summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-03-17Merge tag 'omap-for-v3.15/dt-overo-signed' of ↵Arnd Bergmann88-447/+1436
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Updates to the .dts files to support more Gumstix boards. These are sent separately from the rest of the .dts changes as these depend on the fixes merged into v3.14-rc4, and needed a bit more time to get updated on the fixes. * tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add support for the Overo Summit ARM: dts: Add support for the Overo Chestnut43 ARM: dts: Add support for the Overo Alto35 ARM: dts: Add support for the Overo Gallop43 ARM: dts: Add support for the Overo Palo43 ARM: dts: overo: Add LIS33DE accelerometer ARM: dts: overo: Create a file for common Gumstix peripherals ARM: dts: overo: Push uart3 pinmux down to expansion board ARM: dts: omap3-tobi: Add AT24C01 EEPROM ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221 ARM: dts: omap: Add common file for SMSC9221 ARM: dts: omap3-overo: Add HSUSB PHY ARM: dts: omap3-overo: Enable WiFi/BT combo ARM: dts: omap3-overo: Add missing pinctrl ARM: dts: omap3-tobi: Add missing pinctrl ARM: dts: overo: reorganize include files Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: arch/arm/boot/dts/omap3-overo.dtsi
2014-03-17Merge tag 'omap-for-v3.15/dt-part3' of ↵Arnd Bergmann11-15/+197
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "omap device tree changes for v3.15, part 3" from Tony Lindgren: Device tree related changes to the omap iommu driver as that is finally getting updated. Also few trivial board related .dts updates to add more devices. * tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530 ARM: dts: am335x-evmsk: enable DMA controller for USB ARM: dts: OMAP5: Add IOMMU nodes ARM: dts: OMAP4: Add IOMMU nodes ARM: dts: OMAP3: Add IVA IOMMU node ARM: dts: OMAP3: Update ISP IOMMU node ARM: OMAP2+: extend iommu pdata-quirks to OMAP5 ARM: OMAP5: hwmod data: add mmu data for ipu & dsp ARM: OMAP2+: use pdata quirks for iommu reset lines ARM: OMAP2+: change the ISP device archdata MMU name for DT ARM: OMAP3: fix iva mmu programming issues ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux into next/dtArnd Bergmann21-5/+912
Pull "Allwinner DT additions for 3.15, take 2" from Maxime Ripard: - Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME - Addition of the I2C for the A31 - Addition USB Host mode for the A10, A10s, A13 and A20 - Addition of SATA support for the A10 and A20 - Change of compatible for the watchdog * tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux: (23 commits) ARM: sunxi: dt: Update the watchdog compatibles ARM: sun6i: colombus: Enable the I2C controllers ARM: sun6i: Enable the I2C muxing options ARM: sun6i: Enable the I2C controllers ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts ARM: sun7i: dt: Add USB host nodes to cubietruck dts ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino ARM: sun4i: dt: Add USB host nodes to pcduino.dts ARM: sun4i: dt: Add USB host nodes to mini-xplus dts ARM: sun4i: dt: Add USB host nodes to hackberry dts ARM: sun4i: dt: Add USB host nodes to cubieboard dts ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts ARM: sun7i: dt: Add USB host bindings ARM: sun5i: dt: Add USB host bindings ARM: sun4i: dt: Add USB host bindings ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann9-42/+33
Merge "First batch of AT91 DT material for 3.15" from Nicolas Ferre: - activate DMA for NAND flash controller - some binding documentation update for usba and ADC (iio) drivers - removal of some deprecated ADC (iio) properties * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91/dt: at91-cosino: remove useless adc properties ARM: at91/dt: sama5d3: remove useless adc properties ARM: at91/dt: at91sam9x5: remove useless adc properties ARM: at91/dt: at91sam9g45: remove useless adc properties ARM: at91/dt: at91sam9260: remove useless adc properties ARM: at91/dt: at91-ariag25: remove useless adc properties Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt Documentation: dt: iio: improve atmel-adc documentation ARM: at91: sama5d3: get rid of atmel_tsadcc driver ARM: at91/DT: atmel_usba correct atmel,vbus-gpio meaning ARM: at91/DT: add NAND + DMA property Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann2-0/+46
Merge "mvebu dt changes for v3.15 (incremental #5)" from Jason Cooper: - mvebu - 38x - add 2GHz fixed clock, core divider clock, and nand controller - 385 - add nand controller and partitions to 385-DB board * tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann8-21/+144
Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper: - dove - add system controller node - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI - mvebu - XP/370 - change default PCIe apertures - switch GP and DB boards internal registers to 0xf1000000 - correct RAM size on Matrix board - 385 - correct phy connection type for DB board - add RD board * tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu: ARM: dove: drop pinctrl PMU reg property ARM: mvebu: add Device Tree for the Armada 385 RD board ARM: mvebu: use the correct phy connection mode on Armada 385 DB ARM: mvebu: the Armada XP Matrix board has 4 GB ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000 ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000 ARM: mvebu: change the default PCIe apertures for Armada 370/XP ARM: dove: add system controller node Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge branch 'mvebu/soc3' into next/dtArnd Bergmann30-154/+786
The dts Makefile has a bunch of nasty conflicts, attempt to resolve these now to avoid trouble later. Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann28-25/+3180
Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'efm32-next' of git://git.pengutronix.de/git/ukl/linux into next/dtArnd Bergmann2-3/+3
Merge "Two more dt related efm32 fixes" from Uwe Kleine-König: * tag 'efm32-next' of git://git.pengutronix.de/git/ukl/linux: ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge branch 'efm32/cleanup' into next/dtArnd Bergmann69-709/+99
Dependency for efm32/dt branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17Merge tag 'renesas-dt4-for-v3.15' of ↵Olof Johansson4-5/+227
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Fourth Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman: * r8a7791 (R-Car M2) based koelsch board - Add SDHI devices - Add ethernet * r8a7791 (R-Car M2) SoC - Correct clock index for i2c5 * r8a7790 (R-Car H2) based lager board - Add ethernet * tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Add SDHI devices for Koelsch DTS ARM: shmobile: Add SDHI devices to r8a7791 DTSI ARM: shmobile: r8a7791: fix clock index for i2c5 ARM: shmobile: koelsch: add Ether DT support ARM: shmobile: r8a7791: add Ether DT support ARM: shmobile: lager: add Ether DT support ARM: shmobile: r8a7790: add Ether DT support Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-17Merge tag 'renesas-dt3-for-v3.15' of ↵Olof Johansson7-103/+315
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman: * r7s72100 SoC (RZ/A1H) - Add nodes for i2c controllers to DT * r7s72100 (RZ/A1H) based Genmai board - genmai: adapt dts to use native i2c driver * r8a7791 SoC (R-Car M2) - Remove superfluous interrupt-parents * r8a7791 (R-Car M2) based Koelsch board - Add i2c2 bus to DT - Add DU device to DT * r8a7790 SoC (R-Car H2) - Add i2c aliases - Remove superfluous interrupt-parents - Add QSPI node * r8a7790 SoC (R-Car M2) based Lager - Add DU, SDHI0/1 and QSPI to DT * r8a7778 SoC (R-Car M1) - Remove duplicate i2c nodes * tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: genmai: adapt dts to use native i2c driver ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt ARM: shmobile: r8a7791: add i2c master nodes to dtsi ARM: shmobile: r8a7790: add i2c aliases to dtsi ARM: shmobile: r8a7790: remove superfluous interrupt-parents ARM: shmobile: r8a7791: remove superfluous interrupt-parents ARM: shmobile: koelsch-reference: Add DU device to DTS ARM: shmobile: lager: Add DU device to DTS ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes ARM: shmobile: lager: add SDHI0/2 support on DTS ARM: shmobile: lager dts: Add QSPI nodes ARM: shmobile: r8a7790 dtsi: Add QSPI node Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-14ARM: efm32: properly namespace i2c location propertyUwe Kleine-König1-1/+1
Wolfram Sang pointed out during review of an efm32-i2c driver that the property to specify the set of pins has a too general name. As several other efm32 peripherals also have a similar register bit field, add an "efm32" namespace. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2014-03-14ARM: efm32: fix unit address part in USART2 device nodes' namesUwe Kleine-König1-2/+2
While removing the 0x prefixes in the unit addresses in reply to a review comment, I must somehow have messed up these two. Uups. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2014-03-13ARM: mvebu: Enable NAND controller in Armada 385-DBEzequiel Garcia1-0/+21
The Armada 385-DB board has a NAND flash, so enable it in the devicetree and add the partitions as prepared in the factory images. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-6-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: mvebu: Add support for NAND controller in Armada 38x SoCEzequiel Garcia1-0/+10
