summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2017-09-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds17-66/+87
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Another round of CR3/PCID related fixes (I think this addresses all but one of the known problems with PCID support), an objtool fix plus a Clang fix that (finally) solves all Clang quirks to build a bootable x86 kernel as-is" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Fix inline asm call constraints for Clang objtool: Handle another GCC stack pointer adjustment bug x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code x86/mm: Factor out CR3-building code
2017-09-24Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds5-25/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull address-limit checking fixes from Ingo Molnar: "This fixes a number of bugs in the address-limit (USER_DS) checks that got introduced in the merge window, (mostly) affecting the ARM and ARM64 platforms" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/syscalls: Move address limit check in loop arm/syscalls: Optimize address limit check Revert "arm/syscalls: Check address limit on user-mode return" syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
2017-09-23Merge branch 'parisc-4.14-2' of ↵Linus Torvalds14-13/+106
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert multiple byte-accesses into one word-access. - Add missing HWPOISON page fault handler code. I completely missed that when I added HWPOISON support during this merge window and it only showed up now with the madvise07 LTP test case. - Fix backtrace unwinding to stop when stack start has been reached. - Issue warning if initrd has been loaded into memory regions with broken RAM modules. - Fix HPMC handler (parisc hardware fault handler) to comply with architecture specification. - Avoid compiler warnings about too large frame sizes. - Minor init-section fixes. * 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Unbreak bootloader due to gcc-7 optimizations parisc: Reintroduce option to gzip-compress the kernel parisc: Add HWPOISON page fault handler code parisc: Move init_per_cpu() into init section parisc: Check if initrd was loaded into broken RAM parisc: Add PDCE_CHECK instruction to HPMC handler parisc: Add wrapper for pdc_instr() firmware function parisc: Move start_parisc() into init section parisc: Stop unwinding at start of stack parisc: Fix too large frame size warnings
2017-09-23x86/asm: Fix inline asm call constraints for ClangJosh Poimboeuf12-42/+39
For inline asm statements which have a CALL instruction, we list the stack pointer as a constraint to convince GCC to ensure the frame pointer is set up first: static inline void foo() { register void *__sp asm(_ASM_SP); asm("call bar" : "+r" (__sp)) } Unfortunately, that pattern causes Clang to corrupt the stack pointer. The fix is easy: convert the stack pointer register variable to a global variable. It should be noted that the end result is different based on the GCC version. With GCC 6.4, this patch has exactly the same result as before: defconfig defconfig-nofp distro distro-nofp before 9820389 9491555 8816046 8516940 after 9820389 9491555 8816046 8516940 With GCC 7.2, however, GCC's behavior has changed. It now changes its behavior based on the conversion of the register variable to a global. That somehow convinces it to *always* set up the frame pointer before inserting *any* inline asm. (Therefore, listing the variable as an output constraint is a no-op and is no longer necessary.) It's a bit overkill, but the performance impact should be negligible. And in fact, there's a nice improvement with frame pointers disabled: defconfig defconfig-nofp distro distro-nofp before 9796316 9468236 9076191 8790305 after 9796957 9464267 9076381 8785949 So in summary, while listing the stack pointer as an output constraint is no longer necessary for newer versions of GCC, it's still needed for older versions. Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-22Merge tag 'pci-v4.14-fixes-2' of ↵Linus Torvalds18-36/+38
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1) (John Keeping) - fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1) (Lorenzo Pieralisi) * tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: endpoint: Use correct "end of test" interrupt MIPS: PCI: Move map_irq() hooks out of initdata
2017-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds3-4/+1
Pull arch/tile fixes from Chris Metcalf: "These are a code cleanup and config cleanup, respectively" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: array underflow in setup_maxnodemem() tile: defconfig: Cleanup from old Kconfig options
