summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-04-07ARM: 8014/1: mm: fix reporting of read-only PMD bitsKees Cook1-15/+32
On non-LPAE ARMv6+, read-only PMD bits are defined with the combination "PMD_SECT_APX | PMD_SECT_AP_WRITE". Adjusted the bit masks to correctly report this. Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-07ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddrLiu Hua1-1/+1
When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will overflow if pfn >= 0x100000 in copy_oldmem_page. So use __pfn_to_phys for converting. Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-07ARM: 8010/1: avoid tracers in soft_restartSebastian Capella1-1/+1
Use of tracers in local_irq_disable is causes abort loops when called with irqs disabled using a temporary stack. Replace local_irq_disable with raw_local_irq_disable instead to avoid tracers. Signed-off-by: Sebastian Capella <sebastian.capella@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-19ARM: 8007/1: Remove extraneous kcmp syscall ignoreChristopher Covington1-1/+0
The kcmp system call was ported to ARM in commit 3f7d1fe108dbaefd0c57a41753fc2c90b395f458 "ARM: 7665/1: Wire up kcmp syscall". Fixes: 3f7d1fe108db ("ARM: 7665/1: Wire up kcmp syscall") Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-07ARM: 7992/1: boot: compressed: ignore bswapsdi2.SMark Rutland1-0/+1
Commit 017f161a55b4 (ARM: 7877/1: use built-in byte swap function) added bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update the .gitignore. Thus after a a build git status shows bswapsdi2.S as a new file, which is a little annoying. This patch updates arch/arm/boot/compressed/.gitignore to ignore bswapsdi2.S, as we already do for ashldi3.S and others. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-07ARM: 7991/1: sa1100: fix compile problem on CollieLinus Walleij1-0/+2
Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: stable@vger.kernel.org Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-07ARM: fix noMMU kallsyms symbol filteringRussell King2-6/+5
With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This commit makes that explicit. Since we do this, we don't need to mess around in asm/memory.h with ifdefs to sort this out, so let's get rid of that, and there's no point offering the "Memory split" option for noMMU as that's meaningless there. Fixes: b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-21ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPUThomas Petazzoni2-1/+13
Currently, when the kernel is configured with LPAE support, but the CPU doesn't support it, the error message is fairly cryptic: Error: unrecognized/unsupported processor variant (0x561f5811). This messages is normally shown when there is an issue when comparing the processor ID (CP15 0, c0, c0) with the values/masks described in proc-v7.S. However, the same message is displayed when LPAE support is enabled in the kernel configuration, but not available in the CPU, after looking at ID_MMFR0 (CP15 0, c0, c1, 4). Having the same error message is highly misleading. This commit improves this by showing a different error message when this situation occurs: Error: Kernel with LPAE support, but CPU does not support LPAE. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18ARM: 7963/1: mm: report both sections from PMDKees Cook1-0/+3
On 2-level page table systems, the PMD has 2 section entries. Report these, otherwise ARM_PTDUMP will miss reporting permission changes on odd section boundaries. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-17ARM: 7957/1: add DSB after icache flush in __flush_icache_all()Vinayak Kale1-0/+1
Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by: Vinayak Kale <vkale@apm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7955/1: spinlock: ensure we have a compiler barrier before sevWill Deacon1-12/+3
When unlocking a spinlock, we require the following, strictly ordered sequence of events: <barrier> /* dmb */ <unlock> <barrier> /* dsb */ <sev> Whilst the code does indeed reflect this in terms of the architecture, the final <barrier> + <sev> have been contracted into a single inline asm without a "memory" clobber, therefore the compiler is at liberty to reorder the unlock to the end of the above sequence. In such a case, a waiting CPU may be woken up before the lock has been unlocked, leading to extremely poor performance. This patch reworks the dsb_sev() function to make use of the dsb() macro and ensure ordering against the unlock. Cc: <stable@vger.kernel.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMUWill Deacon2-2/+3
During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Cc: <stable@vger.kernel.org> Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7952/1: mm: Fix the memblock allocation for LPAE machinesSantosh Shilimkar1-1/+1
Commit ad6492b8 added much needed memblock_virt_alloc_low() and further commit 07bacb3 {memblock, bootmem: restore goal for alloc_low} fixed the issue with low memory limit thanks to Yinghai. But even after all these fixes, there is still one case where the limit check done with ARCH_LOW_ADDRESS_LIMIT for low memory fails. Russell pointed out the issue with 32 bit LPAE machines in below thread. https://lkml.org/lkml/2014/1/28/364 Since on some LPAE machines where memory start address is beyond 4GB, the low memory marker in memblock will be set to default ARCH_LOW_ADDRESS_LIMIT which is wrong. We can fix this by letting architectures set the ARCH_LOW_ADDRESS_LIMIT using another export similar to memblock_set_current_limit() but am not sure whether its worth the trouble. Tell me if you think otherwise. Rather am just trying to fix that one broken case using memblock_virt_alloc() in setup code since the memblock.current_limit is updated appropriately makes it work on all ARM 32 bit machines. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Strashko, Grygorii <grygorii.strashko@ti.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7950/1: mm: Fix stage-2 device memory attributesChristoffer Dall3-7/+16
The stage-2 memory attributes are distinct from the Hyp memory attributes and the Stage-1 memory attributes. We were using the stage-1 memory attributes for stage-2 mappings causing device mappings to be mapped as normal memory. Add the S2 equivalent defines for memory attributes and fix the comments explaining the defines while at it. Add a prot_pte_s2 field to the mem_type struct and fill out the field for device mappings accordingly. Cc: <stable@vger.kernel.org> [3.9+] Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-08ARM: dts: fix spdif pinmux configurationRussell King2-14/+6
The spdif pinmux configuration must be connected to the spdif device to take effect, not the spdif-transmitter. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-02parisc: add flexible mmap memory layout supportHelge Deller6-43/+233
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: Make EWOULDBLOCK be equal to EAGAIN on pariscGuy Martin1-1/+1
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: convert uapi/asm/stat.h to use native types onlyHelge Deller1-21/+19
The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: wire up sched_setattr and sched_getattrHelge Deller2-1/+5
Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: fix cache-flushingHelge Deller3-3/+16
This commit: f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds27-43/+381
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
2014-02-01tile: remove compat_sys_lookup_dcookie declaration to fix compile errorHeiko Carstens1-1/+0
With commit d8d14bd09cdd ("fs/compat: fix lookup_dcookie() parameter handling") I changed the type of the len parameter of the lookup_dcookie() syscall. However I missed that there was still a stale declaration in arch/tile/.. which now causes a compile error on tile: In file included from fs/dcookies.c:28:0: include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie' fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie' Simply remove the declaration in the tile architecture, which is only a leftover from before the different compat lookup_dcookie() versions have been merged. The correct declaration is now in include/linux/compat.h The build error was reported by Fenguang's build bot. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-31ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMAOlof Johansson1-10/+2
TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: multi_v7_defconfig: add mvebu driversOlof Johansson1-0/+10
Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: bcm28155-ap: Fix Card Detection GPIOTim Kryger1-1/+3
The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'renesas-dt-fixes2-for-v3.14' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC DT Fixes for v3.14 Correct i2c clock references for r8a7790 (R-Car H2) SoC The error was introduced in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is queued up for v3.14. * tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHYFabio Estevam1-0/+1
Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not setGrygorii Strashko2-1/+1
Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson3-3/+50
mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: zynq: Add SDHCI nodesSoren Brinkmann4-0/+32
Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: hisi: don't select SMPRob Herring1-1/+0
SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: tegra: rebuild tegra_defconfig to add DEBUG_FSStephen Warren1-8/+3
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-31ARM: multi_v7: copy most options from tegra_defconfigStephen Warren1-11/+142
multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: iop32x: fix power off handling for the EM7210 boardLinus Walleij1-5/+27
This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: integrator: restore static map on the CPLinus Walleij1-0/+6
Commit 78d1632183454dba46ca8295484a5e7603acdc18 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: msm_defconfig: Enable MSM clock driversStephen Boyd1-0/+4
This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: msm: Add clock controller nodes and hook into uartStephen Boyd3-0/+53
Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: OMAP4+: move errata initialization to omap4_pm_init_earlyNishanth Menon4-5/+23
Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidleStrashko, Grygorii4-5/+31
The same workaround as ff999b8a0983ee15668394ed49e38d3568fc6859 "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'arm64-upstream' of ↵Linus Torvalds8-43/+74
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pyll ARM64 patches from Catalin Marinas: - Build fix with DMA_CMA enabled - Introduction of PTE_WRITE to distinguish between writable but clean and truly read-only pages - FIQs enabling/disabling clean-up (they aren't used on arm64) - CPU resume fix for the per-cpu offset restoring - Code comment typos * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Introduce PTE_WRITE arm64: mm: Remove PTE_BIT_FUNC macro arm64: FIQs are unused arm64: mm: fix the function name in comment of cpu_do_switch_mm arm64: fix build error if DMA_CMA is enabled arm64: kernel: fix per-cpu offset restore on resume arm64: mm: fix the function name in comment of __flush_dcache_area arm64: mm: use ubfm for dcache_line_size
2014-01-31Merge branch 'for-linus' of ↵Linus Torvalds8-3/+87
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha updates from Matt Turner: "A pair of changes for alpha. One fixes a networking regression, and the second adds audit syscall support which will help in supporting systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: fix broken network checksum alpha: Enable system-call auditing support.
2014-01-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds3-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
2014-01-31alpha: fix broken network checksumMikulas Patocka1-2/+7
The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 breaks networking on alpha (there is a follow-up fix 5cfe8f1ba5eebe6f4b6e5858cdb1a5be4f3272a6, but networking is still broken even with the second patch). The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 makes csum_partial_copy_from_user check the pointer with access_ok. However, csum_partial_copy_from_user is called also from csum_partial_copy_nocheck and csum_partial_copy_nocheck is called on kernel pointers and it is supposed not to check pointer validity. This bug results in ssh session hangs if the system is loaded and bulk data are printed to ssh terminal. This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so that access_ok in csum_partial_copy_from_user accepts kernel-space addresses. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
2014-01-31alpha: Enable system-call auditing support.蔡正龙7-1/+80
Signed-off-by: Zhenglong.cai <zhenglong.cai@cs2c.com.cn> Signed-off-by: Matt Turner <mattst88@gmail.com>
2014-01-31Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds3-22/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core debug changes from Ingo Molnar: "This contains mostly kernel debugging related updates: - make hung_task detection more configurable to distros - add final bits for x86 UV NMI debugging, with related KGDB changes - update the mailing-list of MAINTAINERS entries I'm involved with" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hung_task: Display every hung task warning sysctl: Add neg_one as a standard constraint x86/uv/nmi, kgdb/kdb: Fix UV NMI handler when KDB not configured x86/uv/nmi: Fix Sparse warnings kgdb/kdb: Fix no KDB config problem MAINTAINERS: Restore "L: linux-kernel@vger.kernel.org" entries
2014-01-31Merge tag 'stable/for-linus-3.14-rc0-late-tag' of ↵Linus Torvalds5-48/+55
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "Bug-fixes for the new features that were added during this cycle. There are also two fixes for long-standing issues for which we have a solution: grant-table operations extra work that was not needed causing performance issues and the self balloon code was too aggressive causing OOMs. Details: - Xen ARM couldn't use the new FIFO events - Xen ARM couldn't use the SWIOTLB if compiled as 32-bit with 64-bit PCIe devices. - Grant table were doing needless M2P operations. - Ratchet down the self-balloon code so it won't OOM. - Fix misplaced kfree in Xen PVH error code paths" * tag 'stable/for-linus-3.14-rc0-late-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pages drivers: xen: deaggressive selfballoon driver xen/grant-table: Avoid m2p_override during mapping xen/gnttab: Use phys_addr_t to describe the grant frame base address xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t) arm/xen: Initialize event channels earlier
2014-01-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds51-1109/+1694
Pull more KVM updates from Paolo Bonzini: "Second batch of KVM updates. Some minor x86 fixes, two s390 guest features that need some handling in the host, and all the PPC changes. The PPC changes include support for little-endian guests and enablement for new POWER8 features" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits) x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101 x86, kvm: cache the base of the KVM cpuid leaves kvm: x86: move KVM_CAP_HYPERV_TIME outside #ifdef KVM: PPC: Book3S PR: Cope with doorbell interrupts KVM: PPC: Book3S HV: Add software abort codes for transactional memory KVM: PPC: Book3S HV: Add new state for transactional memory powerpc/Kconfig: Make TM select VSX and VMX KVM: PPC: Book3S HV: Basic little-endian guest support KVM: PPC: Book3S HV: Add support for DABRX register on POWER7 KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8 KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8 KVM: PPC: Book3S HV: Add handler for HV facility unavailable KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8 KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbers KVM: PPC: Book3S HV: Don't set DABR on POWER8 kvm/ppc: IRQ disabling cleanup ...
2014-01-31xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pagesDave Jones1-1/+2
Passing a freed 'pages' to free_xenballooned_pages will end badly on kernels with slub debug enabled. This looks out of place between the rc assign and the check, but we do want to kfree pages regardless of which path we take. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31xen/grant-table: Avoid m2p_override during mappingZoltan Kiss2-17/+5
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the original functions were renamed to __gnttab_[un]map_refs, with a new parameter m2p_override - based on m2p_override either they follow the original behaviour, or just set the private flag and call set_phys_to_machine - gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with m2p_override false - a new function gnttab_[un]map_refs_userspace provides the old behaviour It also removes a stray space from page.h and change ret to 0 if XENFEAT_auto_translated_physmap, as that is the only possible return value there. v2: - move the storing of the old mfn in page->index to gnttab_map_refs - move the function header update to a separate patch v3: - a new approach to retain old behaviour where it needed - squash the patches into one v4: - move out the common bits from m2p* functions, and pass pfn/mfn as parameter - clear page->private before doing anything with the page, so m2p_find_override won't race with this v5: - change return value handling in __gnttab_[un]map_refs - remove a stray space in page.h - add detail why ret = 0 now at some places v6: - don't pass pfn to m2p* functions, just get it locally Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: David Vrabel <david.vrabel@citrix.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31arm64: mm: Introduce PTE_WRITESteve Capper1-23/+25
We have the following means for encoding writable or dirty ptes: PTE_DIRTY PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writable but not dirty. This patch introduces a new software bit PTE_WRITE which allows us to correctly identify writable ptes. PTE_RDONLY is now only clear for valid ptes where a page is both writable and dirty. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-16 12:05:47 +0000