The Armada 38x SoC family has a NAND controller, compatible with the controller in Armada 370/375/XP SoCs. Add support for it in the devicetree file. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-5-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: mvebu: Add the Core Divider clock to Armada 38x SoCsEzequiel Garcia1-0/+8
The Armada 38x SoC family has a clock provider called "Core Divider", derived from the fixed 2 GHz main PLL clock. This is similar to the one on A370, A375 and AXP. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-4-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCsEzequiel Garcia1-0/+7
Armada 38x SoCs have a 2 GHz fixed main PLL that is used to feed other clocks. This commit adds a DT representation of this clock through a fixed-clock compatible node. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-3-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: sunxi: dt: Update the watchdog compatiblesMaxime Ripard5-5/+5
The watchdog compatibles were following a different pattern than the one found in the other devices. Now that the driver supports the right pattern, switch to it in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-12ARM: at91/dt: at91-cosino: remove useless adc propertiesAlexandre Belloni2-2/+0
Remove the properties that are not used anymore by the at91_adc driver. Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: sama5d3: remove useless adc propertiesAlexandre Belloni2-7/+7
Remove the properties that are not used anymore by the at91_adc driver and fix the atmel,adc-use-external-triggers property name. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: at91sam9x5: remove useless adc propertiesAlexandre Belloni1-6/+7
Remove the properties that are not used anymore by the at91_adc driver and fix the atmel,adc-use-external-triggers property name. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: at91sam9g45: remove useless adc propertiesAlexandre Belloni1-5/+6
Remove the properties that are not used anymore by the at91_adc driver. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: at91sam9260: remove useless adc propertiesAlexandre Belloni1-5/+6
Remove the properties that are not used anymore by the at91_adc driver. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: at91-ariag25: remove useless adc propertiesAlexandre Belloni1-1/+0
Remove the properties that are not used anymore by the at91_adc driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530Stefan Roese1-0/+36
Add support for the MMC2/SDIO WiFi Libertas (Marvell) module available on the CM-T3530 SOM. Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: am335x-evmsk: enable DMA controller for USBYegor Yefremov1-0/+4
Enable DMA controller for USB Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: Add support for the Overo SummitFlorian Vaussard4-0/+93
Summit is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: Add support for the Overo Chestnut43Florian Vaussard4-0/+147
Chestnut43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: Add support for the Overo Alto35Florian Vaussard4-0/+122
Alto35 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: Add support for the Overo Gallop43Florian Vaussard4-0/+135
Gallop43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: Add support for the Overo Palo43Florian Vaussard4-0/+131
Palo43 is an expansion board for Gumstix Overo products. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: overo: Add LIS33DE accelerometerFlorian Vaussard2-0/+48
The LIS33DE accelerometer is used on several Gumstix expansion boards, thus add the DT node to omap3-overo-common-peripherals.dtsi. For the boards that do not have the accelerometer (like Tobi), mark the status as disabled. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: overo: Create a file for common Gumstix peripheralsFlorian Vaussard2-38/+52
Gumstix expansion boards share a couple of peripherals: - uart3 is used for the console - AT24C01 EEPROM on i2c3 Use this file for overo-tobi. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: overo: Push uart3 pinmux down to expansion boardFlorian Vaussard2-11/+13
UART3 is used by expansion boards to get a tty console. Thus, the pinmux should be defined by expansion boards, instead of being imposed by the processor board. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-tobi: Add AT24C01 EEPROMFlorian Vaussard1-0/+7
Add the AT24C01 EEPROM node populated on most Gumstix expansion board. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221Florian Vaussard1-39/+3
