summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-03-09Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-3/+7
Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ...
2021-03-09Merge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds2-10/+7
Pull sparc fixes from David Miller: "Fix opcode filtering for exceptions, and clean up defconfig" * git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc: sparc: sparc64_defconfig: remove duplicate CONFIGs sparc64: Fix opcode filtering in handling of no fault loads
2021-03-09sparc: sparc64_defconfig: remove duplicate CONFIGsCorentin Labbe1-3/+1
After my patch there is CONFIG_ATA defined twice. Remove the duplicate one. Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot test with NFS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09sparc64: Fix opcode filtering in handling of no fault loadsRob Gardner1-7/+6
is_no_fault_exception() has two bugs which were discovered via random opcode testing with stress-ng. Both are caused by improper filtering of opcodes. The first bug can be triggered by a floating point store with a no-fault ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040. The code first tests op3[5] (0x1000000), which denotes a floating point instruction, and then tests op3[2] (0x200000), which denotes a store instruction. But these bits are not mutually exclusive, and the above mentioned opcode has both bits set. The intent is to filter out stores, so the test for stores must be done first in order to have any effect. The second bug can be triggered by a floating point load with one of the invalid ASI values 0x8e or 0x8f, which pass this check in is_no_fault_exception(): if ((asi & 0xf2) == ASI_PNF) An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38", opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal in handle_ldf_stq(), and is_no_fault_exception() must not allow these invalid asi values to make it that far. In both of these cases, handle_ldf_stq() reacts by calling sun4v_data_access_exception() or spitfire_data_access_exception(), which call is_no_fault_exception() and results in an infinite recursion. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09Merge tag 'mips-fixes_5.12_1' of ↵Linus Torvalds7-7/+33
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fixes for boot breakage because of misaligned FDTs - fix for overwritten exception handlers - enable MIPS optimized crypto for all MIPS CPUs to improve wireguard performance * tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kernel: Reserve exception base early to prevent corruption MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes crypto: mips/poly1305 - enable for all MIPS processors MIPS: boot/compressed: Copy DTB to aligned address
2021-03-09MIPS: kernel: Reserve exception base early to prevent corruptionThomas Bogendoerfer4-5/+17
BMIPS is one of the few platforms that do change the exception base. After commit 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end") we started seeing BMIPS boards fail to boot with the built-in FDT being corrupted. Before the cited commit, early allocations would be in the [kernel_end, RAM_END] range, but after commit they would be within [RAM_START + PAGE_SIZE, RAM_END]. The custom exception base handler that is installed by bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the memory region allocated by unflatten_and_copy_device_tree() thus corrupting the FDT used by the kernel. To fix this, we need to perform an early reservation of the custom exception space. Additional we reserve the first 4k (1k for R3k) for either normal exception vector space (legacy CPUs) or special vectors like cache exceptions. Huge thanks to Serge for analysing and proposing a solution to this issue. Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end") Reported-by: Kamal Dasu <kdasu.kdev@gmail.com> Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-08Merge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds20-642/+198
Pull sparc updates from David Miller: "Just some more random bits from Al, including a conversion over to generic extables" * git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc: sparc32: take ->thread.flags out sparc32: get rid of fake_swapper_regs sparc64: get rid of fake_swapper_regs sparc32: switch to generic extables sparc32: switch copy_user.S away from range exception table entries sparc32: get rid of range exception table entries in checksum_32.S sparc32: switch __bzero() away from range exception table entries sparc32: kill lookup_fault() sparc32: don't bother with lookup_fault() in __bzero()
2021-03-08MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytesBjørn Mork1-1/+5
