summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-12-27riscv: export flush_icache_all to modulesOlof Johansson1-0/+1
This is needed by LKDTM (crash dump test module), it calls flush_icache_range(), which on RISC-V turns into flush_icache_all(). On other architectures, the actual implementation is exported, so follow that precedence and export it here too. Fixes build of CONFIG_LKDTM that fails with: ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined! Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: reject invalid syscalls below -1David Abdurachmanov1-0/+1
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops with "Unable to handle kernel paging request at virtual address" message. This happens when enosys stressor starts testing random non-valid syscalls. I forgot to redirect any syscall below -1 to sys_ni_syscall. With the patch kernel oops messages are gone while running stress-ng enosys stressor. Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: fix compile failure with EXPORT_SYMBOL() & !MMULuc Van Oostenryck2-3/+4
When support for !MMU was added, the declaration of __asm_copy_to_user() & __asm_copy_from_user() were #ifdefed out hence their EXPORT_SYMBOL() give an error message like: .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here Since these symbols are not defined with !MMU it's wrong to export them. Same for __clear_user() (even though this one is also declared in include/asm-generic/uaccess.h and thus doesn't give an error message). Fix this by doing the EXPORT_SYMBOL() directly where these symbols are defined: inside lib/uaccess.S itself. Fixes: 6bd33e1ece52 ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU") Reported-by: kbuild test robot <lkp@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-12/+39
Pull KVM fixes from Paolo Bonzini: "PPC: - Fix a bug where we try to do an ultracall on a system without an ultravisor KVM: - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups MIPS: - Now orphan, James Hogan is stepping down x86: - MAINTAINERS change, so long Radim and thanks for all the fish - supported CPUID fixes for AMD machines without SPEC_CTRL" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MAINTAINERS: remove Radim from KVM maintainers MAINTAINERS: Orphan KVM for MIPS kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor KVM: arm/arm64: Properly handle faulting of device mappings KVM: arm64: Ensure 'params' is initialised when looking up sys register KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region KVM: arm64: Don't log IMP DEF sysreg traps KVM: arm64: Sanely ratelimit sysreg messages KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create() KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy() KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()
2019-12-22Merge tag 'riscv/for-v5.5-rc3' of ↵Linus Torvalds5-198/+23
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-6/+7
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-22Merge tag 'kvm-ppc-fixes-5.5-1' of ↵Paolo Bonzini55-640/+2421
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.5 - Fix a bug where we try to do an ultracall on a system without an ultravisor.
2019-12-21Merge tag 's390-5.5-4' of ↵Linus Torvalds6-11/+32
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix unwinding from irq context of interrupted user process. - Add purgatory build missing symbols check. That helped to uncover and fix missing symbols when built with kasan support enabled. - Couple of ftrace fixes. Avoid broken stack trace and fix recursion loop in function_graph tracer. * tag 's390-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace: save traced function caller s390/unwind: stop gracefully at user mode pt_regs in irq stack s390/purgatory: do not build purgatory with kcov, kasan and friends s390/purgatory: Make sure we fail the build if purgatory has missing symbols s390/ftrace: fix endless recursion in function_graph tracer
2019-12-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-9/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: a BTS fix, a PT NMI handling fix, a PMU sysfs fix and an SRCU annotation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Add SRCU annotation for pmus list walk perf/x86/intel: Fix PT PMI handling perf/x86/intel/bts: Fix the use of page_private() perf/x86: Fix potential out-of-bounds access
