summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-02-09Merge tag 'qcom-dts-for-5.12' of ↵Arnd Bergmann35-144/+1749
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for 5.12 Introduces the Qualcomm SDX55 platform and the platform's MTP device, with support for NAND, SDHCI and USB. USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices Jalapeno boards are added. Samsung Galaxy S5 gains display and GPU support. * tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits) ARM: dts: qcom: msm8974-klte: Mark essential regulators ARM: dts: qcom: msm8974-klte: add support for display ARM: dts: qcom: msm8974-klte: add support for GPU ARM: dts: qcom: msm8974: add gpu support ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node ARM: dts: qcom: replace status value "ok" by "okay" ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3 ARM: dts: qcom: add Alfa Network AP120C-AC ARM: dts: qcom: add 8devices Jalapeno ARM: dts: qcom: ipq4019: add more labels ARM: dts: qcom: ipq4019: add USB devicetree nodes ARM: dts: qcom: add prng definition to ipq806x ARM: dts: qcom: sdx55: Add pshold support ARM: dts: qcom: sdx55: Add Watchdog support dt-bindings: watchdog: Add binding for Qcom SDX55 ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support ARM: dts: qcom: sdx55: Add USB3 and PHY support dt-bindings: usb: qcom,dwc3: Add binding for SDX55 ARM: dts: qcom: msm8974-klte: Fix shdc numbering ... Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09Merge tag 'qcom-arm64-for-5.12' of ↵Arnd Bergmann53-1328/+6468
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.12 This introduces initial support for the new SM8350 platform, aka Snapdragon 888, and the MTP device for this. It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC support to the SM8250 platform and RB5 in particular, as well as improve the definition of CPUs, thermal zones and fixes a few smaller issues. It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone 2 Laser and BQ Aquaris X5, based on the MSM8916 platform. It contains an overhaul of the existing MSM8992 and MSM8994 platform files and introduces RPM power domains and SMP2P nodes. It adds touchscreen, additional regulators, microSD card support and adds the Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common parts of the Lumia 950 and 950XL and extend these with support for sensors, NFC, bluetooth, audio, microSD and Type-C mux pins. It introduces support for the OnePlus6 and 6t, adds the missing higher frequences for the SDM850 laptops, adds CPU cluster idle support on SM8150 and a few tweaks to the SC7180 platform. * tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits) arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels arm64: dts: qcom: msm8996: Add missing device_type under pcie[01] arm64: dts: qcom: sc7180: Add support for gpu fuse arm64: dts: qcom: msm8998: Disable some components by default arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming arm64: dts: qcom: msm8998: Add DMA to I2C hosts arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi arm64: dts: msm8916: Fix reserved and rfsa nodes unit address arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5 arm64: dts: qcom: msm8994-octagon: Add NXP NFC node arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes arm64: dts: qcom: msm8994-octagon: Configure PON keys arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth arm64: dts: qcom: msm8994-octagon: Configure regulators ... Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09Merge tag 'amlogic-dt64-1' of ↵Arnd Bergmann32-478/+780
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.12 - new board: Hardkernel ODROID-HC4 (SoC: SM1) - new board: Beelink GS-King-X (SoC: S922X) - shorten shorten audio card names for alsa compatibility - misc cleanups & fixes * tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add initial device-tree for ODROID-HC4 dt-bindings: arm: amlogic: add ODROID-HC4 bindings arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi arm64: dts: meson: sort Amlogic dtb Makefile dt-bindings: arm: amlogic: sort SM1 bindings arm64: dts: meson: fix broken wifi node for Khadas VIM3L arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi ARM: dts: meson: add the AO ARC remote processor dt-bindings: Amlogic: add the documentation for the SECBUS2 registers dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM arm64: dts: meson: shorten audio card names for alsa compatibility arm64: dts: meson: add initial Beelink GS-King-X device-tree dt-bindings: arm: amlogic: add support for the Beelink GS-King-X arm64: dts: meson: Fix schema warnings for pwm-leds arm64: dts: meson: vim3: whitespace fixups arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 Revert "arm64: dts: amlogic: add missing ethernet reset ID" arm64: dts: amlogic: meson-g12: Set FL-adj property value Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09Merge tag 'amlogic-dt' of ↵Arnd Bergmann7-20/+120
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.12 - add thermal zones with cooling configuration * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: add the thermal-zones with cooling configuration ARM: dts: meson8: add the thermal-zones with cooling configuration ARM: dts: meson: add the ADC thermal sensor to meson.dtsi ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09Merge tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann9-4/+766
