summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-02-14of: move definition of of_chosen into common code.Grant Likely4-10/+0
Rather than defining of_chosen in each arch, it can be defined for all in driver/of/base.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14of: remove unused extern reference to devtree_lockGrant Likely2-4/+0
Neither the powerpc nor the microblaze code use devtree_lock anymore. Remove the extern reference. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14of: put default string compare and #a/s-cell values into common headerGrant Likely2-14/+0
Most architectures don't need to change these. Put them into common code to eliminate some duplication Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14of/flattree: Don't assume HAVE_LMBJeremy Kerr2-0/+10
We don't always have lmb available, so make arches provide an early_init_dt_alloc_memory_arch() to handle the allocation of memory in the fdt code. When we don't have lmb.h included, we need asm/page.h for __va. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09of/flattree: endian-convert members of boot_param_headerJeremy Kerr1-1/+1
The boot_param_header has big-endian fields, so change the types to __be32, and perform endian conversion when we access them. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of/flattree: use callback to setup initrd from /chosenJeremy Kerr2-0/+20
At present, the fdt code sets the kernel-wide initrd_start and initrd_end variables when parsing /chosen. On ARM, we only set these once the bootmem has been reserved. This change adds an arch hook to setup the initrd from the device tree: void early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end); The arch-specific code can then setup the initrd however it likes. Compiled on powerpc, with CONFIG_BLK_DEV_INITRD=y and =n. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of/flattree: merge early_init_dt_scan_memory() common codeGrant Likely2-100/+20
Merge common code between PowerPC and Microblaze architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09of: add 'of_' prefix to machine_is_compatible()Grant Likely12-37/+37
machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09of: merge of_find_node_by_phandleJeremy Kerr3-54/+0
Merge common function between powerpc, sparc and microblaze. Code is identical for powerpc and microblaze, but adds a lock (and release) of the devtree_lock on sparc. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of: merge of_attach_node() & of_detach_node()Grant Likely4-126/+0
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09microblaze: remove early_init_dt_scan_cpus() and phyp_dump_*()Grant Likely1-153/+0
Microblaze only has one CPU, it isn't SMP at all. early_init_dt_scan_cpus() is effectively just a no-op, so remove it. Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff can also go. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-01-28Merge commit 'v2.6.33-rc5' into secretlab/test-devicetreeGrant Likely2910-57862/+151463
2010-01-28of: unify phandle name in struct device_nodeGrant Likely11-18/+18
In struct device_node, the phandle is named 'linux_phandle' for PowerPC and MicroBlaze, and 'node' for SPARC. There is no good reason for the difference, it is just an artifact of the code diverging over a couple of years. This patch renames both to simply .phandle. Note: the .node also existed in PowerPC/MicroBlaze, but the only user seems to be arch/powerpc/platforms/powermac/pfunc_core.c. It doesn't look like the assignment between .linux_phandle and .node is significantly different enough to warrant the separate code paths unless ibm,phandle properties actually appear in Apple device trees. I think it is safe to eliminate the old .node property and use phandle everywhere. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28of: Merge of_node_get() and of_node_put()Grant Likely2-147/+0
Merge common code between PowerPC and MicroBlaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28of: merge machine_is_compatible()Grant Likely2-37/+0
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-21Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds3-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: x86: Add support for the ANY bit perf: Change the is_software_event() definition perf: Honour event state for aux stream data perf: Fix perf_event_do_pending() fallback callsite perf kmem: Print usage help for unknown commands perf kmem: Increase "Hit" column length hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change perf timechart: Use tid not pid for COMM change
2010-01-21Merge branch 'release' of ↵Linus Torvalds1-16/+6
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits) ACPI: delete acpi_processor_power_verify_c2() ACPI: allow C3 > 1000usec ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C ACPI: power_meter: remove double kfree() ACPI: processor: restrict early _PDC to opt-in platforms ACPI: Fix unused variable warning in sbs.c acpi: make ACPI device id constant sony-laptop - fix using of uninitialized variable ACPI: Fix section mismatch error for acpi_early_processor_set_pdc() eeepc-laptop: disable wireless hotplug for 1201N eeepc-laptop: add hotplug_disable parameter eeepc-laptop: switch to using sparse keymap library eeepc-laptop: dmi blacklist to disable pci hotplug code eeepc-laptop: disable cpu speed control on EeePC 701 ACPI: don't cond_resched if irq is disabled ACPI: Remove unnecessary cast. ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes ACPI: EC: Add wait for irq storm ACPI: SBS: Move SBS HC callback to faster Notify queue x86, ACPI: delete acpi_boot_table_init() return value ...
2010-01-21Merge branch 'sh/for-2.6.33' of ↵Linus Torvalds5-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh64: wire up sys_accept4. sh: unwire sys_recvmmsg. sh: ms7724: Correct sh-eth EEPROM polling timeout.