The devicetree specification requires 8-byte alignment in memory. This is now enforced by libfdt since commit 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") which included the upstream commit 5e735860c478 ("libfdt: Check for 8-byte address alignment in fdt_ro_probe_()"). This broke the MIPS raw appended DTBs which would be appended to the image immediately following the initramfs section. This ends with a 32bit size, resulting in a 4-byte alignment of the DTB. Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB is defined. Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-08crypto: mips/poly1305 - enable for all MIPS processorsMaciej W. Rozycki1-2/+2
The MIPS Poly1305 implementation is generic MIPS code written such as to support down to the original MIPS I and MIPS III ISA for the 32-bit and 64-bit variant respectively. Lift the current limitation then to enable code for MIPSr1 ISA or newer processors only and have it available for all MIPS processors. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation") Cc: stable@vger.kernel.org # v5.5+ Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-08MIPS: boot/compressed: Copy DTB to aligned addressPaul Cercueil2-0/+10
Since 5.12-rc1, the Device Tree blob must now be properly aligned. Therefore, the decompress routine must be careful to copy the blob at the next aligned address after the kernel image. This commit fixes the kernel sometimes not booting with a Device Tree blob appended to it. Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-07Merge branch 'parisc-5.12-2' of ↵Linus Torvalds2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Two small parisc architecture fixes: fix a linking failure reported by the kernel test robot and remove a duplicate include" * 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: arch/parisc/kernel: remove duplicate include in ptrace parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TEST
2021-03-07Merge tag 'powerpc-5.12-2' of ↵Linus Torvalds9-21/+44
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One non-fix, the conversion of vio_driver->remove() to return void, which touches various powerpc specific drivers. Fix the privilege checks we do in our perf handling, which could cause soft/hard lockups in some configurations. Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the second kernel. Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit). Fix a bug in our VSX (vector) instruction emulation, which should only be seen when doing VSX ops to cache inhibited mappings. Three commits fixing various build issues with obscure configurations. Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, and Uwe Kleine-König" * tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/sstep: Fix VSX instruction emulation powerpc/perf: Fix handling of privilege level checks in perf interrupt context powerpc: Force inlining of mmu_has_feature to fix build failure vio: make remove callback return void powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit() powerpc/603: Fix protection of user pages mapped with PROT_NONE powerpc/pseries: Don't enforce MSI affinity with kdump powerpc/4xx: Fix build errors from mfdcr()
2021-03-06m68k: Fix virt_addr_valid() W=1 compiler warningsGeert Uytterhoeven2-3/+3
If CONFIG_DEBUG_SG=y, and CONFIG_MMU=y: include/linux/scatterlist.h: In function ‘sg_set_buf’: arch/m68k/include/asm/page_mm.h:174:49: warning: ordered comparison of pointer with null pointer [-Wextra] 174 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory) | ^~ or CONFIG_MMU=n: include/linux/scatterlist.h: In function ‘sg_set_buf’: arch/m68k/include/asm/page_no.h:33:50: warning: ordered comparison of pointer with null pointer [-Wextra] 33 | #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ | ^~ Fix this by doing the comparison in the "unsigned long" instead of the "void *" domain. Note that for now this is only seen when compiling btrfs, due to commit e9aa7c285d20a69c ("btrfs: enable W=1 checks for btrfs"), but as people are doing more W=1 compile testing, it will start to show up elsewhere, too. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/20210305084122.4118826-1-geert@linux-m68k.org
2021-03-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-16/+400
Pull KVM fixes from Paolo Bonzini: - Doc fixes - selftests fixes - Add runstate information to the new Xen support - Allow compiling out the Xen interface - 32-bit PAE without EPT bugfix - NULL pointer dereference bugfix * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Clear the CR4 register on reset KVM: x86/xen: Add support for vCPU runstate information KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info selftests: kvm: Mmap the entire vcpu mmap area KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1 KVM: x86: allow compiling out the Xen hypercall interface KVM: xen: flush deferred static key before checking it KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref KVM: x86: remove misplaced comment on active_mmu_pages KVM: Documentation: rectify rst markup in kvm_run->flags Documentation: kvm: fix messy conversion from .txt to .rst
