Age | Commit message (Collapse) | Author | Files | Lines |
|
omap-for-v3.8/cleanup-headers
Conflicts:
arch/arm/mach-omap1/clock.c
arch/arm/mach-omap2/board-2430sdp.c
arch/arm/mach-omap2/board-4430sdp.c
arch/arm/mach-omap2/board-cm-t35.c
arch/arm/mach-omap2/board-igep0020.c
arch/arm/mach-omap2/board-ldp.c
arch/arm/mach-omap2/board-omap3beagle.c
arch/arm/mach-omap2/board-omap3logic.c
arch/arm/mach-omap2/board-omap4panda.c
arch/arm/mach-omap2/board-overo.c
arch/arm/mach-omap2/board-rm680.c
arch/arm/mach-omap2/board-rx51.c
arch/arm/mach-omap2/twl-common.c
arch/arm/mach-omap2/usb-host.c
arch/arm/mach-omap2/usb-musb.c
|
|
In order to make single zImage work for ARM architecture,
we need to make sure we don't depend on private headers.
Move USB platform_data to <linux/platform_data/omap-usb.h>
and add a minimal drivers/mfd/usb-omap.h.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Partha Basak <parthab@india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated for local mfd/usb-omap.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Let's move what we can from plat/usb.h to the local usb.h
for ARM common zImage support.
This is needed so we can remove plat/usb.h for ARM common
zImage support.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Partha Basak <parthab@india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
For omap1, we'll keep mach/serial.h around for 8250.c hardware
workarounds. For omap2+, we no longer need mach/serial.h and
can make it local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This allows us to eventually move omap2+ to generic
debug code that's configured in Kconfig for the port.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
omap-for-v3.8/cleanup-headers-serial-take2
This is the first set of omap cleanup patches for v3.8 merge
window to remove most of the remaining plat includes to get us
closer to ARM common zImage support.
To avoid a huge amount of trivial merge conflicts with includes,
this branch is based on several small topic branches coordinated
with the driver subsystem maintainers. These branches are based on
v3.7-rc1 and can also be merged into the related driver subsystem
branches as needed:
omap-for-v3.8/cleanup-headers-prepare few trivial driver changes
omap-for-v3.8/cleanup-headers-dma move of the DMA header
omap-for-v3.8/cleanup-headers-gpmc GPMC and MTD changes
omap-for-v3.8/cleanup-headers-mmc MMC related changes
omap-for-v3.8/cleanup-headers-dss DSS related changes
omap-for-v3.8/cleanup-headers-asoc ASoC related changes
Note that for the dma-omap.h, it was decided that it should be
is completed. For the related discussion, please see:
https://patchwork.kernel.org/patch/1519591/#
After these patches we still have a few plat headers remaining
that will be handled in later pull requests.
|
|
This allows us to get rid of the ifdefs in 8250.c.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 fixes from Catalin Marinas:
"Main changes:
- AArch64 Linux compilation fixes following 3.7-rc1 changes
(MODULES_USE_ELF_RELA, update_vsyscall() prototype)
- Unnecessary register setting in start_thread() (thanks to Al Viro)
- ptrace fixes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: fix alignment padding in assembly code
arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints
arm64: ptrace: make structure padding explicit for debug registers
arm64: No need to set the x0-x2 registers in start_thread()
arm64: Ignore memory blocks below PHYS_OFFSET
arm64: Fix the update_vsyscall() prototype
arm64: Select MODULES_USE_ELF_RELA
arm64: Remove duplicate inclusion of mmu_context.h in smp.c
|
|
An interesting effect of using the generic version of linkage.h
is that the padding is defined in terms of x86 NOPs, which can have
even more interesting effects when the assembly code looks like this:
ENTRY(func1)
mov x0, xzr
ENDPROC(func1)
// fall through
ENTRY(func2)
mov x0, #1
ret
ENDPROC(func2)
Admittedly, the code is not very nice. But having code from another
architecture doesn't look completely sane either.
