summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2012-04-17net: filter: remove unused cpu_off in sparc JITEric Dumazet1-2/+0
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17net: filter: Fix some more small issues in sparc JIT.David S. Miller3-44/+84
Fix mixed space and tabs. Put bpf_jit_load_*[] externs into bpf_jit.h "while(0)" --> "while (0)" "COND (X)" --> "COND(X)" Document branch offset calculations, and bpf_error's return sequence. Document the reason we need to emit three nops between the %y register write and the divide instruction. Remove erroneous trailing semicolons from emit_read_y() and emit_write_y(). Based upon feedback from Sam Ravnborg. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17net: filter: Fix some minor issues in sparc JIT.David S. Miller3-5/+6
Correct conventions comments. %o4 and %o5 were swapped, %g3 was not documented. Use r_TMP instead of r_SKB_DATA + r_OFF where possible in assembler stubs. Correct discussion of %o4 and %o5 in one of bpf_jit_compile()'s comments. Based upon feedback from Richard Mortimer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16net: filter: Just In Time compiler for sparcDavid S. Miller6-0/+1042
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller88-714/+832
2012-04-12Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds8-30/+4
Pull irqdomain bug fixes from Grant Likely: "This branch fixes a bug in irq_create_mapping() where an error return from irq_alloc_desc_from() gets ignored. It also removes irq_virq_count to fix a bug on powerpc where the irqdomain code does not find irqs allocated above the CONFIG_NR_IRQS boundary. The remaining patches get rid of an completely pointless export and fix some minor bugs in the irqdomain debug output." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irq_domain: Move irq_virq_count into NOMAP revmap irqdomain: Fix debugfs formatting irq_domain: correct the debugfs file name irq: Kill pointless irqd_to_hw export irq/irq_domain: Quit ignoring error returns from irq_alloc_desc_from().
2012-04-12irq_domain: Move irq_virq_count into NOMAP revmapGrant Likely4-5/+4
This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com>
2012-04-11Merge branch 'merge' of ↵Linus Torvalds2-20/+23
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Fixes for two nasty regression affecting powerpc in 3.4." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix typo in runlatch code powerpc: Fix page fault with lockdep regression
2012-04-11Merge branch 'stable' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fixes from Chris Metcalf: "This is one important change from Srivatsa Bhat that got dropped when I put together my pull request for -rc2, plus a trivial change to remove a compiler warning." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: avoid unused variable warning in proc.c for tilegx tile/CPU hotplug: Add missing call to notify_cpu_starting()
2012-04-11arch/tile: avoid unused variable warning in proc.c for tilegxChris Metcalf1-3/+1
Until we push the unaligned access support for tilegx, it's silly to have arch/tile/kernel/proc.c generate a warning about an unused variable. Extend the #ifdef to cover all the code and data for now. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-11x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it upLinus Torvalds6-145/+105
This merges the 32- and 64-bit versions of the x86 strncpy_from_user() by just rewriting it in C rather than the ancient inline asm versions that used lodsb/stosb and had been duplicated for (trivial) differences between the 32-bit and 64-bit versions. While doing that, it also speeds them up by doing the accesses a word at a time. Finally, the new routines also properly handle the case of hitting the end of the address space, which we have never done correctly before (fs/namei.c has a hack around it for that reason). Despite all these improvements, it actually removes more lines than it adds, due to the de-duplication. Also, we no longer export (or define) the legacy __strncpy_from_user() function (that was defined to not do the user permission checks), since it's not actually used anywhere, and the user address space checks are built in to the new code. Other architecture maintainers have been notified that the old hack in fs/namei.c will be going away in the 3.5 merge window, in case they copied the x86 approach of being a bit cavalier about the end of the address space. Cc: linux-arch@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin" <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-10irq: Kill pointless irqd_to_hw exportGrant Likely4-25/+0
It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-11powerpc: Fix typo in runlatch codeBenjamin Herrenschmidt1-2/+2
Commit fe1952fc0afb9a2e4c79f103c08aef5d13db1873 "powerpc: Rework runlatch code" has a nasty typo where it uses "TLF_RUNLATCH" instead of "_TLF_RUNLATCH" (bit number instead of bit mask), causing some flags to be potentially lost such as _TLF_RESTORE_SIGMASK (Brown paper bag for me ! We should be able to make that break at compile time with a bit of magic, any volunteer ?) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2023-21153/+29661
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds3-27/+60
