summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-12-21um: kill unused cpu()Al Viro2-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21uml/i386: missing include in barrier.hAl Viro1-0/+1
we need cpufeatures.h there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: stop polluting the namespace with registers.h contentsAl Viro9-3/+8
Only one extern in there is needed in processor-generic.h, and it's not needed anywhere else. So move it over there and get rid of the include in processor-generic.h, adding includes of registers.h to the few files that need the declarations in it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: move amd64 variant of mmap(2) to arch/x86/um/syscalls_64.cAl Viro5-35/+11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21uml: trim unused junk from arch/x86/um/sys_call_table_*.cAl Viro2-18/+0
a bunch of detritus there - definitions that are never expanded or checked. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: virtio_uml: Fix time-travel external time propagationJohannes Berg1-0/+4
When creating an external event, the current time needs to be propagated to other participants of a simulation. This is done in the places here where we kick a virtq etc. However, it must be done for _all_ external events, and that includes making the initial socket connection and later closing it. Call time_travel_propagate_time() to do this before making or closing the socket connection. Apparently, at least for the initial connection creation, due to the remote side in my use cases using microseconds (rather than nanoseconds), this wasn't a problem yet; only started failing between 5.14-rc1 and 5.15-rc1 (didn't test others much), or possibly depending on the configuration, where more delays happen before the virtio devices are initialized. Fixes: 88ce64249233 ("um: Implement time-travel=ext") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: virt-pci: Fix 32-bit compileJohannes Berg1-4/+4
There were a few 32-bit compile warnings that of course turned into errors with -Werror, fix the 32-bit build. Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: gitignore: Add kernel/capflags.cJohannes Berg1-0/+1
This file is generated, we should ignore it. Fixes: d8fb32f4790f ("um: Add support for host CPU flags and alignment") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: anton.ivanov@cambridgegreys.com Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: registers: Rename function names to avoid conflicts and build problemsRandy Dunlap4-6/+7
The function names init_registers() and restore_registers() are used in several net/ethernet/ and gpu/drm/ drivers for other purposes (not calls to UML functions), so rename them. This fixes multiple build errors. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: Replace if (cond) BUG() with BUG_ON()Changcheng Deng1-2/+1
Fix the following coccinelle reports: ./arch/um/kernel/mem.c:89:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21uml: x86: add FORCE to user_constants.hJohannes Berg1-1/+1
The build system has started warning when filechk is called without FORCE: arch/x86/um/Makefile:44: FORCE prerequisite is missing Add FORCE to make sure the file is checked/rebuilt when necessary (and to quiet up the warning.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: rename set_signals() to um_set_signals()Johannes Berg6-13/+13
Rename set_signals() as there's at least one driver that uses the same name and can now be built on UM due to PCI support, and thus we can get symbol conflicts. Also rename set_signals_trace() to be consistent. Reported-by: kernel test robot <lkp@intel.com> Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: fix ndelay/udelay definesJohannes Berg1-2/+2
Many places in the kernel use 'udelay' as an identifier, and are broken with the current "#define udelay um_udelay". Fix this by adding an argument to the macro, and do the same to 'ndelay' as well, just in case. Fixes: 0bc8fb4dda2b ("um: Implement ndelay/udelay in time-travel mode") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-2/+16
Pull kvm fixes from Paolo Bonzini: "Two small fixes, one of which was being worked around in selftests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Retry page fault if MMU reload is pending and root has no sp KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
2021-12-19Merge tag 'mips-fixes_5.16_3' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: - only enable pci_remap_iospace() for Ralink devices * tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Only define pci_remap_iospace() for Ralink
2021-12-19Merge tag 'powerpc-5.16-4' of ↵Linus Torvalds2-10/+36
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fix a recently introduced oops at boot on 85xx in some configurations. Fix crashes when loading some livepatch modules with STRICT_MODULE_RWX. Thanks to Joe Lawrence, Russell Currey, and Xiaoming Ni" * tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/module_64: Fix livepatching for RO modules powerpc/85xx: Fix oops when CONFIG_FSL_PMC=n
2021-12-19KVM: x86: Retry page fault if MMU reload is pending and root has no spSean Christopherson1-1/+15
Play nice with a NULL shadow page when checking for an obsolete root in the page fault handler by flagging the page fault as stale if there's no shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending. Invalidating memslots, which is the only case where _all_ roots need to be reloaded, requests all vCPUs to reload their MMUs while holding mmu_lock for lock. The "special" roots, e.g. pae_root when KVM uses PAE paging, are not backed by a shadow page. Running with TDP disabled or with nested NPT explodes spectaculary due to dereferencing a NULL shadow page pointer. Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the root. Zapping shadow pages in response to guest activity, e.g. when the guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current vCPU isn't using the affected root. I.e. KVM_REQ_MMU_RELOAD can be seen with a completely valid root shadow page. This is a bit of a moot point as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will be cleaned up in the future. Fixes: a955cad84cda ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211209060552.2956723-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19KVM: x86: Drop guest CPUID check for host initiated writes to ↵Vitaly Kuznetsov1-1/+1
MSR_IA32_PERF_CAPABILITIES The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should not depend on guest visible CPUID entries, even if just to allow creating/restoring guest MSRs and CPUIDs in any sequence. Fixes: 27461da31089 ("KVM: x86/pmu: Support full width counting") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-17Merge tag 'riscv-for-linus-5.16-rc6' of ↵Linus Torvalds2-60/+54
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of DT updates for the SiFive HiFive Unmatched, that fix the regulator handling. These should stop some warning spew. - A pair of fixes for both the SiFive Hifive Unleashed and Unmatched, that correctly hook up the MMC card detect signal. * tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: sifive unmatched: Link the tmp451 with its power supply riscv: dts: sifive unmatched: Fix regulator for board rev3 riscv: dts: sifive unmatched: Expose the PMIC sub-functions riscv: dts: sifive unmatched: Expose the board ID eeprom riscv: dts: sifive unmatched: Name gpio lines riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot
2021-12-16riscv: dts: sifive unmatched: Link the tmp451 with its power supplyVincent Pelletier1-0/+1
Fixes the following probe warning: lm90 0-004c: Looking up vcc-supply from device tree lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed lm90 0-004c: supply vcc not found, using dummy regulator Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Fix regulator for board rev3Vincent Pelletier1-60/+24
The existing values are rejected by the da9063 regulator driver, as they are unachievable with the declared chip setup (non-merged vcore and bmem are unable to provide the declared curent). Fix voltages to match rev3 schematics, which also matches their boot-up configuration within the chip's available precision. Declare bcore1/bcore2 and bmem/bio as merged. Set ldo09 and ldo10 as always-on as their consumers are not declared but exist. Drop ldo current limits as there is no current limit feature for these regulators in the DA9063. Fixes warnings like: DA9063_LDO3: Operation of current configuration missing Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Expose the PMIC sub-functionsVincent Pelletier1-0/+12
These sub-functions are available in the chip revision on this board, so expose them. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Expose the board ID eepromVincent Pelletier1-0/+10
Mark it as read-only as it is factory-programmed with identifying information, and no executable nor configuration: - eth MAC address - board model (PCB version, BoM version) - board serial number Accidental modification would cause misidentification which could brick the board, so marking read-only seem like both a safe and non-constraining choice. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Name gpio linesVincent Pelletier1-0/+4
Follow the pin descriptions given in the version 3 of the board schematics. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16Merge tag 'net-5.16-rc6' of ↵Linus Torvalds1-8/+43
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, wifi, bpf. Relatively large batches of fixes from BPF and the WiFi stack, calm in general networking. Current release - regressions: - dpaa2-eth: fix buffer overrun when reporting ethtool statistics Current release - new code bugs: - bpf: fix incorrect state pruning for <8B spill/fill - iavf: - add missing unlocks in iavf_watchdog_task() - do not override the adapter state in the watchdog task (again) - mlxsw: spectrum_router: consolidate MAC profiles when possible Previous releases - regressions: - mac80211 fixes: - rate control, avoid driver crash for retransmitted frames - regression in SSN handling of addba tx - a memory leak where sta_info is not freed - marking TX-during-stop for TX in in_reconfig, prevent stall - cfg80211: acquire wiphy mutex on regulatory work - wifi drivers: fix build regressions and LED config dependency - virtio_net: fix rx_drops stat for small pkts - dsa: mv88e6xxx: unforce speed & duplex in mac_link_down() Previous releases - always broken: - bpf fixes: - kernel address leakage in atomic fetch - kernel address leakage in atomic cmpxchg's r0 aux reg - signed bounds propagation after mov32 - extable fixup offset - extable address check - mac80211: - fix the size used for building probe request - send ADDBA requests using the tid/queue of the aggregation session - agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid deadlocks - validate extended element ID is present - mptcp: - never allow the PM to close a listener subflow (null-defer) - clear 'kern' flag from fallback sockets, prevent crash - fix deadlock in __mptcp_push_pending() - inet_diag: fix kernel-infoleak for UDP sockets - xsk: do not sleep in poll() when need_wakeup set - smc: avoid very long waits in smc_release() - sch_ets: don't remove idle classes from the round-robin list - netdevsim: - zero-initialize memory for bpf map's value, prevent info leak - don't let user space overwrite read only (max) ethtool parms - ixgbe: set X550 MDIO speed before talking to PHY - stmmac: - fix null-deref in flower deletion w/ VLAN prio Rx steering - dwmac-rk: fix oob read in rk_gmac_setup - ice: time stamping fixes - systemport: add global locking for descriptor life cycle" * tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits) bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 sit: do not call ipip6_dev_free() from sit_init_net() net: systemport: Add global locking for descriptor lifecycle net/smc: Prevent smc_release() from long blocking net: Fix double 0x prefix print in SKB dump virtio_net: fix rx_drops stat for small pkts dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED sfc_ef100: potential dereference of null pointer net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup net: usb: lan78xx: add Allied Telesis AT29M2-AF net/packet: rx_owner_map depends on pg_vec netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc dpaa2-eth: fix ethtool statistics ixgbe: set X550 MDIO speed before talking to PHY ...
2021-12-16Merge tag 'soc-fixes-5.16-3' of ↵Linus Torvalds23-35/+42
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a number of DT fixes, mostly for mistakes found through static checking of the dts files again, as well as a couple of minor changes to address incorrect DT settings. For i.MX, there is yet another series of devitree changes to update RGMII delay settings for ethernet, which is an ongoing problem after some driver changes. For SoC specific device drivers, a number of smaller fixes came up: - i.MX SoC identification was incorrectly registered non-i.MX machines when the driver is built-in - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - a few compile fixes for warnings that get in the way of -Werror - a string overflow in the scpi firmware driver - a boot failure with FORTIFY_SOURCE on Rockchips machines - broken error handling in the AMD TEE driver - a revert for a tegra reset driver commit that broke HDA" * tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) soc/tegra: fuse: Fix bitwise vs. logical OR warning firmware: arm_scpi: Fix string overflow in SCPI genpd driver soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif ARM: socfpga: dts: fix qspi node compatible arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: meson: remove COMMON_CLK arm64: meson: fix dts for JetHub D1 tee: amdtee: fix an IS_ERR() vs NULL bug arm64: dts: apple: change ethernet0 device type to ethernet arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: rockchip: fix poweroff on helios64 arm64: dts: rockchip: fix audio-supply for Rock Pi 4 arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up ...