arm/dt arm64: dts: ZynqMP DT changes for v5.12 - Wire clock chips present on boards - Enable reset, qspi, nand, watchdog and DP IPs - Enable phy driver for sata and DP - Add iommu description - Add support for zcu104 revC+ boards - Various small changes - Add missing labels - Fix typos in documentation - Add missing boards * tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Wire up the DisplayPort subsystem arm64: dts: zynqmp: Add DisplayPort subsystem arm64: dts: zynqmp: Add DPDMA node dt-bindings: arm: Fix typo in zcu111 board arm64: dts: zynqmp: Add description for zcu104 revC arm64: dts: zynqmp: Add missing iommu IDs arm64: dts: zynqmp: Add missing lpd watchdog node arm64: dts: zynqmp: Wire zynqmp qspi controller arm64: dts: zynqmp: Wire arasan nand controller arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis arm64: dts: zynqmp: Add label for zynqmp_ipi arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 arm64: dts: zynqmp: Enable reset controller driver arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 arm64: dts: zynqmp: Add address-cells property to interrupt controllers Link: https://lore.kernel.org/r/b1a6f89e-f6b4-757b-daf0-d2f1844b833d@xilinx.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09Merge tag 'samsung-dt-5.12' of ↵Arnd Bergmann8-21/+27
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.12 1. Use new compatile to properly configure Exynos5420 USB2 PHY, fixing it suspend/resume cycle. 2. Correct Samsung PMIC interrupt trigger levels on multiple boards. 3. Correct the voltages of Samsung GT-I9100 charger and add top-off charger. * tag 'samsung-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add top-off charging regulator node for I9100 ARM: dts: exynos: Fix charging regulator voltage and current for I9100 ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa ARM: dts: exynos: correct PMIC interrupt trigger level on Spring ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato ARM: dts: exynos: correct PMIC interrupt trigger level on Monk ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5 ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible Link: https://lore.kernel.org/r/20210125191240.11278-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-08arm64: dts: meson: add initial device-tree for ODROID-HC4Christian Hewitt2-0/+97
ODROID-HC4 is a derivative of the C4 with minor differences: - 16MB XT25F128B SPI-NOR flash - 2x SATA ports via ASM1061 PCIe to SATA controller - 7-pin header with SPI and I2C for 1-inch OLED display and RTC - 1x USB 2.0 host port Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210202021021.11068-6-christianshewitt@gmail.com
2021-02-08arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsiChristian Hewitt2-426/+443
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in preparation for adding additional C4 family boards. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210202021021.11068-4-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: sort Amlogic dtb MakefileChristian Hewitt1-1/+1
Sort the Makefile before adding new SM1 devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210202021021.11068-3-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: fix broken wifi node for Khadas VIM3LArtem Lapkin1-4/+3
move &sd_emmc_a ... from /* */ commented area, because cant load wifi fw without sd-uhs-sdr50 option on VIM3L [ 11.686590] brcmfmac: brcmf_chip_cores_check: CPU core not detected [ 11.696382] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! [ 11.706240] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed [ 11.715890] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... [ 13.718424] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported Signed-off-by: Artem Lapkin <art@khadas.com> Fixes: f1bb924e8f5b ("arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210129085041.1408540-1-art@khadas.com
2021-02-03arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsiChristian Hewitt1-0/+14
Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
2021-02-03ARM: dts: meson: add the AO ARC remote processorMartin Blumenstingl3-0/+49
The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On power domain which is typically used for managing system suspend. The memory for this ARC core is taken from the AHB SRAM area. Depending on the actual SoC a different ARC core is used: - Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625) - Meson8 and later: an ARC EM4 (ARCv2 ISA) based core Add the device-tree node for this remote-processor along with the required SRAM sections, clocks and reset-lines. Also use the SoC-specific compatible string to manage any differences (should they exist). On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as some bits need to be programmed there. Add this IO region for those SoCs as well. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210102205904.2691120-6-martin.blumenstingl@googlemail.com
2021-02-03arm64: dts: meson: shorten audio card names for alsa compatibilityChristian Hewitt21-21/+21
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longer than alsa's 15 character name limit [0] to avoid userspace config issues. [0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: add initial Beelink GS-King-X device-treeChristian Hewitt2-0/+134
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - S/PDIF optical output - 2x ESS9018 audio DACs - 4x Ricor RT6862 audio amps - Analogue headphone output - 1x USB 2.0 OTG port - 3x USB 3.0 ports - IR receiver - 1x micro SD card slot (internal) - USB SATA controller with 2x 3.5" drive bays - 1x Power on/off button Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210119145734.12675-3-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: Fix schema warnings for pwm-ledsAlexander Dahl3-8/+8
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. Signed-off-by: Alexander Dahl <post@lespocky.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201228163217.32520-5-post@lespocky.de
2021-02-03arm64: dts: meson: vim3: whitespace fixupsJerome Brunet1-10/+9
Spaces have been used to indent 2 nodes. Replace those with tabs and remove one extra newline Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201207095346.26297-2-jbrunet@baylibre.com
2021-02-02arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levelsAngeloGioacchino Del Regno1-10/+10
The dt-bindings/power/qcom-rpmpd.h header is being included in this DT but the RPMPD OPP table declarations were using open-coded values: use the definitions found in the aforementioned header. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109160759.186990-1-angelogioacchino.delregno@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]Konrad Dybcio1-0/+4
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20201224120025.6282-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: sc7180: Add support for gpu fuseAkhil P Oommen1-0/+22
Add support for gpu fuse to help identify the supported opps. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/1610129731-4875-2-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8998: Disable some components by defaultKonrad Dybcio3-1/+31
Some components (like PCIe) are not used on all devices and with a certain firmware configuration they might end up triggering a force reboot or a Synchronous Abort. This commit brings no functional difference as the nodes are enabled on devices which didn't disable them previously. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109163001.146867-6-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU coresKonrad Dybcio1-0/+8
Add capacity-dmips-mhz to ensure the scheduler can efficiently make use of the big.LITTLE core configuration. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109163001.146867-5-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C namingKonrad Dybcio1-6/+210
The BLSP2-connected interfaces started from 0 which is.. misleading to say the least.. the clock names corresponding to these started from 1, so let's align to that so as to reduce confusion. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109163001.146867-4-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8998: Add DMA to I2C hostsKonrad Dybcio1-0/+37
Add DMA properties to I2C hosts to allow for DMA transfers. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109163001.146867-3-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsiKonrad Dybcio2-110/+104
This is the usual way of handling pin configuration upstream now, so align to it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109163001.146867-2-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: msm8916: Fix reserved and rfsa nodes unit addressVincent Knecht1-2/+2
Fix `reserved` and `rfsa` unit address according to their reg address Fixes: 7258e10e6a0b ("ARM: dts: msm8916: Update reserved-memory") Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20210123104417.518105-1-vincent.knecht@mailoo.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02ARM: dts: qcom: msm8974-klte: Mark essential regulatorsIskren Chernev1-0/+2
s1 and l12 regulators are used for the memory and cache on the Samsung S5 (klte). If they are turned off the phone shuts down. So mark them as always-on to prevent that from happening. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210201105657.1642825-4-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02ARM: dts: qcom: msm8974-klte: add support for displaySamuel Pascua1-0/+95
Add initial support for the display found on the Samsung Galaxy 5 (klte) phone. This is based on work from Jonathan Marek & Brian Masney. Signed-off-by: Samuel Pascua <pascua.samuel.14@gmail.com> [iskren.chernev@gmail.com: add reset gpio, regulators] Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210201105657.1642825-3-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02ARM: dts: qcom: msm8974-klte: add support for GPUSamuel Pascua1-0/+4
Enable adreno dt node. Signed-off-by: Samuel Pascua <pascua.samuel.14@gmail.com> [iskren.chernev@gmail.com: changes after v1] Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210201105657.1642825-2-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02ARM: dts: qcom: msm8974: add gpu supportBrian Masney2-0/+48
Add support for the a3xx GPU. opp_table is chosen to include lower frequencies common to all different msm8974 variants. Signed-off-by: Brian Masney <masneyb@onstation.org> [iskren.chernev@gmail.com: change after v1] Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210201105657.1642825-1-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensorsGustave Monce1-0/+50
Add and configure AD7147 grip sensor and APDS9930 proximity sensor. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-19-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add TAS2553 codecGustave Monce1-0/+20
Lumia 950/XL feature a TAS2553 codec. Configure it using the TAS2552 driver. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-18-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5Gustave Monce1-0/+36
Add AK09912 magnetometer, ZPA2326 barometer and MPU6500 accelerometer nodes. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-17-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add NXP NFC nodeGustave Monce1-0/+16
Octagon devices use PN544 connected over I2C. Configure it. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-16-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodesKonrad Dybcio1-0/+26
FAN53526 and SI470X are both connected over blsp2_i2c5. Configure them. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-15-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Configure PON keysGustave Monce2-1/+17
Both the power key and the vol- key are connected over PON. Configure them. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-14-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGAGustave Monce1-0/+21
Octagon devices have a Lattice iCE40 FPGA connected over SPI. Configure it. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-13-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMCGustave Monce1-0/+21
Lumia 950/XL, like other phones, ship with different storage chips. Some of them are not capable of stable operation at HS400. Disable it. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-12-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pinsGustave Monce1-0/+31
The driver is not available yet, so hardcode the pins. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-11-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetoothGustave Monce1-0/+44
Configure and enable QCA6174 Bluetooth and required pins. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-10-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Configure regulatorsGustave Monce1-0/+314
Configure the regulators to ensure proper voltages across the board. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-9-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Add gpio-keys and Hall sensorGustave Monce1-0/+77
This enables tje hardware keys as well as the Hall sensor. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-8-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994-octagon: Fix up the memory mapGustave Monce1-0/+166
Windows-based devices have a far different memory map than the standard LA one. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-7-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8992/4-lumia*: Create a common DTSGustave Monce5-77/+38
Lumia 950 and 950XL are both based on the Octagon board, sharing the vast majority of components, configuration etc. Commonize it. Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-6-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994Konrad Dybcio4-783/+36
This saves a good thousand lines of code, perhaps even more in the long run. Co-developed-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-5-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994: Sort hwlock properlyKonrad Dybcio1-6/+6
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-4-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994: Fix remaining BLSP errors/mistakesGustave Monce4-42/+149
* Move 35500 clock-frequency to kitakami (turns out it's a Sony specific) * Add missing interfaces * Fix the naming scheme * Fix up pin assignments to make all BLSPs work * Add DMA where previously omitted Signed-off-by: Gustave Monce <gustave.monce@outlook.com> Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-3-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8994: Add SMP2P nodesKonrad Dybcio1-0/+49
They will be required for bringup of remote processors. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013853.55810-2-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8916-longcheer-l8910: Add imu/magnetometerJonathan Albrieux1-0/+37
BQ Aquaris X5 (Longcheer L8910) has: - BMI160 accelerometer and gyroscope sensor - AK09911 magnetometer sensor Add them to the device tree. This patch depends on patch "arm64: dts: qcom: msm8916: Add blsp_i2c3". Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com> Link: https://lore.kernel.org/r/20210125094435.7528-4-jonathan.albrieux@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: msm8916: Add blsp_i2c3Jonathan Albrieux2-0/+31
MSM8916 has another I2C QUP controller that can be enabled on GPIO 10 and 11. Add blsp_i2c3 to msm8916.dtsi and disable it by default. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com> Link: https://lore.kernel.org/r/20210125094435.7528-3-jonathan.albrieux@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: Add device tree for BQ Aquaris X5 (Longcheer L8910)Jonathan Albrieux2-0/+231
BQ Aquaris X5 (Longcheer L8910) is a smartphone using the MSM8916 SoC. Add device tree with initial support for: - SDHCI (internal and external storage) - USB Device Mode - UART - Regulators - WiFi/BT - Volume buttons - Vibrator - Touchkeys backlight This device tree is based on downstream device tree from BQ and from Longcheer L8915 device tree. Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com> Link: https://lore.kernel.org/r/20210125094435.7528-2-jonathan.albrieux@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 12:42:01 +0000