summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2007-09-21sh: Initial SH-X3 SMP support.Paul Mundt4-208/+375
This adds basic support for SH-X3 SMP (4 CPUs). More IPI and cache debugging is necessary, mostly interfacing the d-cache coherency and the I-cache broadcast invalidates. Only for testing at present! Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Plug plat_smp_setup() in to generic setup path.Paul Mundt1-0/+5
Now that the SMP stubs are in place, call in to the setup code to be defined by the platform. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Hook up the SH-X3 SMP intc register groups.Magnus Damm1-1/+1
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Bring SMP support back from the dead.Paul Mundt4-88/+118
There was a very preliminary bunch of SMP code scattered around for the SH7604 microcontrollers from way back when, and it has mostly suffered bitrot since then. With the tree already having been slowly getting prepped for SMP, this plugs in most of the remaining platform-independent bits. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - initial SMP support.Magnus Damm1-21/+57
This implements initial support for the SMP INTC (particularly INTC2) controllers. These are largely implemented as conventional blocks, with register sets grouped together at fixed strides relative to the CPU id. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add SMP tlbflush variants.Paul Mundt1-0/+140
This adds the TLB flushing routines for SMP systems, based on the MIPS implementation, with some additional SH-specific flush routines. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Avoid smp_processor_id() in cache desc paths.Paul Mundt1-31/+31
current_cpu_data uses smp_processor_id() in order to find the corresponding cpu_data. As the cache descs are all currently identical, just have this look at probed results from the boot CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Kill off special boot_cpu_data.Paul Mundt2-2/+7
This consolidates the cpu_data definitions and gets rid of the special boot_cpu_data. It's made a wrapper to the boot CPU, in order to keep the existing in-tree users happy. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Make cpufreq driver less noisy on SMP.Paul Mundt1-2/+1
The cpufreq driver banner is currently printed for each CPU, move it down so it's not as noisy and it's only printed once. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Enable maple by default for the Dreamcast.Paul Mundt1-124/+31
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add maple bus support for the SEGA Dreamcast.Adrian McMenamin1-0/+11
The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Magic Panel MTD mapping update.Markus Brunner2-6/+90
This update moves the flash mapping for the Magic Panel into the board setup. It also removes references to the old MTD mapping option in the defconfig. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: rts7751r2d: Fix up trivial build failure.Paul Mundt1-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: rts7751r2d cf_ide reworkAoi Shinkai1-12/+33
Support CF IDE on R2D-1 boards. Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up extended mode TLB for SH-X2+ cores.Paul Mundt1-17/+13
The extended mode TLB requires both 64-bit PTEs and a 64-bit pgprot, correspondingly, the PGD also has to be 64-bits, so fix that up. The kernel and user permission bits really are decoupled in early cuts of the silicon, which means that we also have to set corresponding kernel permissions on user pages or we end up with user pages that the kernel simply can't touch (!). Finally, with those things corrected, really enable MMUCR.ME and correct the PTEA value (this simply needs to be the upper 32-bits of the PTE, with the size and protection bit encoding). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Wire up URAM node on SH7785.Paul Mundt2-0/+10
Add SH7785 URAM as node 1, follows the SH-X3 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: update defconfig.Paul Mundt1-131/+92
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: Handle non-SuperIO I/O ports.Paul Mundt1-0/+2
This fixes up the port calculation logic for non-SuperIO accesses, before these were always matching the MRSHPC base, now just make sure the original port is handed back if it's not in the I/O port range. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: r7780rp: irq-r7780rp needs linux/io.h.Paul Mundt1-0/+1
Trivial build fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Trivial build fixes for INTC changes.Paul Mundt1-1/+1
Get the IRL->IRQ stuff building. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: heartbeat needs 32-bit writes.Paul Mundt1-0/+1
Most boards use 8 or 16-bit access for the LED bank, se7206 needs 32. There's only 8 individual LEDs however, each with a 'special' value in terms of logical ordering. Go FPGA, go! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: Make the I/O port routines less stupid.Paul Mundt2-33/+4
The port routines were logically inverted, and the MRSHPC range had no upper bound, causing 8 and 16-bit port I/O to get mangled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Magic Panel R2 board support.Markus Brunner6-0/+1261
This adds support for the SH7720 (SH3-DSP) based Magic Panel R2 board. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Enable pata_platform in defconfig.Kristoffer Ericson1-18/+4
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Enable touchscreen and powerbutton IRQs.Kristoffer Ericson1-9/+24
IRQ0->IRQ3 need to be an IRQ mode for these to work, fix them up. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Don't enable FPU for SH4AL-DSP.Paul Mundt2-1/+5
This leads to invalid configurations where both FPU and DSP support can be enabled in the same kernel, resulting in build failure. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: INTC stubs for SH7343 and SH7770 builds.Paul Mundt2-0/+8
Get the SH7343 and SH7770 stuff linking again. Both of these still require proper INTC support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Update CF IRQ for INTC changes.Kristoffer Ericson1-1/+1
The vector changed, so follow the INTC changes for the new vector. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: dma: Fix up build for SH7709 support.Kristoffer Ericson1-0/+1
