summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2016-05-10Merge tag 'imx-dt-4.7-2' of ↵Arnd Bergmann32-99/+1130
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "i.MX device tree updates for 4.7, take 2: from Shawn Guo: The i.MX device tree updates for 4.7, take 2: - Update display clock configuration for imx6q-b850v3 board - Use watchdog external reset for imx6q-ba16 board - Update operating points settings for i.MX6UL/SX/DL - New board support: imx6ul-pico-hobbit and imx6q-marsboard - Add SAI audio support for imx6ul-14x14-evk board - Enable USB OTG support for M53EVK board - A couple of fixes on DTC warnings * tag 'imx-dt-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ARM: dts: imx6: apalis: parallel lcd display support on ixora ARM: dts: imx6sx-sdb: Add 198MHz operational point ARM: dts: imx28-m28: Remove unneeded partition nodes ARM: dts: imx6ul-pico-hobbit: Add initial support ARM: dts: imx6: Do not hardcode the CLKO clock ARM: dts: imx6: Add dts for Embest MarS Board ARM: dts: imx6: fix dtc warnings for ipu endpoints ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation ARM: dts: imx6sx: Add 198MHz operating point ARM: dts: imx6ul: Fix operating points ARM: dts: imx6q-ba16: use wdog external reset ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment ARM: dts: imx6q-b850v3: Update display clock source ARM: dts: imx6q-b850v3: Remove ldb panel
2016-05-10Merge tag 'v4.6-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtArnd Bergmann1-0/+19
Merge "ARM: mediatek: dts updates for v4.7" from Matthias Brugger: - add pinctrl node for mt2701 - add mt2701 pmic wrapper binding - add auxadc binding document * tag 'v4.6-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: MediaTek: Add binding document for the AUXADC dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc arm: dts: Add pinctrl/GPIO/EINT node for mt2701
2016-05-10Merge tag 'sunxi-dt-for-4.7' of ↵Arnd Bergmann22-117/+1986
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Merge "Allwinner DT additions for 4.7" from Maxime Ripard: The usual bunch of changes, mostly: * Addition of the SPDIF support * Addition of the pre-requisites for the display support * New boards: Difrence DIT4350, colorfly e708 q1, Dserve DSRV9703C, Polaroid MID2809PXE4, Orange Pi PC, Orange Pi 2 * tag 'sunxi-dt-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (38 commits) ARM: dts: sun7i: Enable S/PDIF on the Cubietruck ARM: sun5i: Add DRAM gates ARM: sun5i: Add TV encoder gate to the DTSI ARM: sun5i: dt: Add pll3 and pll7 clocks ARM: dts: sun8i: Add dts file for the Orange Pi One SBC ARM: sun7i: dt: Enable dram gate 5 (tve0 clock) for simplefb TV output ARM: sun4i: dt: Enable dram gate 5 (tve0 clock) for simplefb TV output ARM: dts: sun5i-a13-olinuxino-micro: enable USB DRC ARM: dts: sun8i: Base Orange Pi Plus dts on the Orange Pi 2 dts ARM: dts: sun8i: Orangepi plus gpio keys fixes and improvements ARM: dts: sun8i: Add dts for Orange Pi 2 SBC ARM: dts: sun8i: Add Orange Pi PC support ARM: dts: sun8i: Fix pio nodes Orangepi Plus dts ARM: dts: sun7i: Add SPDIF to the Itead Ibox ARM: dts: sun4i: Add SPDIF to the Mele A1000 ARM: dts: sun7i: Add the SPDIF block to the A20 ARM: dts: sun4i: Add the SPDIF block to the A10 ARM: dts: sun7i: Add the SPDIF clk to the A20 ARM: dts: sun4i: Add the SPDIF clk to the A10 ARM: dts: sun7i: Add SPDIF TX pin to the A20 ...