2017-09-22Merge tag 'arm64-fixes' of ↵Linus Torvalds3-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - #ifdef CONFIG_EFI around __efi_fpsimd_begin/end - Assembly code alignment reduced to 4 bytes from 16 - Ensure the kernel is compiled for LP64 (there are some arm64 compilers around defaulting to ILP32) - Fix arm_pmu_acpi memory leak on the error path * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf arm64: ensure the kernel is compiled for LP64 arm64: relax assembly code alignment from 16 byte to 4 byte arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels
2017-09-22arch: remove unused *_segments() macros/functionsTobias Klauser10-51/+0
Some architectures define the no-op macros/functions copy_segments, release_segments and forget_segments. These are used nowhere in the tree, so removed them. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-22parisc: Unbreak bootloader due to gcc-7 optimizationsHelge Deller2-2/+3
gcc-7 optimizes the byte-wise accesses of get_unaligned_le32() into word-wise accesses if the 32-bit integer output_len is declared as external. This panics then the bootloader since we don't have the unaligned access fault trap handler installed during boot time. Avoid this optimization by declaring output_len as byte-aligned and thus unbreak the bootloader code. Additionally, compile the boot code optimized for size. Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Reintroduce option to gzip-compress the kernelHelge Deller2-0/+17
By adding the feature to build the kernel as self-extracting executeable, the possibility to simply compress the kernel with gzip was lost. This patch now reintroduces this possibilty again and leaves it up to the user to decide how the kernel should be built. The palo bootloader is able to natively load both formats. Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Add HWPOISON page fault handler codeHelge Deller1-4/+29
Commit 24587380f61d ("parisc: Add MADV_HWPOISON and MADV_SOFT_OFFLINE") added the necessary constants to handle hardware-poisoning. Those were needed to support the page deallocation feature from firmware. But I completely missed to add the relevant fault handler code. This now showed up when I ran the madvise07 testcase from the Linux Test Project, which failed with a kernel BUG at arch/parisc/mm/fault.c:320. With this patch the parisc kernel now behaves like other platforms and gives the same kernel syslog warnings when poisoning pages. Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Move init_per_cpu() into init sectionHelge Deller4-4/+4
Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Check if initrd was loaded into broken RAMHelge Deller1-0/+9
While scanning the PDT for reported broken memory modules, warn if the initrd was coincidentally loaded into bad memory. Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Add PDCE_CHECK instruction to HPMC handlerHelge Deller1-1/+9
According to the programming note at page 1-31 of the PA 1.1 Firmware Architecture document, one should use the PDC_INSTR firmware function to get the instruction that invokes a PDCE_CHECK in the HPMC handler. This patch follows this note and sets the instruction which has been a nop up until now. Testing on a C3000 and C8000 showed that this firmware call isn't implemented on those machines, so maybe it's only needed on older ones. Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Add wrapper for pdc_instr() firmware functionHelge Deller2-0/+21
Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Move start_parisc() into init sectionHelge Deller1-2/+2
Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Stop unwinding at start of stackHelge Deller1-0/+12
Check stack pointer if we are reaching the stack end and stop unwinding if we do. This fixes early backtraces and avoids showing unrealistic call stacks. Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22Merge tag 'for-linus-4.14b-rc2-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A fix for a missing __init annotation and two cleanup patches" * tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen, arm64: drop dummy lookup_address() xen: don't compile pv-specific parts if XEN_PV isn't configured xen: x86: mark xen_find_pt_base as __init
2017-09-22Merge tag 'powerpc-4.14-3' of ↵Linus Torvalds19-56/+77
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "It turns out our single-fix pull from last week was too good to be true. I missed a few fixes in that pull that had already come in because I was on leave, but also we hadn't found the bugs yet. So this week it's a bit bigger, though not ridiculous. Hopefully things will settle down from here on. Four fixes for the new instruction emulation code. A fix for CPU offline on bare metal machines when certain idle states are not supported, and a fix for a device_node refcounting oops during CPU hotplug, caused by recent changes. Going to stable are a fix for an oops during core dump on machines that have TM (Transactional Memory) disabled. Reordering some EEH initialisation to avoid trashing memory, and another device_node refcounting fix. And a few other minor things. Thanks to: Anton Blanchard, Benjamin Herrenschmidt, Cyril Bur, Gautham R. Shenoy, Gustavo Romero, Kamalesh Babulal, Matthew