2021-12-16bpf: Fix extable address check.Alexei Starovoitov1-7/+42
The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL, but it cannot distinguish IS_ERR pointer from valid one. When offset is added to IS_ERR pointer it may become small positive value which is a user address that is not handled by extable logic and has to be checked for at the runtime. Tighten BPF_PROBE_MEM pointer check code to prevent this case. Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16bpf: Fix extable fixup offset.Alexei Starovoitov1-1/+1
The prog - start_of_ldx is the offset before the faulting ldx to the location after it, so this will be used to adjust pt_regs->ip for jumping over it and continuing, and with old temp it would have been fixed up to the wrong offset, causing crash. Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16Merge tag 'arm64-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix missing error code on kexec failure path" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec: Fix missing error code 'ret' warning in load_other_segments()
2021-12-16arm64: kexec: Fix missing error code 'ret' warning in load_other_segments()Lakshmi Ramasubramanian1-0/+1
Since commit ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()"), smatch reports the following warning: arch/arm64/kernel/machine_kexec_file.c:152 load_other_segments() warn: missing error code 'ret' Return code is not set to an error code in load_other_segments() when of_kexec_alloc_and_setup_fdt() call returns a NULL dtb. This results in status success (return code set to 0) being returned from load_other_segments(). Set return code to -EINVAL if of_kexec_alloc_and_setup_fdt() returns NULL dtb. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()") Link: https://lore.kernel.org/r/20211210010121.101823-1-nramas@linux.microsoft.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-12-15Merge tag 's390-5.16-5' of ↵Linus Torvalds5-10/+43
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Add missing handling of R_390_PLT32DBL relocation type in arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3 generate such relocation entries, which our relocation code silently ignores, and which finally will result in an endless loop within the purgatory code in case of kexec. - Add proper handling of errors and print error messages when applying relocations - Fix duplicate tracking of irq nesting level in entry code - Let recordmcount.pl also look for jgnop mnemonic. Starting with binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which breaks mcount location detection. This is only a problem if used with compilers older than gcc 9, since with gcc 9 and newer compilers recordmcount.pl is not used anymore. - Remove preempt_disable()/preempt_enable() pair in kprobe_ftrace_handler() which was done for all architectures except for s390. - Update defconfig * tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: recordmcount.pl: look for jgnop instruction as well as bcrl on s390 s390/entry: fix duplicate tracking of irq nesting level s390: enable switchdev support in defconfig s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add() s390/ftrace: remove preempt_disable()/preempt_enable() pair s390/kexec_file: fix error handling when applying relocations s390/kexec_file: print some more error messages
2021-12-14powerpc/module_64: Fix livepatching for RO modulesRussell Currey1-8/+34
Livepatching a loaded module involves applying relocations through apply_relocate_add(), which attempts to write to read-only memory when CONFIG_STRICT_MODULE_RWX=y. Work around this by performing these writes through the text poke area by using patch_instruction(). R_PPC_REL24 is the only relocation type generated by the kpatch-build userspace tool or klp-convert kernel tree that I observed applying a relocation to a post-init module. A more comprehensive solution is planned, but using patch_instruction() for R_PPC_REL24 on should serve as a sufficient fix. This does have a performance impact, I observed ~15% overhead in module_load() on POWER8 bare metal with checksum verification off. Fixes: c35717c71e98 ("powerpc: Set ARCH_HAS_STRICT_MODULE_RWX") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Russell Currey <ruscur@russell.cc> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> [mpe: Check return codes from patch_instruction()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211214121248.777249-1-mpe@ellerman.id.au
2021-12-13Merge tag 'v5.16-rockchip-socfixes1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Prevent panic with FORTIFY_SOURCE in smp bringup. * tag 'v5.16-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up Link: https://lore.kernel.org/r/1827929.9bfCS3lLB7@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'v5.16-rockchip-dtsfixes1' of ↵Arnd Bergmann5-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes for some board-level issues (regulators, mmc, poweroff, audio) * tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix poweroff on helios64 arm64: dts: rockchip: fix audio-supply for Rock Pi 4 arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge Link: https://lore.kernel.org/r/3072346.MIvVl8DfR5@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'imx-fixes-5.16-2' of ↵Arnd Bergmann2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.16, round 2: - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header - Remove interconnect property from i.MX8MQ LCDIF device to fix the regression that LCDIF driver stops probe, because interconnect provider driver (imx-bus) hasn't been fully working. - Fix soc-imx driver to register SoC device only on i.MX platform. * tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann2-1/+5
