| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
makes the access_ok() check part of the user_access_begin() preceding a
series of 'unsafe' accesses. This has the desirable effect of ensuring
that all 'unsafe' accesses have been range-checked, without having to
pick through all of the callsites to verify whether the appropriate
checking has been made.
However, the consolidated range check does not inhibit speculation, so
it is still up to the caller to ensure that they are not susceptible to
any speculative side-channel attacks for user addresses that ultimately
fail the access_ok() check.
This is an oversight, so use __uaccess_begin_nospec() to ensure that
speculation is inhibited until the access_ok() check has passed.
Reported-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc3.
We've plugged a couple of nasty issues involving KASLR-enabled
kernels, and removed a redundant #define that was introduced as part
of the KHWASAN fixes from akpm at -rc2.
- Fix broken kpti page-table rewrite in bizarre KASLR configuration
- Fix module loading with KASLR
- Remove redundant definition of ARCH_SLAB_MINALIGN"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kasan, arm64: remove redundant ARCH_SLAB_MINALIGN define
arm64: kaslr: ensure randomized quantities are clean to the PoC
arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced on
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Fix IPI handling for Lantiq SoCs, which was broken by changes made
back in v4.12.
- Enable OF/DT serial support in ath79_defconfig to give us working
serial by default.
- Fix 64b builds for the Jazz platform.
- Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers
to perform DMA again following the major DMA mapping changes made in
v4.19.
- Disable MSI on Cavium Octeon systems when the pcie_disable command
line parameter introduced in v3.3 is used, in order to avoid
inadvetently accessing PCIe controller registers despite the command
line.
- Fix a build failure for Cavium Octeon kernels with kexec enabled,
introduced in v4.20.
- Fix a regression in the behaviour of semctl/shmctl/msgctl IPC
syscalls for kernels including n32 support but not o32 support caused
by some cleanup in v3.19.
* tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: fix kexec support
mips: fix n32 compat_ipc_parse_version
Disable MSI also when pcie-octeon.pcie_disable on
MIPS: BCM47XX: Setup struct device for the SoC
MIPS: jazz: fix 64bit build
MIPS: ath79: Enable OF serial ports in the default config
MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ
MIPS: lantiq: Fix IPI interrupt handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fix from Rob Herring:
"A single build fix for powerpc due to device_node.type removal"
* tag 'devicetree-fixes-for-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
powerpc: chrp: Use of_node_is_type to access device_type
|
|
Commit 8ce5f8415753 ("of: Remove struct device_node.type pointer")
removed struct device_node.type pointer, but the conversion to use
of_node_is_type() accessor was missed in chrp_init_IRQ().
Fixes: 8ce5f8415753 ("of: Remove struct device_node.type pointer")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Several fixes for the Xen pvcalls drivers (1 fix for the backend and
8 for the frontend).
- A fix for a rather longstanding bug in the Xen sched_clock()
interface which led to weird time jumps when migrating the system.
- A fix for avoiding accesses to x2apic MSRs in Xen PV guests.
* tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix x86 sched_clock() interface for xen
pvcalls-front: fix potential null dereference
always clear the X2APIC_ENABLE bit for PV guest
pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
xen/pvcalls: remove set but not used variable 'intf'
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
pvcalls-front: don't return error when the ring is full
pvcalls-front: properly allocate sk
pvcalls-front: don't try to free unallocated rings
pvcalls-front: read all data before closing the connection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI initialization ordering issue introduced in the 4.17
time frame and causing functional problems to appear on multiple
systems and fix some fallout of the recent change to enable building
kernels with ACPI support and without PCI.
Specifics:
- Restore the ACPI initialization ordering changed implicitly by the
module-level AML handling rework during the 4.17 development cycle
that caused the EC address space handler based on information from
ECDT to be set up before loading AML definition blocks, making it
effectively not accessible by AML on some systems that don't work
as expected any more (Rafael Wysocki).