2019-12-21Merge tag 'kbuild-fixes-v5.5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix warning in out-of-tree 'make clean' - add READELF variable to the top Makefile - fix broken builds when LINUX_COMPILE_BY contains a backslash - fix build warning in kallsyms - fix NULL pointer access in expr_eq() in Kconfig - fix missing dependency on rsync in deb-pkg build - remove ---help--- from documentation - fix misleading documentation about directory descending * tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: clarify the difference between obj-y and obj-m w.r.t. descending kconfig: remove ---help--- from documentation scripts: package: mkdebian: add missing rsync dependency kconfig: don't crash on NULL expressions in expr_eq() scripts/kallsyms: fix offset overflow of kallsyms_relative_base mkcompile_h: use printf for LINUX_COMPILE_BY mkcompile_h: git rid of UTS_TRUNCATE from LINUX_COMPILE_{BY,HOST} x86/boot: kbuild: allow readelf executable to be specified kbuild: fix 'No such file or directory' warning when cleaning
2019-12-21Merge branch 'parisc-5.5-2' of ↵Linus Torvalds5-10/+11
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pul parisc fixes from Helge Deller: "Two build error fixes, one for the soft_offline_page() parameter change and one for a specific KEXEC/KEXEC_FILE configuration, as well as a compiler and a linker warning fix" * 'parisc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix compiler warnings in debug_core.c parisc: soft_offline_page() now takes the pfn parisc: add missing __init annotation parisc: fix compilation when KEXEC=n and KEXEC_FILE=y
2019-12-21Merge tag 'powerpc-5.5-4' of ↵Linus Torvalds10-20/+47
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two weeks worth of accumulated fixes: - A fix for a performance regression seen on PowerVM LPARs using dedicated CPUs, caused by our vcpu_is_preempted() returning true even for idle CPUs. - One of the ultravisor support patches broke KVM on big endian hosts in v5.4. - Our KUAP (Kernel User Access Prevention) code missed allowing access in __clear_user(), which could lead to an oops or erroneous SEGV when triggered via PTRACE_GETREGSET. - Two fixes for the ocxl driver, an open/remove race, and a memory leak in an error path. - A handful of other small fixes. Thanks to: Andrew Donnellan, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Hildenbrand, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Ihor Pasichnyk, Juri Lelli, Marcus Comstedt, Mike Rapoport, Parth Shah, Srikar Dronamraju, Vaidyanathan Srinivasan" * tag 'powerpc-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix regression on big endian hosts powerpc: Fix __clear_user() with KUAP enabled powerpc/pseries/cmm: fix managed page counts when migrating pages between zones powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk() ocxl: Fix potential memory leak on context creation powerpc/irq: fix stack overflow verification powerpc: Ensure that swiotlb buffer is allocated from low memory powerpc/shared: Use static key to detect shared processor powerpc/vcpu: Assume dedicated processors as non-preempt ocxl: Fix concurrent AFU open and device removal
2019-12-21Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS fixes from Borislav Petkov: "Three urgent RAS fixes for the AMD side of things: - initialize struct mce.bank so that calculated error severity on AMD SMCA machines is correct - do not send IPIs early during bank initialization, when interrupts are disabled - a fix for when only a subset of MCA banks are enabled, which led to boot hangs on some new AMD CPUs" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix possibly incorrect severity calculation on AMD x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[] x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()
2019-12-20Merge tag 'arm64-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Leftover put_cpu() in the perf/smmuv3 error path. - Add Hisilicon TSV110 to spectre-v2 safe list * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list perf/smmuv3: Remove the leftover put_cpu() in error path
2019-12-20parisc: Fix compiler warnings in debug_core.cHelge Deller1-2/+8
Fix this compiler warning: kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’: arch/parisc/include/asm/cmpxchg.h:48:3: warning: value computed is not used [-Wunused-value] 48 | ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) arch/parisc/include/asm/atomic.h:78:30: note: in expansion of macro ‘xchg’ 78 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) | ^~~~ kernel/debug/debug_core.c:596:4: note: in expansion of macro ‘atomic_xchg’ 596 | atomic_xchg(&kgdb_active, cpu); | ^~~~~~~~~~~ Signed-off-by: Helge Deller <deller@gmx.de>
2019-12-20parisc: soft_offline_page() now takes the pfnHelge Deller1-2/+1
Switch page deallocation table (pdt) driver to use pfn instead of a page pointer in soft_offline_page(). Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn") Signed-off-by: Helge Deller <deller@gmx.de>
2019-12-20arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe listWei Li1-0/+1
HiSilicon Taishan v110 CPUs didn't implement CSV2 field of the ID_AA64PFR0_EL1, but spectre-v2 is mitigated by hardware, so whitelist the MIDR in the safe list. Signed-off-by: Wei Li <liwei391@huawei.com> [hanjun: re-write the commit log] Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-20riscv: move sifive_l2_cache.c to drivers/socChristoph Hellwig2-179/+0
