| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Prevent potential NULL pointer dereferences in the HPET and HyperV
code
- Exclude the GART aperture from /proc/kcore to prevent kernel
crashes on access
- Use the correct macros for Cyrix I/O on Geode processors
- Remove yet another kernel address printk leak
- Announce microcode reload completion as requested by quite some
people. Microcode loading has become popular recently.
- Some 'Make Clang' happy fixlets
- A few cleanups for recently added code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/gart: Exclude GART aperture from kcore
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
x86/mm/pti: Make local symbols static
x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
x86/microcode: Announce reload operation's completion
x86/hyperv: Prevent potential NULL pointer dereference
x86/hpet: Prevent potential NULL pointer dereference
x86/lib: Fix indentation issue, remove extra tab
x86/boot: Restrict header scope to make Clang happy
x86/mm: Don't leak kernel addresses
x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Remove secondary GIC support on systems w/o device-tree support
- A set of small fixlets in various irqchip drivers
- static and fall-through annotations
- Kernel doc and typo fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Mark expected switch case fall-through
genirq/devres: Remove excess parameter from kernel doc
irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
irqchip/mbigen: Don't clear eventid when freeing an MSI
irqchip/stm32: Don't set rising configuration registers at init
irqchip/stm32: Don't clear rising/falling config registers at init
dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
irqchip/mmp: Make mmp_irq_domain_ops static
irqchip/brcmstb-l2: Make two init functions static
genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
irqchip/gic: Drop support for secondary GIC in non-DT systems
irqchip/imx-irqsteer: Fix of_property_read_u32() error handling
|
|
On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.
vmcore used to have the same issue, until it was fixed with commit
2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.
Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.
Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a boot failure on 32-bit, introduced during the merge
window.
A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing
the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC
to jump forward and backward.
Our spectre_v2 reporting was a bit confusing due to a bug I
introduced. On some systems it was reporting that the count cache was
disabled and also that we were flushing the count cache on context
switch. Only the former is true, and given that the count cache is
disabled it doesn't make any sense to flush it. No one reported it, so
presumably the presence of any mitigation is all people check for.
Finally a small build fix for zsmalloc on 32-bit.
Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter
Roeck, Michael Neuling"
* tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/security: Fix spectre_v2 reporting
powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations
powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32
powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038
|
|
Merge the forgotten cleanup patch for the new file, so the mess does not
propagate further.
|
|
an error
When building with -Wsometimes-uninitialized, Clang warns:
arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
The default cannot be reached because arch_build_bp_info() initializes
hw->len to one of the specified cases. Nevertheless the warning is valid
and returning -EINVAL makes sure that this cannot be broken by future
modifications.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/392
Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
|
|
With 'make C=2 W=1', sparse and gcc both complain:
CHECK arch/x86/mm/pti.c
arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static?
arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static?
CC arch/x86/mm/pti.o
arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes]
605 | void pti_set_kernel_image_nonglobal(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in
drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated
local (static) symbol.
Make both static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/27680.1552376873@turing-police
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly fixes apart from the kprobe blacklist checking which was
deferred because of conflicting with a fix merged after I pinned the
arm64 for-next/core branch (f2b3d8566d81 "arm64: kprobe: Always
blacklist the KVM world-switch code").
Summary:
- Update the kprobe blacklist checking for arm64. This was supposed
to be queued during the merging window but, due to conflicts, it
was deferred post -rc1
- Extend the Fujitsu erratum 010001 workaround to A64FX v1r0
- Whitelist HiSilicon Taishan v110 CPUs as not susceptible to
Meltdown
- Export save_stack_trace_regs()
- Remove obsolete selection of MULTI_IRQ_HANDLER"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove obsolete selection of MULTI_IRQ_HANDLER
arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs
arm64: Add MIDR encoding for HiSilicon Taishan CPUs
arm64/stacktrace: Export save_stack_trace_regs()
arm64: apply workaround on A64FX v1r0
arm64: kprobes: Use arch_populate_kprobe_blacklist()
arm64: kprobes: Move exception_text check in blacklist
arm64: kprobes: Remove unneeded RODATA check
arm64: kprobes: Move extable address check into arch_prepare_kprobe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates for 5.1 from Marc Zyngier:
- irqsteer error handling fix
- GICv3 range coalescing fix
- stm32 coprocessor coexistence fixes
- mbigen MSI teardown fix
- non-DT secondary GIC infrastructure removed
- various cleanups (brcmstb-l2, mmp)
- new DT bindings (r8a774c0)
|
|
The getCx86_old() and setCx86_old() macros have been replaced with
correctly working getCx86() and setCx86(), so remove these unused macros.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-3-git-send-email-tedheadster@gmail.com
|
|
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com
|
|
By popular demand, issue a single line to dmesg after the reload
operation completes to let the user know that a reload has at least been
attempted.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190313110022.8229-1-bp@alien8.de
|
|
The page allocation in hv_cpu_init() can fail, but the code does not
have a check for that.
Add a check and return -ENOMEM when the allocation fails.
[ tglx: Massaged changelog ]
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Acked-by: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: pakki001@umn.edu
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-hyperv@vger.kernel.org
Link: https://lkml.kernel.org/r/20190314054651.1315-1-kjlu@umn.edu
|
|
hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks
a check.
Add a check to prevent NULL pointer dereference.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kjlu@umn.edu
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Link: https://lkml.kernel.org/r/20190319021958.17275-1-pakki001@umn.edu
|
|
The increment of buff is indented one level too deeply, clean
this up by removing a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20190314230838.18256-1-colin.king@canonical.com
|
|
The inclusion of <linux/kernel.h> was causing issue as the definition of
__arch_hweight64 from arch/x86/include/asm/arch_hweight.h eventually gets
included. The definition is problematic when compiled with -m16 (all code
in arch/x86/boot/ is) as the "D" inline assembly constraint is rejected
by both compilers when passed an argument of type long long (regardless
of signedness, anything smaller is fine).
Because GCC performs inlining before semantic analysis, and
__arch_hweight64 is dead in this translation unit, GCC does not report
any issues at compile time. Clang does the semantic analysis in the
front end, before inlining (run in the middle) can determine the code is
dead. I consider this another case of PR33587, which I think we can do
more work to solve.
It turns out that arch/x86/boot/string.c doesn't actually need
linux/kernel.h, simply linux/limits.h and linux/compiler.h.
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: bp@alien8.de
Cc: niravd@google.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/347
Link: https://lkml.kernel.org/r/20190314221458.83047-1-ndesaulniers@google.com
|
|
When I updated the spectre_v2 reporting to handle software count cache
flush I got the logic wrong when there's no software count cache
enabled at all.
The result is that on systems with the software count cache flush
disabled we print:
Mitigation: Indirect branch cache disabled, Software count cache flush
Which correctly indicates that the count cache is disabled, but
incorrectly says the software count cache flush is enabled.
The root of the problem is that we are trying to handle all
combinations of options. But we know now that we only expect to see
the software count cache flush enabled if the other options are false.
So split the two cases, which simplifies the logic and fixes the bug.
We were also missing a space before "(hardware accelerated)".
The result is we see one of:
Mitigation: Indirect branch serialisation (kernel only)
Mitigation: Indirect branch cache disabled
Mitigation: Software count cache flush
Mitigation: Software count cache flush (hardware accelerated)
Fixes: ee13cb249fab ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- unaligned access support for HS cores
- Removed extra memory barrier around spinlock code
- HSDK platform updates: enable dmac, reset
- some more boot logging updates
- misc minor fixes
* tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arch: arc: Kconfig: pedantic formatting
ARCv2: spinlock: remove the extra smp_mb before lock, after unlock
ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access
ARC: boot log: cut down on verbosity
ARCv2: boot log: refurbish HS core/release identification
arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM
ARC: u-boot args: check that magic number is correct
ARC: perf: bpok condition only exists for ARCompact
ARCv2: Add explcit unaligned access support (and ability to disable too)
ARCv2: lib: introduce memcpy optimized for unaligned access
ARC: [plat-hsdk]: Enable AXI DW DMAC support
ARC: [plat-hsdk]: Add reset controller handle to manage USB reset
ARC: DTB: [scripted] fix node name and address spelling
|
|
The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to
GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a94 ("ARM: Convert
to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already
selected, so just remove the obsolete entry.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is
enabled, and that was the case before commit 4ffe713b7587
("powerpc/mm: Increase the max addressable memory to 2PB").
On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now
define it as 46. That is larger than the real number of physical
address bits, and breaks calculations in zsmalloc:
mm/zsmalloc.c:130:49: warning: right shift count is negative
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
^~
...
mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope
struct size_class *size_class[ZS_SIZE_CLASSES];
^~~~~~~~~~
Fixes: 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A small batch of MIPS fixes for 5.1:
- An interrupt masking fix for Loongson-based Lemote 2F systems
(fixing a regression from v3.19)
- A relocation fix for configurations in which the devicetree is
stored in an ELF section (fixing a regression from v4.7)
- Fix jump labels for MIPSr6 kernels where they previously could
inadvertently place a control transfer instruction in a forbidden
slot & take unexpected exceptions (fixing MIPSr6 support added in
v4.0)
- Extend an existing USB power workaround for the Netgear WNDR3400 to
v2 boards in addition to the v3 ones that already used it
- Remove the custom MIPS32 definition of __kernel_fsid_t to make it
consistent with MIPS64 & every other architecture, in particular
resolving issues for code which tries to print the val field whose
type previously differed (though had identical memory layout)"
* tag 'mips_fixes_5.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Remove custom MIPS32 __kernel_fsid_t type
mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
MIPS: Fix kernel crash for R6 in jump label branch function
MIPS: Ensure ELF appended dtb is relocated
mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.
|
|
HiSilicon Taishan v110 CPUs didn't implement CSV3 field of the
ID_AA64PFR0_EL1 and are not susceptible to Meltdown, so whitelist
the MIDR in kpti_safe_list[] table.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Adding the MIDR encodings for HiSilicon Taishan v110 CPUs,
which is used in Kunpeng ARM64 server SoCs. TSV110 is the
abbreviation of Taishan v110.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ARM64 implements the save_stack_trace_regs function, but it is
unusable for any diagnostic tooling compiled as a kernel module due
the missing EXPORT_SYMBOL_GPL for the function. Export
save_stack_trace_regs() to align with other architectures such as
s390, openrisc, and powerpc. This is similar to the ARM64 export of
save_stack_trace_tsk() added in git commit e27c7fa015d6.
Signed-off-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fujitsu erratum 010001 applies to A64FX v0r0 and v1r0, and we try to
handle either by masking MIDR with MIDR_FUJITSU_ERRATUM_010001_MASK
before comparing it to MIDR_FUJITSU_ERRATUM_010001.
Unfortunately, MIDR_FUJITSU_ERRATUM_010001 is constructed incorrectly
using MIDR_VARIANT(), which is intended to extract the variant field
from MIDR_EL1, rather than generate the field in-place. This results in
MIDR_FUJITSU_ERRATUM_010001 being all-ones, and we only match A64FX
v0r0.
This patch uses MIDR_CPU_VAR_REV() to generate an in-place mask for the
variant field, ensuring the we match both v0r0 and v1r0.
Fixes: 3e32131abc311a5c ("arm64: Add workaround for Fujitsu A64FX erratum 010001")
Reported-by: "Okamoto, Takayuki" <tokamoto@jp.fujitsu.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: fixed the patch author]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Use arch_populate_kprobe_blacklist() instead of
arch_within_kprobe_blacklist() so that we can see the full
blacklisted symbols under the debugfs.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: Add arch_populate_kprobe_blacklist() comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Move exception/irqentry text address check in blacklist,
since those are symbol based rejection.
If we prohibit probing on the symbols in exception_text,
those should be blacklisted.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Remove unneeded RODATA check from arch_prepare_kprobe().
Since check_kprobe_address_safe() already ensured that
the probe address is in kernel text, we don't need to
check whether the address in RODATA or not. That must
be always false.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Move extable address check into arch_prepare_kprobe() from
arch_within_kprobe_blacklist().
The blacklist is exposed via debugfs as a list of symbols.
The extable entries are smaller, so must be filtered out
by arch_prepare_kprobe().
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since commit:
ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
at boot "____ptrval____" is printed instead of actual addresses:
found SMP MP-table at [mem 0x000f5cc0-0x000f5ccf] mapped at [(____ptrval____)]
Instead of changing the print to "%px", and leaking a kernel addresses,
just remove the print completely, like in:
071929dbdd865f77 ("arm64: Stop printing the virtual memory layout").
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Not only the 603 but all 6xx need SPRN_SPRG_PGDIR to be initialised at
startup. This patch move it from __setup_cpu_603() to start_here()
and __secondary_start(), close to the initialisation of SPRN_THREAD.
Previously, virt addr of PGDIR was retrieved from thread struct.
Now that it is the phys addr which is stored in SPRN_SPRG_PGDIR,
hash_page() shall not convert it to phys anymore.
This patch removes the conversion.
Fixes: 93c4a162b014 ("powerpc/6xx: Store PGDIR physical address in a SPRG")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Jakub Drnec reported:
Setting the realtime clock can sometimes make the monotonic clock go
back by over a hundred years. Decreasing the realtime clock across
the y2k38 threshold is one reliable way to reproduce. Allegedly this
can also happen just by running ntpd, I have not managed to
reproduce that other than booting with rtc at >2038 and then running
ntp. When this happens, anything with timers (e.g. openjdk) breaks
rather badly.
And included a test case (slightly edited for brevity):
#define _POSIX_C_SOURCE 199309L
#include <stdio.h>
#include <time.h>
#include <stdlib.h>
#include <unistd.h>
long get_time(void) {
struct timespec tp;
clock_gettime(CLOCK_MONOTONIC, &tp);
return tp.tv_sec + tp.tv_nsec / 1000000000;
}
int main(void) {
long last = get_time();
while(1) {
long now = get_time();
if (now < last) {
printf("clock went backwards by %ld seconds!\n", last - now);
}
last = now;
sleep(1);
}
return 0;
}
Which when run concurrently with:
# date -s 2040-1-1
# date -s 2037-1-1
Will detect the clock going backward.
The root cause is that wtom_clock_sec in struct vdso_data is only a
32-bit signed value, even though we set its value to be equal to
tk->wall_to_monotonic.tv_sec which is 64-bits.
Because the monotonic clock starts at zero when the system boots the
wall_to_montonic.tv_sec offset is negative for current and future
dates. Currently on a freshly booted system the offset will be in the
vicinity of negative 1.5 billion seconds.
However if the wall clock is set past the Y2038 boundary, the offset
from wall to monotonic becomes less than negative 2^31, and no longer
fits in 32-bits. When that value is assigned to wtom_clock_sec it is
truncated and becomes positive, causing the VDSO assembly code to
calculate CLOCK_MONOTONIC incorrectly.
That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which
it is not meant to do. Worse, if the time is then set back before the
Y2038 boundary CLOCK_MONOTONIC will jump backward.
We can fix it simply by storing the full 64-bit offset in the
vdso_data, and using that in the VDSO assembly code. We also shuffle
some of the fields in vdso_data to avoid creating a hole.
The original commit that added the CLOCK_MONOTONIC support to the VDSO
did actually use a 64-bit value for wtom_clock_sec, see commit
a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to
32 bits kernel") (Nov 2005). However just 3 days later it was
converted to 32-bits in commit 0c37ec2aa88b ("[PATCH] powerpc: vdso
fixes (take #2)"), and the bug has existed since then AFAICS.
Fixes: 0c37ec2aa88b ("[PATCH] powerpc: vdso fixes (take #2)")
Cc: stable@vger.kernel.org # v2.6.15+
Link: http://lkml.kernel.org/r/HaC.ZfES.62bwlnvAvMP.1STMMj@seznam.cz
Reported-by: Jakub Drnec <jaydee@email.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- add more Build-Depends to Debian source package
- prefix header search paths with $(srctree)/
- make modpost show verbose section mismatch warnings
- avoid hard-coded CROSS_COMPILE for h8300
- fix regression for Debian make-kpkg command
- add semantic patch to detect missing put_device()
- fix some warnings of 'make deb-pkg'
- optimize NOSTDINC_FLAGS evaluation
- add warnings about redundant generic-y
- clean up Makefiles and scripts
* tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove stale lxdialog/.gitignore
kbuild: force all architectures except um to include mandatory-y
kbuild: warn redundant generic-y
Revert "modsign: Abort modules_install when signing fails"
kbuild: Make NOSTDINC_FLAGS a simply expanded variable
kbuild: deb-pkg: avoid implicit effects
coccinelle: semantic code search for missing put_device()
kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG
kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb
kbuild: deb-pkg: add CONFIG_ prefix to kernel config options
kbuild: add workaround for Debian make-kpkg
kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG}
unicore32: simplify linker script generation for decompressor
h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
kbuild: move archive command to scripts/Makefile.lib
modpost: always show verbose warning for section mismatch
ia64: prefix header search path with $(srctree)/
libfdt: prefix header search paths with $(srctree)/
deb-pkg: generate correct build dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Thomas Gleixner:
"Two cleanup patches removing dead conditionals and unused code"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove unused __constant_c_x_memset() macro and inlines
x86/asm: Remove dead __GNUC__ conditionals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixes for the fallout from the TSX errata workaround:
- Prevent memory corruption caused by a unchecked out of bound array
index.
- Two trivial fixes to address compiler warnings"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Make dev_attr_allow_tsx_force_abort static
perf/x86: Fixup typo in stub functions
perf/x86/intel: Fix memory corruption
|
|
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: kbuild-all@01.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
|
|
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.
um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The generic-y is redundant under the following condition:
- arch has its own implementation
- the same header is added to generated-y
- the same header is added to mandatory-y
If a redundant generic-y is found, the warning like follows is displayed:
scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h
I fixed up arch Kbuild files found by this.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd system call from Christian Brauner:
"This introduces the ability to use file descriptors from /proc/<pid>/
as stable handles on struct pid. Even if a pid is recycled the handle
will not change. For a start these fds can be used to send signals to
the processes they refer to.
With the ability to use /proc/<pid> fds as stable handles on struct
pid we can fix a long-standing issue where after a process has exited
its pid can be reused by another process. If a caller sends a signal
to a reused pid it will end up signaling the wrong process.
With this patchset we enable a variety of use cases. One obvious
example is that we can now safely delegate an important part of
process management - sending signals - to processes other than the
parent of a given process by sending file descriptors around via scm
rights and not fearing that the given process will have been recycled
in the meantime. It also allows for easy testing whether a given
process is still alive or not by sending signal 0 to a pidfd which is
quite handy.
There has been some interest in this feature e.g. from systems
management (systemd, glibc) and container managers. I have requested
and gotten comments from glibc to make sure that this syscall is
suitable for their needs as well. In the future I expect it to take on
most other pid-based signal syscalls. But such features are left for
the future once they are needed.
This has been sitting in linux-next for quite a while and has not
caused any issues. It comes with selftests which verify basic
functionality and also test that a recycled pid cannot be signaled via
a pidfd.
Jon has written about a prior version of this patchset. It should
cover the basic functionality since not a lot has changed since then:
https://lwn.net/Articles/773459/
The commit message for the syscall itself is extensively documenting
the syscall, including it's functionality and extensibility"
* tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add tests for pidfd_send_signal()
signal: add pidfd_send_signal() syscall
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull device-dax updates from Dan Williams:
"New device-dax infrastructure to allow persistent memory and other
"reserved" / performance differentiated memories, to be assigned to
the core-mm as "System RAM".
Some users want to use persistent memory as additional volatile
memory. They are willing to cope with potential performance
differences, for example between DRAM and 3D Xpoint, and want to use
typical Linux memory management apis rather than a userspace memory
allocator layered over an mmap() of a dax file. The administration
model is to decide how much Persistent Memory (pmem) to use as System
RAM, create a device-dax-mode namespace of that size, and then assign
it to the core-mm. The rationale for device-dax is that it is a
generic memory-mapping driver that can be layered over any "special
purpose" memory, not just pmem. On subsequent boots udev rules can be
used to restore the memory assignment.
One implication of using pmem as RAM is that mlock() no longer keeps
data off persistent media. For this reason it is recommended to enable
NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
at rest. We considered making this recommendation an actively enforced
requirement, but in the end decided to leave it as a distribution /
administrator policy to allow for emulation and test environments that
lack security capable NVDIMMs.
Summary:
- Replace the /sys/class/dax device model with /sys/bus/dax, and
include a compat driver so distributions can opt-in to the new ABI.
- Allow for an alternative driver for the device-dax address-range
- Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
- Arrange for the device-dax target-node to be onlined so that the
newly added memory range can be uniquely referenced by numa apis"
NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.
And apparently the PMEM modules can cause that a lot more than regular
RAM. The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.
Quoting Dan from another email:
"The exposure can be reduced in the volatile-RAM case by scanning for
and clearing errors before it is onlined as RAM. The userspace tooling
for that can be in place before v5.1-final. There's also runtime
notifications of errors via acpi_nfit_uc_error_notify() from
background scrubbers on the DIMM devices. With that mechanism the
kernel could proactively clear newly discovered poison in the volatile
case, but that would be additional development more suitable for v5.2.
I understand the concern, and the need to highlight this issue by
tapping the brakes on feature development, but I don't see PMEM as RAM
making the situation worse when the exposure is also there via DAX in
the PMEM case. Volatile-RAM is arguably a safer use case since it's
possible to repair pages where the persistent case needs active
application coordination"
* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: "Hotplug" persistent memory for use like normal RAM
mm/resource: Let walk_system_ram_range() search child resources
mm/memory-hotplug: Allow memory resources to be children
mm/resource: Move HMM pr_debug() deeper into resource code
mm/resource: Return real error codes from walk failures
device-dax: Add a 'modalias' attribute to DAX 'bus' devices
device-dax: Add a 'target_node' attribute
device-dax: Auto-bind device after successful new_id
acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
device-dax: Add /sys/class/dax backwards compatibility
device-dax: Add support for a dax override driver
device-dax: Move resource pinning+mapping into the common driver
device-dax: Introduce bus + driver model
device-dax: Start defining a dax bus model
device-dax: Remove multi-resource infrastructure
device-dax: Kill dax_region base
device-dax: Kill dax_region ida
|
|
Pull more SCSI updates from James Bottomley:
"This is the final round of mostly small fixes and performance
improvements to our initial submit.
The main regression fix is the ia64 simscsi build failure which was
missed in the serial number elimination conversion"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: ia64: simscsi: use request tag instead of serial_number
scsi: aacraid: Fix performance issue on logical drives
scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()
scsi: libiscsi: Hold back_lock when calling iscsi_complete_task
scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink
scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port
scsi: hisi_sas: Set PHY linkrate when disconnected
scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw
scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO
scsi: hisi_sas: Change return variable type in phy_up_v3_hw()
scsi: qla2xxx: check for kstrtol() failure
scsi: lpfc: fix 32-bit format string warning
scsi: lpfc: fix unused variable warning
scsi: target: tcmu: Switch to bitmap_zalloc()
scsi: libiscsi: fall back to sendmsg for slab pages
scsi: qla2xxx: avoid printf format warning
scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset
scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check
scsi: ufs: hisi: fix ufs_hba_variant_ops passing
scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix to prevent runtime allocation of 16GB pages when running in a
VM (as opposed to bare metal), because it doesn't work.
A small fix to our recently added KCOV support to exempt some more
code from being instrumented.
Plus a few minor build fixes, a small dead code removal and a
defconfig update.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy,
Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre"
* tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Include <asm/nmi.h> header file to fix a warning
powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS
powerpc/mm: Disable kcov for SLB routines
powerpc: remove dead code in head_fsl_booke.S
powerpc/configs: Sync skiroot defconfig
powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
"Bugfix for the UML block device driver"
* 'for-linus-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix for a possible OOPS in ubd initialization
um: Remove duplicated include from vector_user.c
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
|
|
Pull ARM updates from Russell King:
- An improvement from Ard Biesheuvel, who noted that the identity map
setup was taking a long time due to flush_cache_louis().
- Update a comment about dma_ops from Wolfram Sang.
- Remove use of "-p" with ld, where this flag has been a no-op since
2004.
- Remove the printing of the virtual memory layout, which is no longer
useful since we hide pointers.
- Correct SCU help text.
- Remove legacy TWD registration method.
- Add pgprot_device() implementation for mapping PCI sysfs resource
files.
- Initialise PFN limits earlier for kmemleak.
- Fix argument count to match macro definition (affects clang builds)
- Use unified assembler language almost everywhere for clang, and other
clang improvements (from Stefan Agner, Nathan Chancellor).
- Support security extension for noMMU and other noMMU cleanups (from
Vladimir Murzin).
- Remove unnecessary SMP bringup code (which was incorrectly copy'n'
pasted from the ARM platform implementations) and remove it from the
arch code to discourge further copys of it appearing.
- Add Cortex A9 erratum preventing kexec working on some SoCs.
- AMBA bus identification updates from Mike Leach.
- More use of raw spinlocks to avoid -RT kernel issues (from Yang Shi
and Sebastian Andrzej Siewior).
- MCPM hyp/svc mode mismatch fixes from Marek Szyprowski.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4
ARM: 8848/1: virt: Align GIC version check with arm64 counterpart
ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used
ARM: 8845/1: use unified assembler in c files
ARM: 8844/1: use unified assembler in assembly files
ARM: 8843/1: use unified assembler in headers
ARM: 8841/1: use unified assembler in macros
ARM: 8840/1: use a raw_spinlock_t in unwind
ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t
ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI support
ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight UCI values.
ARM: 8838/1: drivers: amba: Updates to component identification for driver matching.
ARM: 8833/1: Ensure that NEON code always compiles with Clang
ARM: avoid Cortex-A9 livelock on tight dmb loops
ARM: smp: remove arch-provided "pen_release"
ARM: actions: remove boot_lock and pen_release
ARM: oxnas: remove CPU hotplug implementation
ARM: qcom: remove unnecessary boot_lock
ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE}
ARM: 8831/1: NOMMU: pmsa-v8: remove unneeded semicolon
...
|
|
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Just a couple of small fixes and cleanups:
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)"
* tag 'fbdev-v5.1' of git://github.com/bzolnier/linux:
fbdev: mbx: fix a misspelled variable name
fbdev: omap2: fix warnings in dss core
video: fbdev: Fix potential NULL pointer dereference
fbcon: Silence fbcon logo on 'quiet' boots
printk: Export console_printk
ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity
video: ssd1307fb: Do not hard code active-low reset sequence
dt-bindings: display: ssd1307fb: Remove reset-active-low from examples
fbdev: fbmem: fix memory access if logo is bigger than the screen
video/fbdev: refactor video= cmdline parsing
fbdev: mbx: fix up debugfs file creation
fbdev: omap2: no need to check return value of debugfs_create functions
video: fbdev: geode: remove ifdef OLPC noise
video: offb: annotate implicit fall throughs
omapfb: fix typo
fbdev: Use of_node_name_eq for node name comparisons
fbcon: use kvmalloc() for scrollback buffer
fbdev: chipsfb: remove set but not used variable 'size'
fbdev/via: fix spelling mistake "Expandsion" -> "Expansion"
|
|
Eliminate a gratuitous conflict with 5.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
Third PPC KVM update for 5.1
- Tell userspace about whether a particular hardware workaround for
one of the Spectre vulnerabilities is available, so that userspace
can inform the guest.
|
|
This reverts commit 71883a62fcd6c70639fa12cda733378b4d997409.
The above commit contains an optimization to kvm_zap_gfn_range which
uses gfn-limited TLB flushes, if enabled. If using these limited flushes,
kvm_zap_gfn_range passes lock_flush_tlb=false to slot_handle_level_range
which creates a race when the function unlocks to call cond_resched.
See an example of this race below:
CPU 0 CPU 1 CPU 3
// zap_direct_gfn_range
mmu_lock()
// *ptep == pte_1
*ptep = 0
if (lock_flush_tlb)
flush_tlbs()
mmu_unlock()
// In invalidate range
// MMU notifier
mmu_lock()
if (pte != 0)
*ptep = 0
flush = true
if (flush)
flush_remote_tlbs()
mmu_unlock()
return
// Host MM reallocates
// page previously
// backing guest memory.
// Guest accesses
// invalid page
// through pte_1
// in its TLB!!
Tested: Ran all kvm-unit-tests on a Intel Haswell machine with and
without this patch. The patch introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the request tag for logging instead of the scsi command serial
number.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[jejb: fix commit oneliner]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