2021-03-04Merge tag 'for-linus-5.12b-rc2-tag' of ↵Linus Torvalds4-33/+93
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two security issues (XSA-367 and XSA-369)" * tag 'for-linus-5.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix p2m size in dom0 for disabled memory hotplug case xen-netback: respect gnttab_map_refs()'s return value Xen/gnttab: handle p2m update errors on a per-slot basis
2021-03-04arch/parisc/kernel: remove duplicate include in ptraceZhang Yunkai1-2/+0
'linux/compat.h' included in 'arch/parisc/kernel/ptrace.c' is duplicated. It is also included in the 24th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2021-03-03xen: fix p2m size in dom0 for disabled memory hotplug caseJuergen Gross3-26/+21
Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") foreign mappings are using guest physical addresses allocated via ZONE_DEVICE functionality. This will result in problems for the case of no balloon memory hotplug being configured, as the p2m list will only cover the initial memory size of the domain. Any ZONE_DEVICE allocated address will be outside the p2m range and thus a mapping can't be established with that memory address. Fix that by extending the p2m size for that case. At the same time add a check for a to be created mapping to be within the p2m limits in order to detect errors early. While changing a comment, remove some 32-bit leftovers. This is XSA-369. Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Cc: <stable@vger.kernel.org> # 5.9 Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-03Xen/gnttab: handle p2m update errors on a per-slot basisJan Beulich2-7/+72
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-02ia64: don't call handle_signal() unless there's actually a signal queuedJens Axboe1-1/+2
Sergei and John both reported that ia64 failed to boot in 5.11, and it was related to signals. Turns out the ia64 signal handling is a bit odd, it doesn't check the return value of get_signal() for whether there's a signal to deliver or not. With the introduction of TIF_NOTIFY_SIGNAL, then task_work could trigger it. Fix it by only calling handle_signal() if we actually have a real signal to deliver. This brings it in line with all other archs, too. Fixes: b269c229b0e8 ("ia64: add support for TIF_NOTIFY_SIGNAL") Reported-by: Sergei Trofimovich <slyich@gmail.com> Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-02parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TESTHelge Deller1-2/+5
The kernel test robot reported multiple linkage problems like this: hppa64-linux-ld: init/main.o(.init.text+0x56c): cannot reach printk init/main.o: in function `unknown_bootoption': (.init.text+0x56c): relocation truncated to fit: R_PARISC_PCREL22F against symbol `printk' defined in .text.unlikely section in kernel/printk/printk.o There are two ways to solve it: a) Enable the -mlong-call compiler option (CONFIG_MLONGCALLS), b) Add long branch stub support in 64-bit linker. While b) is the long-term solution, this patch works around the issue by automatically enabling the CONFIG_MLONGCALLS option when CONFIG_COMPILE_TEST is set, which indicates that a non-production kernel (e.g. 0-day kernel) is built. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Fixes: 00e35f2b0e8a ("parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES") Cc: stable@vger.kernel.org # v5.6+
2021-03-02KVM: SVM: Clear the CR4 register on resetBabu Moger1-0/+1
This problem was reported on a SVM guest while executing kexec. Kexec fails to load the new kernel when the PCID feature is enabled. When kexec starts loading the new kernel, it starts the process by resetting the vCPU's and then bringing each vCPU online one by one. The vCPU reset is supposed to reset all the register states before the vCPUs are brought online. However, the CR4 register is not reset during this process. If this register is already setup during the last boot, all the flags can remain intact. The X86_CR4_PCIDE bit can only be enabled in long mode. So, it must be enabled much later in SMP initialization. Having the X86_CR4_PCIDE bit set during SMP boot can cause a boot failures. Fix the issue by resetting the CR4 register in init_vmcb(). Signed-off-by: Babu Moger <babu.moger@amd.com> Message-Id: <161471109108.30811.6392805173629704166.stgit@bmoger-ubuntu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-02KVM: x86/xen: Add support for vCPU runstate informationDavid Woodhouse4-2/+343