The fix is to add arm64's version of linkage.h, which causes the insertion
of proper AArch64 NOPs.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Assorted small fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf python: Properly link with libtraceevent
perf hists browser: Add back callchain folding symbol
perf tools: Fix build on sparc.
perf python: Link with libtraceevent
perf python: Initialize 'page_size' variable
tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter
lib tools traceevent: Add back pevent assignment in __pevent_parse_format()
perf hists browser: Fix off-by-two bug on the first column
perf tools: Remove warnings on JIT samples for srcline sort key
perf tools: Fix segfault when using srcline sort key
perf: Require exclude_guest to use PEBS - kernel side enforcement
perf tool: Precise mode requires exclude_guest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* The python binding needs to link with libtraceevent and to initialize
the 'page_size' variable so that mmaping works again.
* The callchain folding character that appears on the TUI just before
the overhead had disappeared due to recent changes, add it back.
* Intel PEBS in VT-x context uses the DS address as a guest linear address,
even though its programmed by the host as a host linear address. This either
results in guest memory corruption and or the hardware faulting and 'crashing'
the virtual machine. Therefore we have to disable PEBS on VT-x enter and
re-enable on VT-x exit, enforcing a strict exclude_guest.
Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.
* Fix build on sparc due to UAPI, fix from David Miller.
* Fixes for the srclike sort key for unresolved symbols and when processing
samples in JITted code, where we don't have an ELF file, just an special
symbol table, fixes from Namhyung Kim.
* Fix some leaks in libtraceevent, from Steven Rostedt.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc fixes from Olof Johansson:
"A set of fixes and some minor cleanups for -rc2:
- A series from Arnd that fixes warnings in drivers and other code
included by ARM defconfigs. Most have been acked by corresponding
maintainers (and seem quite hard to argue not picking up anyway in
the few exception cases).
- A few misc patches from the list for integrator/vt8500/i.MX
- A batch of fixes to OMAP platforms, fixing:
- boot problems on beaglebone,
- regression fixes for local timers
- clockdomain locking fixes
- a few boot/sparse warnings
- For Tegra:
- Clock rate calculation overflow fix
- Revert a change that removed timer clocks and a fix for symbol
name clashes
- For Renesas:
- IO accessor / annotation cleanups to remove warnings
- For Kirkwood/Dove/mvebu:
- Fixes for device trees for Dove (some minor cleanups, some fixes)
- Fixes for the mvebu gpio driver
- Fix build problem for Feroceon due to missing ifdefs
- Fix lsxl DTS files"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
ARM: kirkwood: fix buttons on lsxl boards
ARM: kirkwood: fix LEDs names for lsxl boards
ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type
ARM: dove: Add crypto engine to DT
ARM: dove: Remove watchdog from DT
ARM: dove: Restructure SoC device tree descriptor
ARM: dove: Fix clock names of sata and gbe
ARM: dove: Fix tauros2 device tree init
ARM: dove: Add pcie clock support
ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
ARM: s3c: mark s3c2440_clk_add as __init_refok
spi/s3c64xx: use correct dma_transfer_direction type
ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message
ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck
ARM: OMAP: resolve sparse warning concerning debug_card_init()
ARM: OMAP4: Fix twd_local_timer_register regression
ARM: tegra: add tegra_timer clock
ARM: tegra: rename tegra system timer
...
|
|
git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper:
- improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2
- lsxl board dts fixes
* tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux:
ARM: kirkwood: fix buttons on lsxl boards
ARM: kirkwood: fix LEDs names for lsxl boards
ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes
A collection of warning fixes on non-ARM code from Arnd Bergmann:
* 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: s3c: mark s3c2440_clk_add as __init_refok
spi/s3c64xx: use correct dma_transfer_direction type
pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit
mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN
SCSI: ARM: make fas216_dumpinfo function conditional
SCSI: ARM: ncr5380/oak uses no interrupts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull miscellaneous x86 fixes from Peter Anvin:
"The biggest ones are fixing suspend/resume breakage on 32 bits, and an
interrim fix for mapping over holes that allows AMD kit with more than
1 TB.
A final solution for the latter is in the works, but involves some
fairly invasive changes that will probably mean it will only be
appropriate for 3.8."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, MCE: Remove bios_cmci_threshold sysfs attribute
x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookup
x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
x86/cache_info: Use ARRAY_SIZE() in amd_l3_attrs()
x86/reboot: Remove quirk entry for SBC FITPC
x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
|
|
Pull Xtensa patchset from Chris Zankel:
"These are all limited to the xtensa subtree and include some important
changes (adding long missing system calls for newer libc versions and
other fixes) and the UAPI changes"
* tag 'xtensa-next-20121018' of git://github.com/czankel/xtensa-linux:
xtensa: add missing system calls to the syscall table
xtensa: minor compiler warning fix
xtensa: Use Kbuild infrastructure to handle asm-generic headers
UAPI: (Scripted) Disintegrate arch/xtensa/include/asm
xtensa: fix unaligned usermode access
xtensa: reorganize SR referencing
xtensa: fix boot parameters parsing
xtensa: fix missing return in do_page_fault for SIGBUS case
xtensa: copy_thread with CLONE_VM must not copy live parent AR windows
xtensa: fix memmove(), bcopy(), and memcpy().
xtensa: ISS: fix rs_put_char
xtensa: ISS: fix specific simcalls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel
Pull hexagon updates from Richard Kuo:
"It includes the Hexagon UAPI changes from David Howells and some CR
marking changes for the transition from Code Aurora to Linux
Foundation."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
Hexagon: Copyright marking changes
UAPI: (Scripted) Disintegrate arch/hexagon/include/asm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Pull PARISC changes from James Bottomley:
"This is a couple of high code motion patches (all within arch/parisc)
I'd like to apply at -rc1 to avoid conflicts with anything else. One
moves us on to the generated instead of included asm file model and
the other is a pull request from David Howells for UAPI
disintegration.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
* tag 'parisc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
UAPI: (Scripted) Disintegrate arch/parisc/include/asm
[PARISC] asm: redo generic includes
|
|
Add the following system calls to the syscall table:
fallocate
sendmmsg
umount2
syncfs
epoll_create1
inotify_init1
signalfd4
dup3
pipe2
timerfd_create
timerfd_settime
timerfd_gettime
eventfd2
preadv
pwritev
fanotify_init
fanotify_mark
process_vm_readv
process_vm_writev
name_to_handle_at
open_by_handle_at
sync_file_range
perf_event_open
rt_tgsigqueueinfo
clock_adjtime
prlimit64
kcmp
Note that we have to use the 'sys_sync_file_range2' version, so that
the 64-bit arguments are aligned correctly to the argument registers.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Fix two compiler warnings complaining about truncating a value on
a 64-bit host, and about declaring an unused variable that is only
used for a specific configuration.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
From Borislav Petkov <bp@amd64.org>:
Below is a RAS fix which reverts the addition of a sysfs attribute
which we agreed is not needed, post-factum. And this should go in now
because that sysfs attribute is going to end up in 3.7 otherwise and
thus exposed to userspace; removing it then would be a lot harder.
This is done as a merge rather than a simple patch/cherry-pick since
the baseline for this patch was not in the previous x86/urgent.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
450cc201038f3 ("x86/mce: Provide boot argument to honour bios-set CMCI
threshold") added the bios_cmci_threshold sysfs attribute which was
supposed to communicate to userspace tools that BIOS CMCI threshold has
been honoured.
However, this info is not of any importance to userspace - it should
rather get the actual error count it has been thresholded already from
MCi_STATUS[38:52].
So drop this before it becomes a used interface (good thing we caught
this early in 3.7-rc1, right after the merge window closed).