Use the timings provided by omap-gpmc-smsc9221. This does not change the timings, but it avoids code duplication. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap: Add common file for SMSC9221Florian Vaussard1-0/+58
Some devices (SMSC9217, SMSC9218 and SMSC9221 at least) have better timings, allowing a higher transfer speed. Create a common file with these timings. Performance results with iperf: - omap-gpmc-smsc911x.dtsi => 54.9 Mbps - omap-gpmc-smsc9221.dtsi => 92.7 Mbps Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-overo: Add HSUSB PHYFlorian Vaussard3-0/+76
Add the High-Speed USB PHY. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-overo: Enable WiFi/BT comboFlorian Vaussard3-0/+88
MMC2 is used by the on-board WiFi module populated on some boards (based on Marvell Libertas 8688 SDIO). The Bluetooth is connected to UART2. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-overo: Add missing pinctrlFlorian Vaussard1-9/+31
Add missing pinctrl entries for: - i2c1 - mmc1 Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-tobi: Add missing pinctrlFlorian Vaussard1-0/+11
Add missing pinctrl entries: - i2c3 Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: overo: reorganize include filesFlorian Vaussard6-90/+110
Currently, overo-related include files are organized as follow: omap3-overo.dtsi | | omap34xx.dtsi omap3-overo-tobi-common.dtsi omap36xx.dtsi | | | | --------------- --------------- | | omap3-overo-tobi.dts omap3-overo-storm-tobi.dts This is unpractical when one has to deal with SoC-specific pinmux belonging to the omap3_pmx_core2 (defined in omap34xx/omap36xx), for pins related to the processor board. With the current hierarchy, such pinmux has to be defined in the expansion board's .dts, which is not logical. This patches reorganizes the files to add (yet another) abstraction layer between the processor and the expansion boards. omap34xx.dtsi omap3-overo-base.dtsi omap36xx.dtsi | | | | --------------- --------------- | | omap3-overo.dtsi omap3-overo-storm.dtsi | | -------- ------ | omap3-overo-tobi-common.dtsi | | | | | --------------- --------------- | | omap3-overo-tobi.dts omap3-overo-storm-tobi.dts Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: OMAP5: Add IOMMU nodesSuman Anna1-0/+15
The IOMMU DT nodes have been added for the DSP and IPU subsystems. The MMUs in OMAP5 are identical to those in OMAP4, including the bus error back capability on IPU. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: OMAP4: Add IOMMU nodesFlorian Vaussard1-0/+15
Add the IOMMU nodes for the DSP and IPU subsystems. The MMU within the IPU sub-system also supports a bus error back capability, not available on the DSP MMU. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> [s-anna@ti.com: IPU bus error back addition] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: OMAP3: Add IVA IOMMU nodeFlorian Vaussard1-0/+8
Add the DT node for the IOMMU within the DSP subsystem. The entry is disabled to keep in line with the hwmod usage as intended by the deprecated CONFIG_OMAP_IOMMU_IVA2 flag. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> [s-anna@ti.com: split the entry and disable the node] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: OMAP3: Update ISP IOMMU nodeFlorian Vaussard1-3/+4
Update the IOMMU node for the camera subsystem as per the OMAP IOMMU bindings. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> [s-anna@ti.com: corrected interrupt number] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: OMAP2+: extend iommu pdata-quirks to OMAP5Suman Anna1-0/+4
OMAP5 has the same iommus as OMAP4, so extend the OMAP4 iommu pdata quirks for OMAP5 as well. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: OMAP5: hwmod data: add mmu data for ipu & dspSuman Anna1-0/+83
A new MMU hwmod class and data structures are created to represent the MMUs within the IPU and DSP processor subsystems in OMAP5. The MMUs in OMAP5 are identical to those in OMAP4. Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: OMAP2+: use pdata quirks for iommu reset linesSuman Anna1-0/+20
The OMAP iommu driver performs the reset management for the iommu instances in processor sub-systems using the omap_device API which are currently supplied as platform data ops. Use pdata quirks to maintain the functionality as the OMAP iommu driver gets converted to use DT nodes, until the reset portions are decoupled from omap_hwmod/omap_device into a separate reset driver. This patch adds the pdata quirks for the reset management of iommus within the DSP (OMAP3 & OMAP4) and IPU subsystems (OMAP4). Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 20:14:06 +0000