summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-11-28Merge tag 'armsoc-for-rc7' of ↵Linus Torvalds5-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Not much interesting going on fixes-wise for us this week, as it should be for an -rc7. I'm not expecting Olof to work much over Thanksgiving weekend, so I decided to take over again and push these out to you. Just four simple fixes this week: - one missing of_node_put() on armv7 based mvebu - forcing the USB host into the right mode on Chromebook (exynos5-snow) - enabling two important drivers for exynos_defconfig - fixing a noncritical bug for tegra that would cause a regression with common code patches queued for 3.19" * tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: irq: fix buggy usage of irq_data irq field ARM: exynos_defconfig: Enable max77802 rtc and clock drivers ARM: dts: Explicitly set dr_mode on exynos5250-snow ARM: mvebu: add missing of_node_put() call in coherency.c
2014-11-28Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds4-44/+4
Pull ARM fixes from Russell King: "Another round of relatively small ARM fixes. Thomas spotted that the strex backoff delay bit was a disable bit, so it needed to be clear for this to work. Vladimir spotted that using a restart block for the cache flush operation would return -EINTR, which userspace was not expecting. Dmitry spotted that the auxiliary control register accesses for Xscale were not correct" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8226/1: cacheflush: get rid of restarting block ARM: 8222/1: mvebu: enable strex backoff delay ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
2014-11-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds15-31/+84
Pull mips fixes from Ralf Baechle: "The hopefully final round of fixes for 3.18: - Fix a number of build errors affecting particular configurations. - Handle EVA correctly when flushing a signal trampoline and dcache lines. - Fix printks printing jibberish. - Handle 64 bit memory addresses correctly when adding memory chunk on 32 bit kernels. - Fix a race condition in the hardware tablewalker code" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers MIPS: Fix address type used for early memory detection. MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected. MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE MIPS: Netlogic: handle modular AHCI builds MIPS: Netlogic: handle modular USB case MIPS: Loongson: Make platform serial setup always built-in. MIPS: fix EVA & non-SMP non-FPU FP context signal handling MIPS: cpu-probe: Set the FTLB probability bit on supported cores MIPS: BMIPS: Fix ".previous without corresponding .section" warnings MIPS: uaccess.h: Fix strnlen_user comment. MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line MIPS: Fix info about plat_setup in arch_mem_init comment MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c MIPS: SEAD3: Fix LED device registration. MIPS: Fix a copy & paste error in unistd.h
2014-11-27Merge branch 'for-linus' of ↵Linus Torvalds5-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "Here are five fixes for you to pull please. They're all CC'ed to stable except the "Fix PE state format" one which went in this release" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: 32 bit getcpu VDSO function uses 64 bit instructions powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE powerpc/eeh: Fix PE state format powerpc/pseries: Fix endiannes issue in RTAS call from xmon powerpc/powernv: Fix the hmi event version check.
2014-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-0/+8
Pull sparc fixlet from David Miller: "Aparc fix to add dma_cache_sync(), even if a nop it should be provided if dma_{alloc,free}_noncoherent() is provided too" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add NOP dma_cache_sync() implementation.
2014-11-27MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlersLeonid Yegoshin1-1/+9
There is a potential race when probing the TLB in TLBL/M/S exception handlers for a matching entry. Between the time we hit a TLBL/S/M exception and the time we get to execute the TLBP instruction, the HTW may have replaced the TLB entry we are interested in hence the TLB probe may fail. However, in the existing handlers, we never checked the status of the TLBP (ie check the result in the C0/Index register). We fix this by adding such a check when the core implements the HTW. If we couldn't find a matching entry, we return back and try again. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8599/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-27ARM: 8226/1: cacheflush: get rid of restarting blockVladimir Murzin2-40/+2
We cannot restart cacheflush safely if a process provides user-defined signal handler and signal is pending. In this case -EINTR is returned and it is expected that process re-invokes syscall. However, there are a few problems with that: * looks like nobody bothers checking return value from cacheflush * but if it did, we don't provide the restart address for that, so the process has to use the same range again * ...and again, what might lead to looping forever So, remove cacheflush restarting code and terminate cache flushing as early as fatal signal is pending. Cc: stable@vger.kernel.org # 3.12+ Reported-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27ARM: 8222/1: mvebu: enable strex backoff delayThomas Petazzoni1-2/+0
Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de4901933f6d ("arm: mm: Add support for PJ4B cpu and init routines") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27Merge tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann1-0/+2
Pull "mvebu fixes for v3.18 (round 2)" frm Jason Cooper: - mvebu - coherency.c needed an of_node_put() * tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add missing of_node_put() call in coherency.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-defconfig-v3.18' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung defconfig update for v3.18" from Kukjin Kim: - enable max77802 rtc and clock drivers for exynos_defconfig : enable the kernel config options to have the drivers for max77802 including rtc and 2-ch 32kHz clock outputs * tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-fixes-v3.18' of ↵Arnd Bergmann2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung fixes for v3.18" from Kukjin Kim: - explicitly set dr_mode on exynos5250-snow this is required when kernel is built with USB gadget support. * tag 'samsung-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5250-snow Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27ARM: tegra: irq: fix buggy usage of irq_data irq fieldMarc Zyngier1-11/+11
The crazy gic_arch_extn thing that Tegra uses contains multiple references to the irq field in struct irq_data, and uses this to directly poke hardware register. But irq is the *virtual* irq number, something that has nothing to do with the actual HW irq (stored in the hwirq field). And once we put the stacked domain code in action, the whole thing explodes, as these two values are *very* different: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 25801 2075 GIC 29 twd 17: 0 0 GIC 73 timer0 112: 0 0 GPIO 58 c8000600.sdhci cd 123: 0 0 GPIO 69 c8000200.sdhci cd 279: 1126 0 GIC 122 serial 281: 0 0 GIC 70 7000c000.i2c 282: 0 0 GIC 116 7000c400.i2c 283: 0 0 GIC 124 7000c500.i2c 284: 300 0 GIC 85 7000d000.i2c [...] Just replacing all instances of irq with hwirq fixes the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27powerpc: 32 bit getcpu VDSO function uses 64 bit instructionsAnton Blanchard1-2/+2
I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd342a ("powerpc: Add VDSO version of getcpu") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATEGavin Shan1-1/+1
The flag passed to ioda_eeh_phb_reset() should be EEH_RESET_DEACTIVATE, which is translated to OPAL_DEASSERT_RESET or something else by the EEH backend accordingly. The patch replaces OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE for ioda_eeh_phb_reset(). Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/eeh: Fix PE state formatGavin Shan1-1/+1
Obviously I had wrong format given to the PE state output from /sys/bus/pci/devices/xxxx/eeh_pe_state with some typoes, which was introduced by commit 2013add4ce73. The patch fixes it up. Fixes: 2013add4ce73 ("powerpc/eeh: Show hex prefix for PE state sysfs") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/pseries: Fix endiannes issue in RTAS call from xmonLaurent Dufour1-3/+3
On pseries system (LPAR) xmon failed to enter when running in LE mode, system is hunging. Inititating xmon will lead to such an output on the console: SysRq : Entering xmon cpu 0x15: Vector: 0 at [c0000003f39ffb10] pc: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 lr: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 sp: c0000003f39ffc70 msr: 8000000000009033 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash Bad kernel stack pointer fafb4b0 at eca7cc4 cpu 0x15: Vector: 300 (Data Access) at [c000000007f07d40] pc: 000000000eca7cc4 lr: 000000000eca7c44 sp: fafb4b0 msr: 8000000000001000 dar: 10000000 dsisr: 42000000 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash cpu 0x15: Exception 300 (Data Access) in xmon, returning to main loop xmon: WARNING: bad recursive fault on cpu 0x15 The root cause is that xmon is calling RTAS to turn off the surveillance when entering xmon, and RTAS is requiring big endian parameters. This patch is byte swapping the RTAS arguments when running in LE mode. Cc: stable@vger.kernel.org Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Fix the hmi event version check.Mahesh Salgaonkar1-1/+1
The current HMI event structure is an ABI and carries a version field to accommodate future changes without affecting/rearranging current structure members that are valid for previous versions. The current version check "if (hmi_evt->version != OpalHMIEvt_V1)" doesn't accomodate the fact that the version number may change in future. If firmware starts returning an HMI event with version > 1, this check will fail and no HMI information will be printed on older kernels. This patch fixes this issue. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> [mpe: Reword changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-26sparc: Add NOP dma_cache_sync() implementation.David S. Miller1-0/+8
This can be a NOP because we forward dma_{alloc,free}_noncoherent to dma_{alloc,free}_coherent. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()Ard Biesheuvel2-4/+4
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn. The problem being addressed by the patch above was that some ARM code based the memory mapping attributes of a pfn on the return value of kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should be mapped as device memory. However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin, and the existing non-ARM users were already using it in a way which suggests that its name should probably have been 'kvm_is_reserved_pfn' from the beginning, e.g., whether or not to call get_page/put_page on it etc. This means that returning false for the zero page is a mistake and the patch above should be reverted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn()Ard Biesheuvel1-1/+6
Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WIChristoffer Dall1-0/+9
When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland1-1/+2
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-24MIPS: Fix address type used for early memory detection.Steven J. Hill1-1/+1
In 'early_parse_mem' the data type used for the start and size of a memory region specified on the command line is incorrect. If 64-bit addressing is used, the value gets truncated. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8456/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected.Markos Chandras1-2/+12
microMIPS and SmartMIPS can't be used together. This fixes the following build problem: Warning: the 32-bit microMIPS architecture does not support the `smartmips' extension arch/mips/kernel/entry.S:90: Error: unrecognized opcode `mtlhx $24' [...] arch/mips/kernel/entry.S:109: Error: unrecognized opcode `mtlhx $24' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7421/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASEMarkos Chandras1-0/+2
Fixes the following build warnings: arch/mips/kernel/cps-vec.S: Assembler messages: arch/mips/kernel/cps-vec.S:228: Warning: the `mt' extension requires MIPS32 revision 2 or greater [...] arch/mips/kernel/cps-vec.S: Assembler messages: arch/mips/kernel/cps-vec.S:345: Warning: the `mt' extension requires MIPS32 revision 2 or greater Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Netlogic: handle modular AHCI buildsFlorian Fainelli1-2/+4
Commits a951440971d0 ("MIPS: Netlogic: Support for XLP3XX on-chip SATA") and fedfcb1137d2 ("MIPS: Netlogic: XLP9XX on-chip SATA support") added ahci-init and ahci-init-xlp2 as objects to build when CONFIG_SATA_AHCI is enabled. If CONFIG_SATA_AHCI is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! Just check whether CONFIG_SATA_AHCI is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: ganesanr@broadcom.com Cc: jchandra@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/7855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Netlogic: handle modular USB caseFlorian Fainelli1-2/+4
Commit 1004165f346a ("MIPS: Netlogic: USB support for XLP") and then commit 9eac3591e78b ("MIPS: Netlogic: Add support for USB on XLP2xx") added usb-init and usb-init-xlp2 as objects to build when CONFIG_USB is enabled. If CONFIG_USB is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! Just check whether CONFIG_USB is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: ganesanr@broadcom.com Cc: jchandra@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/7854/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Make platform serial setup always built-in.Aaro Koskinen1-1/+2
If SERIAL_8250 is compiled as a module, the platform specific setup for Loongson will be a module too, and it will not work very well. At least on Loongson 3 it will trigger a build failure, since loongson_sysconf is not exported to modules. Fix by making the platform specific serial code always built-in. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/8533/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: fix EVA & non-SMP non-FPU FP context signal handlingPaul Burton1-4/+4
The save_fp_context & restore_fp_context pointers were being assigned to the wrong variables if either: - The kernel is configured for UP & runs on a system without an FPU, since b2ead5282885 "MIPS: Move & rename fpu_emulator_{save,restore}_context". - The kernel is configured for EVA, since ca750649e08c "MIPS: kernel: signal: Prevent save/restore FPU context in user memory". This would lead to FP context being clobbered incorrectly when setting up a sigcontext, then the garbage values being saved uselessly when returning from the signal. Fix by swapping the pointer assignments appropriately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8230/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: cpu-probe: Set the FTLB probability bit on supported coresMarkos Chandras2-1/+34
Make use of the Config6/FLTBP bit to set the probability of a TLBWR instruction to hit the FTLB or the VTLB. A value of 0 (which may be the default value on certain cores, such as proAptiv or P5600) means that a TLBWR instruction will never hit the VTLB which leads to performance limitations since it effectively decreases the number of available TLB slots. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8368/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Fix ".previous without corresponding .section" warningsKevin Cernekee1-3/+0
Commit 078a55fc824c1 ("Delete __cpuinit/__CPUINIT usage from MIPS code") removed our __CPUINIT directives, so now the ".previous" directives are superfluous. Remove them. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8156/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: uaccess.h: Fix strnlen_user comment.Ralf Baechle1-4/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: r4kcache: Add EVA case for protected_writeback_dcache_lineMarkos Chandras1-0/+4
Commit de8974e3f76c0 ("MIPS: asm: r4kcache: Add EVA cache flushing functions") added cache function for EVA using the cachee instruction. However, it didn't add a case for the protected_writeback_dcache_line. mips_dsemul() calls r4k_flush_cache_sigtramp() which in turn uses the protected_writeback_dcache_line() to flush the trampoline code back to memory. This used the wrong "cache" instruction leading to random userland crashes on non-FPU cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Fix info about plat_setup in arch_mem_init commentRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7607/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.cMasanari Iida1-2/+2
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: SEAD3: Fix LED device registration.Ralf Baechle1-6/+2
This isn't a module and shouldn't be one. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8202/
2014-11-24MIPS: Fix a copy & paste error in unistd.hHuacai Chen1-1/+1
Commit 5df4c8dbbc (MIPS: Wire up bpf syscall.) break the N32 build because of a copy & paste error. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8390/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24powerpc/pci: Remove unused force_32bit_msi quirkBenjamin Herrenschmidt2-12/+0
This is now fully replaced with the generic "no_64bit_msi" one that is set by the respective drivers directly. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-11-24powerpc/pseries: Honor the generic "no_64bit_msi" flagBenjamin Herrenschmidt1-1/+1
Instead of the arch specific quirk which we are deprecating Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org>
2014-11-24powerpc/powernv: Honor the generic "no_64bit_msi" flagBenjamin Herrenschmidt2-4/+2
Instead of the arch specific quirk which we are deprecating and that drivers don't understand. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org>
2014-11-23uprobes, x86: Fix _TIF_UPROBE vs _TIF_NOTIFY_RESUMEAndy Lutomirski1-1/+1
x86 call do_notify_resume on paranoid returns if TIF_UPROBE is set but not on non-paranoid returns. I suspect that this is a mistake and that the code only works because int3 is paranoid. Setting _TIF_NOTIFY_RESUME in the uprobe code was probably a workaround for the x86 bug. With that bug fixed, we can remove _TIF_NOTIFY_RESUME from the uprobes code. Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-23Merge branch 'x86-traps' (trap handling from Andy Lutomirski)Linus Torvalds6-84/+82
Merge x86-64 iret fixes from Andy Lutomirski: "This addresses the following issues: - an unrecoverable double-fault triggerable with modify_ldt. - invalid stack usage in espfix64 failed IRET recovery from IST context. - invalid stack usage in non-espfix64 failed IRET recovery from IST context. It also makes a good but IMO scary change: non-espfix64 failed IRET will now report the correct error. Hopefully nothing depended on the old incorrect behavior, but maybe Wine will get confused in some obscure corner case" * emailed patches from Andy Lutomirski <luto@amacapital.net>: x86_64, traps: Rework bad_iret x86_64, traps: Stop using IST for #SS x86_64, traps: Fix the espfix64 #DF fixup and rewrite it in C
2014-11-23x86_64, traps: Rework bad_iretAndy Lutomirski2-26/+48
It's possible for iretq to userspace to fail. This can happen because of a bad CS, SS, or RIP. Historically, we've handled it by fixing up an exception from iretq to land at bad_iret, which pretends that the failed iret frame was really the hardware part of #GP(0) from userspace. To make this work, there's an extra fixup to fudge the gs base into a usable state. This is suboptimal because it loses the original exception. It's also buggy because there's no guarantee that we were on the kernel stack to begin with. For example, if the failing iret happened on return from an NMI, then we'll end up executing general_protection on the NMI stack. This is bad for several reasons, the most immediate of which is that general_protection, as a non-paranoid idtentry, will try to deliver signals and/or schedule from the wrong stack. This patch throws out bad_iret entirely. As a replacement, it augments the existing swapgs fudge into a full-blown iret fixup, mostly written in C. It's should be clearer and more correct. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-23x86_64, traps: Stop using IST for #SSAndy Lutomirski6-26/+8
On a 32-bit kernel, this has no effect, since there are no IST stacks. On a 64-bit kernel, #SS can only happen in user code, on a failed iret to user space, a canonical violation on access via RSP or RBP, or a genuine stack segment violation in 32-bit kernel code. The first two cases don't need IST, and the latter two cases are unlikely fatal bugs, and promoting them to double faults would be fine. This fixes a bug in which the espfix64 code mishandles a stack segment violation. This saves 4k of memory per CPU and a tiny bit of code. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-23x86_64, traps: Fix the espfix64 #DF fixup and rewrite it in CAndy Lutomirski2-32/+26
There's nothing special enough about the espfix64 double fault fixup to justify writing it in assembly. Move it to C. This also fixes a bug: if the double fault came from an IST stack, the old asm code would return to a partially uninitialized stack frame. Fixes: 3891a04aafd668686239349ea58f3314ea2af86b Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-23Merge tag 'armsoc-for-rc6' of ↵Linus Torvalds30-38/+80
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes this week: - A set of clock fixes for shmobile platforms - A fix for tegra that moves serial port labels to be per board. We're choosing to merge this for 3.18 because the labels will start being parsed in 3.19, and without this change serial port numbers that used to be stable since the dawn of time will change numbers. - A few other DT tweaks for Tegra. - A fix for multi_v7_defconfig that makes it stop spewing cpufreq errors on Arndale (Exynos)" * tag 'armsoc-for-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller ARM: tegra: roth: Fix SD card VDD_IO regulator ARM: tegra: Remove eMMC vmmc property for roth/tn7 ARM: dts: tegra: move serial aliases to per-board ARM: tegra: Add serial port labels to Tegra124 DT ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2 ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clock ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree ARM: shmobile: r8a7740 legacy: Correct IIC0 parent clock ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin module ARM: shmobile: r8a7790: Fix SD3CKCR address ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller
2014-11-21Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds10-20/+60
Pull MIPS fixes from Ralf Baechle: "More 3.18 fixes for MIPS: - backtraces were not quite working on on 64-bit kernels - loongson needs a different cache coherency setting - Loongson 3 is a MIPS64 R2 version but due to erratum we treat is an older architecture revision. - fix build errors due to undefined references to __node_distances for certain configurations. - fix instruction decodig in the jump label code. - for certain configurations copy_{from,to}_user destroy the content of $3 so that register needs to be marked as clobbed by the calling code. - Hardware Table Walker fixes. - fill the delay slot of the last instruction of memcpy otherwise whatever ends up there randomly might have undesirable effects. - ensure get_user/__get_user always zero the variable to be read even in case of an error" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: jump_label.c: Handle the microMIPS J instruction encoding MIPS: jump_label.c: Correct the span of the J instruction MIPS: Zero variable read by get_user / __get_user in case of an error. MIPS: lib: memcpy: Restore NOP on delay slot before returning to caller MIPS: tlb-r4k: Add missing HTW stop/start sequences MIPS: asm: uaccess: Add v1 register to clobber list on EVA MIPS: oprofile: Fix backtrace on 64-bit kernel MIPS: Loongson: Set Loongson-3's ISA level to MIPS64R1 MIPS: Loongson: Fix the write-combine CCA value setting MIPS: IP27: Fix __node_distances undefined error MIPS: Loongson3: Fix __node_distances undefined error
2014-11-21Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fix from Michael Ellerman: "One fix from Scott, he says: This patch fixes a crash (introduced in v3.18-rc1) in the FSL MSI driver when threaded IRQs are enabled" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/fsl_msi: mark the msi cascade handler IRQF_NO_THREAD
2014-11-21Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Misc fixes: - gold linker build fix - noxsave command line parsing fix - bugfix for NX setup - microcode resume path bug fix - _TIF_NOHZ versus TIF_NOHZ bugfix as discussed in the mysterious lockup thread" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Fix _TIF_NOHZ handling in syscall_trace_enter_phase1 x86, kaslr: Handle Gold linker for finding bss/brk x86, mm: Set NX across entire PMD at boot x86, microcode: Update BSPs microcode on resume x86: Require exact match for 'noxsave' command line option
2014-11-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-5/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: two Intel uncore driver fixes, a CPU-hotplug fix and a build dependencies fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix boot crash on SBOX PMU on Haswell-EP perf/x86/intel/uncore: Fix IRP uncore register offsets on Haswell EP perf: Fix corruption of sibling list with hotplug perf/x86: Fix embarrasing typo
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 02:38:48 +0000