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20121017105940.GA14590@x1.osrc.amd.com
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
We want to remove plat/cpu.h. To do this, let's first split
it to private soc.h to mach-omap1 and mach-omap2. We have to
keep plat/cpu.h around until the remaining drivers are fixed,
so let's include the local soc.h in plat/cpu.h and for drivers
still including plat/cpu.h.
Once the drivers are fixed not to include plat/cpu.h, we
can remove the file.
This is needed for the ARM common zImage support.
[tony@atomide.com: updated to not print a warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
To facilitate the ARM single image work, split
arch/arm/plat-omap/include/plat/clkdev_omap.h into the
arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h files.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Remove arch/arm/plat-omap/include/plat/clock.h by merging it into
arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h.
The goal here is to facilitate ARM single image kernels by removing
includes via the "plat/" symlink.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
[tony@atomide.com: fixed to remove duplicate clock.h includes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Duplicate arch/arm/plat-omap/clock.c into arch/arm/mach-omap1/clock.c
and arch/arm/mach-omap2/clock.c. This is to support people who are working
on the ARM single image kernel and the OMAP common clock framework
conversion.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Moving plat/omap-secure.h locally to mach-omap2/
as part of single zImage work
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
omap_reserve() callback is defned only for mach-omap2.
So, moving definition of omap_reserve() to mach-omap2.
This helps is moving plat/omap_secure.h local to
mach-omap2
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
omap_reserve() is a stub for omap1. So dropping
omap_reserve callback from all OMAP1 board files.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We must move this for ARM common zImage support.
Note that neither drivers/media/rc/ir-rx51.c or
drivers/media/platform/omap3isp/ispvideo.c need
to include omap-pm.h, so this patch removes the
include for those files.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This is private to cpu.h and no other places should
need to include it and we can drop the include
in mach-omap2/io.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Let's make omap_hwmod local to mach-omap2 for
ARM common zImage support.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Code Aurora Forum (CAF) is becoming a part of Linux Foundation Labs.
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
aesni_enc()
Calling convention for internal functions and 'asmlinkage' functions is
different on x86-32. Therefore do not directly cast aesni_enc as XTS tweak
function, but use wrapper function in between. Fixes crash with "XTS +
aesni_intel + x86-32" combination.
Cc: stable@vger.kernel.org
Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a debugger tries to zero a hardware debug control register, the
kernel will try to infer both the type and length of the breakpoint
in order to sanity-check against the requested regset type. This will
fail because the encoding will appear as a zero-length breakpoint.
This patch changes the control register setting so that disabled
breakpoints are treated as HW_BREAKPOINT_EMPTY and no further
sanity-checking is required.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The user_hwdebug_state structure contains implicit padding to conform to
the alignment requirements of the AArch64 ABI (namely that aggregates
must be aligned to their most aligned member).
This patch fixes the ptrace functions operating on struct
user_hwdebug_state so that the padding is handled correctly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For historical reasons, ARM used to set r0-r2 in start_thread() to the
first values on the user stack when starting a new user application. The
same logic has been inherited in AArch64. The x0 register is overridden
by the sys_execve() return value so it's always zero on success. The x1
and x2 registers are ignored by AArch64 and EABI AArch32 applications,
so we can safely remove the register setting for both native and compat
user space.
This also fixes a potential fault with the kernel accessing user space
stack directly.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
According to Documentation/arm64/booting.txt, the kernel image must be
loaded at a pre-defined offset from the start of RAM so that the kernel
can calculate PHYS_OFFSET based on this address. If the DT contains
memory blocks below this PHYS_OFFSET, report them and ignore the
corresponding memory range.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With commit 576094b7 (time: Introduce new GENERIC_TIME_VSYSCALL) the old
update_vsyscall() prototype is no longer available. This patch updates
the arm64 port.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
|
|
With commit 786d35d4 (make most arch asm/module.h files use
asm-generic/module.h) arm64 needs to enable MODULES_USE_ELF_RELA for
loadable modules.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <Will.Deacon@arm.com>
|
|
Pull MIPS fixes from Ralf Baechle:
"Random small fixes across the MIPS code."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: CMP: Fix physical core number calculation logic
MIPS: JZ4740: Forward declare struct uart_port in header.