This is how Xen guests do steal time accounting. The hypervisor records the amount of time spent in each of running/runnable/blocked/offline states. In the Xen accounting, a vCPU is still in state RUNSTATE_running while in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules does the state become RUNSTATE_blocked. In KVM this means that even when the vCPU exits the kvm_run loop, the state remains RUNSTATE_running. The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given amount of time to the blocked state and subtract it from the running state. The state_entry_time corresponds to get_kvmclock_ns() at the time the vCPU entered the current state, and the total times of all four states should always add up to state_entry_time. Co-developed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20210301125309.874953-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-02KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_infoDavid Woodhouse1-0/+4
When clearing the per-vCPU shared regions, set the return value to zero to indicate success. This was causing spurious errors to be returned to userspace on soft reset. Also add a paranoid BUILD_BUG_ON() for compat structure compatibility. Fixes: 0c165b3c01fe ("KVM: x86/xen: Allow reset of Xen attributes") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20210301125309.874953-1-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-02KVM: x86: allow compiling out the Xen hypercall interfacePaolo Bonzini4-2/+42
The Xen hypercall interface adds to the attack surface of the hypervisor and will be used quite rarely. Allow compiling it out. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-02powerpc/sstep: Fix VSX instruction emulationJordan Niethe1-2/+2
Commit af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions") added loading and storing 32 word long data into adjacent VSRs. However the calculation used to determine if two VSRs needed to be loaded/stored inadvertently prevented the load/storing taking place for instructions with a data length less than 16 words. This causes the emulation to not function correctly, which can be seen by the alignment_handler selftest: $ ./alignment_handler [snip] test: test_alignment_handler_vsx_207 tags: git_version:powerpc-5.12-1-0-g82d2c16b350f VSX: 2.07B Doing lxsspx: PASSED Doing lxsiwax: FAILED: Wrong Data Doing lxsiwzx: PASSED Doing stxsspx: PASSED Doing stxsiwx: PASSED failure: test_alignment_handler_vsx_207 test: test_alignment_handler_vsx_300 tags: git_version:powerpc-5.12-1-0-g82d2c16b350f VSX: 3.00B Doing lxsd: PASSED Doing lxsibzx: PASSED Doing lxsihzx: PASSED Doing lxssp: FAILED: Wrong Data Doing lxv: PASSED Doing lxvb16x: PASSED Doing lxvh8x: PASSED Doing lxvx: PASSED Doing lxvwsx: FAILED: Wrong Data Doing lxvl: PASSED Doing lxvll: PASSED Doing stxsd: PASSED Doing stxsibx: PASSED Doing stxsihx: PASSED Doing stxssp: PASSED Doing stxv: PASSED Doing stxvb16x: PASSED Doing stxvh8x: PASSED Doing stxvx: PASSED Doing stxvl: PASSED Doing stxvll: PASSED failure: test_alignment_handler_vsx_300 [snip] Fix this by making sure all VSX instruction emulation correctly load/store from the VSRs. Fixes: af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210225031946.1458206-1-jniethe5@gmail.com
2021-03-02powerpc/perf: Fix handling of privilege level checks in perf interrupt contextAthira Rajeev1-2/+2
Running "perf mem record" in powerpc platforms with selinux enabled resulted in soft lockup's. Below call-trace was seen in the logs: CPU: 58 PID: 3751 Comm: sssd_nss Not tainted 5.11.0-rc7+ #2 NIP: c000000000dff3d4 LR: c000000000dff3d0 CTR: 0000000000000000 REGS: c000007fffab7d60 TRAP: 0100 Not tainted (5.11.0-rc7+) ... NIP _raw_spin_lock_irqsave+0x94/0x120 LR _raw_spin_lock_irqsave+0x90/0x120 Call Trace: 0xc00000000fd47260 (unreliable) skb_queue_tail+0x3c/0x90 audit_log_end+0x6c/0x180 common_lsm_audit+0xb0/0xe0 slow_avc_audit+0xa4/0x110 avc_has_perm+0x1c4/0x260 selinux_perf_event_open+0x74/0xd0 security_perf_event_open+0x68/0xc0 record_and_restart+0x6e8/0x7f0 perf_event_interrupt+0x22c/0x560 performance_monitor_exception0x4c/0x60 performance_monitor_common_virt+0x1c8/0x1d0 interrupt: f00 at _raw_spin_lock_irqsave+0x38/0x120 NIP: c000000000dff378 LR: c000000000b5fbbc CTR: c0000000007d47f0 REGS: c00000000fd47860 TRAP: 0f00 Not tainted (5.11.0-rc7+) ... NIP _raw_spin_lock_irqsave+0x38/0x120 LR skb_queue_tail+0x3c/0x90 interrupt: f00 0x38 (unreliable) 0xc00000000aae6200 audit_log_end+0x6c/0x180 audit_log_exit+0x344/0xf80 __audit_syscall_exit+0x2c0/0x320 do_syscall_trace_leave+0x148/0x200 syscall_exit_prepare+0x324/0x390 system_call_common+0xfc/0x27c The above trace shows that while the CPU was handling a performance monitor exception, there was a call to security_perf_event_open() function. In powerpc core-book3s, this function is called from perf_allow_kernel() check during recording of data address in the sample via perf_get_data_addr(). Commit da97e18458fb ("perf_event: Add support for LSM and SELinux checks") introduced security enhancements to perf. As part of this commit, the new security hook for perf_event_open() was added in all places where perf paranoid check was previously used. In powerpc core-book3s code, originally had paranoid checks in