Pull sparc fixes from David Miller: 1) Build fix for LEON, from Sam Ravnborg. 2) Make the sparc side changes that go along with the infrastructure to retry faults when blocking on a disk transfer. From Kautuk Consul. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32,leon: fix leon build sparc/mm/fault_32.c: Port OOM changes to do_sparc_fault sparc/mm/fault_64.c: Port OOM changes to do_sparc64_fault
2012-04-10powerpc: Fix page fault with lockdep regressionBenjamin Herrenschmidt1-18/+21
commit a546498f3bf9aac311c66f965186373aee2ca0b0 introduced a regression on 32-bit when irq tracing is enabled by exposing an old bug in our irq tracing code for exception entry. The code would save and restore some GPRs around the calls to the C lockdep code, however, it tries to be too smart for its own good and restores some of the GPRs from the exception frame (as saved there on exception entry). However, for page faults, we do replace those GPRs with arguments to do_page_fault before we call transfer_to_handler and so restoring from the exception frame is plain wrong in this case. This was fine as long as we didn't touch the interrupt state when taking page fault, but when I started doing it, it would trigger the lockdep calls and the bug. This fixes it by cleaning up that code a bit. It did create a small stack frame for the sake of backtraces, so let's make it a bit bigger and use it to save and restore the stuff we care about. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-10um: uml_setup_stubs': warning: unused variable 'pages'Boaz Harrosh1-1/+0
Fix the following gcc complain arch/um/kernel/skas/mmu.c: In function 'uml_setup_stubs': arch/um/kernel/skas/mmu.c:106:16: warning: unused variable 'pages' [-Wunused-variable] Signed-Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-04-10um: Use asm-generic/switch_to.hRichard Weinberger3-12/+2
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-04-10um: Disintegrate asm/system.hRichard Weinberger5-136/+84
Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: Toralf Förster <toralf.foerster@gmx.de> CC: dhowells@redhat.com
2012-04-10um: switch cow_user.h to htobe{32,64}/betoh{32,64}Al Viro2-57/+21
... rather than open-coding the 64bit versions. endian.h has those guys. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-04-09tile/CPU hotplug: Add missing call to notify_cpu_starting()Srivatsa S. Bhat1-0/+2
The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-09um: fix linker script generationAl Viro2-3/+7
while we can't just use -U$(SUBARCH), we still need to kill idiotic define (implicit -Di386=1), both for SUBARCH=i386 and SUBARCH=x86/CONFIG_64BIT=n builds. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-07Merge branch 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-12/+36
Pull a few KVM fixes from Avi Kivity: "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated), and a small build fix." * 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Resolve RCU vs. async page fault problem KVM: VMX: vmx_set_cr0 expects kvm->srcu locked KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr() KVM: PPC: Book3S: PR: Fix preemption KVM: PPC: Save/Restore CR over vcpu_run KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code
2012-04-07Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds18-16/+61
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver serial: sh-sci: use serial_port_in/out vs sci_in/out. sh: vsyscall: Fix up .eh_frame generation. sh: dma: Fix up device attribute mismatch from sysdev fallout. sh: dwarf unwinder depends on SHcompact. sh: fix up fallout from system.h disintegration.
2012-04-06Merge branch 'stable' of ↵Linus Torvalds29-257/+429
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bug fixes from Chris Metcalf: "This includes Paul Gortmaker's change to fix the <asm/system.h> disintegration issues on tile, a fix to unbreak the tilepro ethernet driver, and a backlog of bugfix-only changes from internal Tilera development over the last few months. They have all been to LKML and on linux-next for the last few days. The EDAC change to MAINTAINERS is an oddity but discussion on the linux-edac list suggested I ask you to pull that change through my tree since they don't have a tree to pull edac changes from at the moment." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits) drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing MAINTAINERS: update EDAC information tilepro ethernet driver: fix a few minor issues tile-srom.c driver: minor code cleanup edac: say "TILEGx" not "TILEPro" for the tilegx edac driver arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally arch/tile: remove bogus performance optimization arch/tile: return SIGBUS for addresses that are unaligned AND invalid arch/tile: fix finv_buffer_remote() for tilegx arch/tile: use atomic exchange in arch_write_unlock() arch/tile: stop mentioning the "kvm" subdirectory arch/tile: export the page_home() function. arch/tile: fix pointer cast in cacheflush.c arch/tile: fix single-stepping over swint1 instructions on tilegx arch/tile: implement panic_smp_self_stop() arch/tile: add "nop" after "nap" to help GX idle power draw arch/tile: use proper memparse() for "maxmem" options arch/tile: fix up locking in pgtable.c slightly arch/tile: don't leak kernel memory when we unload modules arch/tile: fix bug in delay_backoff() ...