2016-05-10Merge tag 'davinci-for-v4.7/dt-part2' of ↵Arnd Bergmann3-2/+33
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Merge "DaVinci DT updates for v4.7 (part 2)" from Sekhar Nori: Second set of DT updates for DaVinci adding support for SPI0 and some low priority fixes for ethernet and interrupt controller. * tag 'davinci-for-v4.7/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: There are 101 interrupts. ARM: dts: da850: disable mdio and eth0 in da850.dtsi ARM: davinci: da8xx-dt: Add spi0 lookup for clock matching ARM: dts: da850: add spi0 to device tree
2016-05-10Merge tag 'v4.7-rockchip-dts32-2' of ↵Arnd Bergmann5-129/+634
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "Rockchip dts32 updates for v4.7 - part2" from Heiko Stübner: This adds the rk3288-miqi as new board, adapts the edp-phy settings to the binding-change that made it into 4.6, adds rk3288 i2c controller nodes and moves the rk3288 thermal data into the soc dtsi, as there really is no need to have that separate file. * tag 'v4.7-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: move the rk3288 thermal data into rk3288.dtsi ARM: dts: rockchip: add MiQi board from mqmaker dt-bindings: add vendor-prefix for mqmaker ARM: dts: rockchip: move rk3288 edp phy under the GRF ARM: dts: rockchip: make rk3288-grf a simple-mfd ARM: dts: rockchip: add i2c nodes for RK3228 SoCs
2016-05-03ARM: mx5: dts: Enable USB OTG on M53EVKMarek Vasut1-1/+20
Add USB OTG support to M53EVK instead of just USB gadget. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: dts: imx6ul-14x14-evk: Add audio supportFabio Estevam1-0/+74
imx6ul-14x14-evk has a wm8960 codec connected via SAI2 port. Add support for it. Thanks to Petr Kulhavy <brain@jikos.cz> for the hint on initializing the PLL4 frequency to get a correct MCLK. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: dts: imx6qdl: Remove unneeded unit-addressesFabio Estevam1-6/+6
The following build warnings are seen when building with 'W=1' option: Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-1p1@110 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-3p0@120 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-2p5@130 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddcore@140 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddpu@140 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddsoc@140 has a unit name, but no reg property Fix them by removing the unneeded unit-addresses. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: dts: imx6: apalis: parallel lcd display support on ixoraMarcel Ziswiler1-0/+45
Add parallel LCD display support for the EDT ET057090DHU 5.7" LCD TFT panel. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: dts: imx6sx-sdb: Add 198MHz operational pointFabio Estevam1-0/+2
imx6sx-sdb has custom operating points entries because it has one power supply that drives both VDDARM_IN and VDDSOC_IN. As per the MX6UL datasheet we have the following minimum voltages for 198 MHz operation (after adding the 25mV margin value): VDDARM_IN = 0.975 V VDDSOC_IN = 1.175 V So use 1.175V for the 198MHz operation. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: dts: imx28-m28: Remove unneeded partition nodesFabio Estevam1-26/+0
mtdparts is passed from command line, so there is no need to have a default partitioning in device-tree. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: dts: imx6ul-pico-hobbit: Add initial supportFabio Estevam2-0/+517
Add initial support for imx6ul pico hobbit board. For information about this board, please visit: http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-29Merge tag 'omap-for-v4.7/dt-signed' of ↵Arnd Bergmann15-438/+683
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "Part two of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Fix few typos for address-cells and interrupt-names - Update dra7 voltage rail limits - Update compatible string for pcf8575 for both nxp and ti prefix - Add omap5 configuration for gpadc - Update dra7 for qspi to remove pinmux as it needs to be done by the bootloader in isolation. Also update the qspi for 64MHz frequency. - Add support for Baltos ir2110 and ir3220 - Add industrial and commercial grade thermal thresholds for am57xx * tag 'omap-for-v4.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am57xx-idk: Include Industrial grade thermal thresholds ARM: dts: am57xx-beagle-x15: Include the commercial grade thresholds ARM: dts: am57xx: Introduce industrial grade thermal thresholds ARM: dts: am57xx: Introduce commercial grade thermal thresholds ARM: dts: add DTS for Baltos IR2110 ARM: dts: add DTS for Baltos IR3220 ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz ARM: dts: dra7x: Remove QSPI pinmux ARM: dts: omap5-board-common: describe gpadc for Palmas ARM: dts: twl6030: describe gpadc ARM: dts: dra7xx: Fix compatible string for PCF8575 chip ARM: dts: AM57xx/DRA7: Update SoC voltage rail limits to match data sheet ARM: dts: OMAP36xx: : DT spelling s/#address-cell/#address-cells/ ARM: dts: omap5-cm-t54: DT spelling s/interrupt-name/interrupt-names/ ARM: dts: omap5-board-common: DT spelling s/interrupt-name/interrupt-names/