- Add direct dependencies on PCI to Kconfig in multiple places for
code that depends on both ACPI and PCI, but the PCI dependency was
implicitly satisfied by the ACPI dependency before, to prevent
invalid configurations from being created, for example by
randconfig (Sinan Kaya)"
* tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Look for ECDT EC after calling acpi_load_tables()
drivers: thermal: int340x_thermal: Make PCI dependency explicit
x86/intel/lpss: Make PCI dependency explicit
platform/x86: apple-gmux: Make PCI dependency explicit
platform/x86: intel_pmc: Make PCI dependency explicit
platform/x86: intel_ips: make PCI dependency explicit
vga-switcheroo: make PCI dependency explicit
ata: pata_acpi: Make PCI dependency explicit
ACPI / LPSS: Make PCI dependency explicit
|
|
- LDFLAGS_vmlinux is cleared by the top Makefile
- 'all: vmlinux' is specified by the top Makefile
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
- scripts/Kbuild.include already defined 'comma'
- The top Makefile has 'PHONY += FORCE'
- include/asm-*/ was moved to arch/*/include/asm/ a decade ago
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Commit f94c8d11699759 ("sched/clock, x86/tsc: Rework the x86 'unstable'
sched_clock() interface") broke Xen guest time handling across
migration:
[ 187.249951] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 187.251137] OOM killer disabled.
[ 187.251137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 187.252299] suspending xenstore...
[ 187.266987] xen:grant_table: Grant tables using version 1 layout
[18446743811.706476] OOM killer enabled.
[18446743811.706478] Restarting tasks ... done.
[18446743811.720505] Setting capacity to 16777216
Fix that by setting xen_sched_clock_offset at resume time to ensure a
monotonic clock value.
[boris: replaced pr_info() with pr_info_once() in xen_callback_vector()
to avoid printing with incorrect timestamp during resume (as we
haven't re-adjusted the clock yet)]
Fixes: f94c8d11699759 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface")
Cc: <stable@vger.kernel.org> # 4.11
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
This is exported by the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
No one uses archmrproper.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Defining ARCH_SLAB_MINALIGN in arch/arm64/include/asm/cache.h when KASAN
is off is not needed, as it is defined in defined in include/linux/slab.h
as ifndef.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
kaslr_early_init() is called with the kernel mapped at its
link time offset, and if it returns with a non-zero offset,
the kernel is unmapped and remapped again at the randomized
offset.
During its execution, kaslr_early_init() also randomizes the
base of the module region and of the linear mapping of DRAM,
and sets two variables accordingly. However, since these
variables are assigned with the caches on, they may get lost
during the cache maintenance that occurs when unmapping and
remapping the kernel, so ensure that these values are cleaned
to the PoC.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Since commit b89d82ef01b3 ("arm64: kpti: Avoid rewriting early page
tables when KASLR is enabled"), a kernel built with CONFIG_RANDOMIZE_BASE
can decide early whether to use non-global mappings by checking the
kaslr_offset().
A kernel built without CONFIG_RANDOMIZE_BASE, instead checks the
cpufeature static-key.
This leaves a gap where CONFIG_RANDOMIZE_BASE was enabled, no
kaslr seed was provided, but kpti was forced on using the cmdline
option.
When the decision is made late, kpti_install_ng_mappings() will re-write
the page tables, but arm64_kernel_use_ng_mappings()'s value does not
change as it only tests the cpufeature static-key if
CONFIG_RANDOMIZE_BASE is disabled.
This function influences PROT_DEFAULT via PTE_MAYBE_NG, and causes
pgattr_change_is_safe() to catch nG->G transitions when the unchanged
PROT_DEFAULT is used as part of PAGE_KERNEL_RO:
[ 1.942255] alternatives: patching kernel code
[ 1.998288] ------------[ cut here ]------------
[ 2.000693] kernel BUG at arch/arm64/mm/mmu.c:165!
