mmv3_hack 0 ./thp_pthread -C 0 -m 0 -c 512 -b 256g': 273719072.841402 task-clock # 641.026 CPUs utilized [100.00%] 1,008,986 context-switches # 0.000 M/sec [100.00%] 7,717 CPU-migrations # 0.000 M/sec [100.00%] 1,698,932 page-faults # 0.000 M/sec 355,222,544,890,379 cycles # 1.298 GHz [100.00%] 536,445,412,234,588 stalled-cycles-frontend # 151.02% frontend cycles idle [100.00%] 409,110,531,310,223 stalled-cycles-backend # 115.17% backend cycles idle [100.00%] 148,286,797,266,411 instructions # 0.42 insns per cycle # 3.62 stalled cycles per insn [100.00%] 27,061,793,159,503 branches # 98.867 M/sec [100.00%] 1,188,655,196 branch-misses # 0.00% of all branches 427.001706337 seconds time elapsed Now with the flag set: # perf stat -a ./prctl_wrapper_mmv3 1 ./thp_pthread -C 0 -m 0 -c 512 -b 256g Setting thp_disabled for this task... thp_disable: 1 Set thp_disabled state to 1 Process pid = 144957 PF/ MAX MIN TOTCPU/ TOT_PF/ TOT_PF/ WSEC/ TYPE: CPUS WALL WALL SYS USER TOTCPU CPU WALL_SEC SYS_SEC CPU NODES 512 0.620 0.260 0.250 0.320 0.570 0.001 51612901376 128000000000 100806448 23 Performance counter stats for './prctl_wrapper_mmv3_hack 1 ./thp_pthread -C 0 -m 0 -c 512 -b 256g': 138789390.540183 task-clock # 641.959 CPUs utilized [100.00%] 534,205 context-switches # 0.000 M/sec [100.00%] 4,595 CPU-migrations # 0.000 M/sec [100.00%] 63,133,119 page-faults # 0.000 M/sec 147,977,747,269,768 cycles # 1.066 GHz [100.00%] 200,524,196,493,108 stalled-cycles-frontend # 135.51% frontend cycles idle [100.00%] 105,175,163,716,388 stalled-cycles-backend # 71.07% backend cycles idle [100.00%] 180,916,213,503,160 instructions # 1.22 insns per cycle # 1.11 stalled cycles per insn [100.00%] 26,999,511,005,868 branches # 194.536 M/sec [100.00%] 714,066,351 branch-misses # 0.00% of all branches 216.196778807 seconds time elapsed As with previous versions of the patch, We're getting about a 2x performance increase here. Here's a link to the test case I used, along with the little wrapper to activate the flag: http://oss.sgi.com/projects/memtests/thp_pthread_mmprctlv3.tar.gz This patch (of 3): Revert commit 8e72033f2a48 and add in code to fix up any issues caused by the revert. The revert is necessary because hugepage_madvise would return -EINVAL when VM_NOHUGEPAGE is set, which will break subsequent chunks of this patch set. Here's a snip of an e-mail from Gerald detailing the original purpose of this code, and providing justification for the revert: "The intent of commit 8e72033f2a48 was to guard against any future programming errors that may result in an madvice(MADV_HUGEPAGE) on guest mappings, which would crash the kernel. Martin suggested adding the bit to arch/s390/mm/pgtable.c, if 8e72033f2a48 was to be reverted, because that check will also prevent a kernel crash in the case described above, it will now send a SIGSEGV instead. This would now also allow to do the madvise on other parts, if needed, so it is a more flexible approach. One could also say that it would have been better to do it this way right from the beginning..." Signed-off-by: Alex Thorlton <athorlton@sgi.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds26-70/+158
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-07Merge tag 'fbdev-omap-3.15' of ↵Linus Torvalds20-252/+997
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP fbdev changes from Tomi Valkeinen: "This is based on the already pulled fbdev-main changes, and this also merges .dts branch from Tony Lindgren (which has also been pulled), so that I was able to add the display related .dts changes. This contains OMAP related fbdev changes for 3.15. The bulk of the patches are for adding Device Tree support for OMAP Display Subsystem: - SoCs: OMAP2/3/4 - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3 IGEP0020, OMAP3 N900 - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors" * tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits) OMAPDSS: HDMI: fix interlace output OMAPDSS: add missing __init for dss_init_ports ARM: OMAP2+: remove pdata quirks for displays OMAPDSS: remove DT hacks for regulators Doc/DT: Add DT binding documentation for tpd12s015 encoder Doc/DT: Add DT binding documentation for TFP410 encoder Doc/DT: Add DT binding documentation for Sony acx565akm panel Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Doc/DT: Add DT binding documentation for HDMI Connector Doc/DT: Add DT binding documentation for DVI Connector Doc/DT: Add DT binding documentation for Analog TV Connector ARM: omap3-n900.dts: add display information ARM: omap3-igep0020.dts: add display information ARM: omap3-beagle-xm.dts: add display information ARM: omap3-beagle.dts: add display information ARM: omap4-sdp.dts: add display information Doc/DT: Add DT binding documentation for OMAP DSS OMAPDSS: acx565akm: Add DT support OMAPDSS: connector-analog-tv: Add DT support OMAPDSS: hdmi-connector: Add DT support ...
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds4-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-07arm64: Add missing Kconfig for CONFIG_STRICT_DEVMEMLaura Abbott1-0/+14
The Kconfig for CONFIG_STRICT_DEVMEM is missing despite being used in mmap.c. Add it. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-07ARM: 8009/1: dcscb.c: remove call to outer_flush_all()Nicolas Pitre1-4/+9
Strictly speaking this call is a no-op on the platform where dcscb.c is used since it only has architected caches. The call was there as a hint to people inspired by this code when writing their own backend, but the hint might not always be correct. For example, if a PL310 were to be used it wouldn't be safe to call the regular outer_flush_all() as atomic instructions for locking are involved in that case and those instructions cannot be assumed to still be operational after v7_exit_coherency_flush() has returned. Given no other CPUs (in the cluster) should be running at that point then standard concurrency concerns wouldn't apply. So let's simply kill this call for now and enhance the existing comment. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-07cpufreq: create another field .flags in cpufreq_frequency_tableViresh Kumar1-10/+10
Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: powernv: Select CPUFreq related Kconfig options for powernvGautham R. Shenoy3-0/+8
Enable CPUFreq for PowerNV. Select "performance", "powersave", "userspace" and "ondemand" governors. Choose "ondemand" to be the default governor. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: powernv: cpufreq driver for powernv platformVaidyanathan Srinivasan1-0/+4
Backend driver to dynamically set voltage and frequency on IBM POWER non-virtualized platforms. Power management SPRs are used to set the required PState. This driver works in conjunction with cpufreq governors like 'ondemand' to provide a demand based frequency and voltage setting on IBM POWER non-virtualized platforms. PState table is obtained from OPAL v3 firmware through device tree. powernv_cpufreq back-end driver would parse the relevant device-tree nodes and initialise the cpufreq subsystem on powernv platform. The code was originally written by svaidy@linux.vnet.ibm.com. Over time it was modified to accomodate bug-fixes as well as updates to the the cpu-freq core. Relevant portions of the change logs corresponding to those modifications are noted below: * The policy->cpus needs to be populated in a hotplug-invariant manner instead of using cpu_sibling_mask() which varies with cpu-hotplug. This is because the cpufreq core code copies this content into policy->related_cpus mask which should not vary on cpu-hotplug. [Authored by srivatsa.bhat@linux.vnet.ibm.com] * Create a helper routine that can return the cpu-frequency for the corresponding pstate_id. Also, cache the values of the pstate_max, pstate_min and pstate_nominal and nr_pstates in a static structure so that they can be reused in the future to perform any validations. [Authored by ego@linux.vnet.ibm.com] * Create a driver attribute named cpuinfo_nominal_freq which creates a sysfs read-only file named cpuinfo_nominal_freq. Export the frequency corresponding to the nominal_pstate through this interface. Nominal frequency is the highest non-turbo frequency for the platform. This is generally used for setting governor policies from user space for optimal energy efficiency. [Authored by ego@linux.vnet.ibm.com] * Implement a powernv_cpufreq_get(unsigned int cpu) method which will return the current operating frequency. Export this via the sysfs interface cpuinfo_cur_freq by setting powernv_cpufreq_driver.get to powernv_cpufreq_get(). [Authored by ego@linux.vnet.ibm.com] [Change log updated by ego@linux.vnet.ibm.com] Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07microblaze: Use asm-generic/io.hMichal Simek5-294/+19
Using generic io.h will narrow down code duplication in architecture io.h. - define PCI_IOBASE - remove non existing pci_io_base extern Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Remove platform folderMichal Simek6-8/+2
There is no reason to use platform folder structure now. Everything is OF driven. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Remove generic platformMichal Simek4-80/+40
All microblaze platforms are using the same configuration that's why there is no reason to use generic platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Sort Kconfig optionsMichal Simek1-26/+26
Kconfig options should be sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Move DTS file to common location at boot/dts folderMichal Simek2-367/+366
Preparation step for arch/microblaze/platform/ cleanup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Fix compilation failure because of release_threadMichal Simek1-1/+1
Warning log: In file included from arch/microblaze/include/asm/thread_info.h:21:0, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/microblaze/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/spinlock.h:50, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/sysfs.h:20, from include/linux/kobject.h:21, from include/linux/device.h:17, from include/linux/node.h:17, from include/linux/cpu.h:16, from arch/microblaze/kernel/process.c:11: arch/microblaze/include/asm/processor.h:125:20: warning: no previous prototype for 'release_thread' [-Wmissing-prototypes] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Fix sparse warning because of missing cpu.h headerMichal Simek1-0/+1
Warning: arch/microblaze/kernel/process.c:164:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07ARM: 8014/1: mm: fix reporting of read-only PMD bitsKees Cook1-15/+32
On non-LPAE ARMv6+, read-only PMD bits are defined with the combination "PMD_SECT_APX | PMD_SECT_AP_WRITE". Adjusted the bit masks to correctly report this. Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 23:37:45 +0000