MIPS: JZ4740: Fix '#include guard' in serial.h
MIPS: hugetlbfs: Fix hazard between tlb write and pagemask restoration.
MIPS: Restore pagemask after dumping the TLB.
MIPS: Hugetlbfs: Handle huge pages correctly in pmd_bad()
MIPS: R5000: Fix TLB hazard handling.
MIPS: tlbex: Deal with re-definition of label
MIPS: Make __{,n,u}delay declarations match definitions and generic delay.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
"Here are a handful of powerpc related fixes."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
cpuidle/powerpc: Fix snooze state problem in the cpuidle design on pseries.
cpuidle/powerpc: Fix smt_snooze_delay functionality.
cpuidle/powerpc: Fix target residency initialisation in pseries cpuidle
powerpc: Build fix for powerpc KVM
Revert "powerpc/perf: Use pmc_overflow() to detect rolled back events"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Significant changes are:
- A regression fix for the new HD-audio LPIB delay counting,
VGA-switcheroo race fix
- ASoC ams-delta fix for the broken driver loading
Otherwise a collection of mostly small / trivial fixes."
* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: emu10k1: add chip details for E-mu 1010 PCIe card
ALSA: hda - Always check array bounds in alc_get_line_out_pfx
ASoC: bells: Correct typo in sub speaker DAI name for WM5110
ALSA: hda - Stop LPIB delay counting on broken hardware
ALSA: hda - Fix registration race of VGA switcheroo
ALSA: hda - Clean up superfluous position_fix list entries
ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()
ASoC: codecs: da9055: Minor improvement in ALC calibration process
ASoC: dmaengine: Correct Makefile when sound is built as module
ASoC: fsi: don't reschedule DMA from an atomic context
ASoC: fix documentation in soc-jack
ARM: pxa: Fix build error caused by sram.h rename
ASoC: wm2200: Fix non-inverted OUT2 mute control
ASoC: wm2200: Use rev A register patches on rev B
ASoC: bells: Correct typo in sub speaker DAI name for WM5110
ASoC: ams-delta: Convert to use snd_soc_register_card()
ASoC: omap-mcpdm: Remove OMAP revision check
ASoC: Fix wrong include for McPDM
ASoC: omap-abe-twl6040: Fix typo of Vibrator
ASoC: twl6040: Fix Stream DAPM mapping
|
|
Change event type to switch for the power and autopower switches.
Additionally, this patch aligns the keycodes with the other linkstation
boards already supported by linux.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
Don't use the specific board name in a the common device tree include file.
Instead use the common name 'lsxl'.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
Move the CACHE_FEROCEON_L2 test to kirkwood_l2_init, since linking
fails on the reference to feroceon_l2_init.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
The CPUNum Field in EBase register is 10bit wide, so after 1 bit right
shift, the mask value should be 0x1ff.
Signed-off-by: jerin jacob <jerinjacobk@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4420/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper:
Misc. fixes for latest changes to mach-dove/
Fixes build breakage for mach-dove
* tag 'mvebu_dove_late_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux:
ARM: dove: Add crypto engine to DT
ARM: dove: Remove watchdog from DT
ARM: dove: Restructure SoC device tree descriptor
ARM: dove: Fix clock names of sata and gbe
ARM: dove: Fix tauros2 device tree init
ARM: dove: Add pcie clock support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
A boot problem fix for am33xx beaglebone caused by GPMC,
a regression fix for local timer, and a clockdomain locking fix.
Also few minor fixes for boot time and sparse warnings.
* tag 'omap-for-v3.7-rc1/fixes-take5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message
ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck
ARM: OMAP: resolve sparse warning concerning debug_card_init()
ARM: OMAP4: Fix twd_local_timer_register regression
|