The sifive_l2_cache.c is in no way related to RISC-V architecture memory management. It is a little stub driver working around the fact that the EDAC maintainers prefer their drivers to be structured in a certain way that doesn't fit the SiFive SOCs. Move the file to drivers/soc and add a Kconfig option for it, as well as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE. Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Borislav Petkov <bp@suse.de> [paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20riscv: define vmemmap before pfn_to_page callsDavid Abdurachmanov1-17/+21
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused by NOMMU changes which moved vmemmap definition bellow functions definitions calling pfn_to_page & page_to_pfn. Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV. v2: - Add a comment for vmemmap in source Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 6bd33e1ece52 ("riscv: add nommu support") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20riscv: fix scratch register clearing in M-mode.Greentime Hu1-1/+1
This patch fixes that the sscratch register clearing in M-mode. It cleared sscratch register in M-mode, but it should clear mscratch register. That will cause kernel trap if the CPU core doesn't support S-mode when trying to access sscratch. Fixes: 9e80635619b5 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20riscv: Fix use of undefined config option CONFIG_CONFIG_MMUAndreas Schwab1-1/+1
In Kconfig files, config options are written without the CONFIG_ prefix. Fixes: 6bd33e1ece52 ("riscv: add nommu support") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-18s390/ftrace: save traced function callerVasily Gorbik1-0/+1
A typical backtrace acquired from ftraced function currently looks like the following (e.g. for "path_openat"): arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15a/0x3b8 ftrace_graph_caller+0x0/0x1c 0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8) do_open_execat+0x70/0x1b8 __do_execve_file.isra.0+0x7d8/0x860 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Note random "0x3e0007e3c98" stack value as ftraced function caller. This value causes either imprecise unwinder result or unwinding failure. That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which it haven't had a chance to initialize since the very first instruction calls ftrace code ("ftrace_caller"). (ftraced function might never save r14 as well). Nevertheless according to s390 ABI any function is called with stack frame allocated for it and r14 contains return address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller". So, to fix this issue simply always save traced function caller onto ftraced function stack frame. Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/unwind: stop gracefully at user mode pt_regs in irq stackVasily Gorbik1-4/+11
Consider reaching user mode pt_regs at the bottom of irq stack graceful unwinder termination. This is the case when irq/mcck/ext interrupt arrives while in user mode. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/purgatory: do not build purgatory with kcov, kasan and friendsChristian Borntraeger2-2/+7
the purgatory must not rely on functions from the "old" kernel, so we must disable kasan and friends. We also need to have a separate copy of string.c as the default does not build memcmp with KASAN. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/purgatory: Make sure we fail the build if purgatory has missing symbolsHans de Goede2-3/+11
Since we link purgatory with -r aka we enable "incremental linking" no checks for unresolved symbols are done while linking the purgatory. This commit adds an extra check for unresolved symbols by calling ld without -r before running objcopy to generate purgatory.ro. This will help us catch missing symbols in the purgatory sooner. Note this commit also removes --no-undefined from LDFLAGS_purgatory as that has no effect. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/lkml/20191212205304.191610-1-hdegoede@redhat.com Tested-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/ftrace: fix endless recursion in function_graph tracerSven Schnelle1-2/+2
The following sequence triggers a kernel stack overflow on s390x: mount -t tracefs tracefs /sys/kernel/tracing cd /sys/kernel/tracing echo function_graph > current_tracer [crash] This is because preempt_count_{add,sub} are in the list of traced functions, which can be demonstrated by: echo preempt_count_add >set_ftrace_filter echo function_graph > current_tracer [crash] The stack overflow happens because get_tod_clock_monotonic() gets called by ftrace but itself calls preempt_{disable,enable}(), which leads to a endless recursion. Fix this by using preempt_{disable,enable}_notrace(). Fixes: 011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18Merge tag 'kvmarm-fixes-5.5-1' of ↵Paolo Bonzini25-109/+400