Weber, Matt Weber, Naveen N. Rao, Nicholas Piggin, Pavithra Prakash, Ravi Bangoria, Ronak Desai, Scott Wood, Tyrel Datwyler" * tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix parent_dn reference leak in add_dt_node() powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR powerpc/eeh: Create PHB PEs after EEH is initialized powerpc/kprobes: Update optprobes to use emulate_update_regs() powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline powerpc/sstep: mullw should calculate a 64 bit signed result powerpc/sstep: Fix issues with mcrf powerpc/sstep: Fix issues with set_cr0() powerpc/tm: Flush TM only if CPU has TM feature powerpc/sysrq: Fix oops whem ppmu is not registered powerpc/configs: Update for CONFIG_SND changes powerpc/e6500: Update machine check for L1D cache err
2017-09-22Merge branch '4.14-fixes' of ↵Linus Torvalds27-33/+37
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: - Fix a build error on MSP71xx which used to rely on somehow magically <asm/setup.h> being pulled in which no longer happens. - Fix the __write_64bit_c0_split inline assembler where there was the theoretical possibility of GCC interpret the constraints such that bad code could result. - A __init was causing section mismatch errors on Alchemy. Just to be on the safe side, Manuel's patch does away with all of them. - Fix perf event init. * '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: PCI: fix pcibios_map_irq section mismatch MIPS: Fix input modify in __write_64bit_c0_split() MIPS: MSP71xx: Include asm/setup.h MIPS: Fix perf event init
2017-09-22Merge branch 'for-linus' of ↵Linus Torvalds5-33/+147
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A couple of bug fixes: memory management, perf, cio, dasd and scm_blk. - A larger change in regard to the CPU topology to improve performance for systems running under z/VM or KVM. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/topology: enable / disable topology dynamically s390/topology: alternative topology for topology-less machines s390/mm: fix write access check in gup_huge_pmd() s390/mm: make pmdp_invalidate() do invalidation only s390/cio: recover from bad paths s390/scm_blk: consistently use blk_status_t as error type s390/dasd: fix race during dasd initialization s390/perf: fix bug when creating per-thread event
2017-09-22Merge branch 'linus' of ↵Linus Torvalds12-156/+184
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix compiler warnings in inside-secure - Fix LS1021A support in caam - Avoid using RBP in x86 crypto code - Fix bug in talitos that prevents hashing with algif - Fix bugs talitos hashing code that cause incorrect hash result - Fix memory freeing path bug in drbg - Fix af_alg crash when two SG lists are chained * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - update correct dst SGL entry crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel crypto: inside-secure - fix gcc-4.9 warnings crypto: talitos - Don't provide setkey for non hmac hashing algs crypto: talitos - fix hashing crypto: talitos - fix sha224 crypto: x86/twofish - Fix RBP usage crypto: sha512-avx2 - Fix RBP usage crypto: x86/sha256-ssse3 - Fix RBP usage crypto: x86/sha256-avx2 - Fix RBP usage crypto: x86/sha256-avx - Fix RBP usage crypto: x86/sha1-ssse3 - Fix RBP usage crypto: x86/sha1-avx2 - Fix RBP usage crypto: x86/des3_ede - Fix RBP usage crypto: x86/cast6 - Fix RBP usage crypto: x86/cast5 - Fix RBP usage crypto: x86/camellia - Fix RBP usage crypto: x86/blowfish - Fix RBP usage crypto: drbg - fix freeing of resources
2017-09-21MIPS: PCI: fix pcibios_map_irq section mismatchManuel Lauss24-25/+25
Drop the __init from pcibios_map_irq() to make this section mis- match go away: WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq() The function pcibios_scanbus() references the function __init pcibios_map_irq(). This is often because pcibios_scanbus lacks a __init annotation or the annotation of pcibios_map_irq is wrong. Run-Tested only on Alchemy. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17267/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-21MIPS: Fix input modify in __write_64bit_c0_split()James Hogan1-6/+9
The inline asm in __write_64bit_c0_split() modifies the 64-bit input operand by shifting the high register left by 32, and constructing the full 64-bit value in the low register (even on a 32-bit kernel), so if that value is used again it could cause breakage as GCC would assume the registers haven't changed when they have. To quote the GCC extended asm documentation: > Warning: Do not modify the contents of input-only operands (except for > inputs tied to outputs). The compiler assumes that on exit from the > asm statement these operands contain the same values as they had > before executing the statement. Avoid modifying the input by using a temporary variable as an output which is modified instead of the input and not otherwise used. The asm is always __volatile__ so GCC shouldn't optimise it