summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2006-02-17[PATCH] Remove KERN_INFO from middle of printk lineTim Hockin1-2/+2
Don't print KERN_INFO in the middle of a printk line. printk(KERN_INFO "OEM ID: %s ",str); is just above this. This is already fixed up in i386 copy. Signed-off-by: Martin J. Bligh <mbligh@google.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: sys32_fstatat -> sys32_fstatat64Heiko Carstens3-6/+6
Just rename the compat system call to keep the name consistent with all the other *64 compat system calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: smp initialization speedHeiko Carstens1-5/+10
The last changes that introduced the additional_cpus command line parameter also introduced a regression regarding smp initialization speed. In smp_setup_cpu_possible_map() cpu_present_map is set to the same value as cpu_possible_map. Especially that means that bits in the present map will be set for cpus that are not present. This will cause a slow down in the initial cpu_up() loop in smp_init() since trying to take cpus online that aren't present takes a while. Fix this by setting only bits for present cpus in cpu_present_map and set cpu_present_map to cpu_possible_map in smp_cpus_done(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: possible_cpus parameterHeiko Carstens1-3/+11
Introduce possible_cpus command line option. Hard sets the number of bits set in cpu_possible_map. Unlike the additional_cpus parameter this one guarantees that num_possible_cpus() will stay constant even if the system gets rebooted and a different number of cpus are present at startup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: additional_cpus parameterHeiko Carstens2-18/+42
Introduce additional_cpus command line option. By default no additional cpu can be attached to the system anymore. Only the cpus present at IPL time can be switched on/off. If it is desired that additional cpus can be attached to the system the maximum number of additional cpus needs to be specified with this option. This change is necessary in order to limit the waste of per_cpu data structures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: fix preempt_count of idle thread with cpu hotplugHeiko Carstens1-1/+3
Set preempt_count of idle_thread to zero before switching off cpu. Otherwise the preempt_count will be wrong if the cpu is switched on again since the thread will be reused. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] Introduce CONFIG_DEFAULT_MIGRATION_COSTIngo Molnar1-0/+4
Heiko Carstens <heiko.carstens@de.ibm.com> wrote: The boot sequence on s390 sometimes takes ages and we spend a very long time (up to one or two minutes) in calibrate_migration_costs. The time spent there differs from boot to boot. Also the calculated costs differ a lot. I've seen differences by up to a factor of 15 (yes, factor not percent). Also I doubt that making these measurements make much sense on a completely virtualized architecture where you cannot tell how much cpu time you will get anyway. So introduce the CONFIG_DEFAULT_MIGRATION_COST method for an architecture to set the scheduler migration costs. This turns off automatic detection of migration costs. Makes sense on virtual platforms, where migration costs are hard to measure accurately. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] arch/sh/Kconfig: fix the ISA_DMA_API dependenciesAdrian Bunk1-1/+1
Jean-Luc Leger <reiga@dspnet.fr.eu.org> found this obvious typo. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17Merge branch 'release' of ↵Linus Torvalds21-202/+235
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2006-02-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds10-19/+70
2006-02-17[PATCH] x86_64: Always pass full number of nodes to NUMA hash computationAndi Kleen2-2/+2
Previously the numa hash code would be confused by holes in the node space and stop early. This is the first part of the fix for the non boot issue with empty nodes on Opterons. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Relax SRAT covers all memory check a bitAndi Kleen1-1/+2
Code was refusing good SRATs because about 12K got lost somewhere. Allow less than 1MB of difference before rejecting it. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Resolve the RIP of an early exception using kallsymsAndi Kleen1-0/+7
But do it after everything else to risk less from recursive crashes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Disable tsc when apicpmtimer is activeAndi Kleen2-2/+2
Otherwise it has no effect anyways. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Don't enable ATI apicmaintimer workaround when the machine ↵Andi Kleen1-0/+16