2012-04-06Merge tag 'stable/for-linus-3.4-rc1-tag' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
2012-04-06Make the "word-at-a-time" helper functions more commonly usableLinus Torvalds1-0/+46
I have a new optimized x86 "strncpy_from_user()" that will use these same helper functions for all the same reasons the name lookup code uses them. This is preparation for that. This moves them into an architecture-specific header file. It's architecture-specific for two reasons: - some of the functions are likely to want architecture-specific implementations. Even if the current code happens to be "generic" in the sense that it should work on any little-endian machine, it's likely that the "multiply by a big constant and shift" implementation is less than optimal for an architecture that has a guaranteed fast bit count instruction, for example. - I expect that if architectures like sparc want to start playing around with this, we'll need to abstract out a few more details (in particular the actual unaligned accesses). So we're likely to have more architecture-specific stuff if non-x86 architectures start using this. (and if it turns out that non-x86 architectures don't start using this, then having it in an architecture-specific header is still the right thing to do, of course) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-48/+115
Pull networking updates from David Miller: 1) Fix inaccuracies in network driver interface documentation, from Ben Hutchings. 2) Fix handling of negative offsets in BPF JITs, from Jan Seiffert. 3) Compile warning, locking, and refcounting fixes in netfilter's xt_CT, from Pablo Neira Ayuso. 4) phonet sendmsg needs to validate user length just like any other datagram protocol, fix from Sasha Levin. 5) Ipv6 multicast code uses wrong loop index, from RongQing Li. 6) Link handling and firmware fixes in bnx2x driver from Yaniv Rosner and Yuval Mintz. 7) mlx4 erroneously allocates 4 pages at a time, regardless of page size, fix from Thadeu Lima de Souza Cascardo. 8) SCTP socket option wasn't extended in a backwards compatible way, fix from Thomas Graf. 9) Add missing address change event emissions to bonding, from Shlomo Pongratz. 10) /proc/net/dev regressed because it uses a private offset to track where we are in the hash table, but this doesn't track the offset pullback that the seq_file code does resulting in some entries being missed in large dumps. Fix from Eric Dumazet. 11) do_tcp_sendpage() unloads the send queue way too fast, because it invokes tcp_push() when it shouldn't. Let the natural sequence generated by the splice paths, and the assosciated MSG_MORE settings, guide the tcp_push() calls. Otherwise what goes out of TCP is spaghetti and doesn't batch effectively into GSO/TSO clusters. From Eric Dumazet. 12) Once we put a SKB into either the netlink receiver's queue or a socket error queue, it can be consumed and freed up, therefore we cannot touch it after queueing it like that. Fixes from Eric Dumazet. 13) PPP has this annoying behavior in that for every transmit call it immediately stops the TX queue, then calls down into the next layer to transmit the PPP frame. But if that next layer can take it immediately, it just un-stops the TX queue right before returning from the transmit method. Besides being useless work, it makes several facilities unusable, in particular things like the equalizers. Well behaved devices should only stop the TX queue when they really are full, and in PPP's case when it gets backlogged to the downstream device. David Woodhouse therefore fixed PPP to not stop the TX queue until it's downstream can't take data any more. 14) IFF_UNICAST_FLT got accidently lost in some recent stmmac driver changes, re-add. From Marc Kleine-Budde. 15) Fix link flaps in ixgbe, from Eric W. Multanen. 16) Descriptor writeback fixes in e1000e from Matthew Vick. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) net: fix a race in sock_queue_err_skb() netlink: fix races after skb queueing doc, net: Update ndo_start_xmit return type and values doc, net: Remove instruction to set net_device::trans_start doc, net: Update netdev operation names doc, net: Update documentation of synchronisation for TX multiqueue doc, net: Remove obsolete reference to dev->poll ethtool: Remove exception to the requirement of holding RTNL lock MAINTAINERS: update for Marvell Ethernet drivers bonding: properly unset current_arp_slave on slave link up phonet: Check input from user before allocating tcp: tcp_sendpages() should call tcp_push() once ipv6: fix array index in ip6_mc_add_src() mlx4: allocate just enough pages instead of always 4 pages stmmac: re-add IFF_UNICAST_FLT for dwmac1000 bnx2x: Clear MDC/MDIO warning message bnx2x: Fix BCM57711+BCM84823 link issue bnx2x: Clear BCM84833 LED after fan failure bnx2x: Fix BCM84833 PHY FW version presentation bnx2x: Fix link issue for BCM8727 boards. ...