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for .5.5, take #1 - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups
2019-12-18kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBDJim Mattson1-1/+2
The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.80000008H:EBX.AMD_SSBD[bit 24] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 4c6903a0f9d76 ("KVM: x86: fix reporting of AMD speculation bug CPUID leaf") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBDJim Mattson1-1/+2
The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisorPaul Mackerras1-1/+2
Commit 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") added a call to uv_svm_terminate, which is an ultravisor call, without any check that the guest is a secure guest or even that the system has an ultravisor. On a system without an ultravisor, the ultracall will degenerate to a hypercall, but since we are not in KVM guest context, the hypercall will get treated as a system call, which could have random effects depending on what happens to be in r0, and could also corrupt the current task's kernel stack. Hence this adds a test for the guest being a secure guest before doing uv_svm_terminate(). Fixes: 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-12-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix kexec booting with certain EFI memory map layouts" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage
2019-12-17Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Add HPET quirks for the Intel 'Coffee Lake H' and 'Ice Lake' platforms" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel: Disable HPET on Intel Ice Lake platforms x86/intel: Disable HPET on Intel Coffee Lake H platforms
2019-12-17perf/x86/intel: Fix PT PMI handlingAlexander Shishkin1-2/+7
Commit: ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") skips the PT/LBR exclusivity check on CPUs where PT and LBRs coexist, but also inadvertently skips the active_events bump for PT in that case, which is a bug. If there aren't any hardware events at the same time as PT, the PMI handler will ignore PT PMIs, as active_events reads zero in that case, resulting in the "Uhhuh" spurious NMI warning and PT data loss. Fix this by always increasing active_events for PT events. Fixes: ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") Reported-by: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lkml.kernel.org/r/20191210105101.77210-1-alexander.shishkin@linux.intel.com
2019-12-17perf/x86/intel/bts: Fix the use of page_private()Alexander Shishkin1-5/+11
Commit 8062382c8dbe2 ("perf/x86/intel/bts: Add BTS PMU driver") brought in a warning with the BTS buffer initialization that is easily tripped with (assuming KPTI is disabled): instantly throwing: > ------------[ cut here ]------------ > WARNING: CPU: 2 PID: 326 at arch/x86/events/intel/bts.c:86 bts_buffer_setup_aux+0x117/0x3d0 > Modules linked in: > CPU: 2 PID: 326 Comm: perf Not tainted 5.4.0-rc8-00291-gceb9e77324fa #904 > RIP: 0010:bts_buffer_setup_aux+0x117/0x3d0 > Call Trace: > rb_alloc_aux+0x339/0x550 > perf_mmap+0x607/0xc70 > mmap_region+0x76b/0xbd0 ... It appears to assume (for lost raisins) that PagePrivate() is set, while later it actually tests for PagePrivate() before using page_private(). Make it consistent and always check PagePrivate() before using page_private(). Fixes: 8062382c8dbe2 ("perf/x86/intel/bts: Add BTS PMU driver") Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lkml.kernel.org/r/20191205142853.28894-2-alexander.shishkin@linux.intel.com
2019-12-17perf/x86: Fix potential out-of-bounds accessPeter Zijlstra1-2/+8
UBSAN reported out-of-bound accesses for x86_pmu.event_map(), it's arguments should be < x86_pmu.max_events. Make sure all users observe this constraint. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Meelis Roos <mroos@linux.ee>
2019-12-17x86/mce: Fix possibly incorrect severity calculation on AMDJan H. Schönherr1-1/+1
The function mce_severity_amd_smca() requires m->bank to be initialized for correct operation. Fix the one case, where mce_severity() is called without doing so. Fixes: 6bda529ec42e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems") Fixes: d28af26faa0b ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()") Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Link: https://lkml.kernel.org/r/20191210000733.17979-4-jschoenh@amazon.de
2019-12-17x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[]Yazen Ghannam1-1/+1
