summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-01-14Merge tag 'armsoc-fixes' of ↵Linus Torvalds13-21/+107
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A bigger batch than I anticipated this week, for two reasons: - Some fallout on Davinci from board file -> DTB conversion, that also includes a few longer-standing fixes (i.e. not recent regressions). - drivers/reset material that has been in linux-next for a while, but didn't get sent to us until now for a variety of reasons (maintainer out sick, holidays, etc). There's a functional dependency in there such that one platform (Altera's SoCFPGA) won't boot without one of the patches; instead of reverting the patch that got merged, I looked at this set and decided it was small enough that I'll pick it up anyway. If you disagree I can revisit with a smaller set. That being said, there's also a handful of the usual stuff: - Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved memory - Fix for PCIe reset on Macchiatobin (Armada 8K development board, what this email is sent from in fact :) - Enable a few new-merged modules for Amlogic in arm64 defconfig - Error path fixes on Integrator - Build fix for Renesas and Qualcomm - Initialization fix for Renesas RZ/G2E .. plus a few more fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: integrator: impd1: use struct_size() in devm_kzalloc() qcom-scm: Include <linux/err.h> header gpio: pl061: handle failed allocations ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries arm64: defconfig: enable modules for amlogic s400 sound card reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ...
2019-01-12Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson1-0/+4
fixes Late reset controller changes for v5.0 This adds missing deassert functionality to the ARC HSDK reset driver, fixes some indentation and grammar issues in the kernel docs, adds a helper to count the number of resets on a device for the non-DT case as well, adds an early reset driver for SoCFPGA and simple reset driver support for Stratix10, and generalizes the uniphier USB3 glue layer reset to also cover AHCI. * tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux: reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding reset: socfpga: add an early reset driver for SoCFPGA reset: fix null pointer dereference on dev by dev_name reset: Add reset_control_get_count() reset: Improve reset controller kernel docs ARC: HSDK: improve reset driver Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson3-3/+20
mvebu fixes for 5.0 They are all device tree fixes which also worth being in stable: - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing this area and crashing while doing it. - Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based) - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based) * tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'integrator-fixes-armsoc' of ↵Olof Johansson1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes Fixes for the Integrator: - Handle failed allocations in the IM/PC bus attachment. - Use struct_size() for allocation. * tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: integrator: impd1: use struct_size() in devm_kzalloc() gpio: pl061: handle failed allocations Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'amlogic-fixes' of ↵Olof Johansson1-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic DT fixes for v5.0-rc - arm64: defconfig: enable modules for amlogic s400 sound card * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: defconfig: enable modules for amlogic s400 sound card Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'remove-dma_zalloc_coherent-5.0' of ↵Linus Torvalds3-7/+8
git://git.infradead.org/users/hch/dma-mapping Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
2019-01-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-4/+6
Pull KVM fixes from Radim Krčmář: "Minor fixes for new code, corner cases, and documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed Documentation/virtual/kvm: Update URL for AMD SEV API specification KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range() kvm: sev: Fail KVM_SEV_INIT if already initialized KVM: validate userspace input in kvm_clear_dirty_log_protect() KVM: x86: Fix bit shifting in update_intel_pt_cfg
2019-01-11Merge tag 'arm64-fixes' of ↵Linus Torvalds7-7/+56
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another handful of arm64 fixes here. Most of the complication comes from improving our kpti code to avoid lengthy pauses (30+ seconds) during boot when we rewrite the page tables. There are also a couple of IORT fixes that came in via Lorenzo. Summary: - Don't error in kexec_file_load if kaslr-seed is missing in device-tree - Fix incorrect argument type passed to iort_match_node_callback() - Fix IORT build failure when CONFIG_IOMMU_API=n - Fix kpti performance regression with new rodata default option - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: return successfully even if kaslr-seed doesn't exist ACPI/IORT: Fix rc_dma_get_range() arm64: kpti: Avoid rewriting early page tables when KASLR is enabled arm64: asm-prototypes: Fix fat-fingered typo in comment ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