arm/fixes Asahi SoC DT/binding fixes for 5.16. Just some minor DT fixups we found after things got merged. * tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux: arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: dts: apple: change ethernet0 device type to ethernet Link: https://lore.kernel.org/r/cc9a1a67-3b2d-ae9f-5733-859111eb78c1@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'socfpga_fix_for_v5.16_part_2' of ↵Arnd Bergmann7-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA fix for v5.16, part 2 - Fix QSPI dts entry to include "jedec,spi-nor" * tag 'socfpga_fix_for_v5.16_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: fix qspi node compatible Link: https://lore.kernel.org/r/20211203181007.3138381-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge branch 'v5.16/fixes' of ↵Arnd Bergmann2-16/+15
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes * 'v5.16/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: meson: remove COMMON_CLK arm64: meson: fix dts for JetHub D1 Link: https://lore.kernel.org/r/ab9f066f-480b-84b2-248e-953f2f2b5f59@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'imx-fixes-5.16' of ↵Arnd Bergmann4-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.16: - A series from Vladimir Oltean to update SJA1105 switch RGMII delay for a few boards, so that kernel doesn't warn on the legacy bindings. - Remove redundant interrupt declaration for gpio-keys on board ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15 and later. * tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Link: https://lore.kernel.org/r/20211126100716.GF4216@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-12s390/entry: fix duplicate tracking of irq nesting levelSven Schnelle1-4/+5
In the current code, when exiting from idle, rcu_irq_enter() is called twice during irq entry: irq_entry_enter()-> rcu_irq_enter() irq_enter() -> rcu_irq_enter() This may lead to wrong results from rcu_is_cpu_rrupt_from_idle() because of a wrong dynticks nmi nesting count. Fix this by only calling irq_enter_rcu(). Cc: <stable@vger.kernel.org> # 5.12+ Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 56e62a737028 ("s390: convert to generic entry") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-12Merge tag 'sched-urgent-2021-12-12' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single fix for the x86 scheduler topology: Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the scheduler towards the ATOM cluster as that has more total capacity. Use selection based on CPU priority instead" * tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched,x86: Don't use cluster topology for x86 hybrid CPUs
2021-12-12Merge tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linuxLinus Torvalds1-2/+2
Pull csky from Guo Ren: "Only one fix for csky: fix fpu config macro" * tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux: csky: fix typo of fpu config macro
2021-12-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-15/+28
Pull kvm fixes from Paolo Bonzini: "More x86 fixes: - Logic bugs in CR0 writes and Hyper-V hypercalls - Don't use Enlightened MSR Bitmap for L3 - Remove user-triggerable WARN Plus a few selftest fixes and a regression test for the user-triggerable WARN" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests: KVM: Add test to verify KVM doesn't explode on "bad" I/O KVM: x86: Don't WARN if userspace mucks with RCX during string I/O exit KVM: X86: Raise #GP when clearing CR0_PG in 64 bit mode selftests: KVM: avoid failures due to reserved HyperTransport region KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req KVM: x86: Wait for IPIs to be delivered when handling Hyper-V TLB flush hypercall KVM: x86: selftests: svm_int_ctl_test: fix intercept calculation KVM: nVMX: Don't use Enlightened MSR Bitmap for L3
2021-12-10Merge tag 'pci-v5.16-fixes-2' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Revert emulation of Marvell Armada A3720 expansion ROM because it doesn't work as expected (Marek Behún) - Assert PERST# in Apple M1 driver to fix initialization when booting from bootloaders using PCIe, such as U-Boot (Marc Zyngier) - Describe PERST# as active low in Apple T8103 DT and update driver to match (Marc Zyngier) * tag 'pci-v5.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: apple: Fix PERST# polarity arm64: dts: apple: t8103: Mark PCIe PERST# polarity active low in DT PCI: apple: Follow the PCIe specifications when resetting the port Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
2021-12-10s390: enable switchdev support in defconfigNiklas Schnelle2-0/+4
The HiperSockets Converged Interface (HSCI) introduced with commit 4e20e73e631a ("s390/qeth: Switchdev event handler") requires CONFIG_SWITCHDEV=y to be usable. Similarly when using Linux controlled SR-IOV capable PF devices with the mlx5_core driver CONFIG_SWITCHDEV=y as well as CONFIG_MLX5_ESWITCH=y are necessary to actually get link on the created VFs. So let's add these to the defconfig to make both types of devices usable. Note also that these options are already enabled in most current distribution kernels. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add()Alexander Egorenkov1-0/+4