2016-04-28Merge tag 'samsung-dt-exynos-srom-fixup-4.7' of ↵Arnd Bergmann4-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "ARM: dts: exynos: Fixup for SROM controller (v4.7)" from Krzysztof Kozlowski: DeviceTree changes for new SROM controller driver reached mainline some time ago, before the driver was accepted (due to very late comments). However, after these late comments, the driver expects different bindings so we need to fix the DTS. * tag 'samsung-dt-exynos-srom-fixup-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: change SROM node compatible from generic to model specific
2016-04-28Merge tag 'socfpga_dts_for_v4.7_part_2' of ↵Arnd Bergmann2-0/+311
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Merge "SoCFPGA DTS update for v4.7, part 2" from Dinh Nguyen: - Add samtec VIN|ING board * tag 'socfpga_dts_for_v4.7_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Add samtec VIN|ING board
2016-04-28ARM: dts: am57xx-idk: Include Industrial grade thermal thresholdsKeerthy1-0/+2
am57xx-idk have Industrial grade samples whose thermal thresholds are different as compared with dra7. Hence correcting the same. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-28ARM: dts: am57xx-beagle-x15: Include the commercial grade thresholdsKeerthy1-0/+1
am57xx-beagle-x15 have commercial grade samples whose thermal thresholds lower than dra7. Hence correcting the same. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-28ARM: dts: am57xx: Introduce industrial grade thermal thresholdsKeerthy1-0/+23
The silicon version ES2.0 onwards are industrial grade samples and have higher thermal thresholds than commecial grade samples. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-28ARM: dts: am57xx: Introduce commercial grade thermal thresholdsKeerthy1-0/+23
The silicon versions which are non ES2.0 are commercial grade silicon and have lower thermal thresholds. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-28Merge tag 'samsung-dt-4.7-2' of ↵Arnd Bergmann7-35/+1
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "Secound round of Samsung Device Tree updates and improvements for v4.7" from Krzysztof Kozlowski: 1. Cleanup regulator bindings on Exynos5420 boards. 2. Support MIC bypass in display path for Exynos5420. 3. Enable PRNG and SSS for all Exynos4 devices. * tag 'samsung-dt-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devices ARM: dts: exynos: Add exynos5420-fimd compatible ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from Exynos5420 boards
2016-04-28Merge tag 'renesas-dt2-for-v4.7' of ↵Arnd Bergmann5-10/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.7" from Simon Horman * Don't disable referenced optional clocks in DT of R-Car Gen 1 & 2 SoCs * tag 'renesas-dt2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a7794: Don't disable referenced optional clocks ARM: dts: r8a7793: Don't disable referenced optional clocks ARM: dts: r8a7790: Don't disable referenced optional clocks ARM: dts: r8a7779: Don't disable referenced optional clocks ARM: dts: r8a7778: Don't disable referenced optional clocks
2016-04-28Merge tag 'lpc32xx-dt-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into ↵Arnd Bergmann5-362/+401
next/dt Merge "NXP LPC32xx device tree updates for v4.7" from Vladimir Zapolskiy: This includes a few functional changes: * new representation of MIC, SIC1 and SIC2 interrupt controllers, * disabled by default SPI1, SPI2, SSP0 and SSP1 SPI controllers in shared lpc32xx.dtsi file, * added clock sources for SPI1 and SPI2, * set default clock rate of HCLK PLL to main osc rate multiplied by 16. Also there are some non-functional changes: * flatten board DTS files by exploiting device node labels, * add 'partitions' device node for NAND SLC / MTD OF, * correct Atmel vendor prefix to describe on board AT24 EEPROMs, * rename board DTS files by adding SoC name prefix. Since now DTS files of LPC32xx boards match "^lpc32[2345]0-" pattern. * tag 'lpc32xx-dt-4.7' of git://github.com/vzapolskiy/linux-lpc32xx: ARM: dts: lpc32xx: phy3250: add SoC name prefix to board dts file ARM: dts: lpc32xx: phy3250: add NAND partitions device node ARM: dts: lpc32xx: phy3250: avoid extension of device nodes by absolute path ARM: dts: lpc32xx: ea3250: add SoC name prefix to board dts file ARM: dts: lpc32xx: ea3250: fix Atmel at24 eeprom vendor ARM: dts: lpc32xx: ea3250: add NAND partitions device node ARM: dts: lpc32xx: ea3250: avoid extension of device nodes by absolute path ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC dt-bindings: interrupt-controllers: add description of SIC1 and SIC2 ARM: dts: lpc32xx: disabled ssp0/spi1 & ssp1/spi2 by default ARM: dts: phy3250: enable ssp0 ARM: dts: lpc32xx: add clock properties to spi nodes ARM: dts: lpc32xx: set default clock rate of HCLK PLL