perf_get_data_addr() and power_pmu_bhrb_read(). So perf_paranoid_kernel() checks were replaced with perf_allow_kernel() in these PMU helper functions as well. The intention of paranoid checks in core-book3s was to verify privilege access before capturing some of the sample data. Along with paranoid checks, perf_allow_kernel() also does a security_perf_event_open(). Since these functions are accessed while recording a sample, we end up calling selinux_perf_event_open() in PMI context. Some of the security functions use spinlock like sidtab_sid2str_put(). If a perf interrupt hits under a spin lock and if we end up in calling selinux hook functions in PMI handler, this could cause a dead lock. Since the purpose of this security hook is to control access to perf_event_open(), it is not right to call this in interrupt context. The paranoid checks in powerpc core-book3s were done at interrupt time which is also not correct. Reference commits: Commit cd1231d7035f ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()") Commit bb19af816025 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer") We only allow creation of events that have already passed the privilege checks in perf_event_open(). So these paranoid checks are not needed at event time. As a fix, patch uses 'event->attr.exclude_kernel' check to prevent exposing kernel address for userspace only sampling. Fixes: cd1231d7035f ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()") Cc: stable@vger.kernel.org # v4.17+ Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1614247839-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com
2021-03-02powerpc: Force inlining of mmu_has_feature to fix build failureChristophe Leroy1-2/+2
The test robot has managed to generate a random config leading to following build failure: LD .tmp_vmlinux.kallsyms1 powerpc64-linux-ld: arch/powerpc/mm/pgtable.o: in function `ptep_set_access_flags': pgtable.c:(.text.ptep_set_access_flags+0xf0): undefined reference to `hash__flush_tlb_page' powerpc64-linux-ld: arch/powerpc/mm/book3s32/mmu.o: in function `MMU_init_hw_patch': mmu.c:(.init.text+0x452): undefined reference to `patch__hash_page_A0' powerpc64-linux-ld: mmu.c:(.init.text+0x45e): undefined reference to `patch__hash_page_A0' powerpc64-linux-ld: mmu.c:(.init.text+0x46a): undefined reference to `patch__hash_page_A1' powerpc64-linux-ld: mmu.c:(.init.text+0x476): undefined reference to `patch__hash_page_A1' powerpc64-linux-ld: mmu.c:(.init.text+0x482): undefined reference to `patch__hash_page_A2' powerpc64-linux-ld: mmu.c:(.init.text+0x48e): undefined reference to `patch__hash_page_A2' powerpc64-linux-ld: mmu.c:(.init.text+0x49e): undefined reference to `patch__hash_page_B' powerpc64-linux-ld: mmu.c:(.init.text+0x4aa): undefined reference to `patch__hash_page_B' powerpc64-linux-ld: mmu.c:(.init.text+0x4b6): undefined reference to `patch__hash_page_C' powerpc64-linux-ld: mmu.c:(.init.text+0x4c2): undefined reference to `patch__hash_page_C' powerpc64-linux-ld: mmu.c:(.init.text+0x4ce): undefined reference to `patch__flush_hash_A0' powerpc64-linux-ld: mmu.c:(.init.text+0x4da): undefined reference to `patch__flush_hash_A0' powerpc64-linux-ld: mmu.c:(.init.text+0x4e6): undefined reference to `patch__flush_hash_A1' powerpc64-linux-ld: mmu.c:(.init.text+0x4f2): undefined reference to `patch__flush_hash_A1' powerpc64-linux-ld: mmu.c:(.init.text+0x4fe): undefined reference to `patch__flush_hash_A2' powerpc64-linux-ld: mmu.c:(.init.text+0x50a): undefined reference to `patch__flush_hash_A2' powerpc64-linux-ld: mmu.c:(.init.text+0x522): undefined reference to `patch__flush_hash_B' powerpc64-linux-ld: mmu.c:(.init.text+0x532): undefined reference to `patch__flush_hash_B' powerpc64-linux-ld: arch/powerpc/mm/book3s32/mmu.o: in function `update_mmu_cache': mmu.c:(.text.update_mmu_cache+0xa0): undefined reference to `add_hash_page' powerpc64-linux-ld: mm/memory.o: in function `zap_pte_range': memory.c:(.text.zap_pte_range+0x160): undefined reference to `flush_hash_pages' powerpc64-linux-ld: mm/memory.o: in function `handle_pte_fault': memory.c:(.text.handle_pte_fault+0x180): undefined reference to `hash__flush_tlb_page' This is due to mmu_has_feature() not being inlined. See extract of build of mmu.c with -Winline: In file included from ./include/linux/mm_types.h:19, from ./include/linux/mmzone.h:21, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/powerpc/mm/book3s32/mmu.c:21: ./arch/powerpc/include/asm/mmu.h: In function 'find_free_bat': ./arch/powerpc/include/asm/mmu.h:231:20: warning: inlining failed in call to 'early_mmu_has_feature': call is unlikely and code size would grow [-Winline] 231 | static inline bool early_mmu_has_feature(unsigned long feature) | ^~~~~~~~~~~~~~~~~~~~~ ./arch/powerpc/include/asm/mmu.h:291:9: note: called from here 291 | return early_mmu_has_feature(feature); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The code relies on constant folding of MMU_FTRS_POSSIBLE at buildtime and elimination of non possible parts of code at compile time. For this to work, mmu_has_feature() and early_mmu_has_feature() must be inlined. Fixes: 259149cf7c3c ("powerpc/32s: Only build hash code when CONFIG_PPC_BOOK3S_604 is selected") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cf61345912c078c96f171afd0fcc48ef27cbdc3f.1614443418.git.christophe.leroy@csgroup.eu