2010-01-21Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds12-57/+110
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot() ARM: 5884/1: arm: Fix DCC console for v7 ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels" ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void) ARM: fix badly placed mach/plat entries in Kconfig & Makefile
2010-01-21perf: x86: Add support for the ANY bitStephane Eranian2-0/+8
Propagate the ANY bit into the fixed counter config for v3 and higher. Signed-off-by: Stephane Eranian <eranian@google.com> [a.p.zijlstra@chello.nl: split from larger patch] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20Merge branch 'misc' into releaseLen Brown1-16/+6
2010-01-19ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 ↵Tony Lindgren3-7/+17
and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec workTony Lindgren1-1/+8
The comments in arm_machine_restart() suggest that cpu_proc_fin() will clean and disable cache and turn off interrupts. This does not seem to be implemented for proc-v7.S, implement it the same way as for proc-v6.S. This also makes kexec work for v7. Note that a related TLB and branch traget flush patch is also needed to avoid kexec "crc error". Note that there are still some issues that seem to be related to L2 cache being on and causing occasional uncompress "crc error" with kexec. Anyways, this gets kexec mostly working on V7 for now. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()Tony Lindgren1-0/+2
We need to do that if we tinker with the MMU entries. This fixes the occasional bug with kexec where the new fails to uncompress with "crc error". Most likely at least kexec on v6 and v7 need this fix. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5884/1: arm: Fix DCC console for v7Tony Lindgren3-0/+40
Without this patch arch/arm/compressed/head.S defaults to generic DCC code that does not work for v7. For more information on the v7 DCC, see Cortex-A8 TRM "12.11.1 Debug communications channel". To use it with post 2.6.33-rc1 or later, you need to have: CONFIG_DEBUG_LL=y ONFIG_DEBUG_ICEDCC=y CONFIG_EARLY_PRINTK=y Earlier kernels need commit 93fd03a8c6728b58879f8af20ffd55d9c32a778b backported. Tested on omap3430. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19sh64: wire up sys_accept4.Paul Mundt2-1/+3
sh64 on the other hand provides both direct broken out syscalls as well as socketcall access. As there are binaries that use both socketcall has to stay around. The current ABI prefers direct syscalls. It was pointed out that when sys_recvmmsg was added in, sys_accept4 was overlooked. This takes care of wiring it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: unwire sys_recvmmsg.Paul Mundt2-3/+3
sh32 at the moment only uses sys_socketcall to reach these, so unwire recvmmsg for now. While we're at it, add it to the ignore list, as per the s390 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18x86, apic: use logical flat for systems with <= 8 logical cpusSuresh Siddha2-19/+4
We can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. This has been tested to work on both Intel and AMD platforms. Exceptions like IBM summit platform which can't use logical flat mode are addressed by using OEM platform checks. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Chris McDermott <lcm@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18x86, apic: use physical mode for IBM summit platformsSuresh Siddha1-0/+5
Chris McDermott from IBM confirmed that hurricane chipset in IBM summit platforms doesn't support logical flat mode. Irrespective of the other things like apic_id's, total number of logical cpu's, Linux kernel should default to physical mode for this system. The 32-bit kernel does so using the OEM checks for the IBM summit platform. Add a similar OEM platform check for the 64bit kernel too. Otherwise the linux kernel boot can hang on this platform under certain bios/platform settings. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Chris McDermott <lcm@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds5-5/+20
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: pci_controller->arch_data really is a struct device_node * microblaze: Add missing double apostrophe in Kconfig microblaze: Add PT_ macros for special purpose regs microblaze: Enable accept4 syscall microblaze: Wire up recvmmsg syscall
2010-01-18Merge branch 'merge' of ↵Linus Torvalds70-1171/+3822
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Move cpu hotplug driver lock from pseries to powerpc powerpc: Move /proc/ppc64 to /proc/powerpc update powerpc/8xx: Fix user space TLB walk in dcbX fixup powerpc: Fix decrementer setup on 1GHz boards powerpc/iseries: Initialise on-stack completion powerpc/hvc: Driver build breaks with !HVC_CONSOLE serial/pmac_zilog: Workaround problem due to interrupt on closed port powerpc/macintosh: Make Open Firmware device id constant powerpc: Use helpers for rlimits powerpc: cpumask_of_node() should handle -1 as a node powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE powerpc/pseries: Fix xics interrupt affinity powerpc/swsusp_32: Fix TLB invalidation powerpc/8xx: Always pin kernel instruction TLB powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx powerpc: Use scripts/mkuboot.sh instead of 'mkimage' powerpc/5200: update defconfigs
2010-01-18microblaze: pci_controller->arch_data really is a struct device_node *Michal Simek1-1/+1
we are follow powerpc change: 44ef339073f67d4abcc62ae52a5fbc069d7a4d29 Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18microblaze: Add missing double apostrophe in KconfigMichal Simek1-1/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18microblaze: Add PT_ macros for special purpose regsMichal Simek1-0/+14