2012-04-06xen/smp: Remove unnecessary call to smp_processor_id()Srivatsa S. Bhat1-1/+1
There is an extra and unnecessary call to smp_processor_id() in cpu_bringup(). Remove it. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-06xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus ↵Konrad Rzeszutek Wilk1-1/+3
io-apic entries' The above mentioned patch checks the IOAPIC and if it contains -1, then it unmaps said IOAPIC. But under Xen we get this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 PGD 0 Oops: 0002 [#1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron 1525 /0U990C RIP: e030:[<ffffffff8134e51f>] [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 RSP: e02b: ffff8800d42cbb70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001 RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001 RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0:000000008005003b CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000) Stack: 00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157 ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384 0000000000000002 0000000000000010 00000000ffffffff 0000000000000000 Call Trace: [<ffffffff8134f157>] xen_bind_pirq_gsi_to_irq+0x87/0x230 [<ffffffff8100a9b2>] ? check_events+0x12+0x20 [<ffffffff814bab42>] xen_register_pirq+0x82/0xe0 [<ffffffff814bac1a>] xen_register_gsi.part.2+0x4a/0xd0 [<ffffffff814bacc0>] acpi_register_gsi_xen+0x20/0x30 [<ffffffff8103036f>] acpi_register_gsi+0xf/0x20 [<ffffffff8131abdb>] acpi_pci_irq_enable+0x12e/0x202 [<ffffffff814bc849>] pcibios_enable_device+0x39/0x40 [<ffffffff812dc7ab>] do_pci_enable_device+0x4b/0x70 [<ffffffff812dc878>] __pci_enable_device_flags+0xa8/0xf0 [<ffffffff812dc8d3>] pci_enable_device+0x13/0x20 The reason we are dying is b/c the call acpi_get_override_irq() is used, which returns the polarity and trigger for the IRQs. That function calls mp_find_ioapics to get the 'struct ioapic' structure - which along with the mp_irq[x] is used to figure out the default values and the polarity/trigger overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt. The proper fix for this is going in v3.5 and adds an x86_io_apic_ops struct so that platforms can override it. But for v3.4 lets carry this work-around. This patch does that by providing a slightly different variant of the fake IOAPIC entries. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds65-230/+463
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes: from Olof Johansson: "A bunch of fixes for regressions (and a few other problems) in 3.4-rc1: - Fix for regression of mach/io.h cleanup on platforms with PCI or PCMCIA (adding back the include file on those for now) - AT91 fixes for usb and spi - smsc911x ethernet fixes for i.MX - smsc911x fixes for OMAP - gpio fixes for Tegra - A handful of build error and warning fixes for various platforms - cpufreq kconfig dependencies, build and lowlevel debug fixes for Samsung platforms In other words, more or less the regular collection of -rc1/2 type material. A few of them, in particular the smsc911x for OMAP series, aren't technically regressions for 3.4, but they're valid fixes and we're still relatively early in the rc cycle so it seems appropriate to include them." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: fix __io macro for PCMCIA ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() gpio: tegra: Iterate over the correct number of banks gpio: tegra: fix register address calculations for Tegra30 EXYNOS: fix dependency for EXYNOS_CPUFREQ ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change ...
2012-04-06blackfin: update defconfig for bf527-ezkitBob Liu1-0/+1
To fix compile error: drivers/usb/musb/blackfin.h:51:3: error: #error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1" make[4]: *** [drivers/usb/musb/blackfin.o] Error 1 Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-04-06blackfin: gpio: fix compile error if !CONFIG_GPIOLIBBob Liu1-2/+12
Add __gpio_get_value()/__gpio_set_value() to fix compile error if CONFIG_GPIOLIB = n. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-04-06blackfin: fix L1 data A overflow link issueMike Frysinger1-1/+1
This patch fix below compile error: "bfin-uclinux-ld: L1 data A overflow!" It is due to the recent lib/gen_crc32table.c change: 46c5801eaf86e83cb3a4142ad35188db5011fff0 crc32: bolt on crc32c it added 8KiB more data to __cacheline_aligned which cause blackfin L1 data cache overflow. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-04-05Merge tag 'omap-fixes-a2-for-3.4rc' of ↵Olof Johansson9-68/+105
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley: OMAP clock, powerdomain, clockdomain, and hwmod fixes intended for the early v3.4-rc series. Also contains an HSMMC integration refinement of an earlier hardware bug workaround. * tag 'omap-fixes-a2-for-3.4rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() ARM: OMAP AM3517/3505: clock data: change EMAC clocks aliases ARM: OMAP: clock: fix race in disable all clocks ARM: OMAP4: hwmod data: Add aliases for McBSP fclk clocks ARM: OMAP3xxx: clock data: fix DPLL4 CLKSEL masks ARM: OMAP3xxx: HSMMC: avoid erratum workaround when transceiver is attached ARM: OMAP44xx: clockdomain data: correct the emu_sys_clkdm CLKTRCTRL data
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds4-49/+15
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05C6X: use set_current_blocked() and block_sigmask()Matt Fleming1-13/+3
As described in e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05alpha: use set_current_blocked() and block_sigmask()Matt Fleming1-21/+10
As described in e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check for shared signals we're about to block. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd2-15/+2
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05ARM: fix __io macro for PCMCIARob Herring7-1/+93
With commit c334bc1 (ARM: make mach/io.h include optional), PCMCIA was broken. PCMCIA depends on __io() returning a valid i/o address, and most ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This needs a better fix with a fixed i/o address mapping, but for now we just restore things to the previous behavior. This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled, but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff, so it doesn't need an io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-05Merge branch 'v3.4-samsung-fixes-1' of ↵Olof Johansson5-8/+39
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: EXYNOS: use chip_id reg in uncompress to select uart base phys ARM: EXYNOS: fix CONFIG_DEBUG_LL ARM: S3C24XX: fix missing common.h in mach-s3c24xx/
2012-04-05Merge branch 'fixes' of ↵Olof Johansson17-122/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Note that this also contains a set of fixes that are not regressions or oopses to properly deal with the smsc911x regulator issue. Basically the regulators must be per board file as the regulators can also come from drivers, such as twl4030. So it's best to dumb down gpmc-smsc911x.c to not even care about the regulators. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: fix section mismatches in usb-host.c ARM: OMAP2+: Fix omap2+ build error ARM: OMAP2+: smsc911x: Add fixed board regulators ARM: OMAP2+: smsc911x: Remove regulator support from gmpc-smsc911x ARM: OMAP2+: smsc911x: Remove unused rate calculation ARM: OMAP2+ smsc911x: Fix possible stale smsc911x flags ARM: OMAP2+: smsc911x: Remove odd gpmc_cfg/board_data redirection ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler(v1) ARM: OMAP2+: OPP: allow OPP enumeration to continue if device is not present arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*() arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer. ARM: OMAP4: prm: fix interrupt register offsets ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK
2012-04-05Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson16-22/+45
* 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change USB: ohci-at91: change maximum number of ports USB: ohci-at91: rework and fix initialization ARM: at91/dts: USB host vbus is active low ARM: at91/USB host: specify and handle properly vbus_pin_active_low USB: ohci-at91: fix vbus_pin_active_low handling ARM: at91/at91sam9x5: add clkdev entries for DMA controllers
2012-04-05KVM: Resolve RCU vs. async page fault problemGleb Natapov1-0/+4
"Page ready" async PF can kick vcpu out of idle state much like IRQ. We need to tell RCU about this. Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-05Merge tag 'powerpc-fixes' of git://github.com/paulusmack/linux into new/masterAvi Kivity5-11/+29
Five fixes for bugs that have crept in to the powerpc KVM implementations. These are all small simple patches that only affect arch/powerpc/kvm. They come from the series that Alex Graf put together but which was too late for the 3.4 merge window. * tag 'powerpc-fixes' of git://github.com/paulusmack/linux: KVM: PPC: Book3S: PR: Fix preemption KVM: PPC: Save/Restore CR over vcpu_run KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-05KVM: VMX: vmx_set_cr0 expects kvm->srcu lockedMarcelo Tosatti1-0/+2
vmx_set_cr0 is called from vcpu run context, therefore it expects kvm->srcu to be held (for setting up the real-mode TSS). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-05KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr()Sasikantha babu1-1/+1
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-05ARM: EXYNOS: Fix compiler warning in dma.c fileSachin Kamat1-2/+0
Fixes the following warning: warning: 'dma_dmamask' defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-05ARM: EXYNOS: fix ISO C90 warningIl Han1-1/+2
ISO C90 forbids mixed declarations and code. Fix it. Signed-off-by: Il Han <corone.il.han@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-05Merge branches 'clock_fixes_3.4rc', 'clockdomain_fixes_3.4rc', ↵Paul Walmsley6-58/+87
'hsmmc_erratum_2_1_1_128_refine_3.4rc1', 'hwmod_data_fixes_a_3.4rc', 'hwmod_fixes_a2_3.4rc' and 'powerdomain_fixes_a_3.4rc' into omap-fixes-a2-for-3.4rc-branch