has C2 or C3 Many laptops have problems with ticking the local APIC timer in C2/C3. The code added earlier to use it by default on ATI didn't really work for them. Don't enable it when the system supports C2/C3. This doesn't fix the problem fully, but at least it's not worse than before. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Don't call do_exit with interrupts disabled after IRET exceptionAndi Kleen1-0/+1
This caused a sigreturn with bad argument on a preemptible kernel to complain with Debug: sleeping function called from invalid context at /home/lsrc/quilt/linux/include/linux/rwsem.h:43 in_atomic():0, irqs_disabled():1 Call Trace: {__might_sleep+190} {profile_task_exit+21} {__do_exit+34} {do_wait+0} Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Add boot option to disable randomized mappings and cleanupAndi Kleen1-0/+1
AMD SimNow!'s JIT doesn't like them at all in the guest. For distribution installation it's easiest if it's a boot time option. Also I moved the variable to a more appropiate place and make it independent from sysctl And marked __read_mostly which it is. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: make touch_nmi_watchdog() not touch impossible cpus' private ↵Jan Beulich1-8/+11
data Along with that, also suppress the memory touching altogether when the watchdog is not running, to eliminate needless crosstalk. Plus ad a call to it to make things consistent (one could also consider removing the call in enable_timer_nmi_watchdog()). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Update defconfigAndi Kleen1-9/+33
... and enable 1394 by default. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-16[ARM] 3338/1: old ABI compat: sys_socketcallNicolas Pitre2-1/+31
Patch from Nicolas Pitre Commit 99595d0237926b5aba1fe4c844a011a1ba1ee1f8 forgot to intercept sys_socketcall as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16[ARM] 3337/1: Fix NSLU2 flash support according to window size configuration ↵Martin Michlmayr1-2/+4
patch Patch from Martin Michlmayr ARM patch 3226/1 (IXP4xx runtime expansion bus window size configuration) forgot to update mach-ixp4xx/nslu2-setup.c which leads to the following compilation error. Update NSLU2 flash support following patch 3226/1. CC arch/arm/mach-ixp4xx/nslu2-setup.o arch/arm/mach-ixp4xx/nslu2-setup.c:30: error: ‘NSLU2_FLASH_BASE’ undeclared here (not in a function) arch/arm/mach-ixp4xx/nslu2-setup.c:31: error: ‘NSLU2_FLASH_SIZE’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-ixp4xx/nslu2-setup.o] Error 1 make: *** [arch/arm/mach-ixp4xx] Error 2 Signed-off-by: Martin Michlmayr <tbm@cyrius.com> --- nslu2-setup.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16[IA64] Count disabled cpus as potential hot-pluggable CPUsAshok Raj1-11/+8
Minor updates to earlier patch. - Added to documentation to add ia64 as well. - Minor clarification on how to use disabled cpus - used plain max instead of max_t per Andew Morton. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-16[IA64] Missing check for TIF_WORK if trace/audit enabledJack Steiner1-1/+3
It appears that if auditing is enabled, the kernel fails to check for pending signals before returning to user mode. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-16[ARM] Fix SMP initialisation oopsRussell King4-13/+35
A change to the SMP initialisation caused the following oops: CPU1: Booted secondary processor CPU1: D VIPT write-back cache CPU1: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU1: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets <7>Calibrating delay loop... 83.14 BogoMIPS (lpj=415744) <1>Unable to handle kernel NULL pointer dereference at virtual address 0000001c ... PC is at enqueue_task+0x1c/0x64 LR is at activate_task+0xcc/0xe4 SMP initialisation now requires cpu_possible_map to be initialised in setup_arch(). Move this from smp_prepare_cpus() to smp_init_cpus() and call it from our setup_arch() if CONFIG_SMP is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-15[PATCH] x86_64: early initialization of cpu_to_nodeDaniel Yeisley1-1/+1
The early initialization of cpu_to_node code as it is now only updates the cpu_to_node array, and does not update cpu_pda()->nodemember. This will cause numa_node_id() to return 0 on systems where CPU 0 is not on Node 0. This leads to a kernel panic in slab.c. I've tested the patch below on a 16 processor x86_64 ES7000-600 server, and no longer see the panic I saw with the original 2.6.16-rc3. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15Pull fix-cpu-possible-map into release branchTony Luck3-4/+61
2006-02-15[IA64] support panic_on_oops sysctlHorms1-0/+8
Trivial port of this feature from i386 As it stands, panic_on_oops but does nothing on ia64 Signed-Off-By: Horms <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64] ia64: simplify and fix udelay()hawkes@sgi.com2-22/+36