out. The low register of the temporary output is written before the high register of the input is read, so we have two constraint alternatives, one where both use the same registers (for when the input value isn't subsequently used), and one with an early clobber on the output in case the low output uses the same register as the high input. This allows the resulting assembly to remain mostly unchanged. A diff of a MIPS32r6 kernel reveals only three differences, two in relation to write_c0_r10k_diag() in cpu_probe() (register allocation rearranged slightly but otherwise identical), and one in relation to write_c0_cvmmemctl2() in kvm_vz_local_flush_guesttlb_all(), but the octeon CPU is only supported on 64-bit kernels where __write_64bit_c0_split() isn't used so that shouldn't matter in practice. So there currently doesn't appear to be anything broken by this bug. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17315/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-21MIPS: MSP71xx: Include asm/setup.hArnd Bergmann1-0/+2
msp71xx_defconfig can not be built at the in v4.14-rc1 arch/mips/pmcs-msp71xx/msp_smp.c:72:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration] I don't know what caused the regression, but including the right header is the obvious fix. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17309/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-21powerpc/pseries: Fix parent_dn reference leak in add_dt_node()Tyrel Datwyler1-1/+3
A reference to the parent device node is held by add_dt_node() for the node to be added. If the call to dlpar_configure_connector() fails add_dt_node() returns ENOENT and that reference is not freed. Add a call to of_node_put(parent_dn) prior to bailing out after a failed dlpar_configure_connector() call. Fixes: 8d5ff320766f ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Cc: stable@vger.kernel.org # v3.12+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-21powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPARTyrel Datwyler2-2/+5
Commit 215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node dependency on full path") reworked dlpar_attach_node() to no longer look up the parent node "/cpus", but instead to have the parent node passed by the caller in the function parameter list. As a result dlpar_attach_node() is no longer responsible for freeing the reference to the parent node. However, commit 215ee763f8cb failed to remove the of_node_put(parent) call in dlpar_attach_node(), or to take into account that the reference to the parent in the caller dlpar_cpu_add() needs to be held until after dlpar_attach_node() returns. As a result doing repeated cpu add/remove dlpar operations will eventually result in the following error: OF: ERROR: Bad of_node_put() on /cpus CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1 Call Trace: dump_stack+0x15c/0x1f8 (unreliable) of_node_release+0x1a4/0x1c0 kobject_put+0x1a8/0x310 kobject_del+0xbc/0xf0 __of_detach_node_sysfs+0x144/0x210 of_detach_node+0xf0/0x180 dlpar_detach_node+0xc4/0x120 dlpar_cpu_remove+0x280/0x560 dlpar_cpu_release+0xbc/0x1b0 arch_cpu_release+0x6c/0xb0 cpu_release_store+0xa0/0x100 dev_attr_store+0x68/0xa0 sysfs_kf_write+0xa8/0xf0 kernfs_fop_write+0x2cc/0x400 __vfs_write+0x5c/0x340 vfs_write+0x1a8/0x3d0 SyS_write+0xa8/0x1a0 system_call+0x58/0x6c Fix the issue by removing the of_node_put(parent) call from dlpar_attach_node(), and ensuring that the reference to the parent node is properly held and released by the caller dlpar_cpu_add(). Fixes: 215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node dependency on full path") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> [mpe: Add a comment in the code and frob the change log slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-21powerpc/eeh: Create PHB PEs after EEH is initializedBenjamin Herrenschmidt2-18/+4
Otherwise we end up not yet having computed the right diag data size on powernv where EEH initialization is delayed, thus causing memory corruption later on when calling OPAL. Fixes: 5cb1f8fdddb7 ("powerpc/powernv/pci: Dynamically allocate PHB diag data") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-20s390/topology: enable / disable topology dynamicallyHeiko Carstens1-2/+74
Add a new sysctl file /proc/sys/s390/topology which displays if topology is on (1) or off (0) as specified by the "topology=" kernel parameter. This allows to change topology information during runtime and configuring it via /etc/sysctl.conf instead of using the kernel line parameter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-20s390/topology: alternative topology for topology-less machinesHeiko Carstens2-23/+61