Each logical CPU in Scalable MCA systems controls a unique set of MCA banks in the system. These banks are not shared between CPUs. The bank types and ordering will be the same across CPUs on currently available systems. However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while other CPUs do not. In this case, the bank seen as Reserved on one CPU is assumed to be the same type as the bank seen as a known type on another CPU. In general, this occurs when the hardware represented by the MCA bank is disabled, e.g. disabled memory controllers on certain models, etc. The MCA bank is disabled in the hardware, so there is no possibility of getting an MCA/MCE from it even if it is assumed to have a known type. For example: Full system: Bank | Type seen on CPU0 | Type seen on CPU1 ------------------------------------------------ 0 | LS | LS 1 | UMC | UMC 2 | CS | CS System with hardware disabled: Bank | Type seen on CPU0 | Type seen on CPU1 ------------------------------------------------ 0 | LS | LS 1 | UMC | RAZ 2 | CS | CS For this reason, there is a single, global struct smca_banks[] that is initialized at boot time. This array is initialized on each CPU as it comes online. However, the array will not be updated if an entry already exists. This works as expected when the first CPU (usually CPU0) has all possible MCA banks enabled. But if the first CPU has a subset, then it will save a "Reserved" type in smca_banks[]. Successive CPUs will then not be able to update smca_banks[] even if they encounter a known bank type. This may result in unexpected behavior. Depending on the system configuration, a user may observe issues enumerating the MCA thresholding sysfs interface. The issues may be as trivial as sysfs entries not being available, or as severe as system hangs. For example: Bank | Type seen on CPU0 | Type seen on CPU1 ------------------------------------------------ 0 | LS | LS 1 | RAZ | UMC 2 | CS | CS Extend the smca_banks[] entry check to return if the entry is a non-reserved type. Otherwise, continue so that CPUs that encounter a known bank type can update smca_banks[]. Fixes: 68627a697c19 ("x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191121141508.141273-1-Yazen.Ghannam@amd.com
2019-12-17x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()Konstantin Khlebnikov1-1/+1
... because interrupts are disabled that early and sending IPIs can deadlock: BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 no locks held by swapper/1/0. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffff8106dda9>] copy_process+0x8b9/0x1ca0 softirqs last enabled at (0): [<ffffffff8106dda9>] copy_process+0x8b9/0x1ca0 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffffff8104703b>] start_secondary+0x3b/0x190 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.5.0-rc2+ #1 Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018 Call Trace: dump_stack ___might_sleep.cold.92 wait_for_completion ? generic_exec_single rdmsr_safe_on_cpu ? wrmsr_on_cpus mce_amd_feature_init mcheck_cpu_init identify_cpu identify_secondary_cpu smp_store_cpu_info start_secondary secondary_startup_64 The function smca_configure() is called only on the current CPU anyway, therefore replace rdmsr_safe_on_cpu() with atomic rdmsr_safe() and avoid the IPI. [ bp: Update commit message. ] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/157252708836.3876.4604398213417262402.stgit@buzz
2019-12-17KVM: PPC: Book3S HV: Fix regression on big endian hostsMarcus Comstedt1-2/+2
VCPU_CR is the offset of arch.regs.ccr in kvm_vcpu. arch/powerpc/include/asm/kvm_host.h defines arch.regs as a struct pt_regs, and arch/powerpc/include/asm/ptrace.h defines the ccr field of pt_regs as "unsigned long ccr". Since unsigned long is 64 bits, a 64-bit load needs to be used to load it, unless an endianness specific correction offset is added to access the desired subpart. In this case there is no reason to _not_ use a 64 bit load though. Fixes: 6c85b7bc637b ("powerpc/kvm: Use UV_RETURN ucall to return to ultravisor") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191215094900.46740-1-marcus@mc.pp.se
2019-12-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds18-29/+62
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I didn't get a batch in this weekend, so here's what we queued up last week and today. - A couple of defconfigs add back debugfs -- it used to be implicitly enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency") removed that. - The rest are mostly minor fixlets of the usual kind; some DT tweaks, a headerfile refactor that needs a build fix now, etc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: bcm: Add missing sentinel to bcm2711_compat[] ARM: shmobile: defconfig: Restore debugfs support bus: ti-sysc: Fix missing reset delay handling ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node ARM: mmp: include the correct cputype.h ARM: dts: am437x-gp/epos-evm: fix panel compatible arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: bcm283x: Fix critical trip point ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example ...