The original ia64 udelay() was simple, but flawed for platforms without synchronized ITCs: a preemption and migration to another CPU during the while-loop likely resulted in too-early termination or very, very lengthy looping. The first fix (now in 2.6.15) broke the delay loop into smaller, non-preemptible chunks, reenabling preemption between the chunks. This fix is flawed in that the total udelay is computed to be the sum of just the non-premptible while-loop pieces, i.e., not counting the time spent in the interim preemptible periods. If an interrupt or a migration occurs during one of these interim periods, then that time is invisible and only serves to lengthen the effective udelay(). This new fix backs out the current flawed fix and returns to a simple udelay(), fully preemptible and interruptible. It implements two simple alternative udelay() routines: one a default generic version that uses ia64_get_itc(), and the other an sn-specific version that uses that platform's RTC. Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64-SGI] enforce proper ordering of callouts by XPCDean Nelson2-10/+18
Fix XPC so that it does not deliver any messages until the connected callout has returned, as well as, prevent the disconnected callout to occur before the disconnecting callout has returned. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64-SGI] fix the size of __sn_cnodeid_to_nasidDean Roe1-1/+1
The __sn_cnodeid_to_nasid array was incorrectly sized at MAX_NUMNODES. On a large system, this array could overflow. The following patch corrects this by defining it to MAX_COMPACT_NODES. Signed-off-by: Dean Roe <roe@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64-SGI] export sn_pcidev_info_getMark Maule1-0/+1
Export sn_pcidev_info_get. Signed-off-by Mark Maule <maule@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64-SGI] remove compile time warningJes Sorensen1-0/+2
This one falls into the "present for Andrew Morton" category to address his wishlist for a compiler warning free build ;-) Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64] remove obsolete corporate addressJes Sorensen1-6/+1
Remove obsolete SGI address Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64-SGI] sn2 minor fixes and cleanupsJes Sorensen9-143/+107
General SN2 code cleanup: - Do not initialize global variables to zero - Use kzalloc instead of kmalloc+memset - Check kmalloc return values - Do not obfuscate spin lock calls - Remove some unused code - Various formatting cleanups Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[IA64] Remove duplicate EXPORT_SYMBOLsAndreas Schwab1-15/+0
Remove symbol exports from ia64_ksyms.c that are already exported in lib/string.c. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-15[ARM] remove duplicate #includesHerbert Poetzl3-3/+0
Signed-off-by: Herbert P?tzl <herbert@13thfloor.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-14[PATCH] x86: gitignore some autogenerated files for i386Thomas Meyer3-0/+5
Add some more gitignore files for i386 architecture. This files are created during the build process of a i386 kernel. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] x86: document sysenter pathAlbert D. Cahalan1-0/+15
This path isn't obvious. It looks as if the kernel will be taking three args from the user stack, but it only takes one from there. Signed-off-by: Albert Cahalan <acahalan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] FRV: Use virtual interrupt disablementDavid Howells6-55/+172
Make the FRV arch use virtual interrupt disablement because accesses to the processor status register (PSR) are relatively slow and because we will soon have the need to deal with multiple interrupt controls at the same time (separate h/w and inter-core interrupts). The way this is done is to dedicate one of the four integer condition code registers (ICC2) to maintaining a virtual interrupt disablement state whilst inside the kernel. This uses the ICC2.Z flag (Zero) to indicate whether the interrupts are virtually disabled and the ICC2.C flag (Carry) to indicate whether the interrupts are physically disabled. ICC2.Z is set to indicate interrupts are virtually disabled. ICC2.C is set to indicate interrupts are physically enabled. Under normal running conditions Z==0 and C==1. Disabling interrupts with local_irq_disable() doesn't then actually physically disable interrupts - it merely sets ICC2.Z to 1. Should an interrupt then happen, the exception prologue will note ICC2.Z is set and branch out of line using one instruction (an unlikely BEQ). Here it will physically disable interrupts and clear ICC2.C. When it comes time to enable interrupts (local_irq_enable()), this simply clears the ICC2.Z flag and invokes a trap #2 if both Z and C flags are clear (the HI integer condition). This can be done with the TIHI conditional trap instruction. The trap then physically reenables interrupts and sets ICC2.C