2021-03-02vio: make remove callback return voidUwe Kleine-König2-5/+4
The driver core ignores the return value of struct bus_type::remove() because there is only little that can be done. To simplify the quest to make this function return void, let struct vio_driver::remove() return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea. Note there are two nominally different implementations for a vio bus: one in arch/sparc/kernel/vio.c and the other in arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc one. Before this patch for a device that was bound to a driver without a remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device core still considers the device unbound after vio_bus_remove() returns calling this unconditionally is the consistent behaviour which is implemented here. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [mpe: Drop unneeded hvcs_remove() forward declaration, squash in change from sfr to drop ibmvnic_remove() forward declaration] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
2021-03-01powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()Christophe Leroy1-1/+1
As reported by kernel test robot, a randconfig with high amount of debuging options can lead to build failure for undefined reference to replay_soft_interrupts() on ppc32. This is due to gcc not seeing that __prep_irq_for_enabled_exit() always returns true on ppc32 because it doesn't inline it for some reason. Force inlining of __prep_irq_for_enabled_exit() to fix the build. Fixes: 344bb20b159d ("powerpc/syscall: Make interrupt.c buildable on PPC32") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/53f3a1f719441761000c41154602bf097d4350b5.1614148356.git.christophe.leroy@csgroup.eu
2021-03-01powerpc/603: Fix protection of user pages mapped with PROT_NONEChristophe Leroy1-3/+6
On book3s/32, page protection is defined by the PP bits in the PTE which provide the following protection depending on the access keys defined in the matching segment register: - PP 00 means RW with key 0 and N/A with key 1. - PP 01 means RW with key 0 and RO with key 1. - PP 10 means RW with both key 0 and key 1. - PP 11 means RO with both key 0 and key 1. Since the implementation of kernel userspace access protection, PP bits have been set as follows: - PP00 for pages without _PAGE_USER - PP01 for pages with _PAGE_USER and _PAGE_RW - PP11 for pages with _PAGE_USER and without _PAGE_RW For kernelspace segments, kernel accesses are performed with key 0 and user accesses are performed with key 1. As PP00 is used for non _PAGE_USER pages, user can't access kernel pages not flagged _PAGE_USER while kernel can. For userspace segments, both kernel and user accesses are performed with key 0, therefore pages not flagged _PAGE_USER are still accessible to the user. This shouldn't be an issue, because userspace is expected to be accessible to the user. But unlike most other architectures, powerpc implements PROT_NONE protection by removing _PAGE_USER flag instead of flagging the page as not valid. This means that pages in userspace that are not flagged _PAGE_USER shall remain inaccessible. To get the expected behaviour, just mimic other architectures in the TLB miss handler by checking _PAGE_USER permission on userspace accesses as if it was the _PAGE_PRESENT bit. Note that this problem only is only for 603 cores. The 604+ have an hash table, and hash_page() function already implement the verification of _PAGE_USER permission on userspace pages. Fixes: f342adca3afc ("powerpc/32s: Prepare Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Christoph Plattner <christoph.plattner@thalesgroup.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4a0c6e3bb8f0c162457bf54d9bc6fd8d7b55129f.1612160907.git.christophe.leroy@csgroup.eu
2021-03-01powerpc/pseries: Don't enforce MSI affinity with kdumpGreg Kurz1-2/+23