2016-04-28Merge tag 'at91-dt2' of ↵Arnd Bergmann4-2/+22
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Merge "Second batch of DT changes for 4.7" from Nicolas Ferre: - three low priority fixes: - sama5d2: one pin definition and dependency with the slow clock for watchdog - sama5d4: definition of watchdog IRQ property - addition of the new shutdown controller to sama5d2 & sama5d2 Xplained * tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d2: add slow clock to watchdog node ARM: dts: at91: sama5d2: add shutdown controller node ARM: dts: at91: sama5d4: add watchdog interrupt property ARM: dts: at91: fix typo in sama5d2 PIN_PD24 description
2016-04-28Merge tag 'sti-dt-for-v4.7b-1' of ↵Arnd Bergmann1-1/+125
git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt Merge "STi DT updates for v4.7 #1" from Maxime Coquelin: Highlights: ----------- - Add CPUFreq support to STiH407 family - Add Mailbox nodes to STiH407 family - Add RemoteProc nodes to STiH407 family - Use 'reserved-memory' for DMA memory on STiH407 - Use the LPC timer as a clocksource * tag 'sti-dt-for-v4.7b-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti: ARM: dts: STi: STih407: Switch LPC mode from RTC to Clocksource ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory ARM: dts: STiH407: Add nodes for RemoteProc ARM: dts: STi: stih407-family: Add nodes for Mailbox ARM: dts: STi: STiH407: Provide CPU with a means to look-up Major number ARM: dts: STi: STiH407: Link CPU with its voltage supply ARM: dts: STi: STiH407: Provide CPU with clocking information ARM: dts: STi: STiH407: Provide generic (safe) DVFS configuration
2016-04-28ARM: dts: lpc32xx: phy3250: add SoC name prefix to board dts fileVladimir Zapolskiy2-1/+1
To simplify matching of DTS files of all NXP LPC32xx powered boards by a file name add 'lpc3250' prefix to PHYTEC PHYCORE-LPC3250 board dts file. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: phy3250: add NAND partitions device nodeVladimir Zapolskiy1-23/+27
To declare MTD OF partitions NAND controller device node should have a special 'partitions' subnode, the change removes a debug message from mtd/ofpart on boot: nxp_lpc3220_slc: 'partitions' subnode not found on /ahb/flash@20020000. Trying to parse direct subnodes as partitions. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: phy3250: avoid extension of device nodes by absolute pathVladimir Zapolskiy1-144/+138
The change simplifies layout of PHY3250 board description by referencing device nodes of LPC32xx controllers by label. No functional change intended. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: ea3250: add SoC name prefix to board dts fileVladimir Zapolskiy2-1/+2
To simplify matching of DTS files of all NXP LPC32xx powered boards by a file name add 'lpc3250' prefix to Embedded Artists LPC3250 board dts file. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: ea3250: fix Atmel at24 eeprom vendorVladimir Zapolskiy1-2/+2
There is no 'at' hardware vendor defined yet, correct vendor prefix for Atmel is 'atmel'. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: ea3250: add NAND partitions device nodeVladimir Zapolskiy1-19/+23
To declare MTD OF partitions NAND controller device node should have a special 'partitions' subnode, the change removes a debug message from mtd/ofpart on boot: nxp_lpc3220_slc: 'partitions' subnode not found on /ahb/flash@20020000. Trying to parse direct subnodes as partitions. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: ea3250: avoid extension of device nodes by absolute pathVladimir Zapolskiy1-116/+110
The change simplifies layout of EA3250 board description by referencing device nodes of LPC32xx controllers by label. No functional change intended. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MICVladimir Zapolskiy1-18/+42
The change adds separate device nodes for SIC1 and SIC2 interrupt controllers and reparents all defined SIC1 and SIC2 interrupt producers to the correspondent interrupt controller, this is needed to perform switching to a new LPC32xx MIC/SIC interrupt controller driver. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-27ARM: dts: at91: sama5d2: add slow clock to watchdog nodeNicolas Ferre1-0/+1
As the watchdog timer needs the slow clock, add it to the currently defined wdt node. Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27ARM: dts: at91: sama5d2: add shutdown controller nodeNicolas Ferre2-0/+18