again. Upon returning the interrupt will be taken as interrupts will then be enabled. Note that whilst processing the trap, the whole exceptions system is disabled, and so an interrupt can't happen till it returns. If no pending interrupt had happened, ICC2.C would still be set, the HI condition would not be fulfilled, and no trap will happen. Saving interrupts (local_irq_save) is simply a matter of pulling the ICC2.Z flag out of the CCR register, shifting it down and masking it off. This gives a result of 0 if interrupts were enabled and 1 if they weren't. Restoring interrupts (local_irq_restore) is then a matter of taking the saved value mentioned previously and XOR'ing it against 1. If it was one, the result will be zero, and if it was zero the result will be non-zero. This result is then used to affect the ICC2.Z flag directly (it is a condition code flag after all). An XOR instruction does not affect the Carry flag, and so that bit of state is unchanged. The two flags can then be sampled to see if they're both zero using the trap (TIHI) as for the unconditional reenablement (local_irq_enable). This patch also: (1) Modifies the debugging stub (break.S) to handle single-stepping crossing into the trap #2 handler and into virtually disabled interrupts. (2) Removes superseded fixup pointers from the second instructions in the trap tables (there's no a separate fixup table for this). (3) Declares the trap #3 vector for use in .org directives in the trap table. (4) Moves irq_enter() and irq_exit() in do_IRQ() to avoid problems with virtual interrupt handling, and removes the duplicate code that has now been folded into irq_exit() (softirq and preemption handling). (5) Tells the compiler in the arch Makefile that ICC2 is now reserved. (6) Documents the in-kernel ABI, including the virtual interrupts. (7) Renames the old irq management functions to different names. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] FRV: Miscellaneous fixesDavid Howells2-14/+21
Make various alterations and fixes to the FRV arch: (1) Resyncs the FRV system call collection with the i386 arch. (2) Discards __iounmap() as it's not used. (3) Fixes the use of the SWAP/SWAPI instruction to get the arguments the right way around in atomic.h, and also to get the asm constraints correct. (4) Moves copy_to/from_user_page() to asm/cacheflush.h to be consistent with other archs. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] hrtimer: round up relative start time on low-res archesIngo Molnar6-0/+25
CONFIG_TIME_LOW_RES is a temporary way for architectures to signal that they simply return xtime in do_gettimeoffset(). In this corner-case we want to round up by resolution when starting a relative timer, to avoid short timeouts. This will go away with the GTOD framework. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] s390: fix __delay implementationHeiko Carstens1-1/+1
Fix __delay implementation. Called with an argument "1" or "0" it would loop nearly forever (since (1/2)-1 = 0xffffffff). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] fix a typo in the CPU_H8300H dependenciesAdrian Bunk1-1/+1
Jean-Luc Leger <reiga@dspnet.fr.eu.org> found this obvious typo. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[IA64] Count disabled cpus as potential hot-pluggable CPUsAshok Raj2-0/+60
Have a facility to account for potentially hot-pluggable CPUs. ACPI doesnt give a determinstic method to find hot-pluggable CPUs. Hence we use 2 methods to assist. - BIOS can mark potentially hot-pluggable CPUs as disabled in the MADT tables. - User can specify the number of hot-pluggable CPUs via parameter additional_cpus=X The option is enabled only if ACPI_CONFIG_HOTPLUG_CPU=y which enables the physical hotplug option. Without which user can still use logical onlining and offlining of CPUs by enabling CONFIG_HOTPLUG_CPU=y Adds more bits to cpu_possible_map for potentially hot-pluggable cpus. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-14[IA64] Dont set NR_CPUS for cpu_possible_map when CPU hotplug is enabled.Ashok Raj1-4/+1
Do not set cpu_possible_map for NR_CPUS when ACPI_CONFIG_HOTPLUG_CPU is set. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-14[MIPS] Fix typo in _sys32_rt_sigreturn and _sysn32_rt_sigreturn.Atsushi Nemoto2-2/+2
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-14[MIPS] RM9000: Fix buggy I-cache workaround.Thomas Koeller1-1/+1
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-14[MIPS] MT: Propagate config7 into VPE.Ralf Baechle1-0/+3
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-14[MIPS] MT: Fix c0 back-to-back hazard.Ralf Baechle1-0/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-14[MIPS] Get rid of kludgery needed to keep stdargs of old compilers working.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 07:31:03 +0000