Depending on the number of online CPUs in the original kernel, it is likely for CPU #0 to be offline in a kdump kernel. The associated IRQs in the affinity mappings provided by irq_create_affinity_masks() are thus not started by irq_startup(), as per-design with managed IRQs. This can be a problem with multi-queue block devices driven by blk-mq : such a non-started IRQ is very likely paired with the single queue enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This causes the device to remain silent and likely hangs the guest at some point. This is a regression caused by commit 9ea69a55b3b9 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()"). Note that this only happens with the XIVE interrupt controller because XICS has a workaround to bypass affinity, which is activated during kdump with the "noirqdistrib" kernel parameter. The issue comes from a combination of factors: - discrepancy between the number of queues detected by the multi-queue block driver, that was used to create the MSI vectors, and the single queue mode enforced later on by blk-mq because of kdump (i.e. keeping all queues fixes the issue) - CPU#0 offline (i.e. kdump always succeed with CPU#0) Given that I couldn't reproduce on x86, which seems to always have CPU#0 online even during kdump, I'm not sure where this should be fixed. Hence going for another approach : fine-grained affinity is for performance and we don't really care about that during kdump. Simply revert to the previous working behavior of ignoring affinity masks in this case only. Fixes: 9ea69a55b3b9 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210215094506.1196119-1-groug@kaod.org
2021-03-01powerpc/4xx: Fix build errors from mfdcr()Michael Ellerman1-4/+4
lkp reported a build error in fsp2.o: CC arch/powerpc/platforms/44x/fsp2.o {standard input}:577: Error: unsupported relocation against base Which comes from: pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0)); Where our mfdcr() macro is stringifying "base + PLB4OPB_GESR0", and passing that to the assembler, which obviously doesn't work. The mfdcr() macro already checks that the argument is constant using __builtin_constant_p(), and if not calls the out-of-line version of mfdcr(). But in this case GCC is smart enough to notice that "base + PLB4OPB_GESR0" will be constant, even though it's not something we can immediately stringify into a register number. Segher pointed out that passing the register number to the inline asm as a constant would be better, and in fact it fixes the build error, presumably because it gives GCC a chance to resolve the value. While we're at it, change mtdcr() similarly. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20210218123058.748882-1-mpe@ellerman.id.au
2021-02-28Merge tag 'kbuild-fixes-v5.12' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix UNUSED_KSYMS_WHITELIST for Clang LTO - Make -s builds really silent irrespective of V= option - Fix build error when SUBLEVEL or PATCHLEVEL is empty * tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again kbuild: make -s option take precedence over V=1 ia64: remove redundant READELF from arch/ia64/Makefile kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO kbuild: lto: add _mcount to list of used symbols
2021-02-28Merge tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds93-992/+1346
Pull arch/csky updates from Guo Ren: "Features: - add new memory layout 2.5G(user):1.5G(kernel) - add kmemleak support - reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO - add faulthandler_disabled() check - support (fix) swapon - add (fix) _PAGE_ACCESSED for default pgprot - abort uaccess retries upon fatal signal (from arm) Fixes and optimizations: - fix perf probe failure - fix show_regs doesn't contain regs->usp - remove custom asm/atomic.h implementation - fix barrier design - fix futex SMP implementation - fix asm/cmpxchg.h with correct ordering barrier - cleanup asm/spinlock.h - fix PTE global for 2.5:1.5 virtual memory - remove prologue of page fault handler in entry.S - fix TLB maintenance synchronization problem - add show_tlb for CPU_CK860 debug - fix FAULT_FLAG_XXX param for handle_mm_fault - fix update_mmu_cache called with user io mapping - fix do_page_fault parent irq status - fix a size determination in gpr_get() - pgtable.h: Coding convention - kprobe: Fix code in simulate without 'long' - fix pfn_valid error with wrong max_mapnr - use free_initmem_default() in free_initmem() - fix compile error" * tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits) csky: Fixup compile error csky: use free_initmem_default() in free_initmem() csky: Fixup pfn_valid error with wrong max_mapnr csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO csky: kprobe: Fixup code in simulate without 'long' csky: Fixup swapon csky: pgtable.h: Coding convention csky: Fixup _PAGE_ACCESSED for default pgprot csky: remove unused including <linux/version.h> csky: Fix a size determination in gpr_get() csky: Reconstruct VDSO framework csky: mm: abort uaccess retries upon fatal signal csky: Sync riscv mm/fault.c for easy maintenance csky: Fixup do_page_fault parent irq status csky: Add faulthandler_disabled() check csky: Fixup update_mmu_cache called with user io mapping csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault csky: Add show_tlb for CPU_CK860 debug csky: Fix TLB maintenance synchronization problem csky: Add kmemleak support ...