If running on machines that do not provide topology information we currently generate a "fake" topology which defines the maximum distance between each cpu: each cpu will be put into an own drawer. Historically this used to be the best option for (virtual) machines in overcommited hypervisors. For some workloads however it is better to generate a different topology where all cpus are siblings within a package (all cpus are core siblings). This shows performance improvements of up to 10%, depending on the workload. In order to keep the current behaviour, but also allow to switch to the different core sibling topology use the existing "topology=" kernel parameter: Specifying "topology=on" on machines without topology information will generate the core siblings (fake) topology information, instead of the default topology information where all cpus have the maximum distance. On machines which provide topology information specifying "topology=on" does not have any effect. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-20powerpc/kprobes: Update optprobes to use emulate_update_regs()Naveen N. Rao1-1/+3
Optprobes depended on an updated regs->nip from analyse_instr() to identify the location to branch back from the optprobes trampoline. However, since commit 3cdfcbfd32b9d ("powerpc: Change analyse_instr so it doesn't modify *regs"), analyse_instr() doesn't update the registers anymore. Due to this, we end up branching back from the optprobes trampoline to the same branch into the trampoline resulting in a loop. Fix this by calling out to emulate_update_regs() before using the nip. Additionally, explicitly compare the return value from analyse_instr() to 1, rather than just checking for !0 so as to guard against any future changes to analyse_instr() that may result in -1 being returned in more scenarios. Fixes: 3cdfcbfd32b9d ("powerpc: Change analyse_instr so it doesn't modify *regs") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-20Merge branch 'next' of ↵Michael Ellerman1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into fixes Merge one commit from Scott which I missed while away.
2017-09-20crypto: x86/twofish - Fix RBP usageJosh Poimboeuf1-6/+6
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R13 instead of RBP. Both are callee-saved registers, so the substitution is straightforward. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: sha512-avx2 - Fix RBP usageJosh Poimboeuf1-36/+39
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Mix things up a little bit to get rid of the RBP usage, without hurting performance too much. Use RDI instead of RBP for the TBL pointer. That will clobber CTX, so spill CTX onto the stack and use R12 to read it in the outer loop. R12 is used as a non-persistent temporary variable elsewhere, so it's safe to use. Also remove the unused y4 variable. Reported-by: Eric Biggers <ebiggers3@gmail.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/sha256-ssse3 - Fix RBP usageJosh Poimboeuf1-8/+7
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the TBL register, and use RBP to store the pre-aligned stack pointer. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/sha256-avx2 - Fix RBP usageJosh Poimboeuf1-15/+7
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. There's no need to use RBP as a temporary register for the TBL value, because it always stores the same value: the address of the K256 table. Instead just reference the address of K256 directly. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/sha256-avx - Fix RBP usageJosh Poimboeuf1-8/+7
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the TBL register, and use RBP to store the pre-aligned stack pointer. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/sha1-ssse3 - Fix RBP usageJosh Poimboeuf1-6/+5
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the REG_D register, and use RBP to store the pre-aligned stack pointer. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/sha1-avx2 - Fix RBP usageJosh Poimboeuf1-3/+1
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R11 instead of RBP. Since R11 isn't a callee-saved register, it doesn't need to be saved and restored on the stack. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/des3_ede - Fix RBP usageJosh Poimboeuf1-6/+9
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use RSI instead of RBP for RT1. Since RSI is also used as a the 'dst' function argument, it needs to be saved on the stack until the argument is needed. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/cast6 - Fix RBP usageJosh Poimboeuf1-16/+34
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R15 instead of RBP. R15 can't be used as the RID1 register because of x86 instruction encoding limitations. So use R15 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/cast5 - Fix RBP usageJosh Poimboeuf1-17/+30
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R15 instead of RBP. R15 can't be used as the RID1 register because of x86 instruction encoding limitations. So use R15 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/camellia - Fix RBP usageJosh Poimboeuf1-13/+13
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R12 instead of RBP. Both are callee-saved registers, so the substitution is straightforward. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20crypto: x86/blowfish - Fix RBP usageJosh Poimboeuf1-22/+26
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R12 instead of RBP. R12 can't be used as the RT0 register because of x86 instruction encoding limitations. So use R12 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Eric Biggers <ebiggers@google.com> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-20MIPS: Fix perf event initPaul Burton1-2/+1
Commit c311c797998c ("cpumask: make "nr_cpumask_bits" unsigned") modified mipspmu_event_init() to cast the struct perf_event cpu field to an unsigned integer before it is compared with nr_cpumask_bits (and *ahem* did so without copying the linux-mips mailing list or any MIPS developers...). This is broken because the cpu field may be -1 for events which follow a process rather than being affine to a particular CPU. When this is the case the cast to an unsigned int results in a value equal to ULONG_MAX, which is always greater than nr_cpumask_bits so we always fail mipspmu_event_init() and return -ENODEV. The check against nr_cpumask_bits seems nonsensical anyway, so this patch simply removes it. The cpu field is going to either be -1 or a valid CPU number. Comparing it with nr_cpumask_bits is effectively checking that it's a valid cpu number, but it seems safe to rely on the core perf events code to ensure that's the case. The end result is that this fixes use of perf on MIPS when not constraining events to a particular CPU, and fixes the "perf list hw" command which fails to list any events without this. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: c311c797998c ("cpumask: make "nr_cpumask_bits" unsigned") Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> # v4.12+ Patchwork: https://patchwork.linux-mips.org/patch/17323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-20powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offlineGautham R. Shenoy1-1/+7
Commit 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug") clears the PECE1 bit of the LPCR via stop-api during CPU-Hotplug to prevent wakeup due to a decrementer on an offlined CPU which is in a deep stop state. In the case where the stop-api support is found to be lacking, the commit 785a12afdb4a ("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails") disables deep states that lose hypervisor context. Thus in this case, the offlined CPU will be put to some shallow idle state. However, we currently unconditionally clear the PECE1 in LPCR via stop-api during CPU-Hotplug even when deep states are disabled due to stop-api failure. Fix this by clearing PECE1 of LPCR via stop-api during CPU-Hotplug *only* when the offlined CPU will be put to a deep state that loses hypervisor context. Fixes: 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug") Reported-by: Pavithra Prakash <pavirampu@linux.vnet.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-20powerpc/sstep: mullw should calculate a 64 bit signed resultAnton Blanchard1-2/+3
mullw should do a 32 bit signed multiply and create a 64 bit signed result. It currently truncates the result to 32 bits. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-20powerpc/sstep: Fix issues with mcrfAnton Blanchard1-2/+2
mcrf broke when we changed analyse_instr() to not modify the register state. The instruction writes to the CR, so we need to store the result in op->ccval, not op->val. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-20powerpc/sstep: Fix issues with set_cr0()Anton Blanchard1-7/+7
set_cr0() broke when we changed analyse_instr() to not modify the register state. Instead of looking at regs->gpr[x] which has not been updated yet, we need to look at op->val. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-20powerpc/tm: Flush TM only if CPU has TM featureGustavo Romero1-1/+1
Commit cd63f3c ("powerpc/tm: Fix saving of TM SPRs in core dump") added code to access TM SPRs in flush_tmregs_to_thread(). However flush_tmregs_to_thread() does not check if TM feature is available on CPU before trying to access TM SPRs in order to copy live state to thread structures. flush_tmregs_to_thread() is indeed guarded by CONFIG_PPC_TRANSACTIONAL_MEM but it might be the case that kernel was compiled with CONFIG_PPC_TRANSACTIONAL_MEM enabled and ran on a CPU without TM feature available, thus rendering the execution of TM instructions that are treated by the CPU as illegal instructions. The fix is just to add proper checking in flush_tmregs_to_thread() if CPU has the TM feature before accessing any TM-specific resource, returning immediately if TM is no available on the CPU. Adding that checking in flush_tmregs_to_thread() instead of in places where it is called, like in vsr_get() and vsr_set(), is better because avoids the same problem cropping up elsewhere. Cc: stable@vger.kernel.org # v4.13+ Fixes: cd63f3c ("powerpc/tm: Fix saving of TM SPRs in core dump") Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>