[ 2.019215] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 2.020257] Modules linked in:
[ 2.020807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2 #51
[ 2.021917] Hardware name: linux,dummy-virt (DT)
[ 2.022790] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 2.023742] pc : __create_pgd_mapping+0x508/0x6d0
[ 2.024671] lr : __create_pgd_mapping+0x500/0x6d0
[ 2.058059] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
[ 2.059369] Call trace:
[ 2.059845] __create_pgd_mapping+0x508/0x6d0
[ 2.060684] update_mapping_prot+0x48/0xd0
[ 2.061477] mark_linear_text_alias_ro+0xdc/0xe4
[ 2.070502] smp_cpus_done+0x90/0x98
[ 2.071216] smp_init+0x100/0x114
[ 2.071878] kernel_init_freeable+0xd4/0x220
[ 2.072750] kernel_init+0x10/0x100
[ 2.073455] ret_from_fork+0x10/0x18
[ 2.075414] ---[ end trace 3572f3a7782292de ]---
[ 2.076389] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
If arm64_kernel_unmapped_at_el0() is true, arm64_kernel_use_ng_mappings()
should also be true.
Signed-off-by: James Morse <james.morse@arm.com>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
CC: John Garry <john.garry@huawei.com>
CC: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
After commit 5d32a66541c4 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set) dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.
LPSS code relies on PCI infrastructure but this dependency has not
been called out explicitly yet.
Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recently in commit fbf508da7440 ("powerpc: split compat syscall table
out from native table") we changed the layout of the system call
table. Instead of having two entries for each syscall number, one for
the regular entry point and one for the compat entry point, we now
have separate tables for regular and compat entry points.
This inadvertently broke syscall tracing (CONFIG_FTRACE_SYSCALLS),
because our implementation of arch_syscall_addr() knew about the
layout of the table (it did nr * 2).
We can fix it just by dropping our version of arch_syscall_addr() and
using the generic version which does:
return (unsigned long)sys_call_table[nr];
Fixes: fbf508da7440 ("powerpc: split compat syscall table out from native table")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 3be2df00e299 ("powerpc/pseries/npu: Enable platform support")
added a call to pnv_npu2_init() in pseries code. This causes a build
break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV:
powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup':
pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init'
This commit therefore wraps that line in an ifdef, so that pseries
builds without powernv.
Fixes: 3be2df00e299 ("powerpc/pseries/npu: Enable platform support")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Frob change log a bit to blame a different commit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 62cac480f33f ("MIPS: kexec: Make a framework for both jumping and
halting on nonboot CPUs") broke the build of the OCTEON platform as
the relocated_kexec_smp_wait() is now static and not longer exported in
kexec.h.
Replace it by kexec_reboot() like it has been done in other places.
Fixes: 62cac480f33f ("MIPS: kexec: Make a framework for both jumping and halting on nonboot CPUs")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: ralf@linux-mips.org
Cc: stable@vger.kernel.org # 4.20+
|
|
Commit e657fcc clears cpu capability bit instead of using fake cpuid
value, the EXTD should always be off for PV guest without depending
on cpuid value. So remove the cpuid check in xen_read_msr_safe() to
always clear the X2APIC_ENABLE bit.
Signed-off-by: Talons Lee <xin.li@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that
also includes a few longer-standing fixes (i.e. not recent
regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons
(maintainer out sick, holidays, etc). There's a functional
dependency in there such that one platform (Altera's SoCFPGA) won't
boot without one of the patches; instead of reverting the patch
that got merged, I looked at this set and decided it was small
enough that I'll pick it up anyway. If you disagree I can revisit
with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches
PSCI-reserved memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board,
what this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
.. plus a few more fixlets"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
qcom-scm: Include <linux/err.h> header
gpio: pl061: handle failed allocations
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
arm64: defconfig: enable modules for amlogic s400 sound card
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
...
|
|
fixes
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
mvebu fixes for 5.0
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes
Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes
Amlogic DT fixes for v5.0-rc
- arm64: defconfig: enable modules for amlogic s400 sound card
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: defconfig: enable modules for amlogic s400 sound card
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major
architectures like x86 and arm have always zeroed allocations from
dma_alloc_coherent, but a couple other architectures were missing that
zeroing either always or in corner cases.
Then later we grew anothe dma_zalloc_coherent interface to explicitly
request zeroing, but that just added __GFP_ZERO to the allocation
flags, which for some allocators that didn't end up using the page
allocator ended up being a no-op and still not zeroing the
allocations.
So for this merge window I fixed up all remaining architectures to
zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
no-op wrapper around dma_alloc_coherent, which fixes all of the above
issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue"
* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove dma_zalloc_coherent()
cross-tree: phase out dma_zalloc_coherent() on headers
cross-tree: phase out dma_zalloc_coherent()
|
|
Pull KVM fixes from Radim Krčmář:
"Minor fixes for new code, corner cases, and documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
Documentation/virtual/kvm: Update URL for AMD SEV API specification
KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
kvm: sev: Fail KVM_SEV_INIT if already initialized
KVM: validate userspace input in kvm_clear_dirty_log_protect()
KVM: x86: Fix bit shifting in update_intel_pt_cfg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
from improving our kpti code to avoid lengthy pauses (30+ seconds)
during boot when we rewrite the page tables. There are also a couple
of IORT fixes that came in via Lorenzo.
Summary:
- Don't error in kexec_file_load if kaslr-seed is missing in
device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
ACPI/IORT: Fix rc_dma_get_range()
arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
arm64: asm-prototypes: Fix fat-fingered typo in comment
ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
|
|
While reading through the sysvipc implementation, I noticed that the n32
semctl/shmctl/msgctl system calls behave differently based on whether
o32 support is enabled or not: Without o32, the IPC_64 flag passed by
user space is rejected but calls without that flag get IPC_64 behavior.
As far as I can tell, this was inadvertently changed by a cleanup patch
but never noticed by anyone, possibly nobody has tried using sysvipc
on n32 after linux-3.19.
Change it back to the old behavior now.
Fixes: 78aaf956ba3a ("MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # 3.19+
|
|
not backed
Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.
Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
hv_remote_flush_tlb_with_range()
The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.
Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.
Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.
This code is serialized by kvm->lock.
Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.
Fix this by adding suffix ULL to integer 0xf.
Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
to CONFIG_X86_RESCTRL"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
x86/cache: Rename config option to CONFIG_X86_RESCTRL
samples/seccomp: Fix 32-bit build
|
|
My recent commit to fix the printf warnings in ocm.c got the format
specifier wrong, because I copied it from the documentation without
realising the square brackets are not meant as literals.
This results in the address being suffixed with a literal "[p]".
Actually tested this time:
# cat info /sys/kernel/debug/ppc4xx_ocm
PhysAddr : 0x0000000400040000
...
NC.PhysAddr : 0x0000000400040000
...
C.PhysAddr : 0x0000000000000000
Fixes: 52b88fa1e8c7 ("powerpc/4xx/ocm: Fix phys_addr_t printf warnings")
Reported-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With a recent change around IOMMU group, a system with an opencapi
adapter is no longer booting and we get a kernel oops:
BUG: Kernel NULL pointer dereference at 0x00000028
Faulting instruction address: 0xc0000000000aa38c
...
NIP pnv_try_setup_npu_table_group+0x1c/0x1a0
LR pnv_pci_ioda_fixup+0x1f8/0x660
Call Trace:
pnv_try_setup_npu_table_group+0x60/0x
pnv_pci_ioda_fixup+0x20c/0x660
pcibios_resource_survey+0x2c8/0x31c
pcibios_init+0xb0/0xe4
do_one_initcall+0x64/0x264
kernel_init_freeable+0x36c/0x468
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x68
An opencapi device is using a device PE, so the current code breaks
because pe->pbus is not defined.
More generally, there's no need to define an IOMMU group for opencapi,
as the device sends real addresses directly (admittedly, the
virtualization story is yet to be written). So let's fix it by
skipping the IOMMU group setup for opencapi PHBs.
Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit e1c3743e1a20 ("powerpc/tm: Set MSR[TS] just prior to recheckpoint")
moved a code block around and this block uses a 'msr' variable outside of
the CONFIG_PPC_TRANSACTIONAL_MEM, however the 'msr' variable is declared
inside a CONFIG_PPC_TRANSACTIONAL_MEM block, causing a possible error when
CONFIG_PPC_TRANSACTION_MEM is not defined.
error: 'msr' undeclared (first use in this function)
This is not causing a compilation error in the mainline kernel, because
'msr' is being used as an argument of MSR_TM_ACTIVE(), which is defined as
the following when CONFIG_PPC_TRANSACTIONAL_MEM is *not* set:
#define MSR_TM_ACTIVE(x) 0
This patch just fixes this issue avoiding the 'msr' variable usage outside
the CONFIG_PPC_TRANSACTIONAL_MEM block, avoiding trusting in the
MSR_TM_ACTIVE() definition.