2021-02-28Merge tag 'riscv-for-linus-5.12-mw1' of ↵Linus Torvalds4-19/+5
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "A pair of patches that slipped through the cracks: - enable CPU hotplug in the defconfigs - some cleanups to setup_bootmem There's also a single fix for some randconfig build failures: - make NUMA depend on SMP" * tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Cleanup setup_bootmem() RISC-V: Enable CPU Hotplug in defconfigs RISC-V: Make NUMA depend on SMP
2021-02-28ia64: remove redundant READELF from arch/ia64/MakefileMasahiro Yamada1-1/+0
READELF is defined by the top Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-27Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds24-24/+24
Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
2021-02-27Merge branch 'work.misc' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff pile - no common topic here" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: whack-a-mole: don't open-code iminor/imajor 9p: fix misuse of sscanf() in v9fs_stat2inode() audit_alloc_mark(): don't open-code ERR_CAST() fs/inode.c: make inode_init_always() initialize i_ino to 0 vfs: don't unnecessarily clone write access for writable fds
2021-02-27csky: Fixup compile errorGuo Ren52-52/+0
: error: C++ style comments are not allowed in ISO C90 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. ^ error: (this will be reported only once per input file) Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2021-02-27csky: use free_initmem_default() in free_initmem()David Hildenbrand1-16/+1
The existing code is essentially free_initmem_default()->free_reserved_area() without poisoning. Note that existing code missed to update the managed page count of the zone. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Tested-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2021-02-27csky: Fixup pfn_valid error with wrong max_mapnrGuo Ren1-2/+2
The max_mapnr is the number of PFNs, not absolute PFN offset. Using set_max_mapnr API instead of setting the value directly. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2021-02-27csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, ↵Guo Ren14-3/+225
HAVE_GENERIC_VDSO It could help to reduce the latency of the time-related functions in user space. We have referenced arm's and riscv's implementation for the patch. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Vincent Chen <vincent.chen@sifive.com> Cc: Arnd Bergmann <arnd@arndb.de>
2021-02-27csky: kprobe: Fixup code in simulate without 'long'Guo Ren1-15/+7
The type of 'val' is 'unsigned long' in simulate_blz32, so 'val < 0' can't be true. Cast 'val' to 'long' here to determine branch token or not, Fixup instructions: bnezad32, bhsz32, bhz32, blsz32, blz32 Link: https://lore.kernel.org/linux-csky/CAJF2gTQjKXR9gpo06WAWG1aquiT87mATiMGorXs6ChxOxoe90Q@mail.gmail.com/T/#t Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Co-developed-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
2021-02-27csky: Fixup swaponGuo Ren3-9/+52
Current csky's swappon is broken by wrong swap PTE entry format. Now redesign the new format for abiv1 & abiv2 and make swappon + zram work properly on csky machines. C-SKY PTE has VALID, DIRTY to emulate PRESENT, READ, WRITE, EXEC attributes. GLOBAL bit is shared by two pages in the same tlb entry. So we need to keep GLOBAL, VALID, PRESENT zero in swp_pte. To distinguish PAGE_NONE and swp_pte, we need to use an additional bit (abiv1 is _PAGE_READ, abiv2 is _PAGE_WRITE). Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de>
2021-02-27csky: pgtable.h: Coding conventionGuo Ren3-55/+36
C-SKY page table attributes only have 'Dirty' and 'Valid' to emulate 'PRESENT, READ, WRITE, EXEC, DIRTY, ACCESSED'. This patch cleanup unnecessary definition. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de>
2021-02-26riscv: Cleanup setup_bootmem()Kefeng Wang1-19/+2
After the following patches, commit de043da0b9e7 ("RISC-V: Fix usage of memblock_enforce_memory_limit") commit 1bd14a66ee52 ("RISC-V: Remove any memblock representing unusable memory area") commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()") some logic is useless, kill the mem_start/start/end and unneeded code. Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-26RISC-V: Enable CPU Hotplug in defconfigsAnup Patel2-0/+2
The CPU hotplug support has been tested on QEMU, Spike, and SiFive Unleashed so let's enable it by default in RV32 and RV64 defconfigs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-26RISC-V: Make NUMA depend on SMPPalmer Dabbelt1-0/+1
In theory these are orthogonal, but in practice all NUMA systems are SMP. NUMA && !SMP doesn't build, everyone else is coupling them, and I don't really see any value in supporting that configuration. Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform") Suggested-by: Andrew Morton <akpm@linux-foundation.org> Suggested-by: Atish Patra <atishp@atishpatra.org> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-26Merge branch 'work.sparc32' of ↵David S. Miller13-521/+193
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
2021-02-26Merge branch 'work.sparc' of ↵David S. Miller8-121/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs