| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- HYP mode stub supports kexec/kdump on 32-bit
- improved PMU support
- virtual interrupt controller performance improvements
- support for userspace virtual interrupt controller (slower, but
necessary for KVM on the weird Broadcom SoCs used by the Raspberry
Pi 3)
MIPS:
- basic support for hardware virtualization (ImgTec P5600/P6600/I6400
and Cavium Octeon III)
PPC:
- in-kernel acceleration for VFIO
s390:
- support for guests without storage keys
- adapter interruption suppression
x86:
- usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits
- emulation of CPL3 CPUID faulting
generic:
- first part of VCPU thread request API
- kvm_stat improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
kvm: nVMX: Don't validate disabled secondary controls
KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick
Revert "KVM: Support vCPU-based gfn->hva cache"
tools/kvm: fix top level makefile
KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING
KVM: Documentation: remove VM mmap documentation
kvm: nVMX: Remove superfluous VMX instruction fault checks
KVM: x86: fix emulation of RSM and IRET instructions
KVM: mark requests that need synchronization
KVM: return if kvm_vcpu_wake_up() did wake up the VCPU
KVM: add explicit barrier to kvm_vcpu_kick
KVM: perform a wake_up in kvm_make_all_cpus_request
KVM: mark requests that do not need a wakeup
KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up
KVM: x86: always use kvm_make_request instead of set_bit
KVM: add kvm_{test,clear}_request to replace {test,clear}_bit
s390: kvm: Cpu model support for msa6, msa7 and msa8
KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK
kvm: better MWAIT emulation for guests
KVM: x86: virtualize cpuid faulting
...
|
|
Pull ARM updates from Russell King:
"Lots of little things this time:
- allow modules to be autoloaded according to the HWCAP feature bits
(used primarily for crypto modules)
- split module core and init PLT sections, since the core code and
init code could be placed far apart, and the PLT sections need to
be local to the code block.
- three patches from Chris Brandt to allow Cortex-A9 L2 cache
optimisations to be disabled where a SoC didn't wire up the out of
band signals.
- NoMMU compliance fixes, avoiding corruption of vector table which
is not being used at this point, and avoiding possible register
state corruption when switching mode.
- fixmap memory attribute compliance update.
- remove unnecessary locking from update_sections_early()
- ftrace fix for DEBUG_RODATA with !FRAME_POINTER"
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8672/1: mm: remove tasklist locking from update_sections_early()
ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode
ARM: 8670/1: V7M: Do not corrupt vector table around v7m_invalidate_l1 call
ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER
ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap
ARM: 8663/1: wire up HWCAP/HWCAP2 feature bits to the CPU modalias
ARM: 8666/1: mm: dump: Add domain to output
ARM: 8662/1: module: split core and init PLT sections
ARM: 8661/1: dts: r7s72100: add l2 cache
ARM: 8660/1: shmobile: r7s72100: Enable L2 cache
ARM: 8659/1: l2c: allow CA9 optimizations to be disabled
|
|
Pull Xtensa updates from Max Filippov:
- clearly mark references to spilled register locations with SPILL_SLOT
macros
- clean up xtensa ptrace: use generic tracehooks, move internal kernel
definitions from uapi/asm to asm, make locally-used functions static,
fix code style and alignment
- use command line parameters passed to ISS as kernel command line.
* tag 'xtensa-20170507' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: clean up access to spilled registers locations
xtensa: use generic tracehooks
xtensa: move internal ptrace definitions from uapi/asm to asm
xtensa: clean up xtensa/kernel/ptrace.c
xtensa: drop unused fast_io_protect function
xtensa: use ITLB_HIT_BIT instead of hardcoded number
xtensa: ISS: update kernel command line in platform_setup
xtensa: ISS: add argc/argv simcall definitions
xtensa: ISS: cleanup setup.c
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- fix sparse warnings in drivers/of/
- add more overlay unittests
- update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
files such as unit-address formatting and stricter character sets for
node and property names
- add a common DT modalias function
- move trivial-devices.txt up and out of i2c dir
- ARM NVIC interrupt controller binding
- vendor prefixes for Sensirion, Dioo, Nordic, ROHM
- correct some binding file locations
* tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (24 commits)
of: fix sparse warnings in fdt, irq, reserved mem, and resolver code
of: fix sparse warning in of_pci_range_parser_one
of: fix sparse warnings in of_find_next_cache_node
of/unittest: Missing unlocks on error
of: fix uninitialized variable warning for overlay test
of: fix unittest build without CONFIG_OF_OVERLAY
of: Add unit tests for applying overlays
of: per-file dtc compiler flags
fpga: region: add missing DT documentation for config complete timeout
of: Add vendor prefix for ROHM Semiconductor
of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()
of: Add vendor prefix for Nordic Semiconductor
dt-bindings: arm,nvic: Binding for ARM NVIC interrupt controller on Cortex-M
dtc: update warning settings for new bus and node/property name checks
scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6
scripts/dtc: automate getting dtc version and log in update script
of: Add function for generating a DT modalias with a newline
of: fix of_device_get_modalias returned length when truncating buffers
Documentation: devicetree: move trivial-devices out of I2C realm
dt-bindings: add vendor prefix for Dioo
..
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has been in multiple -next releases. There were a few
late breaking fixes and small features that got added in the last
couple days, but the whole set has received a build success
notification from the kbuild robot.
Change summary:
- Region media error reporting: A libnvdimm region device is the
parent to one or more namespaces. To date, media errors have been
reported via the "badblocks" attribute attached to pmem block
devices for namespaces in "raw" or "memory" mode. Given that
namespaces can be in "device-dax" or "btt-sector" mode this new
interface reports media errors generically, i.e. independent of
namespace modes or state.
This subsequently allows userspace tooling to craft "ACPI 6.1
Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
requests and submit them via the ioctl path for NVDIMM root bus
devices.
- Introduce 'struct dax_device' and 'struct dax_operations': Prompted
by a request from Linus and feedback from Christoph this allows for
dax capable drivers to publish their own custom dax operations.
This fixes the broken assumption that all dax operations are
related to a persistent memory device, and makes it easier for
other architectures and platforms to add customized persistent
memory support.
- 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger
memory controllers to drain write-pending buffers that would
otherwise be flushed automatically by the platform ADR
(asynchronous-DRAM-refresh) mechanism at a power loss event.
Support for "locked" DIMMs is included to prevent namespaces from
surfacing when the namespace label data area is locked. Finally,
fixes for various reported deadlocks and crashes, also tagged for
-stable.
- ACPI / nfit driver updates: General updates of the nfit driver to
add DSM command overrides, ACPI 6.1 health state flags support, DSM
payload debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
- commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock":
Tested-by: Yi Zhang <yizhan@redhat.com>
- commit 23f498448362 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
libnvdimm, pfn: fix 'npfns' vs section alignment
libnvdimm: handle locked label storage areas
libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
brd: fix uninitialized use of brd->dax_dev
block, dax: use correct format string in bdev_dax_supported
device-dax: fix sysfs attribute deadlock
libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
libnvdimm: rework region badblocks clearing
acpi, nfit: kill ACPI_NFIT_DEBUG
libnvdimm: fix clear length of nvdimm_forget_poison()
libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
libnvdimm, region: sysfs trigger for nvdimm_flush()
libnvdimm: fix phys_addr for nvdimm_clear_poison
x86, dax, pmem: remove indirection around memcpy_from_pmem()
block: remove block_device_operations ->direct_access()
block, dax: convert bdev_dax_supported() to dax_direct_access()
filesystem-dax: convert to dax_direct_access()
Revert "block: use DAX for partition table reads"
ext2, ext4, xfs: retrieve dax_device for iomap operations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging tree update for 4.12-rc1.
It's a big one, adding about 350k new lines of crap^Wcode, mostly all
in a big dump of media drivers from Intel. But there's other new
drivers in here as well, yet-another-wifi driver, new IIO drivers, and
a new crypto accelerator.
We also deleted a bunch of stuff, mostly in patch cleanups, but also
the Android ION code has shrunk a lot, and the Android low memory
killer driver was finally deleted, much to the celebration of the -mm
developers.
All of these have been in linux-next with a few build issues that will
show up when you merge to your tree"
Merge conflicts in the new rtl8723bs driver (due to the wifi changes
this merge window) handled as per linux-next, courtesy of Stephen
Rothwell.
* tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits)
staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd
staging: ks7010: remove line continuations in quoted strings
staging: vt6656: use tabs instead of spaces
staging: android: ion: Fix unnecessary initialization of static variable
staging: media: atomisp: fix range checking on clk_num
staging: media: atomisp: fix misspelled word in comment
staging: media: atomisp: kmap() can't fail
staging: atomisp: remove #ifdef for runtime PM functions
staging: atomisp: satm include directory is gone
atomisp: remove some more unused files
atomisp: remove hmm_load/store/clear indirections
atomisp: kill off mmgr_free
atomisp: clean up the hmm init/cleanup indirections
atomisp: handle allocation calls before init in the hmm layer
staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver
staging: fsl-dpaa2/eth: Add TODO file
staging: fsl-dpaa2/eth: Add trace points
staging: fsl-dpaa2/eth: Add driver specific stats
staging: fsl-dpaa2/eth: Add ethtool support
staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Media updates for v4.12-rc1:
- new driver to support mediatek jpeg in hardware codec
- rc-lirc, s5p-cec and st-cec staging drivers got promoted
- hardware histogram support for vsp1 driver
- added Virtual Media Controller driver, to make easier to test the
media controller
- added a new CEC driver (rainshadow-cec)
- removed two staging LIRC drivers for obscure hardware that are too
obsolete
- added support for Intel SR300 Depth camera
- some improvements at CEC and RC core
- lots of driver cleanups, improvements all over the tree
With this series, we're finally getting rid of the LIRC staging
driver. There's just one left (lirc_zilog), with require more care,
as part of its functionality (IR RX) is already provided by another
driver. Work in progress to convert it on the proper way"
* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
[media] ov2640: print error if devm_*_optional*() fails
[media] atmel-isc: Fix the static checker warning
[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
[media] ov2640: fix vflip control
[media] ov2640: fix duplicate width+height returning from ov2640_select_win()
[media] ov2640: add missing write to size change preamble
[media] ov2640: add information about DSP register 0xc7
[media] ov2640: improve banding filter register definitions/documentation
[media] ov2640: fix init sequence alignment
[media] ov2640: make GPIOLIB an optional dependency
[media] xc5000: fix spelling mistake: "calibration"
[media] vidioc-queryctrl.rst: fix menu/int menu references
[media] media-entity: only call dev_dbg_obj if mdev is not NULL
[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
[media] mtk-vcodec: avoid warnings because of empty macros
[media] coda: bump maximum number of internal framebuffers to 17
[media] media: mtk-vcodec: remove informative log
[media] subdev-formats.rst: remove spurious '-'
[media] dw2102: limit messages to buffer size
[media] ttusb2: limit messages to buffer size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- kdump support, including two necessary memblock additions:
memblock_clear_nomap() and memblock_cap_memory_range()
- ARMv8.3 HWCAP bits for JavaScript conversion instructions, complex
numbers and weaker release consistency
- arm64 ACPI platform MSI support
- arm perf updates: ACPI PMU support, L3 cache PMU in some Qualcomm
SoCs, Cortex-A53 L2 cache events and DTLB refills, MAINTAINERS update
for DT perf bindings
- architected timer errata framework (the arch/arm64 changes only)
- support for DMA_ATTR_FORCE_CONTIGUOUS in the arm64 iommu DMA API
- arm64 KVM refactoring to use common system register definitions
- remove support for ASID-tagged VIVT I-cache (no ARMv8 implementation
using it and deprecated in the architecture) together with some
I-cache handling clean-up
- PE/COFF EFI header clean-up/hardening
- define BUG() instruction without CONFIG_BUG
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
arm64: Fix the DMA mmap and get_sgtable API with DMA_ATTR_FORCE_CONTIGUOUS
arm64: Print DT machine model in setup_machine_fdt()
arm64: pmu: Wire-up Cortex A53 L2 cache events and DTLB refills
arm64: module: split core and init PLT sections
arm64: pmuv3: handle pmuv3+
arm64: Add CNTFRQ_EL0 trap handler
arm64: Silence spurious kbuild warning on menuconfig
arm64: pmuv3: use arm_pmu ACPI framework
arm64: pmuv3: handle !PMUv3 when probing
drivers/perf: arm_pmu: add ACPI framework
arm64: add function to get a cpu's MADT GICC table
drivers/perf: arm_pmu: split out platform device probe logic
drivers/perf: arm_pmu: move irq request/free into probe
drivers/perf: arm_pmu: split cpu-local irq request/free
drivers/perf: arm_pmu: rename irq request/free functions
drivers/perf: arm_pmu: handle no platform_device
drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs()
drivers/perf: arm_pmu: factor out pmu registration
drivers/perf: arm_pmu: fold init into alloc
drivers/perf: arm_pmu: define armpmu_init_fn
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Larger virtual address space on 64-bit server CPUs. By default we
use a 128TB virtual address space, but a process can request access
to the full 512TB by passing a hint to mmap().
- Support for the new Power9 "XIVE" interrupt controller.
- TLB flushing optimisations for the radix MMU on Power9.
- Support for CAPI cards on Power9, using the "Coherent Accelerator
Interface Architecture 2.0".
- The ability to configure the mmap randomisation limits at build and
runtime.
- Several small fixes and cleanups to the kprobes code, as well as
support for KPROBES_ON_FTRACE.
- Major improvements to handling of system reset interrupts,
correctly treating them as NMIs, giving them a dedicated stack and
using a new hypervisor call to trigger them, all of which should
aid debugging and robustness.
- Many fixes and other minor enhancements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
Yang Shi"
* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
powerpc/powernv: Fix TCE kill on NVLink2
powerpc/mm/radix: Drop support for CPUs without lockless tlbie
powerpc/book3s/mce: Move add_taint() later in virtual mode
powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
powerpc/smp: Document irq enable/disable after migrating IRQs
powerpc/mpc52xx: Don't select user-visible RTAS_PROC
powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
powerpc/eeh: Clean up and document event handling functions
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
cxl: Mask slice error interrupts after first occurrence
cxl: Route eeh events to all drivers in cxl_pci_error_detected()
cxl: Force context lock during EEH flow
powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
powerpc/xmon: Teach xmon oops about radix vectors
powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
powerpc/pseries: Enable VFIO
powerpc/powernv: Fix iommu table size calculation hook for small tables
powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
powerpc: Add arch/powerpc/tools directory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
"This is a set of small fixes that were mostly stumbled over during
more significant development. This proc fix and the fix to
posix-timers are the most significant of the lot.
There is a lot of good development going on but unfortunately it
didn't quite make the merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Fix unbalanced hard link numbers
signal: Make kill_proc_info static
rlimit: Properly call security_task_setrlimit
signal: Remove unused definition of sig_user_definied
ia64: Remove unused IA64_TASK_SIGHAND_OFFSET and IA64_SIGHAND_SIGLOCK_OFFSET
ipc: Remove unused declaration of recompute_msgmni
posix-timers: Correct sanity check in posix_cpu_nsleep
sysctl: Remove dead register_sysctl_root
|
|
While honouring the DMA_ATTR_FORCE_CONTIGUOUS on arm64 (commit
44176bb38fa4: "arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to
IOMMU"), the existing uses of dma_mmap_attrs() and dma_get_sgtable()
have been broken by passing a physically contiguous vm_struct with an
invalid pages pointer through the common iommu API.
Since the coherent allocation with DMA_ATTR_FORCE_CONTIGUOUS uses CMA,
this patch simply reuses the existing swiotlb logic for mmap and
get_sgtable.
Note that the current implementation of get_sgtable (both swiotlb and
iommu) is broken if dma_declare_coherent_memory() is used since such
memory does not have a corresponding struct page. To be addressed in a
subsequent patch.
Fixes: 44176bb38fa4 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
According to the SDM, if the "activate secondary controls" primary
processor-based VM-execution control is 0, no checks are performed on
the secondary processor-based VM-execution controls.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware
drivers from Google, more auxdisplay drivers, extcon drivers, fpga
drivers, and a bunch of other driver updates. Nothing major, except if
you happen to have the hardware for these drivers, and then you will
be happy :)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
firmware: google memconsole: Fix return value check in platform_memconsole_init()
firmware: Google VPD: Fix return value check in vpd_platform_init()
goldfish_pipe: fix build warning about using too much stack.
goldfish_pipe: An implementation of more parallel pipe
fpga fr br: update supported version numbers
fpga: region: release FPGA region reference in error path
fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
mei: drop the TODO from samples
firmware: Google VPD sysfs driver
firmware: Google VPD: import lib_vpd source files
misc: lkdtm: Add volatile to intentional NULL pointer reference
eeprom: idt_89hpesx: Add OF device ID table
misc: ds1682: Add OF device ID table
misc: tsl2550: Add OF device ID table
w1: Remove unneeded use of assert() and remove w1_log.h
w1: Use kernel common min() implementation
uio_mf624: Align memory regions to page size and set correct offsets
uio_mf624: Refactor memory info initialization
uio: Allow handling of non page-aligned memory regions
hangcheck-timer: Fix typo in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here is the big USB patchset for 4.12-rc1.
Lots of good stuff here, after many many many attempts, the kernel
finally has a working typeC interface, many thanks to Heikki and
Guenter and others who have taken the time to get this merged. It
wasn't an easy path for them at all.
There's also a staging driver that uses this new api, which is why
it's coming in through this tree.
Along with that, there's the usual huge number of changes for gadget
drivers, xhci, and other stuff. Johan also finally refactored pretty
much every driver that was looking at USB endpoints to do it in a
common way, which will help prevent any "badly-formed" devices from
causing problems in drivers. That too wasn't a simple task.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
staging: typec: Fairchild FUSB302 Type-c chip driver
staging: typec: Type-C Port Controller Interface driver (tcpci)
staging: typec: USB Type-C Port Manager (tcpm)
usb: host: xhci: remove #ifdef around PM functions
usb: musb: don't mark of_dev_auxdata as initdata
usb: misc: legousbtower: Fix buffers on stack
USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
usb: Make sure usb/phy/of gets built-in
USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
usb: host: xhci: print correct command ring address
usb: host: xhci: delete sp_dma_buffers for scratchpad
usb: host: xhci: using correct specification chapter reference for DCBAAP
xhci: switch to pci_alloc_irq_vectors
usb: host: xhci-plat: set resume_quirk() for R-Car controllers
usb: host: xhci-plat: add resume_quirk()
usb: host: xhci-plat: enable clk in resume timing
usb: host: plat: Enable xHCI plat runtime PM
USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
USB: serial: constify static arrays
usb: fix some references for /proc/bus/usb
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-drivers update from Darren Hart:
"This represents a significantly larger and more complex set of changes
than those of prior merge windows.
In particular, we had several changes with dependencies on other
subsystems which we felt were best managed through merges of immutable
branches, including one each from input, i2c, and leds. Two patches
for the watchdog subsystem are included after discussion with Wim and
Guenter following a collision in linux-next (this should be resolved
and you should only see these two appear in this pull request). These
are called out in the "External" section below.
Summary of changes:
- significant further cleanup of fujitsu-laptop and hp-wmi
- new model support for ideapad, asus, silead, and xiaomi
- new hotkeys for thinkpad and models using intel-vbtn
- dell keyboard backlight improvements
- build and dependency improvements
- intel * ipc fixes, cleanups, and api updates
- single isolated fixes noted below
External:
- watchdog: iTCO_wdt: Add PMC specific noreboot update api
- watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
- Merge branch 'ib/4.10-sparse-keymap-managed'
- Merge branch 'i2c/for-INT33FE'
- Merge branch 'linux-leds/dell-laptop-changes-for-4.12'
platform/x86:
- Add Intel Cherry Trail ACPI INT33FE device driver
- remove sparse_keymap_free() calls
- Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD
asus-wmi:
- try to set als by default
- fix cpufv sysfs file permission
acer-wmi:
- setup accelerometer when ACPI device was found
ideapad-laptop:
- Add IdeaPad V310-15ISK to no_hw_rfkill
- Add IdeaPad 310-15IKB to no_hw_rfkill
intel_pmc_ipc:
- use gcr mem base for S0ix counter read
- Fix iTCO_wdt GCS memory mapping failure
- Add pmc gcr read/write/update api's
- fix gcr offset
dell-laptop:
- Add keyboard backlight timeout AC settings
- Handle return error form dell_get_intensity.
- Protect kbd_state against races
- Refactor kbd_led_triggers_store()
hp-wireless:
- reuse module_acpi_driver
- add Xiaomi's hardware id to the supported list
intel-vbtn:
- add volume up and down
INT33FE:
- add i2c dependency
hp-wmi:
- Cleanup exit paths
- Do not shadow errors in sysfs show functions
- Use DEVICE_ATTR_(RO|RW) helper macros
- Refactor dock and tablet state fetchers
- Cleanup wireless get_(hw|sw)state functions
- Refactor redundant HPWMI_READ functions
- Standardize enum usage for constants
- Cleanup local variable declarations
- Do not shadow error values
- Fix detection for dock and tablet mode
- Fix error value for hp_wmi_tablet_state
fujitsu-laptop:
- simplify error handling in acpi_fujitsu_laptop_add()
- do not log LED registration failures
- switch to managed LED class devices
- reorganize LED-related code
- refactor LED registration
- select LEDS_CLASS
- remove redundant fields from struct fujitsu_bl
- account for backlight power when determining brightness
- do not log set_lcd_level() failures in bl_update_status()
- ignore errors when setting backlight power
- make disable_brightness_adjust a boolean
- clean up use_alt_lcd_levels handling
- sync brightness in set_lcd_level()
- simplify set_lcd_level()
- merge set_lcd_level_alt() into set_lcd_level()
- switch to a managed backlight device
- only handle backlight when appropriate
- update debug message logged by call_fext_func()
- rename call_fext_func() arguments
- simplify call_fext_func()
- clean up local variables in call_fext_func()
- remove keycode fields from struct fujitsu_bl
- model-dependent sparse keymap overrides
- use a sparse keymap for hotkey event generation
- switch to a managed hotkey input device
- refactor hotkey input device setup
- use a sparse keymap for brightness key events
- switch to a managed backlight input device
- refactor backlight input device setup
- remove pf_device field from struct fujitsu_bl
- only register platform device if FUJ02E3 is present
- add and remove platform device in separate functions
- simplify platform device attribute definitions
- remove backlight-related attributes from the platform device
- cleanup error labels in fujitsu_init()
- only register backlight device if FUJ02B1 is present
- sync backlight power status in acpi_fujitsu_laptop_add()
- register backlight device in a separate function
- simplify brightness key event generation logic
- decrease indentation in acpi_fujitsu_bl_notify()
intel-hid:
- Add missing ->thaw callback
- do not set parents of input devices explicitly
- remove redundant set_bit() call
- use devm_input_allocate_device() for HID events input device
- make intel_hid_set_enable() take a boolean argument
- simplify enabling/disabling HID events
silead_dmi:
- Add touchscreen info for Surftab Wintron 7.0
- Abort early if DMI does not match
- Do not treat all devices as i2c_clients
- Add entry for Insyde 7W tablets
- Constify properties arrays
intel_scu_ipc:
- Introduce intel_scu_ipc_raw_command()
- Introduce SCU_DEVICE() macro
- Remove redundant subarch check
- Rearrange init sequence
- Platform data is mandatory
asus-nb-wmi:
- Add wapf4 quirk for the X302UA
dell-*:
- Call new led hw_changed API on kbd brightness change
- Add a generic dell-laptop notifier chain
eeepc-laptop:
- Skip unknown key messages 0x50 0x51
thinkpad_acpi:
- add mapping for new hotkeys
- guard generic hotkey case"
* tag 'platform-drivers-x86-v4.12-1' of git://git.infradead.org/linux-platform-drivers-x86: (108 commits)
platform/x86: Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD
platform/x86: asus-wmi: try to set als by default
platform/x86: asus-wmi: fix cpufv sysfs file permission
platform/x86: acer-wmi: setup accelerometer when ACPI device was found
platform/x86: ideapad-laptop: Add IdeaPad V310-15ISK to no_hw_rfkill
platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read
platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure
watchdog: iTCO_wdt: Add PMC specific noreboot update api
watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
platform/x86: intel_pmc_ipc: Add pmc gcr read/write/update api's
platform/x86: intel_pmc_ipc: fix gcr offset
platform/x86: dell-laptop: Add keyboard backlight timeout AC settings
platform/x86: dell-laptop: Handle return error form dell_get_intensity.
platform/x86: hp-wireless: reuse module_acpi_driver
platform/x86: intel-vbtn: add volume up and down
platform/x86: INT33FE: add i2c dependency
platform/x86: hp-wmi: Cleanup exit paths
platform/x86: hp-wmi: Do not shadow errors in sysfs show functions
platform/x86: hp-wmi: Use DEVICE_ATTR_(RO|RW) helper macros
platform/x86: hp-wmi: Refactor dock and tablet state fetchers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen fixes and featrues for 4.12. The main changes are:
- enable building the kernel with Xen support but without enabling
paravirtualized mode (Vitaly Kuznetsov)
- add a new 9pfs xen frontend driver (Stefano Stabellini)
- simplify Xen's cpuid handling by making use of cpu capabilities
(Juergen Gross)
- add/modify some headers for new Xen paravirtualized devices
(Oleksandr Andrushchenko)
- EFI reset_system support under Xen (Julien Grall)
- and the usual cleanups and corrections"
* tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits)
xen: Move xen_have_vector_callback definition to enlighten.c
xen: Implement EFI reset_system callback
arm/xen: Consolidate calls to shutdown hypercall in a single helper
xen: Export xen_reboot
xen/x86: Call xen_smp_intr_init_pv() on BSP
xen: Revert commits da72ff5bfcb0 and 72a9b186292d
xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams()
xen/scsifront: use offset_in_page() macro
xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND
x86/cpu: remove hypervisor specific set_cpu_features
vmware: set cpu capabilities during platform initialization
x86/xen: use capabilities instead of fake cpuid values for xsave
x86/xen: use capabilities instead of fake cpuid values for x2apic
x86/xen: use capabilities instead of fake cpuid values for mwait
x86/xen: use capabilities instead of fake cpuid values for acpi
x86/xen: use capabilities instead of fake cpuid values for acc
x86/xen: use capabilities instead of fake cpuid values for mtrr
x86/xen: use capabilities instead of fake cpuid values for aperf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features for this release:
- Pretty much a full rewrite of the processing of function plugins.
i.e. echo do_IRQ:stacktrace > set_ftrace_filter
- The rewrite was needed to add plugins to be unique to tracing
instances. i.e. mkdir instance/foo; cd instances/foo; echo
do_IRQ:stacktrace > set_ftrace_filter The old way was written very
hacky. This removes a lot of those hacks.
- New "function-fork" tracing option. When set, pids in the
set_ftrace_pid will have their children added when the processes
with their pids listed in the set_ftrace_pid file forks.
- Exposure of "maxactive" for kretprobe in kprobe_events
- Allow for builtin init functions to be traced by the function
tracer (via the kernel command line). Module init function tracing
will come in the next release.
- Added more selftests, and have selftests also test in an instance"
* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
ring-buffer: Return reader page back into existing ring buffer
selftests: ftrace: Allow some event trigger tests to run in an instance
selftests: ftrace: Have some basic tests run in a tracing instance too
selftests: ftrace: Have event tests also run in an tracing instance
selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
selftests: ftrace: Allow some tests to be run in a tracing instance
tracing/ftrace: Allow for instances to trigger their own stacktrace probes
tracing/ftrace: Allow for the traceonoff probe be unique to instances
tracing/ftrace: Enable snapshot function trigger to work with instances
tracing/ftrace: Allow instances to have their own function probes
tracing/ftrace: Add a better way to pass data via the probe functions
ftrace: Dynamically create the probe ftrace_ops for the trace_array
tracing: Pass the trace_array into ftrace_probe_ops functions
tracing: Have the trace_array hold the list of registered func probes
ftrace: If the hash for a probe fails to update then free what was initialized
ftrace: Have the function probes call their own function
ftrace: Have each function probe use its own ftrace_ops
ftrace: Have unregister_ftrace_function_probe_func() return a value
ftrace: Add helper function ftrace_hash_move_and_update_ops()
ftrace: Remove data field from ftrace_func_probe structure
...
|
|
Merge misc updates from Andrew Morton:
- a few misc things
- most of MM
- KASAN updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
kasan: separate report parts by empty lines
kasan: improve double-free report format
kasan: print page description after stacks
kasan: improve slab object description
kasan: change report header
kasan: simplify address description logic
kasan: change allocation and freeing stack traces headers
kasan: unify report headers
kasan: introduce helper functions for determining bug type
mm: hwpoison: call shake_page() after try_to_unmap() for mlocked page
mm: hwpoison: call shake_page() unconditionally
mm/swapfile.c: fix swap space leak in error path of swap_free_entries()
mm/gup.c: fix access_ok() argument type
mm/truncate: avoid pointless cleancache_invalidate_inode() calls.
mm/truncate: bail out early from invalidate_inode_pages2_range() if mapping is empty
fs/block_dev: always invalidate cleancache in invalidate_bdev()
fs: fix data invalidation in the cleancache during direct IO
zram: reduce load operation in page_same_filled
zram: use zram_free_page instead of open-coded
zram: introduce zram data accessor
...
|
|
In many of clk_disable() implementations, it is a no-op for a NULL
pointer input, but this is one of the exceptions.
Making it treewide consistent will allow clock consumers to call
clk_disable() without NULL pointer check.
Link: http://lkml.kernel.org/r/1490692624-11931-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Steven Miao <realmz6@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
- a big update from Mauro converting input documentation to ReST format
- Synaptics PS/2 is now aware of SMBus companion devices, which means
that we can now use native RMI4 protocol to handle touchpads, instead
of relying on legacy PS/2 mode.
- we removed support from BMA180 accelerometer from input devices as it
is now handled properly by IIO
- update to TSC2007 to corretcly report pressure
- other miscellaneous driver fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
Input: ar1021_i2c - use BIT to check for a bit
Input: twl4030-pwrbutton - use input_set_capability() helper
Input: twl4030-pwrbutton - use correct device for irq request
Input: ar1021_i2c - enable touch mode during open
Input: add uinput documentation
dt-bindings: input: add bindings document for ar1021_i2c driver
dt-bindings: input: rotary-encoder: fix typo
Input: xen-kbdfront - add module parameter for setting resolution
ARM: pxa/raumfeld: fix compile error in rotary controller resources
Input: xpad - do not suggest writing to Dominic
Input: xpad - don't use literal blocks inside footnotes
Input: xpad - note that usb/devices is now at /sys/kernel/debug/
Input: docs - freshen up introduction
Input: docs - split input docs into kernel- and user-facing
Input: docs - note that MT-A protocol is obsolete
Input: docs - update joystick documentation a bit
Input: docs - remove disclaimer/GPL notice
Input: fix "Game console" heading level in joystick documentation
Input: rotary-encoder - remove references to platform data from docs
Input: move documentation for Amiga CD32
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a lot going on with the regulator API for this release, much
more in the core than in the drivers for a change:
- Fixes for voltage change propagation through dumb power switches.
- A notification when regulators are enabled.
- A new settling time property for regulators where the time taken to
move to a new voltage is not related to the size of the change.
- Some reorganization of the Arizona drivers in preparation for
sharing the code with the next generation devices they've been
integrated with.
- Support for newer Freescale chips in the Anatop regulator.
- A new driver for voltage controlled regulators to cope with some
exciting ChromeOS hardware designs.
- Support for Rohm BD9571MWV-M and TI TPS65132"
* tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (51 commits)
regulator: Add ROHM BD9571MWV-M PMIC regulator driver
regulator: arizona-ldo1: Factor out generic initialization
regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona
regulator: arizona-ldo1: Move pdata into a separate structure
regulator: arizona-micsupp: Factor out generic initialization
regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona
regulator: arizona-micsupp: Move pdata into a separate structure
regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators
regulator: anatop: make regulator name property required
regulator: tps65023: Fix inverted core enable logic.
regulator: anatop: make sure regulator name is properly defined
regulator: core: Allow dummy regulators for supplies
regulator: core: Only propagate voltage changes to if it can change voltages
regulator: vctrl: Fix out of bounds array access for vctrl->vtable
regulator: tps65132: fix platform_no_drv_owner.cocci warnings
regulator: tps65132: Fix off-by-one for .max_register setting
regulator: anatop: set default voltage selector for pcie
regulator: tps65132: add device-tree binding
regulator: tps65132: add regulator driver for TI TPS65132
regulator: anatop: remove unneeded name field of struct anatop_regulator
...
|
|
Pull drm u pdates from Dave Airlie:
"This is the main drm pull request for v4.12. Apart from two fixes
pulls, everything should have been in drm-next for at least 2 weeks.
The biggest thing in here is AMD released the public headers for their
upcoming VEGA GPUs. These as always are quite a sizeable chunk of
header files. They've also added initial non-display support for those
GPUs, though they aren't available in production yet.
Otherwise it's pretty much normal.
New bridge drivers:
- megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
- generic LVDS bridge support.
Core:
- Displayport link train failure reporting to userspace
- debugfs interface cleaned up
- subsystem TODO in kerneldoc now
- Extended fbdev support (flipping and vblank wait)
- drm_platform removed
- EDP CRC support in helper
- HF-VSDB SCDC support in EDID parser
- Lots of code cleanups and header extraction
- Thunderbolt external GPU awareness
- Atomic helper improvements
- Documentation improvements
panel:
- Sitronix and Samsung new panel support
amdgpu:
- Preliminary vega10 support
- Multi-level page table support
- GPU sensor support for userspace
- PRT support for sparse buffers
- SR-IOV improvements
- Non-contig VRAM CPU mapping
i915:
- Atomic modesetting enabled by default on Gen5+
- LSPCON improvements
- Atomic state handling for cdclk
- GPU reset improvements
- In-kernel unit tests
- Geminilake improvements and color manager support
- Designware i2c fixes
- vblank evasion improvements
- Hotplug safe connector iterators
- GVT scheduler QoS support
- GVT Kabylake support
nouveau:
- Acceleration support for Pascal (GP10x).
- Rearchitecture of code handling proprietary signed firmware
- Fix GTX 970 with odd MMU configuration
- GP10B support
- GP107 acceleration support
vmwgfx:
- Atomic modesetting support for vmwgfx
omapdrm:
- Support for render nodes
- Refactor omapdss code
- Fix some probe ordering issues
- Fix too dark RGB565 rendering
sunxi:
- prelim rework for multiple pipes.
mali-dp:
- Color management support
- Plane scaling
- Power management improvements
imx-drm:
- Prefetch Resolve Engine/Gasket on i.MX6QP
- Deferred plane disabling
- Separate alpha support
mediatek:
- Mediatek SoC MT2701 support
rcar-du:
- Gen3 HDMI support
msm:
- 4k support for newer chips
- OPP bindings for gpu
- prep work for per-process pagetables
vc4:
- HDMI audio support
- fixes
qxl:
- minor fixes.
dw-hdmi:
- PHY improvements
- CSC fixes
- Amlogic GX SoC support"
* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
drm/nouveau/kms: Increase max retries in scanout position queries.
drm/nouveau/bios/bitP: check that table is long enough for optional pointers
drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
drm: mali-dp: use div_u64 for expensive 64-bit divisions
drm/i915: Confirm the request is still active before adding it to the await
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
drm/i915/selftests: Allocate inode/file dynamically
drm/i915: Fix system hang with EI UP masked on Haswell
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
drm/i915: Perform link quality check unconditionally during long pulse
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
drm/i915: Use the right mapping_gfp_mask for final shmem allocation
drm/i915: Make legacy cursor updates more unsynced
drm/i915: Apply a cond_resched() to the saturated signaler
drm/i915: Park the signaler before sleeping
drm: mali-dp: Check the mclk rate and allow up/down scaling
drm: mali-dp: Enable image enhancement when scaling
drm: mali-dp: Add plane upscaling support
...
|
|
This reverts commit bbd6411513aa8ef3ea02abab61318daf87c1af1e.
I've been sitting on this revert for too long and it unfortunately
missed 4.11. It's also the reason why I haven't merged ring-based
dirty tracking for 4.12.
Using kvm_vcpu_memslots in kvm_gfn_to_hva_cache_init and
kvm_vcpu_write_guest_offset_cached means that the MSR value can
now be used to access SMRAM, simply by making it point to an SMRAM
physical address. This is problematic because it lets the guest
OS overwrite memory that it shouldn't be able to touch.
Cc: stable@vger.kernel.org
Fixes: bbd6411513aa8ef3ea02abab61318daf87c1af1e
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits,
so don't set them on Power9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 616badd2fb49 ("powerpc/powernv: Use OPAL call for TCE kill on
NVLink2") forced all TCE kills to go via the OPAL call for
NVLink2. However the PHB3 implementation of TCE kill was still being
called directly from some functions which in some circumstances caused
a machine check.
This patch adds an equivalent IODA2 version of the function which uses
the correct invalidation method depending on PHB model and changes all
external callers to use it instead.
Fixes: 616badd2fb49 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently the radix TLB code includes support for CPUs that do *not*
have MMU_FTR_LOCKLESS_TLBIE. On those CPUs we are required to take a
global spinlock before issuing a tlbie.
Radix can only be built for 64-bit Book3s CPUs, and of those, only
POWER4, 970, Cell and PA6T do not have MMU_FTR_LOCKLESS_TLBIE. Although
it's possible to build a kernel with Radix support that can also boot on
those CPUs, we happen to know that in reality none of those CPUs support
the Radix MMU, so the code can never actually run on those CPUs.
So remove the native_tlbie_lock in the Radix TLB code.
Note that there is another lock of the same name in the hash code, which
is unaffected by this patch.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 84d582d236dc ("xen: Revert commits da72ff5bfcb0 and
72a9b186292d") defined xen_have_vector_callback in enlighten_hvm.c.
Since guest-type-neutral code refers to this variable this causes
build failures when CONFIG_XEN_PVHVM is not defined.
Moving xen_have_vector_callback definition to enlighten.c resolves
this issue.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
machine_check_early() gets called in real mode. The very first time when
add_taint() is called, it prints a warning which ends up calling opal
call (that uses OPAL_CALL wrapper) for writing it to console. If we get a
very first machine check while we are in opal we are doomed. OPAL_CALL
overwrites the PACASAVEDMSR in r13 and in this case when we are done with
MCE handling the original opal call will use this new MSR on it's way
back to opal_return. This usually leads to unexpected behaviour or the
kernel to panic. Instead move the add_taint() call later in the virtual
mode where it is safe to call.
This is broken with current FW level. We got lucky so far for not getting
very first MCE hit while in OPAL. But easily reproducible on Mambo.
Fixes: 27ea2c420cad ("powerpc: Set the correct kernel taint on machine check errors.")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The entire body of unregister_cpu_online() is inside an #ifdef
CONFIG_HOTPLUG_CPU block. This is ugly and means we create an empty function
when hotplug is disabled for no reason.
Instead move the #ifdef out of the function body and define the function to be
NULL in the else case. This means we'll pass NULL to cpuhp_setup_state(), but
that's fine because it accepts NULL to mean there is no teardown callback, which
is exactly what we want.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This code was until recently completely undocumented and even now the comment is
not very verbose.
We've already had one patch sent to remove the IRQ enable/disable because it's
"paradoxical and unnecessary". So document it thoroughly to save anyone else
from puzzling over it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Otherwise we might select it when its dependenices aren't enabled,
leading to a build break.
It's default y anyway, so will be on unless someone disables it
manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
pnv_eeh_reset() has special handling for PEs whose primary bus is the
root bus or the bus immediately underneath the root port.
The cxl bi-modal card support added in b0b5e5918ad1 ("cxl: Add
cxl_check_and_switch_mode() API to switch bi-modal cards") relies on
this behaviour when hot-resetting the CAPI adapter following a mode
switch. Document this in pnv_eeh_reset() so we don't accidentally break
it.
Suggested-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatch updates from Jiri Kosina:
- a per-task consistency model is being added for architectures that
support reliable stack dumping (extending this, currently rather
trivial set, is currently in the works).
This extends the nature of the types of patches that can be applied
by live patching infrastructure. The code stems from the design
proposal made [1] back in November 2014. It's a hybrid of SUSE's
kGraft and RH's kpatch, combining advantages of both: it uses
kGraft's per-task consistency and syscall barrier switching combined
with kpatch's stack trace switching. There are also a number of
fallback options which make it quite flexible.
Most of the heavy lifting done by Josh Poimboeuf with help from
Miroslav Benes and Petr Mladek
[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz
- module load time patch optimization from Zhou Chengming
- a few assorted small fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add missing printk newlines
livepatch: Cancel transition a safe way for immediate patches
livepatch: Reduce the time of finding module symbols
livepatch: make klp_mutex proper part of API
livepatch: allow removal of a disabled patch
livepatch: add /proc/<pid>/patch_state
livepatch: change to a per-task consistency model
livepatch: store function sizes
livepatch: use kstrtobool() in enabled_store()
livepatch: move patching functions into patch.c
livepatch: remove unnecessary object loaded check
livepatch: separate enabled and patched states
livepatch/s390: add TIF_PATCH_PENDING thread flag
livepatch/s390: reorganize TIF thread flag bits
livepatch/powerpc: add TIF_PATCH_PENDING thread flag
livepatch/x86: add TIF_PATCH_PENDING thread flag
livepatch: create temporary klp_update_patch_state() stub
x86/entry: define _TIF_ALLWORK_MASK flags explicitly
stacktrace/x86: add function for detecting reliable stack traces
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.12 cycle.
The extra week before the merge window actually resulted in some of
the type of fixes that usually arrive after the merge window already
starting to trickle in from eager developers using -next, I'm
impressed.
I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
with the onset of Samsung patches. It works great.
Apart from that it is a boring round, just incremental updates and
fixes all over the place, no serious core changes or anything exciting
like that. The most pleasing to see is Julia Cartwrights work to audit
the irqchip-providing drivers for realtime locking compliance. It's
one of those "I should really get around to looking into that" things
that have been on my TODO list since forever.
Summary:
Core changes:
- add bi-directional and output-enable pin configurations to the
generic bindings and generic pin controlling core.
New drivers or subdrivers:
- Armada 37xx SoC pin controller and GPIO support.
- Axis ARTPEC-6 SoC pin controller support.
- AllWinner A64 R_PIO controller support, and opening up the
AllWinner sunxi driver for ARM64 use.
- Rockchip RK3328 support.
- Renesas R-Car H3 ES2.0 support.
- STM32F469 support in the STM32 driver.
- Aspeed G4 and G5 pin controller support.
Improvements:
- a whole slew of realtime improvements to drivers implementing
irqchips: BCM, AMD, SiRF, sunxi, rockchip.
- switch meson driver to get the GPIO ranges from the device tree.
- input schmitt trigger support on the Rockchip driver.
- enable the sunxi (AllWinner) driver to also be used on ARM64
silicon.
- name the Qualcomm QDF2xxx GPIO lines.
- support GMMR GPIO regions on the Intel Cherryview. This fixes a
serialization problem on these platforms.
- pad retention support for the Samsung Exynos 5433.
- handle suspend-to-ram in the AT91-pio4 driver.
- pin configuration support in the Aspeed driver.
Cleanups:
- the final name of Rockchip RK1108 was RV1108 so rename the driver
and variables to stay consistent"
* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mediatek: Add missing pinctrl bindings for mt7623
pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
pinctrl: artpec6: Remove .owner field for driver
pinctrl: tegra: xusb: Silence sparse warnings
ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
pinctrl: make artpec6 explicitly non-modular
pinctrl: aspeed: g5: Add pinconf support
pinctrl: aspeed: g4: Add pinconf support
pinctrl: aspeed: Add core pinconf support
pinctrl: aspeed: Document pinconf in devicetree bindings
pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
pinctrl: stm32: Add STM32F469 MCU support
Documentation: dt: Remove ngpios from stm32-pinctrl binding
pinctrl: stm32: replace device_initcall() with arch_initcall()
pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
pinctrl: armada-37xx: Add gpio support
pinctrl: armada-37xx: Add pin controller support for Armada 37xx
pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
pinctrl: core: Make pinctrl_init_controller() static
pinctrl: generic: Add bi-directional and output-enable
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Continue to re-factor code to prepare for eMMC CMDQ and blkmq support
- Introduce queue semantics to prepare for eMMC CMDQ and blkmq support
- Add helper functions to manage temporary enable/disable of eMMC CMDQ
- Improve wait-busy detection for SDIO
MMC host:
- cavium: Add driver to support Cavium controllers
- cavium: Extend Cavium driver to support Octeon and ThunderX SOCs
- bcm2835: Add new driver for Broadcom BCM2835 controller
- sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller
- sdhci-tegra: Add support for the Tegra186 variant
- sdhci-of-esdhc: Support for UHS-I SD cards
- sdhci-of-esdhc: Support for eMMC HS200 cards
- sdhci-cadence: Add eMMC HS400 enhanced strobe support
- sdhci-esdhc-imx: Reset tuning circuit when needed
- sdhci-pci: Modernize and clean-up some PM related code
- sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices
- sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers
- sdhci: Re-factoring and modernizations
- sdhci: Optimize delay loops
- sdhci: Improve register dump print format
- sdhci: Add support for the Command Queue Engine
- meson-gx: Various improvements and clean-ups
- meson-gx: Add support for CMD23
- meson-gx: Basic tuning support to avoid CRC errors
- s3cmci: Enable probing via DT
- mediatek: Improve tuning support for eMMC HS200 and HS400 mode
- tmio: Improve DMA support
- tmio: Use correct response for CMD12
- dw_mmc: Minor improvements and clean-ups"
* tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits)
mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay
mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY
mmc: sdhci-xenon: Fix the work flow in xenon_remove().
MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC
mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data()
mmc: cavium: Use module_pci_driver to simplify the code
mmc: cavium: Add MMC support for Octeon SOCs.
mmc: cavium: Fix detection of block or byte addressing.
mmc: core: Export API to allow hosts to get the card address
mmc: sdio: Fix sdio wait busy implement limitation
mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card
clk: apn806: fix spelling mistake: "mising" -> "missing"
mmc: sdhci-of-esdhc: add delay between tuning cycles
mmc: sdhci: Control the delay between tuning commands
mmc: sdhci-of-esdhc: add tuning support
mmc: sdhci-of-esdhc: add support for signal voltage switch
mmc: sdhci-of-esdhc: add peripheral clock support
mmc: sdhci-pci: Allow for 3 bytes from Intel DSM
mmc: cavium: Fix a shift wrapping bug
...
|
|
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
|
|
When the instruction right before the branch destination is
a 64 bit load immediate, we currently calculate the wrong
jump offset in the ctx->offset[] array as we only account
one instruction slot for the 64 bit load immediate although
it uses two BPF instructions. Fix it up by setting the offset
into the right slot after we incremented the index.
Before (ldimm64 test 1):
[...]
00000020: 52800007 mov w7, #0x0 // #0
00000024: d2800060 mov x0, #0x3 // #3
00000028: d2800041 mov x1, #0x2 // #2
0000002c: eb01001f cmp x0, x1
00000030: 54ffff82 b.cs 0x00000020
00000034: d29fffe7 mov x7, #0xffff // #65535
00000038: f2bfffe7 movk x7, #0xffff, lsl #16
0000003c: f2dfffe7 movk x7, #0xffff, lsl #32
00000040: f2ffffe7 movk x7, #0xffff, lsl #48
00000044: d29dddc7 mov x7, #0xeeee // #61166
00000048: f2bdddc7 movk x7, #0xeeee, lsl #16
0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32
00000050: f2fdddc7 movk x7, #0xeeee, lsl #48
[...]
After (ldimm64 test 1):
[...]
00000020: 52800007 mov w7, #0x0 // #0
00000024: d2800060 mov x0, #0x3 // #3
00000028: d2800041 mov x1, #0x2 // #2
0000002c: eb01001f cmp x0, x1
00000030: 540000a2 b.cs 0x00000044
00000034: d29fffe7 mov x7, #0xffff // #65535
00000038: f2bfffe7 movk x7, #0xffff, lsl #16
0000003c: f2dfffe7 movk x7, #0xffff, lsl #32
00000040: f2ffffe7 movk x7, #0xffff, lsl #48
00000044: d29dddc7 mov x7, #0xeeee // #61166
00000048: f2bdddc7 movk x7, #0xeeee, lsl #16
0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32
00000050: f2fdddc7 movk x7, #0xeeee, lsl #48
[...]
Also, add a couple of test cases to make sure JITs pass
this test. Tested on Cavium ThunderX ARMv8. The added
test cases all pass after the fix.
Fixes: 8eee539ddea0 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()")
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This work adds BPF_XADD for BPF_W/BPF_DW to the arm64 JIT and therefore
completes JITing of all BPF instructions, meaning we can thus also remove
the 'notyet' label and do not need to fall back to the interpreter when
BPF_XADD is used in a program!
This now also brings arm64 JIT in line with x86_64, s390x, ppc64, sparc64,
where all current eBPF features are supported.
BPF_W example from test_bpf:
.u.insns_int = {
BPF_ALU32_IMM(BPF_MOV, R0, 0x12),
BPF_ST_MEM(BPF_W, R10, -40, 0x10),
BPF_STX_XADD(BPF_W, R10, R0, -40),
BPF_LDX_MEM(BPF_W, R0, R10, -40),
BPF_EXIT_INSN(),
},
[...]
00000020: 52800247 mov w7, #0x12 // #18
00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40
00000028: d280020a mov x10, #0x10 // #16
0000002c: b82b6b2a str w10, [x25,x11]
// start of xadd mapping:
00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40
00000034: 8b19014a add x10, x10, x25
00000038: f9800151 prfm pstl1strm, [x10]
0000003c: 885f7d4b ldxr w11, [x10]
00000040: 0b07016b add w11, w11, w7
00000044: 880b7d4b stxr w11, w11, [x10]
00000048: 35ffffab cbnz w11, 0x0000003c
// end of xadd mapping:
[...]
BPF_DW example from test_bpf:
.u.insns_int = {
BPF_ALU32_IMM(BPF_MOV, R0, 0x12),
BPF_ST_MEM(BPF_DW, R10, -40, 0x10),
BPF_STX_XADD(BPF_DW, R10, R0, -40),
BPF_LDX_MEM(BPF_DW, R0, R10, -40),
BPF_EXIT_INSN(),
},
[...]
00000020: 52800247 mov w7, #0x12 // #18
00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40
00000028: d280020a mov x10, #0x10 // #16
0000002c: f82b6b2a str x10, [x25,x11]
// start of xadd mapping:
00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40
00000034: 8b19014a add x10, x10, x25
00000038: f9800151 prfm pstl1strm, [x10]
0000003c: c85f7d4b ldxr x11, [x10]
00000040: 8b07016b add x11, x11, x7
00000044: c80b7d4b stxr w11, x11, [x10]
00000048: 35ffffab cbnz w11, 0x0000003c
// end of xadd mapping:
[...]
Tested on Cavium ThunderX ARMv8, test suite results after the patch:
No JIT: [ 3751.855362] test_bpf: Summary: 311 PASSED, 0 FAILED, [0/303 JIT'ed]
With JIT: [ 3573.759527] test_bpf: Summary: 311 PASSED, 0 FAILED, [303/303 JIT'ed]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fs/compat.c cleanups from Al Viro:
"More moving of compat syscalls from fs/compat.c to fs/*.c where the
native counterparts live.
And death to compat_sys_getdents64() - the only architecture that used
to need it was ia64, and _that_ has lost biarch support quite a few
years ago"
* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/compat.c: trim unused includes
move compat_rw_copy_check_uvector() over to fs/read_write.c
fhandle: move compat syscalls from compat.c
open: move compat syscalls from compat.c
stat: move compat syscalls from compat.c
fcntl: move compat syscalls from compat.c
readdir: move compat syscalls from compat.c
statfs: move compat syscalls from compat.c
utimes: move compat syscalls from compat.c
move compat select-related syscalls to fs/select.c
Remove compat_sys_getdents64()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy updates from Kees Cook:
"A couple hardened usercopy changes:
- drop now unneeded is_vmalloc_or_module() check (Laura Abbott)
- use enum instead of literals for stack frame API (Sahara)"
* tag 'usercopy-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mm/usercopy: Drop extra is_vmalloc_or_module() check
usercopy: Move enum for arch_within_stack_frames()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"This has a large internal refactoring along with several smaller
fixes.
- constify compression structures; Bhumika Goyal
- restore powerpc dumping; Ankit Kumar
- fix more bugs in the rarely exercises module unloading logic
- reorganize filesystem locking to fix problems noticed by lockdep
- refactor internal pstore APIs to make development and review
easier:
- improve error reporting
- add kernel-doc structure and function comments
- avoid insane argument passing by using a common record
structure"
* tag 'pstore-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
pstore: Solve lockdep warning by moving inode locks
pstore: Fix flags to enable dumps on powerpc
pstore: Remove unused vmalloc.h in pmsg
pstore: simplify write_user_compat()
pstore: Remove write_buf() callback
pstore: Replace arguments for write_buf_user() API
pstore: Replace arguments for write_buf() API
pstore: Replace arguments for erase() API
pstore: Do not duplicate record metadata
pstore: Allocate records on heap instead of stack
pstore: Pass record contents instead of copying
pstore: Always allocate buffer for decompression
pstore: Replace arguments for write() API
pstore: Replace arguments for read() API
pstore: Switch pstore_mkfile to pass record
pstore: Move record decompression to function
pstore: Extract common arguments into structure
pstore: Add kernel-doc for struct pstore_info
pstore: Improve register_pstore() error reporting
pstore: Avoid race in module unloading
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- more kernel message modernizations and cleanups
- Mac and Nubus improvements and cleanups.
* tag 'm68k-for-v4.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
nubus: Add MVC and VSC video card definitions
nubus: Clean up whitespace
nubus: Clean up printk calls
nubus: Fix nubus_rewinddir
m68k/mac: Clarify IOP message alloc/free confusion
m68k/mac: Adopt platform_device_register_simple()
m68k/mac: Modernize printing of kernel messages
m68k/mac: IOP - Modernize printing of kernel messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- three merges for KVM/s390 with changes for vfio-ccw and cpacf. The
patches are included in the KVM tree as well, let git sort it out.
- add the new 'trng' random number generator
- provide the secure key verification API for the pkey interface
- introduce the z13 cpu counters to perf
- add a new system call to set up the guarded storage facility
- simplify TASK_SIZE and arch_get_unmapped_area
- export the raw STSI data related to CPU topology to user space
- ... and the usual churn of bug-fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/crypt: use the correct module alias for paes_s390.
s390/cpacf: Introduce kma instruction
s390/cpacf: query instructions use unique parameters for compatibility with KMA
s390/trng: Introduce s390 TRNG device driver.
s390/crypto: Provide s390 specific arch random functionality.
s390/crypto: Add new subfunctions to the cpacf PRNO function.
s390/crypto: Renaming PPNO to PRNO.
s390/pageattr: avoid unnecessary page table splitting
s390/mm: simplify arch_get_unmapped_area[_topdown]
s390/mm: make TASK_SIZE independent from the number of page table levels
s390/gs: add regset for the guarded storage broadcast control block
s390/kvm: Add use_cmma field to mm_context_t
s390/kvm: Add PGSTE manipulation functions
vfio: ccw: improve error handling for vfio_ccw_mdev_remove
vfio: ccw: remove unnecessary NULL checks of a pointer
s390/spinlock: remove compare and delay instruction
s390/spinlock: use atomic primitives for spinlocks
s390/cpumf: simplify detection of guest samples
s390/pci: remove forward declaration
s390/pci: increase the PCI_NR_FUNCTIONS default
...
|
|
We needed the lock to avoid racing with creation of the irqchip on x86. As
kvm_set_irq_routing() calls srcu_synchronize_expedited(), this lock
might be held for a longer time.
Let's introduce an arch specific callback to check if we can actually
add irq routes. For x86, all we have to do is check if we have an
irqchip in the kernel. We don't need kvm->lock at that point as the
irqchip is marked as inititalized only when actually fully created.
Reported-by: Steve Rutherford <srutherford@google.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Fixes: 1df6ddede10a ("KVM: x86: race between KVM_SET_GSI_ROUTING and KVM_CREATE_IRQCHIP")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove unnecessary tags in eeh_handle_normal_event(), and add function
comments for eeh_handle_normal_event() and eeh_handle_special_event().
The only functional difference is that in the case of a PE reaching the
maximum number of failures, rather than one message telling you of this
and suggesting you reseat the device, there are two separate messages.
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
eeh_handle_special_event() is called when an EEH event is detected but
can't be narrowed down to a specific PE. This function looks through
every PE to find one in an erroneous state, then calls the regular event
handler eeh_handle_normal_event() once it knows which PE has an error.
However, if eeh_handle_normal_event() found that the PE cannot possibly
be recovered, it will free it, rendering the passed PE stale.
This leads to a use after free in eeh_handle_special_event() as it attempts to
clear the "recovering" state on the PE after eeh_handle_normal_event() returns.
Thus, make sure the PE is valid when attempting to clear state in
eeh_handle_special_event().
Fixes: 8a6b1bc70dbb ("powerpc/eeh: EEH core to handle special event")
Cc: stable@vger.kernel.org # v3.11+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When rebooting DOM0 with ACPI on ARM64, the kernel is crashing with the stack
trace [1].
This is happening because when EFI runtimes are enabled, the reset code
(see machine_restart) will first try to use EFI restart method.
However, the EFI restart code is expecting the reset_system callback to
be always set. This is not the case for Xen and will lead to crash.
The EFI restart helper is used in multiple places and some of them don't
not have fallback (see machine_power_off). So implement reset_system
callback as a call to xen_reboot when using EFI Xen.
[ 36.999270] reboot: Restarting system
[ 37.002921] Internal error: Attempting to execute userspace memory: 86000004 [#1] PREEMPT SMP
[ 37.011460] Modules linked in:
[ 37.014598] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.11.0-rc1-00003-g1e248b60a39b-dirty #506
[ 37.023903] Hardware name: (null) (DT)
[ 37.027734] task: ffff800902068000 task.stack: ffff800902064000
[ 37.033739] PC is at 0x0
[ 37.036359] LR is at efi_reboot+0x94/0xd0
[ 37.040438] pc : [<0000000000000000>] lr : [<ffff00000880f2c4>] pstate: 404001c5
[ 37.047920] sp : ffff800902067cf0
[ 37.051314] x29: ffff800902067cf0 x28: ffff800902068000
[ 37.056709] x27: ffff000008992000 x26: 000000000000008e
[ 37.062104] x25: 0000000000000123 x24: 0000000000000015
[ 37.067499] x23: 0000000000000000 x22: ffff000008e6e250
[ 37.072894] x21: ffff000008e6e000 x20: 0000000000000000
[ 37.078289] x19: ffff000008e5d4c8 x18: 0000000000000010
[ 37.083684] x17: 0000ffffa7c27470 x16: 00000000deadbeef
[ 37.089079] x15: 0000000000000006 x14: ffff000088f42bef
[ 37.094474] x13: ffff000008f42bfd x12: ffff000008e706c0
[ 37.099870] x11: ffff000008e70000 x10: 0000000005f5e0ff
[ 37.105265] x9 : ffff800902067a50 x8 : 6974726174736552
[ 37.110660] x7 : ffff000008cc6fb8 x6 : ffff000008cc6fb0
[ 37.116055] x5 : ffff000008c97dd8 x4 : 0000000000000000
[ 37.121453] x3 : 0000000000000000 x2 : 0000000000000000
[ 37.126845] x1 : 0000000000000000 x0 : 0000000000000000
[ 37.132239]
[ 37.133808] Process systemd-shutdow (pid: 1, stack limit = 0xffff800902064000)
[ 37.141118] Stack: (0xffff800902067cf0 to 0xffff800902068000)
[ 37.146949] 7ce0: ffff800902067d40 ffff000008085334
[ 37.154869] 7d00: 0000000000000000 ffff000008f3b000 ffff800902067d40 ffff0000080852e0
[ 37.162787] 7d20: ffff000008cc6fb0 ffff000008cc6fb8 ffff000008c7f580 ffff000008c97dd8
[ 37.170706] 7d40: ffff800902067d60 ffff0000080e2c2c 0000000000000000 0000000001234567
[ 37.178624] 7d60: ffff800902067d80 ffff0000080e2ee8 0000000000000000 ffff0000080e2df4
[ 37.186544] 7d80: 0000000000000000 ffff0000080830f0 0000000000000000 00008008ff1c1000
[ 37.194462] 7da0: ffffffffffffffff 0000ffffa7c4b1cc 0000000000000000 0000000000000024
[ 37.202380] 7dc0: ffff800902067dd0 0000000000000005 0000fffff24743c8 0000000000000004
[ 37.210299] 7de0: 0000fffff2475f03 0000000000000010 0000fffff2474418 0000000000000005
[ 37.218218] 7e00: 0000fffff2474578 000000000000000a 0000aaaad6b722c0 0000000000000001
[ 37.226136] 7e20: 0000000000000123 0000000000000038 ffff800902067e50 ffff0000081e7294
[ 37.234055] 7e40: ffff800902067e60 ffff0000081e935c ffff800902067e60 ffff0000081e9388
[ 37.241973] 7e60: ffff800902067eb0 ffff0000081ea388 0000000000000000 00008008ff1c1000
[ 37.249892] 7e80: ffffffffffffffff 0000ffffa7c4a79c 0000000000000000 ffff000000020000
[ 37.257810] 7ea0: 0000010000000004 0000000000000000 0000000000000000 ffff0000080830f0
[ 37.265729] 7ec0: fffffffffee1dead 0000000028121969 0000000001234567 0000000000000000
[ 37.273651] 7ee0: ffffffffffffffff 8080000000800000 0000800000008080 feffa9a9d4ff2d66
[ 37.281567] 7f00: 000000000000008e feffa9a9d5b60e0f 7f7fffffffff7f7f 0101010101010101
[ 37.289485] 7f20: 0000000000000010 0000000000000008 000000000000003a 0000ffffa7ccf588
[ 37.297404] 7f40: 0000aaaad6b87d00 0000ffffa7c4b1b0 0000fffff2474be0 0000aaaad6b88000
[ 37.305326] 7f60: 0000fffff2474fb0 0000000001234567 0000000000000000 0000000000000000
[ 37.313240] 7f80: 0000000000000000 0000000000000001 0000aaaad6b70d4d 0000000000000000
[ 37.321159] 7fa0: 0000000000000001 0000fffff2474ea0 0000aaaad6b5e2e0 0000fffff2474e80
[ 37.329078] 7fc0: 0000ffffa7c4b1cc 0000000000000000 fffffffffee1dead 000000000000008e
[ 37.336997] 7fe0: 0000000000000000 0000000000000000 9ce839cffee77eab fafdbf9f7ed57f2f
[ 37.344911] Call trace:
[ 37.347437] Exception stack(0xffff800902067b20 to 0xffff800902067c50)
[ 37.353970] 7b20: ffff000008e5d4c8 0001000000000000 0000000080f82000 0000000000000000
[ 37.361883] 7b40: ffff800902067b60 ffff000008e17000 ffff000008f44c68 00000001081081b4
[ 37.369802] 7b60: ffff800902067bf0 ffff000008108478 0000000000000000 ffff000008c235b0
[ 37.377721] 7b80: ffff800902067ce0 0000000000000000 0000000000000000 0000000000000015
[ 37.385643] 7ba0: 0000000000000123 000000000000008e ffff000008992000 ffff800902068000
[ 37.393557] 7bc0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 37.401477] 7be0: 0000000000000000 ffff000008c97dd8 ffff000008cc6fb0 ffff000008cc6fb8
[ 37.409396] 7c00: 6974726174736552 ffff800902067a50 0000000005f5e0ff ffff000008e70000
[ 37.417318] 7c20: ffff000008e706c0 ffff000008f42bfd ffff000088f42bef 0000000000000006
[ 37.425234] 7c40: 00000000deadbeef 0000ffffa7c27470
[ 37.430190] [< (null)>] (null)
[ 37.434982] [<ffff000008085334>] machine_restart+0x6c/0x70
[ 37.440550] [<ffff0000080e2c2c>] kernel_restart+0x6c/0x78
[ 37.446030] [<ffff0000080e2ee8>] SyS_reboot+0x130/0x228
[ 37.451337] [<ffff0000080830f0>] el0_svc_naked+0x24/0x28
[ 37.456737] Code: bad PC value
[ 37.459891] ---[ end trace 76e2fc17e050aecd ]---
Signed-off-by: Julien Grall <julien.grall@arm.com>
--
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
The x86 code has theoritically a similar issue, altought EFI does not
seem to be the preferred method. I have only built test it on x86.
This should also probably be fixed in stable tree.
Changes in v2:
- Implement xen_efi_reset_system using xen_reboot
- Move xen_efi_reset_system in drivers/xen/efi.c
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