Cc: stable@vger.kernel.org
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Fixes: e1c3743e1a20 ("powerpc/tm: Set MSR[TS] just prior to recheckpoint")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer
dereference") moved the loading of r6 earlier in the code. As some
functions are called inbetween, r6 needs to be loaded again with the
address of swapper_pg_dir in order to set PTE pointers for
the Abatron BDI.
Fixes: 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There is a typo so we accidentally allocate enough memory for a pointer
when we wanted to allocate enough for a struct.
Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In kexec_file_load, kaslr-seed property of the current dtb will be deleted
any way before setting a new value if possible. It doesn't matter whether
it exists in the current dtb.
So "ret" should be reset to 0 here.
Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This tag contains a handful of updates that slipped through the cracks
during the merge window due to the holidays. The fixes are mostly
independent, with the exception of one larger audit-related branch.
Core RISC-V updates:
- The BSS has been moved, which shrinks flat images.
- A fix to test-bpf so it compiles on RV64I-based systems.
- A fix to respect the kernel commandline when there is no device
tree.
- A fix to prevent CPUs from trying to put themselves to sleep when
bringing down the system.
- Support for MODULE_SECTIONS on RV32I-based systems.
- [new in v2] The addition of an SBI earlycon driver. This is
definately a new feature, but I'd like to include it now because I
dropped this patch when submitting the merge window PR that removed
our EARLY_PRINTK support.
RISC-V audit updates:
- The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
- The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit}
get defined.
- A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS
As usual, I've tested this by booting a Fedora-based image on a recent
QEMU (this time just whatever I had lying around).
* tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
tty/serial: Add RISC-V SBI earlycon support
riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig
riscv: fix trace_sys_exit hook
riscv: define CREATE_TRACE_POINTS in ptrace.c
riscv: define NR_syscalls in unistd.h
riscv: audit: add audit hook in do_syscall_trace_enter/exit()
riscv: add audit support
RISC-V: Support MODULE_SECTIONS mechanism on RV32
MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer
MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree
riscv: don't stop itself in smp_send_stop
arch: riscv: support kernel command line forcing when no DTB passed
tools uapi: fix RISC-V 64-bit support
RISC-V: Make BSS section as the last section in vmlinux.lds.S
|
|
Octeon has an boot-time option to disable pcie.
Since MSI depends on PCI-E, we should also disable MSI also with
this option is on in order to avoid inadvertently accessing PCIe
registers.
Signed-off-by: YunQiang Su <ysu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: pburton@wavecomp.com
Cc: linux-mips@vger.kernel.org
Cc: aaro.koskinen@iki.fi
Cc: stable@vger.kernel.org # v3.3+
|
|
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions
of VM areas to its linear alias as well") is that the linear map is
created with page granularity, which means that transitioning the early
page table from global to non-global mappings when enabling kpti can
take a significant amount of time during boot.
Given that most CPU implementations do not require kpti, this mainly
impacts KASLR builds where kpti is forcefully enabled. However, in these
situations we know early on that non-global mappings are required and
can avoid the use of global mappings from the beginning. The only gotcha
is Cavium erratum #27456, which we must detect based on the MIDR value
of the boot CPU.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can
fail internal allocation and return NULL. Using any of the assigned
objects without checking is not safe. As this is early in the boot
phase and these allocations really should not fail, any failure here
is probably an indication of a more serious issue so it makes little
sense to try and rollback the previous allocated resources or try to
continue; but rather the probe function is simply exited with -ENOMEM.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This bug is from commit f553aa1c13cb ("csky: fixup relocation error with
807 & 860").
I forgot to compile with 810 for that patch.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.
Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The MPP52 signal is on the seconds GPIO instance of CP0, which
corresponds to the &cp0_gpio2 handle.
Rename the property name to the standard '-gpios' suffix while at it.
Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any
attempt to access it from Linux leads to an immediate crash.
So let's make the same memory reservation as the vendor kernel.
[gregory: added as comment that this region matches the mainline U-boot]
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