Starting with gcc 11.3, the C compiler will generate PLT-relative function calls even if they are local and do not require it. Later on during linking, the linker will replace all PLT-relative calls to local functions with PC-relative ones. Unfortunately, the purgatory code of kexec/kdump is not being linked as a regular executable or shared library would have been, and therefore, all PLT-relative addresses remain in the generated purgatory object code unresolved. This leads to the situation where the purgatory code is being executed during kdump with all PLT-relative addresses unresolved. And this results in endless loops within the purgatory code. Furthermore, the clang C compiler has always behaved like described above and this commit should fix kdump for kernels built with the latter. Because the purgatory code is no regular executable or shared library, contains only calls to local functions and has no PLT, all R_390_PLT32DBL relocation entries can be resolved just like a R_390_PC32DBL one. * https://refspecs.linuxfoundation.org/ELF/zSeries/lzsabi0_zSeries/x1633.html#AEN1699 Relocation entries of purgatory code generated with gcc 11.3 ------------------------------------------------------------ $ readelf -r linux/arch/s390/purgatory/purgatory.o Relocation section '.rela.text' at offset 0x370 contains 5 entries: Offset Info Type Sym. Value Sym. Name + Addend 00000000005c 000c00000013 R_390_PC32DBL 0000000000000000 purgatory_sha_regions + 2 00000000007a 000d00000014 R_390_PLT32DBL 0000000000000000 sha256_update + 2 00000000008c 000e00000014 R_390_PLT32DBL 0000000000000000 sha256_final + 2 000000000092 000800000013 R_390_PC32DBL 0000000000000000 .LC0 + 2 0000000000a0 000f00000014 R_390_PLT32DBL 0000000000000000 memcmp + 2 Relocation entries of purgatory code generated with gcc 11.2 ------------------------------------------------------------ $ readelf -r linux/arch/s390/purgatory/purgatory.o Relocation section '.rela.text' at offset 0x368 contains 5 entries: Offset Info Type Sym. Value Sym. Name + Addend 00000000005c 000c00000013 R_390_PC32DBL 0000000000000000 purgatory_sha_regions + 2 00000000007a 000d00000013 R_390_PC32DBL 0000000000000000 sha256_update + 2 00000000008c 000e00000013 R_390_PC32DBL 0000000000000000 sha256_final + 2 000000000092 000800000013 R_390_PC32DBL 0000000000000000 .LC0 + 2 0000000000a0 000f00000013 R_390_PC32DBL 0000000000000000 memcmp + 2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reported-by: Tao Liu <ltao@redhat.com> Suggested-by: Philipp Rudo <prudo@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211209073817.82196-1-egorenar@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10s390/ftrace: remove preempt_disable()/preempt_enable() pairJerome Marchand1-2/+0
It looks like commit ce5e48036c9e76a2 ("ftrace: disable preemption when recursion locked") missed a spot in kprobe_ftrace_handler() in arch/s390/kernel/ftrace.c. Remove the superfluous preempt_disable/enable_notrace() there too. Fixes: ce5e48036c9e76a2 ("ftrace: disable preemption when recursion locked") Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Link: https://lore.kernel.org/r/20211208151503.1510381-1-jmarchan@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10s390/kexec_file: fix error handling when applying relocationsPhilipp Rudo1-1/+6
arch_kexec_apply_relocations_add currently ignores all errors returned by arch_kexec_do_relocs. This means that every unknown relocation is silently skipped causing unpredictable behavior while the relocated code runs. Fix this by checking for errors and fail kexec_file_load if an unknown relocation type is encountered. The problem was found after gcc changed its behavior and used R_390_PLT32DBL relocations for brasl instruction and relied on ld to resolve the relocations in the final link in case direct calls are possible. As the purgatory code is only linked partially (option -r) ld didn't resolve the relocations leaving them for arch_kexec_do_relocs. But arch_kexec_do_relocs doesn't know how to handle R_390_PLT32DBL relocations so they were silently skipped. This ultimately caused an endless loop in the purgatory as the brasl instructions kept branching to itself. Fixes: 71406883fd35 ("s390/kexec_file: Add kexec_file_load system call") Reported-by: Tao Liu <ltao@redhat.com> Signed-off-by: Philipp Rudo <prudo@redhat.com> Link: https://lore.kernel.org/r/20211208130741.5821-3-prudo@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10s390/kexec_file: print some more error messagesPhilipp Rudo1-3/+24
Be kind and give some more information on what went wrong. Signed-off-by: Philipp Rudo <prudo@redhat.com> Link: https://lore.kernel.org/r/20211208130741.5821-2-prudo@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10KVM: x86: Don't WARN if userspace mucks with RCX during string I/O exitSean Christopherson1-2/+7
Replace a WARN with a comment to call out that userspace can modify RCX during an exit to userspace to handle string I/O. KVM doesn't actually support changing the rep count during an exit, i.e. the scenario can be ignored, but the WARN needs to go as it's trivial to trigger from userspace. Cc: stable@vger.kernel.org Fixes: 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211025201311.1881846-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 16:11:16 +0000