Add the SAMA5D2-Compatible Shutdown Controller node to sama5d2.dtsi and the use of it in the sama5d2 Xplained board dts file. Enable the RTC wakeup event and the "wake up" button support through the input "0" that is present on the board. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: dts: at91: sama5d4: add watchdog interrupt propertyNicolas Ferre1-0/+1
The "interrupts" property is missing from the watchdog node. Add it with highest priority value of 7. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devicesKrzysztof Kozlowski3-14/+0
There is no external dependency for Security SubSystem (SSS) block so the nodes for Pseudo Random Number Generator and AES hardware acceleration can be enabled always for all Exynos4 devices. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-27ARM: dts: exynos: Add exynos5420-fimd compatibleChanho Park1-0/+1
This patch changes the compatible of Exynos5420 fimd to "exynos5420-fimd". To support MIC bypass from display path, the new compatible is introduced for Exynos5420. Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-27ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from ↵Krzysztof Kozlowski3-21/+0
Exynos5420 boards The bindings like s2mps11,buck6-ramp-enable or s2mps11,buck2-ramp-delay were ignored. They were never parsed by s2mps11 regulator driver. Also the values used in these bindings were equal to default reset values of S2MPS11 device. It is safe to remove them. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-27ARM: dts: imx6: Do not hardcode the CLKO clockFabio Estevam15-15/+15
Using "IMX6QDL_CLK_CKO" for the clock is easier to read instead of the hardcoded clock number. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27ARM: dts: imx6: Add dts for Embest MarS BoardSergio Prado2-0/+404
Embest MarS Board [1] is a multi-core platform based on Freescale i.MX6 Cortex-A9 Dual Core, running up to 1GHz with 1 GB of RAM, 4GB of eMMC and with a 4MB SPI flash. [1] http://www.embest-tech.com/shop/star/marsboard.html Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27ARM: dts: r8a7794: Don't disable referenced optional clocksGeert Uytterhoeven1-2/+0
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27ARM: dts: r8a7793: Don't disable referenced optional clocksGeert Uytterhoeven1-2/+0
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27ARM: dts: r8a7790: Don't disable referenced optional clocksGeert Uytterhoeven1-4/+1
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27ARM: dts: r8a7779: Don't disable referenced optional clocksGeert Uytterhoeven1-1/+0
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27ARM: dts: r8a7778: Don't disable referenced optional clocksGeert Uytterhoeven1-1/+0
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26ARM: dts: add DTS for Baltos IR2110Yegor Yefremov2-0/+72
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: add DTS for Baltos IR3220Yegor Yefremov2-0/+120
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: split am335x-baltos-ir5221 into dts and dtsi filesYegor Yefremov2-386/+409
Introduce am335x-baltos.dtsi, that provides common configuration for the whole device family based on the same SODIMM module. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHzVignesh R2-8/+4
According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better throughput. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: dra7x: Remove QSPI pinmuxVignesh R2-31/+0
DRA7 family of processors from Texas Instruments, have a hardware module called IODELAYCONFIG Module which is expected to be configured. This block allows very specific custom fine tuning for electrical characteristics of IO pins that are necessary for functionality and device lifetime requirements. IODelay module has it's own register space with registers to configure various pins. According to AM572x TRM SPRUHZ6E October 2014–Revised January 2016[1] section 18.4.6.1 Pad Configuration, in addition to pinmuxing(MUXMODE), when operating a pad in certain mode, Virtual/Manual IO Timing Mode must also be configured to ensure that IO timings are met (DELAYMODE and MODESELECT fields of pad's IODELAYCONFIG module register). According to section 18.4.6.1.7 Isolation Requirements of above TRM, when reprogramming MUXMODE, DELAYMODE, and MODESELECT fields, there is a potential for a significant glitch on the corresponding IO. It is hence recommended to do this with I/O isolation (which can only be done in initial stages of bootloader). QSPI is one such module that requires IODELAY configuration. So, this patch removes the pinmux for QSPI for DRA74/DRA72 EVM as it needs to be done in bootloader (U-Boot) and cannot be done in kernel. Users should migrate to U-Boot v2016.05-rc1 or higher. [1] http://www.ti.com/lit/ug/spruhz6e/spruhz6e.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 02:36:06 +0000