2019-12-16Merge tag 'arm-soc/for-5.5/soc-fixes' of ↵Olof Johansson1-0/+1
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine fixes for 5.5-rc1, please pull the following: - H. Nikolaus adds a missing sentinel entry to the BCM2711 machine descriptor compatible array which would make multiplatform kernels fail to boot * tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Add missing sentinel to bcm2711_compat[] Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'samsung-fixes-5.5' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.5 1. Restore debugfs support in exynos_defconfig (as now it is not selected as dependency of tracing). Debugfs is required by systemd and several tests. 2. Maintainers updates. * tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Restore debugfs support MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry MAINTAINERS: Update Lukasz Luba's email address Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'renesas-fixes-for-v5.5-tag1' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.5 - Restore debugfs support * tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16powerpc: Fix __clear_user() with KUAP enabledAndrew Donnellan3-7/+12
The KUAP implementation adds calls in clear_user() to enable and disable access to userspace memory. However, it doesn't add these to __clear_user(), which is used in the ptrace regset code. As there's only one direct user of __clear_user() (the regset code), and the time taken to set the AMR for KUAP purposes is going to dominate the cost of a quick access_ok(), there's not much point having a separate path. Rename __clear_user() to __arch_clear_user(), and make __clear_user() just call clear_user(). Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com Reported-by: Daniel Axtens <dja@axtens.net> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> [mpe: Use __arch_clear_user() for the asm version like arm64 & nds32] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com
2019-12-16powerpc/pseries/cmm: fix managed page counts when migrating pages between zonesDavid Hildenbrand1-0/+10
Commit 63341ab03706 (virtio-balloon: fix managed page counts when migrating pages between zones) fixed a long existing BUG in the virtio-balloon driver when pages would get migrated between zones. I did not try to reproduce on powerpc, but looking at the code, the same should apply to powerpc/cmm ever since it started using the balloon compaction infrastructure (luckily just recently). In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. Fix it by properly adjusting the managed page count when migrating if the zone changed. We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216103058.4958-1-david@redhat.com
2019-12-16powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk()Christophe Leroy1-1/+1
Remove __init qualifier for mmu_mapin_ram_chunk() as it is called by mmu_mark_initmem_nx() and mmu_mark_rodata_ro() which are not __init functions. At the same time, mark it static as it is only used in this file. Reported-by: kbuild test robot <lkp@intel.com> Fixes: a2227a277743 ("powerpc/32: Don't populate page tables for block mapped pages except on the 8xx") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/56648921986a6b3e7315b1fbbf4684f21bd2dea8.1576310997.git.christophe.leroy@c-s.fr
2019-12-15ARM: bcm: Add missing sentinel to bcm2711_compat[]H. Nikolaus Schaller1-0/+1
commit 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") breaks boot of many other platforms (e.g. OMAP or i.MX6) if CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform config (e.g. omap2plus_defconfig). The symptom is that the OMAP based board does not show any activity beyond "Starting Kernel ..." even with earlycon. Reverting the mentioned commit makes it work again. The real fix is to add the missing NULL sentinel to the bcm2711_compat[] variable-length array. Fixes: 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-15Merge tag 'riscv/for-v5.5-rc2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Two minor build fixes: - Fix builds of the ELF loader when built with 'make -j1' (nommu only) - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found during randconfig testing)" * tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: only select serial sifive if TTY is enabled riscv: Fix build dependency for loader
2019-12-15parisc: add missing __init annotationSven Schnelle1-1/+1
compilation failed with: MODPOST vmlinux.o WARNING: vmlinux.o(.text.unlikely+0xa0c): Section mismatch in reference from the function walk_lower_bus() to the function .init.text:walk_native_bus() The function walk_lower_bus() references the function __init walk_native_bus(). This is often because walk_lower_bus lacks a __init annotation or the annotation of walk_native_bus is wrong. FATAL: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[2]: *** [/home/svens/linux/parisc-linux/src/scripts/Makefile.modpost:64: __modpost] Error 1 make[1]: *** [/home/svens/linux/parisc-linux/src/Makefile:1077: vmlinux] Error 2 make[1]: Leaving directory '/home/svens/linux/parisc-linux/build' make: *** [Makefile:179: sub-make] Error 2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-12-15parisc: fix compilation when KEXEC=n and KEXEC_FILE=ySven Schnelle2-5/+1
Fix compilation when the CONFIG_KEXEC_FILE=y and CONFIG_KEXEC=n. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>