PT_ macros are used by gdb and strace uses them too. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18microblaze: Enable accept4 syscallMichal Simek2-2/+2
We had wrong name in unistd.h + I wire up this syscall in syscall table. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18microblaze: Wire up recvmmsg syscallMichal Simek1-1/+2
Patch a2e2725541fad72416326798c2d7fa4dafb7d337 should contain change in unistd.h too. The same problem had MIPS. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels"Rabin Vincent1-9/+0
This reverts commit 14f0aa359365e8a93a77b71e3b840274b9b4dcb1. That commit was needed earlier because system call restarting for OABI (compat) required an executable stack and thus had problems with NX. Since ab72b00734ae4d0b ("ARM: Fix signal restart issues with NX and OABI compat") has reworked the code to not require an executable stack anymore, we can re-enable NX support for kernels with OABI (compat) support. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18ARM: 5882/1: ARM: Fix uncompress code compile for different defines of ↵Tony Lindgren3-3/+6
flush(void) Because of the include of the decompress_inflate.c file from boot/compress/misc.c, there are different flush() defines: In file included from arch/arm/boot/compressed/misc.c:249: arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0 Fix this by removing the define of flush() in misc.c for CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h, and that is being included unconditionally. Also use a static inline function instead of define for mach-mxc and mach-gemini to avoid similar bug for those platforms. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18sh: ms7724: Correct sh-eth EEPROM polling timeout.Kuninori Morimoto1-1/+1
This converts the cpu_relax() to a udelay(1), which fixes up issues with the EEPROM polling occasionally timing out. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-17Merge branch 'for-linus' of ↵Linus Torvalds1-31/+18
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: do_add_mount() should sanitize mnt_flags CIFS shouldn't make mountpoints shrinkable mnt_flags fixes in do_remount() attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared() may_umount() needs namespace_sem Fix configfs leak Fix the -ESTALE handling in do_filp_open() ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path Fix ACC_MODE() for real Unrot uml mconsole a bit hppfs: handle ->put_link() Kill 9p readlink() fix autofs/afs/etc. magic mountpoint breakage
2010-01-17ARM: fix badly placed mach/plat entries in Kconfig & MakefileRussell King2-37/+37
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-17hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference changeLuca Barbieri1-3/+4
Commit 62edab9056a6cf0c9207339c8892c923a5217e45 (from June 2009 but merged in 2.6.33) changes notify_die to pass dr6 by reference. However, it forgets to fix the check for DR_STEP in kmmio.c, breaking mmiotrace. It also passes a wrong value to the post handler. This simple fix makes mmiotrace work again. Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> Acked-by: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1263634770-14578-1-git-send-email-luca@luca-barbieri.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds6-9/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: Ensure hub revision set for all ACPI modes. x86, uv: Add function retrieving node controller revision number x86: xen: 64-bit kernel RPL should be 0 x86: kernel_thread() -- initialize SS to a known state x86/agp: Fix agp_amd64_init and agp_amd64_cleanup x86: SGI UV: Fix mapping of MMIO registers x86: mce.h: Fix warning in header checks
2010-01-16Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Check if /dev/null can be used as the -o gcc argument perf tools: Move QUIET_STDERR def to before first use perf: Stop stack frame walking off kernel addresses boundaries
2010-01-16m68knommu: fix invalid flags on coldfire pit clocksourcejohn stultz1-1/+0
The m68knommu coldfire pit clocksource looks like it was incorrectly marked as a continuous clocksource. Running with it marked as a continuous clocksource could cause hangs when the system switches to highres mode or enables nohz. This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit clocksource. This will disallow systems using this clocksource from entering oneshot mode (disabling highres timers and nohz). Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Steven King <sfking@fdwdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-15Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linuxLinus Torvalds3-20/+21
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: MINI2440: Fixup __initdata usage ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator ARM: S3C: NAND: Check the existence of nr_map before copying
2010-01-15Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-15Merge branch 'for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: cpumask_of_node() should handle -1 as a node alpha: add myself as a maintainer, and drop mention of 2.4
2010-01-15x86, uv: Ensure hub revision set for all ACPI modes.Russ Anderson1-1/+4
Ensure that UV hub revision is set for all ACPI modes. Signed-off-by: Russ Anderson <rja@sgi.com> LKML-Reference: <20100115180908.GB7757@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-15x86, uv: Add function retrieving node controller revision numberJack Steiner2-0/+18
Add function for determining the revision id of the SGI UV node controller chip (HUB). This function is needed in a subsequent patch. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100112210904.GA24546@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 15:18:26 +0000