Trivial build fixes for SH7709. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hd64461: Trivial build fixes for SH7709.Kristoffer Ericson1-1/+5
Some trivial fixes to get SH7709 + HD64461 building again. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: APM build fix and new battery values.Kristoffer Ericson1-5/+4
Build fixes for the hp6xx APM code, as well as some adjustments for the battery values. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: update hp6xx defconfig.Kristoffer Ericson1-293/+268
hp6xx_defconfig resync. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: nommu fault handler needs signal.h.Paul Mundt1-0/+1
Trivial build fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up se7751 build.Paul Mundt1-1/+0
Trivial compile fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: remove sh7780 interrupt controller hack from pci codeMagnus Damm1-13/+0
This patch removes the sh778x specific pci code that pokes in the interrupt controller and overwrites things. The new and improved IRL code manages this in plat_irq_setup() and plat_irq_setup_pins() instead. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - rework higlander irq code for r7780mp and r7785rpMagnus Damm5-19/+152
This patch reworks the highlander irq code for r7780mp and r7785rp. The same strategy as for the new R2D code is used here - the board specific interrupts are now starting from HL_FPGA_IRQ_BASE. The code for r7780rp is not touched due to lack of hardware. Tested with CF, AX88796 on r7780mp and r7785rp. The touch switch interrupt has also been tested on r7780mp. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: minor fixesMagnus Damm3-2/+1
This patch contains the following fixes: - Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT. - Removes duplicate include from rts7751r2d irq code. - Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - irl mode update for sh7780 and sh7785Magnus Damm2-4/+84
This patch contains the following fixes and improvements: - Fix address typo for INTMSK2 / INTMSKCLR2 registers on sh7780. - Adds IRQ_MODE_IRLnnnn_MASK using intc controller for IRL masking. - Good old IRQ_MODE_IRLnnnn should not register any intc controller. - plat_irq_setup_pins() now selects IRL or IRQ mode. - the holding function is now disabled using ICR0. By default all external pin interrupts are disabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: remove CONFIG_CPU_HAS_INTC_IRQMagnus Damm3-25/+1
All processor specific interrupt code is now converted to make use of the new intc code. The config option CONFIG_CPU_HAS_INTC_IRQ is because of that pointless. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up heartbeat build and resource size.Paul Mundt11-15/+15
We were abusing the resource size for the number of bits, this has been reworked using proper platform data, so this can be tidied up now. Boards in general only have a 1-byte wide resource, which the ioremap_nocache() case already handles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: defconfigs for R2D-PLUS and for R2D-1Magnus Damm2-329/+1310
This patch removes the old r2d config file named rts7751r2d_defconfig and adds separate config files for the two r2d board versions. The two new defconfigs are identical with the exception of board selection: - rts7751r2dplus_defconfig selects CONFIG_RTS7751R2D_PLUS=y - rts7751r2d1_defconfig selects CONFIG_RTS7751R2D_1=y Please remember to update both files with r2d changes in the future. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Kill off volatile silliness in sq_flush_range().Paul Mundt1-2/+2
CC arch/sh/kernel/cpu/sh4/sq.o arch/sh/kernel/cpu/sh4/sq.c: In function 'sq_flush_range': arch/sh/kernel/cpu/sh4/sq.c:65: warning: passing argument 1 of 'prefetch' discards qualifiers from pointer target type This didn't actually need to be volatile in the first place, so just kill off the qualifier entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: More license string silliness.Paul Mundt2-2/+2
'GPL v2' vs 'GPLv2'. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: heartbeat driver update.Paul Mundt7-39/+87
Add some flags for the heartbeat driver, and kill off some duplication in the bit positions for the boards that don't have special cases. This also allows for variable access widths and inversion. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7206Magnus Damm2-52/+159
This patch converts the cpu specific interrupt setup code for sh7206 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7619Magnus Damm2-38/+57
This patch converts the cpu specific interrupt setup code for sh7619 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: fix irqs for the second serial port on sh7206Magnus Damm1-4/+4
This patch makes sure the serial port interrupt irqs matches the datasheet. Only irqs for SCIF1 are changed. While at some cosmetic spaces are added. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - primary priority masking fixesMagnus Damm1-5/+28
This patch contains various intc fixes for problems reported by Markus Brunner on the linuxsh-dev mailing list: http://marc.info/?l=linuxsh-dev&m=118701948224991&w=1 Apart from added comments, the fixes are: - add intc_set_priority() function prototype to hw_irq.h - fix off-by-one error in intc_set_priority() - make sure _INTC_WIDTH() is set for primary priority masking Big thanks to Markus for finding these problems. Version two fixes a compile error and an inverted primary check. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Markus Brunner <super.firetwister@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - mark data structures as __initdataMagnus Damm11-79/+76
With the intc core improved it is now possible to put the intc data structures in the initdata section. Version two of this patch puts the __initdata inside DECLARE_INTC_DESC() and removes the __initdata included in the board specific r2d code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: x3 - add ipi vectorsMagnus Damm1-0/+9
With the intc dual prio register support in place it is now possible to add the ipi vectors to x3. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 05:34:29 +0000