2019-01-11x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is ↵Vitaly Kuznetsov1-2/+1
not backed Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when vmptr address is not backed is wrong, we end up advancing RIP twice. Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page") Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11KVM/VMX: Avoid return error when flush tlb successfully in the ↵Lan Tianyu1-1/+1
hv_remote_flush_tlb_with_range() The "ret" is initialized to be ENOTSUPP. The return value of __hv_remote_flush_tlb_with_range() will be Or with "ret" when ept table potiners are mismatched. This will cause return ENOTSUPP even if flush tlb successfully. This patch is to fix the issue and set "ret" to 0. Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.") Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11kvm: sev: Fail KVM_SEV_INIT if already initializedDavid Rientjes1-0/+3
By code inspection, it was found that multiple calls to KVM_SEV_INIT could deplete asid bits and overwrite kvm_sev_info's regions_list. Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this should likely be fixed anyway. This code is serialized by kvm->lock. Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command") Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11KVM: x86: Fix bit shifting in update_intel_pt_cfgGustavo A. R. Silva1-1/+1
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is being left shifted more than 32 bits, the behavior is undefined. Fix this by adding suffix ULL to integer 0xf. Addresses-Coverity-ID: 1476095 ("Bad bit shift operation") Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL to CONFIG_X86_RESCTRL" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE x86/cache: Rename config option to CONFIG_X86_RESCTRL samples/seccomp: Fix 32-bit build
2019-01-11ARM: integrator: impd1: use struct_size() in devm_kzalloc()Gustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-01-11arm64: kexec_file: return successfully even if kaslr-seed doesn't existAKASHI Takahiro1-1/+3
In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10Merge tag 'riscv-for-linus-4.21-rc2-v2' of ↵Linus Torvalds12-41/+117
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This tag contains a handful of updates that slipped through the cracks during the merge window due to the holidays. The fixes are mostly independent, with the exception of one larger audit-related branch. Core RISC-V updates: - The BSS has been moved, which shrinks flat images. - A fix to test-bpf so it compiles on RV64I-based systems. - A fix to respect the kernel commandline when there is no device tree. - A fix to prevent CPUs from trying to put themselves to sleep when bringing down the system. - Support for MODULE_SECTIONS on RV32I-based systems. - [new in v2] The addition of an SBI earlycon driver. This is definately a new feature, but I'd like to include it now because I dropped this patch when submitting the merge window PR that removed our EARLY_PRINTK support. RISC-V audit updates: - The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS As usual, I've tested this by booting a Fedora-based image on a recent QEMU (this time just whatever I had lying around). * tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: tty/serial: Add RISC-V SBI earlycon support riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig riscv: fix trace_sys_exit hook riscv: define CREATE_TRACE_POINTS in ptrace.c riscv: define NR_syscalls in unistd.h riscv: audit: add audit hook in do_syscall_trace_enter/exit() riscv: add audit support RISC-V: Support MODULE_SECTIONS mechanism on RV32 MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree riscv: don't stop itself in smp_send_stop arch: riscv: support kernel command line forcing when no DTB passed tools uapi: fix RISC-V 64-bit support RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-10arm64: kpti: Avoid rewriting early page tables when KASLR is enabledWill Deacon5-5/+52
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") is that the linear map is created with page granularity, which means that transitioning the early page table from global to non-global mappings when enabling kpti can take a significant amount of time during boot. Given that most CPU implementations do not require kpti, this mainly impacts KASLR builds where kpti is forcefully enabled. However, in these situations we know early on that non-global mappings are required and can avoid the use of global mappings from the beginning. The only gotcha is Cavium erratum #27456, which we must detect based on the MIDR value of the boot CPU. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10gpio: pl061: handle failed allocationsNicholas Mc Guire1-1/+5
devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-10csky: fixup compile error with CPU 810.Guo Ren1-1/+1
This bug is from commit f553aa1c13cb ("csky: fixup relocation error with 807 & 860"). I forgot to compile with 810 for that patch. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-10ARM: dts: kirkwood: Fix polarity of GPIO fan linesLinus Walleij1-2/+2
These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: mcbin: fix PCIe reset signalBaruch Siach1-1/+1
The MPP52 signal is on the seconds GPIO instance of CP0, which corresponds to the &cp0_gpio2 handle. Rename the property name to the standard '-gpios' suffix while at it. Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt1-0/+17
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from Linux leads to an immediate crash. So let's make the same memory reservation as the vendor kernel. [gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: asm-prototypes: Fix fat-fingered typo in commentWill Deacon1-1/+1
Some of the right letters, not necessarily in the right order: CONFIG_MODEVERIONS -> CONFIG_MODVERSIONS Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10ARM: dts: da850-lcdk: Correct the sound card namePeter Ujfalusi1-1/+1
To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: dts: da850-lcdk: Correct the audio codec regulatorsPeter Ujfalusi1-0/+36
Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: dts: da850-evm: Correct the sound card namePeter Ujfalusi1-1/+1
To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: dts: da850-evm: Correct the audio codec regulatorsPeter Ujfalusi1-4/+25
Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entriesBartosz Golaszewski1-2/+2
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm644x-evm: fix label names in GPIO lookup entriesBartosz Golaszewski1-2/+2
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm355-evm: fix label names in GPIO lookup entriesBartosz Golaszewski1-2/+2
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: da850-evm: fix label names in GPIO lookup entriesBartosz Golaszewski1-2/+2
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: da830-evm: fix label names in GPIO lookup entriesBartosz Golaszewski1-2/+2
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-09Merge tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds3-41/+65
Pull arch/csky bug fixes from Guo Ren: "Here are some fixup patches for 5.0-rc1: - fix compile error with pte_alloc - fix handle_irq_perbit break irq flow - fix CACHEV1 store instruction fast retire - fix module relocation error with 807 & 860 - add csky kernel features to documentation" * tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux: irqchip/csky: fixup handle_irq_perbit break irq csky: fixup compile error with pte_alloc csky: fixup CACHEV1 store instruction fast retire csky: fixup relocation error with 807 & 860 Documentation/features: Add csky kernel features
2019-01-09x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINEWANG Chao1-1/+1
Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable <stable@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn
2019-01-09x86/cache: Rename config option to CONFIG_X86_RESCTRLBorislav Petkov4-6/+6
CONFIG_RESCTRL is too generic. The final goal is to have a generic option called like this which is selected by the arch-specific ones CONFIG_X86_RESCTRL and CONFIG_ARM64_RESCTRL. The generic one will cover the resctrl filesystem and other generic and shared bits of functionality. Signed-off-by: Borislav Petkov <bp@suse.de> Suggested-by: Ingo Molnar <mingo@kernel.org> Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Babu Moger <babu.moger@amd.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Morse <james.morse@arm.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20190108171401.GC12235@zn.tnic
2019-01-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+6
Merge misc fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, page_alloc: do not wake kswapd with zone lock held hugetlbfs: revert "use i_mmap_rwsem for more pmd sharing synchronization" hugetlbfs: revert "Use i_mmap_rwsem to fix page fault/truncate race" mm: page_mapped: don't assume compound page is huge or THP mm/memory.c: initialise mmu_notifier_range correctly tools/vm/page_owner: use page_owner_sort in the use example kasan: fix krealloc handling for tag-based mode kasan: make tag based mode work with CONFIG_HARDENED_USERCOPY kasan, arm64: use ARCH_SLAB_MINALIGN instead of manual aligning mm, memcg: fix reclaim deadlock with writeback mm/usercopy.c: no check page span for stack objects slab: alien caches must not be initialized if the allocation of the alien cache failed fork, memcg: fix cached_stacks case zram: idle writeback fixes and cleanup
2019-01-08arch/openrisc: Fix issues with access_ok()Stafford Horne1-2/+6
The commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") exposed incorrect implementations of access_ok() macro in several architectures. This change fixes 2 issues found in OpenRISC. OpenRISC was not properly using parenthesis for arguments and also using arguments twice. This patch fixes those 2 issues. I test booted this patch with v5.0-rc1 on qemu and it's working fine. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08kasan, arm64: use ARCH_SLAB_MINALIGN instead of manual aligningAndrey Konovalov1-0/+6
Instead of changing cache->align to be aligned to KASAN_SHADOW_SCALE_SIZE in kasan_cache_create() we can reuse the ARCH_SLAB_MINALIGN macro. Link: http://lkml.kernel.org/r/52ddd881916bcc153a9924c154daacde78522227.1546540962.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08arm64: defconfig: enable modules for amlogic s400 sound cardJerome Brunet1-0/+4
Compile the necessary drivers as modules, including codecs, for the s400 sound card. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-09csky: fixup compile error with pte_allocGuo Ren1-25/+18
Commit: 4cf58924951e remove the address argument of pte_alloc without modify csky related code. linux-5.0-rc1 compile failed with csky. Remove the unnecessary address testing in pte_alloc(). Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08csky: fixup CACHEV1 store instruction fast retireGuo Ren1-0/+25
For I/O access, 810/807 store instruction fast retire will cause wrong primitive. For example: stw (clear interrupt source) stw (unmask interrupt controller) enable interrupt stw is fast retire instruction. When PC is run at enable interrupt stage, the clear interrupt source hasn't finished. It will cause another wrong irq-enter. So use mb() to prevent above. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Lu Baoquan <lu.baoquan@intellif.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain3-7/+8
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08csky: fixup relocation error with 807 & 860Guo Ren1-16/+22
810 doesn't support jsri instruction and csky-as will leave jsri + nop for relocation. Module-probe need replace them with lrw + jsr. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Hui Kai <huikai@acoinfo.com>
2019-01-07Fix a handful of audit-related issuePalmer Dabbelt7-3/+35
This is sort of a mix between a new feature and a bug fix. I've managed to screw up merging this patch set a handful of times but I think it's OK this time around. The main new feature here is audit support for RISC-V, with some fixes to audit-related bugs that cropped up along the way: * The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. * The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. * A fix for trace_sys_exit() so we can enable CONFIG_HAVE_SYSCALL_TRACEPOINTS.
2019-01-07riscv: add HAVE_SYSCALL_TRACEPOINTS to KconfigDavid Abdurachmanov1-0/+1
I looked into Documentation/trace/ftrace-design.rst and, I think, we check all the boxes needed for HAVE_SYSCALL_TRACEPOINTS. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: fix trace_sys_exit hookDavid Abdurachmanov1-1/+1
Fix compilation error. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: define CREATE_TRACE_POINTS in ptrace.cDavid Abdurachmanov1-0/+2
Define CREATE_TRACE_POINTS in order to create functions and structures for the trace events. This is needed if HAVE_SYSCALL_TRACEPOINTS and CONFIG_FTRACE_SYSCALLS are enabled, otherwise we get linking errors: [..] MODPOST vmlinux.o kernel/trace/trace_syscalls.o: In function `.L0 ': trace_syscalls.c:(.text+0x1152): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x126c): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x1328): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x14aa): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x1684): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x17a0): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x185c): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x19de): undefined reference to `__tracepoint_sys_exit' arch/riscv/kernel/ptrace.o: In function `.L0 ': ptrace.c:(.text+0x4dc): undefined reference to `__tracepoint_sys_enter' ptrace.c:(.text+0x632): undefined reference to `__tracepoint_sys_exit' make: *** [Makefile:1036: vmlinux] Error 1 Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: define NR_syscalls in unistd.hDavid Abdurachmanov1-0/+2
This macro is used by kernel/trace/{trace.h,trace_syscalls.c} if we have CONFIG_FTRACE_SYSCALLS enabled. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: audit: add audit hook in do_syscall_trace_enter/exit()David Abdurachmanov1-0/+5
This patch adds auditing functions on entry to and exit from every system call invocation. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: add audit supportDavid Abdurachmanov5-2/+24
On RISC-V (riscv) audit is supported through generic lib/audit.c. The patch adds required arch specific definitions. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>