summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08Merge tag 'arm-fixes-5.11-1' of ↵Linus Torvalds7-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a small number of bug fixes that all came in before or during the merge window, most for the omap platform: - One boot regression fix for Nokia N9 (OMAP3). - Two small defconfig changes for omap2, to reflect changes in drivers - Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs. The picoxcell platform will be removed in v5.12, but fixing it first makes it easier to backport to the fix to stable kernels and get a clean build with new dtc versions" * tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: picoxcell: fix missing interrupt-parent properties ARM: dts: ux500/golden: Set display max brightness arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios" ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 ARM: omap2plus_defconfig: enable SPI GPIO ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: dts: OMAP3: disable AES on N950/N9 ARM: omap2plus_defconfig: drop unused POWER_AVS option
2021-01-08Merge tag 'arm64-fixes' of ↵Linus Torvalds10-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Clean-ups following the merging window: remove unused variable, duplicate includes, superfluous barrier, move some inline asm to separate functions. - Disable top-byte-ignore on kernel code addresses with KASAN/MTE enabled (already done when MTE is disabled). - Fix ARCH_LOW_ADDRESS_LIMIT definition with CONFIG_ZONE_DMA disabled. - Compiler/linker flags: link with "-z norelno", discard .eh_frame_hdr instead of --no-eh-frame-hdr. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Move PSTATE.TCO setting to separate functions arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabled arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdr arm64: traps: remove duplicate include statement arm64: link with -z norelro for LLD or aarch64-elf arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA arm64: mte: remove an ISB on kernel exit arm64/smp: Remove unused irq variable in arch_show_interrupts()
2021-01-08Merge branch 'linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a functional bug in arm/chacha-neon as well as a potential buffer overflow in ecdh" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecdh - avoid buffer overflow in ecdh_set_secret() crypto: arm/chacha-neon - add missing counter increment
2021-01-08ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann1-0/+4
dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-07arm64: Move PSTATE.TCO setting to separate functionsCatalin Marinas1-3/+13
For consistency with __uaccess_{disable,enable}_hw_pan(), move the PSTATE.TCO setting into dedicated __uaccess_{disable,enable}_tco() functions. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
2021-01-05Merge tag 'arc-5.11-rc3' of ↵Linus Torvalds2-21/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "Things are quieter on upstreaming front as we are mostly focusing on ARCv3/ARC64 port. This contains just build system updates from Masahiro Yamada" * tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: build: use $(READELF) instead of hard-coded readelf ARC: build: remove unneeded extra-y ARC: build: move symlink creation to arch/arc/Makefile to avoid race ARC: build: add boot_targets to PHONY ARC: build: add uImage.lzma to the top-level target ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
2021-01-05arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabledCatalin Marinas1-1/+1
Commit 49b3cf035edc ("kasan: arm64: set TCR_EL1.TBID1 when enabled") set the TBID1 bit for the KASAN_SW_TAGS configuration, freeing up 8 bits to be used by PAC. With in-kernel MTE now in mainline, also set this bit for the KASAN_HW_TAGS configuration. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Collingbourne <pcc@google.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Andrey Konovalov <andreyknvl@google.com>
2021-01-05arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdrPeter Collingbourne2-6/+2
Currently with ld.lld we emit an empty .eh_frame_hdr section (and a corresponding program header) into the vDSO. With ld.bfd the section is not emitted but the program header is, with p_vaddr set to 0. This can lead to unwinders attempting to interpret the data at whichever location the program header happens to point to as an unwind info header. This happens to be mostly harmless as long as the byte at that location (interpreted as a version number) has a value other than 1, causing both libgcc and LLVM libunwind to ignore the section (in libunwind's case, after printing an error message to stderr), but it could lead to worse problems if the byte happened to be 1 or the program header points to non-readable memory (e.g. if the empty section was placed at a page boundary). Instead of disabling .eh_frame_hdr via --no-eh-frame-hdr (which also has the downside of being unsupported by older versions of GNU binutils), disable it by discarding the section, and stop emitting the program header that points to it. I understand that we intend to emit valid unwind info for the vDSO at some point. Once that happens this patch can be reverted. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://linux-review.googlesource.com/id/If745fd9cadcb31b4010acbf5693727fe111b0863 Link: https://lore.kernel.org/r/20201230221954.2007257-1-pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-05arm64: traps: remove duplicate include statementTian Tao1-1/+0
asm/exception.h is included more than once. Remove the one that isn't necessary. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1609139108-10819-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-05arm64: link with -z norelro for LLD or aarch64-elfNick Desaulniers1-3/+7
With GNU binutils 2.35+, linking with BFD produces warnings for vmlinux: aarch64-linux-gnu-ld: warning: -z norelro ignored BFD can produce this warning when the target emulation mode does not support RELRO program headers, and -z relro or -z norelro is passed. Alan Modra clarifies: The default linker emulation for an aarch64-linux ld.bfd is -maarch64linux, the default for an aarch64-elf linker is -maarch64elf. They are not equivalent. If you choose -maarch64elf you get an emulation that doesn't support -z relro. The ARCH=arm64 kernel prefers -maarch64elf, but may fall back to -maarch64linux based on the toolchain configuration. LLD will always create RELRO program header regardless of target emulation. To avoid the above warning when linking with BFD, pass -z norelro only when linking with LLD or with -maarch64linux. Fixes: 3b92fa7485eb ("arm64: link with -z norelro regardless of CONFIG_RELOCATABLE") Fixes: 3bbd3db86470 ("arm64: relocatable: fix inconsistencies in linker script and options") Cc: <stable@vger.kernel.org> # 5.0.x- Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Cc: Alan Modra <amodra@gmail.com> Cc: Fāng-ruì Sòng <maskray@google.com> Link: https://lore.kernel.org/r/20201218002432.788499-1-ndesaulniers@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMANicolas Saenz Julienne2-2/+3
Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and !CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The limit will default to ~0ULL, effectively spanning the whole memory, which is too high for a configuration that expects low memory to be capped at 4GB. Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour CONFIG_ZONE_DMA32, or span the entire memory when not enabled. Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64: mte: remove an ISB on kernel exitPeter Collingbourne1-1/+1
This ISB is unnecessary because we will soon do an ERET. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I69f1ee6bb09b1372dd744a0e01cedaf090c8d448 Link: https://lore.kernel.org/r/20201203073458.2675400-1-pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64/smp: Remove unused irq variable in arch_show_interrupts()Geert Uytterhoeven1-1/+0
arch/arm64/kernel/smp.c: In function ‘arch_show_interrupts’: arch/arm64/kernel/smp.c:808:16: warning: unused variable ‘irq’ [-Wunused-variable] 808 | unsigned int irq = irq_desc_get_irq(ipi_desc[i]); | ^~~ The removal of the last user forgot to remove the variable. Fixes: 5089bc51f81f ("arm64/smp: Use irq_desc_kstat_cpu() in arch_show_interrupts()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201215103026.2872532-1-geert+renesas@glider.be Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-03crypto: arm/chacha-neon - add missing counter incrementArd Biesheuvel1-0/+1
Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") refactored the chacha block handling in the glue code in a way that may result in the counter increment to be omitted when calling chacha_block_xor_neon() to process a full block. This violates the skcipher API, which requires that the output IV is suitable for handling more input as long as the preceding input has been presented in round multiples of the block size. Also, the same code is exposed via the chacha library interface whose callers may actually rely on this increment to occur even for final blocks that are smaller than the chacha block size. So increment the counter after calling chacha_block_xor_neon(). Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-02Merge tag 's390-5.11-3' of ↵Linus Torvalds4-21/+35
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
2020-12-30s390/Kconfig: sort config S390 select list once againHeiko Carstens1-14/+17
...and add comments at the top and bottom. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30s390: update defconfigsHeiko Carstens3-7/+18
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-29local64.h: make <asm/local64.h> mandatoryRandy Dunlap21-21/+0
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: memmap defer init doesn't work as expectedBaoquan He1-2/+2
VMware observed a performance regression during memmap init on their platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") causing it. Before the commit: [0.033176] Normal zone: 1445888 pages used for memmap [0.033176] Normal zone: 89391104 pages, LIFO batch:63 [0.035851] ACPI: PM-Timer IO Port: 0x448 With commit [0.026874] Normal zone: 1445888 pages used for memmap [0.026875] Normal zone: 89391104 pages, LIFO batch:63 [2.028450] ACPI: PM-Timer IO Port: 0x448 The root cause is the current memmap defer init doesn't work as expected. Before, memmap_init_zone() was used to do memmap init of one whole zone, to initialize all low zones of one numa node, but defer memmap init of the last zone in that numa node. However, since commit 73a6e474cb376, function memmap_init() is adapted to iterater over memblock regions inside one zone, then call memmap_init_zone() to do memmap init for each region. E.g, on VMware's system, the memory layout is as below, there are two memory regions in node 2. The current code will mistakenly initialize the whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to iniatialize only one memmory section on the 2nd region [mem 0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's only one memory section's memmap initialized. That's why more time is costed at the time. [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff] [ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff] [ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff] [ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff] Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass down the real zone end pfn so that defer_init() can use it to judge whether defer need be taken in zone wide. Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Rahul Gopakumar <gopakumarr@vmware.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-24Merge tag 'riscv-for-linus-5.11-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt "Avoid trying to initialize memory regions outside the usable range" * tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix usage of memblock_enforce_memory_limit
2020-12-24Merge tag 'powerpc-5.11-2' of ↵Linus Torvalds7-15/+29
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Four commits fixing various things in the new C VDSO code - One fix for a 32-bit VMAP stack bug - Two minor build fixes Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer. * tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO powerpc/vdso: Block R_PPC_REL24 relocations powerpc/smp: Add __init to init_big_cores() powerpc/time: Force inlining of get_tb() powerpc/boot: Fix build of dts/fsl
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds6-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds9-152/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-22Merge tag 'kbuild-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use /usr/bin/env for shebang lines in scripts - Remove useless -Wnested-externs warning flag - Update documents - Refactor log handling in modpost - Stop building modules without MODULE_LICENSE() tag - Make the insane combination of 'static' and EXPORT_SYMBOL an error - Improve genksyms to handle _Static_assert() * tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/kbuild: Document platform dependency practises Documentation/kbuild: Document COMPILE_TEST dependencies genksyms: Ignore module scoped _Static_assert() modpost: turn static exports into error modpost: turn section mismatches to error from fatal() modpost: change license incompatibility to error() from fatal() modpost: turn missing MODULE_LICENSE() into error modpost: refactor error handling and clarify error/fatal difference modpost: rename merror() to error() kbuild: don't hardcode depmod path kbuild: doc: document subdir-y syntax kbuild: doc: clarify the difference between extra-y and always-y kbuild: doc: split if_changed explanation to a separate section kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections kbuild: doc: fix 'List directories to visit when descending' section kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/ kbuild: doc: update the description about kbuild Makefiles Makefile.extrawarn: remove -Wnested-externs warning tweewide: Fix most Shebang lines
2020-12-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds36-51/+466
Merge KASAN updates from Andrew Morton. This adds a new hardware tag-based mode to KASAN. The new mode is similar to the existing software tag-based KASAN, but relies on arm64 Memory Tagging Extension (MTE) to perform memory and pointer tagging (instead of shadow memory and compiler instrumentation). By Andrey Konovalov and Vincenzo Frascino. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits) kasan: update documentation kasan, mm: allow cache merging with no metadata kasan: sanitize objects when metadata doesn't fit kasan: clarify comment in __kasan_kfree_large kasan: simplify assign_tag and set_tag calls kasan: don't round_up too much kasan, mm: rename kasan_poison_kfree kasan, mm: check kasan_enabled in annotations kasan: add and integrate kasan boot parameters kasan: inline (un)poison_range and check_invalid_free kasan: open-code kasan_unpoison_slab kasan: inline random_tag for HW_TAGS kasan: inline kasan_reset_tag for tag-based modes kasan: remove __kasan_unpoison_stack kasan: allow VMAP_STACK for HW_TAGS mode kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK kasan: introduce set_alloc_info kasan: rename get_alloc/free_info kasan: simplify quarantine_put call site kselftest/arm64: check GCR_EL1 after context switch ...
2020-12-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linuxLinus Torvalds50-473/+1256
Pull ARM updates from Russell King: - Rework phys/virt translation - Add KASan support - Move DT out of linear map region - Use more PC-relative addressing in assembly - Remove FP emulation handling while in kernel mode - Link with '-z norelro' - remove old check for GCC <= 4.2 in ARM unwinder code - disable big endian if using clang's linker * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits) ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section ARM: 9038/1: Link with '-z norelro' ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro ARM: 9036/1: uncompress: Fix dbgadtb size parameter name ARM: 9035/1: uncompress: Add be32tocpu macro ARM: 9033/1: arm/smp: Drop the macro S(x,s) ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol ARM: 9044/1: vfp: use undef hook for VFP support detection ARM: 9034/1: __div64_32(): straighten up inline asm constraints ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler ARM: 9028/1: disable KASAN in call stack capturing routines ARM: 9026/1: unwind: remove old check for GCC <= 4.2 ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD ARM: 9024/1: Drop useless cast of "u64" to "long long" ARM: 9023/1: Spelling s/mmeory/memory/ ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak ARM: kvm: replace open coded VA->PA calculations with adr_l call ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET ...
2020-12-22Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-12/+111
Pull dma-mapping updates from Christoph Hellwig: - support for a partial IOMMU bypass (Alexey Kardashevskiy) - add a DMA API benchmark (Barry Song) - misc fixes (Tiezhu Yang, tangjianqiang) * tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping: selftests/dma: add test application for DMA_MAP_BENCHMARK dma-mapping: add benchmark support for streaming DMA APIs dma-contiguous: fix a typo error in a comment dma-pool: no need to check return value of debugfs_create functions powerpc/dma: Fallback to dma_ops when persistent memory present dma-mapping: Allow mixing bypass and mapped DMA operation
2020-12-22x86/split-lock: Avoid returning with interrupts enabledAndi Kleen1-1/+2
When a split lock is detected always make sure to disable interrupts before returning from the trap handler. The kernel exit code assumes that all exits run with interrupts disabled, otherwise the SWAPGS sequence can race against interrupts and cause recursing page faults and later panics. The problem will only happen on CPUs with split lock disable functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville. Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Fixes: bce9b042ec73 ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+ Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: allow VMAP_STACK for HW_TAGS modeAndrey Konovalov1-4/+4
Even though hardware tag-based mode currently doesn't support checking vmalloc allocations, it doesn't use shadow memory and works with VMAP_STACK as is. Change VMAP_STACK definition accordingly. Link: https://lkml.kernel.org/r/ecdb2a1658ebd88eb276dee2493518ac0e82de41.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I3552cbc12321dec82cd7372676e9372a2eb452ac Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: unpoison stack only with CONFIG_KASAN_STACKAndrey Konovalov2-2/+2
There's a config option CONFIG_KASAN_STACK that has to be enabled for KASAN to use stack instrumentation and perform validity checks for stack variables. There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled. Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is enabled. Note, that CONFIG_KASAN_STACK is an option that is currently always defined when CONFIG_KASAN is enabled, and therefore has to be tested with #if instead of #ifdef. Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: enable CONFIG_KASAN_HW_TAGSAndrey Konovalov1-0/+1
Hardware tag-based KASAN is now ready, enable the configuration option. Link: https://lkml.kernel.org/r/a6fa50d3bb6b318e05c6389a44095be96442b8b0.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: print report from tag fault handlerAndrey Konovalov1-0/+14
Add error reporting for hardware tag-based KASAN. When CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag fault handler. SAS bits aren't set in ESR for all faults reported in EL1, so it's impossible to find out the size of the access the caused the fault. Adapt KASAN reporting code to handle this case. Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: implement HW_TAGS runtimeAndrey Konovalov3-2/+7
Provide implementation of KASAN functions required for the hardware tag-based mode. Those include core functions for memory and pointer tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt common KASAN code to support the new mode. Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: expand CONFIG_KASAN checksAndrey Konovalov10-14/+18
Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes (either related to shadow memory or compiler instrumentation). Expand those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS. Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, x86, s390: update undef CONFIG_KASANAndrey Konovalov2-0/+2
With the intoduction of hardware tag-based KASAN some kernel checks of this kind: ifdef CONFIG_KASAN will be updated to: if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) x86 and s390 use a trick to #undef CONFIG_KASAN for some of the code that isn't linked with KASAN runtime and shouldn't have any KASAN annotations. Also #undef CONFIG_KASAN_GENERIC with CONFIG_KASAN. Link: https://lkml.kernel.org/r/9d84bfaaf8fabe0fc89f913c9e420a30bd31a260.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: add arch layer for memory tagging helpersAndrey Konovalov1-0/+9
This patch add a set of arch_*() memory tagging helpers currently only defined for arm64 when hardware tag-based KASAN is enabled. These helpers will be used by KASAN runtime to implement the hardware tag-based mode. The arch-level indirection level is introduced to simplify adding hardware tag-based KASAN support for other architectures in the future by defining the appropriate arch_*() macros. Link: https://lkml.kernel.org/r/fc9e5bb71201c03131a2fc00a74125723568dda9.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: align allocations for HW_TAGSAndrey Konovalov1-0/+3
Hardware tag-based KASAN uses the memory tagging approach, which requires all allocations to be aligned to the memory granule size. Align the allocations to MTE_GRANULE_SIZE via ARCH_SLAB_MINALIGN when CONFIG_KASAN_HW_TAGS is enabled. Link: https://lkml.kernel.org/r/fe64131606b1c2aabfd34ae99554c0d9df18eb19.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: switch GCR_EL1 in kernel entry and exitVincenzo Frascino6-4/+79
When MTE is present, the GCR_EL1 register contains the tags mask that allows to exclude tags from the random generation via the IRG instruction. With the introduction of the new Tag-Based KASAN API that provides a mechanism to reserve tags for special reasons, the MTE implementation has to make sure that the GCR_EL1 setting for the kernel does not affect the userspace processes and viceversa. Save and restore the kernel/user mask in GCR_EL1 in kernel entry and exit. Link: https://lkml.kernel.org/r/578b03294708cc7258fad0dc9c2a2e809e5a8214.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: convert gcr_user into an exclude maskVincenzo Frascino2-15/+16
The gcr_user mask is a per thread mask that represents the tags that are excluded from random generation when the Memory Tagging Extension is present and an 'irg' instruction is invoked. gcr_user affects the behavior on EL0 only. Currently that mask is an include mask and it is controlled by the user via prctl() while GCR_EL1 accepts an exclude mask. Convert the include mask into an exclude one to make it easier the register setting. Note: This change will affect gcr_kernel (for EL1) introduced with a future patch. Link: https://lkml.kernel.org/r/946dd31be833b660334c4f93410acf6d6c4cf3c4.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: allow enabling in-kernel MTEVincenzo Frascino3-3/+33
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) feature and requires it to be enabled. MTE supports This patch adds a new mte_enable_kernel() helper, that enables MTE in Synchronous mode in EL1 and is intended to be called from KASAN runtime during initialization. The Tag Checking operation causes a synchronous data abort as a consequence of a tag check fault when MTE is configured in synchronous mode. As part of this change enable match-all tag for EL1 to allow the kernel to access user pages without faulting. This is required because the kernel does not have knowledge of the tags set by the user in a page. Note: For MTE, the TCF bit field in SCTLR_EL1 affects only EL1 in a similar way as TCF0 affects EL0. MTE that is built on top of the Top Byte Ignore (TBI) feature hence we enable it as part of this patch as well. Link: https://lkml.kernel.org/r/7352b0a0899af65c2785416c8ca6bf3845b66fa1.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: add in-kernel tag fault handlerVincenzo Frascino3-0/+70
Add the implementation of the in-kernel fault handler. When a tag fault happens on a kernel address: * MTE is disabled on the current CPU, * the execution continues. When a tag fault happens on a user address: * the kernel executes do_bad_area() and panics. The tag fault handler for kernel addresses is currently empty and will be filled in by a future commit. Link: https://lkml.kernel.org/r/20201203102628.GB2224@gaia Link: https://lkml.kernel.org/r/ad31529b073e22840b7a2246172c2b67747ed7c4.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: ensure CONFIG_ARM64_PAN is enabled with MTE] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: reset the page tag in page->flagsVincenzo Frascino4-0/+32
The hardware tag-based KASAN for compatibility with the other modes stores the tag associated to a page in page->flags. Due to this the kernel faults on access when it allocates a page with an initial tag and the user changes the tags. Reset the tag associated by the kernel to a page in all the meaningful places to prevent kernel faults on access. Note: An alternative to this approach could be to modify page_to_virt(). This though could end up being racy, in fact if a CPU checks the PG_mte_tagged bit and decides that the page is not tagged but another CPU maps the same with PROT_MTE and becomes tagged the subsequent kernel access would fail. Link: https://lkml.kernel.org/r/9073d4e973747a6f78d5bdd7ebe17f290d087096.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: add in-kernel MTE helpersVincenzo Frascino6-6/+150
Provide helper functions to manipulate allocation and pointer tags for kernel addresses. Low-level helper functions (mte_assign_*, written in assembly) operate tag values from the [0x0, 0xF] range. High-level helper functions (mte_get/set_*) use the [0xF0, 0xFF] range to preserve compatibility with normal kernel pointers that have 0xFF in their top byte. MTE_GRANULE_SIZE and related definitions are moved to mte-def.h header that doesn't have any dependencies and is safe to include into any low-level header. Link: https://lkml.kernel.org/r/c31bf759b4411b2d98cdd801eb928e241584fd1f.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: enable armv8.5-a asm-arch optionVincenzo Frascino2-0/+9
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) which is an armv8.5-a architecture extension. Enable the correct asm option when the compiler supports it in order to allow the usage of ALTERNATIVE()s with MTE instructions. Link: https://lkml.kernel.org/r/d03d1157124ea3532eaeb77507988733f5734986.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: rename kasan_init_tags and mark as __initAndrey Konovalov2-2/+2
Rename kasan_init_tags() to kasan_init_sw_tags() as the upcoming hardware tag-based KASAN mode will have its own initialization routine. Also similarly to kasan_init() mark kasan_init_tags() as __init. Link: https://lkml.kernel.org/r/71e52af72a09f4b50c8042f16101c60e50649fbb.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: move initialization messageAndrey Konovalov2-14/+8
Software tag-based KASAN mode is fully initialized with kasan_init_tags(), while the generic mode only requires kasan_init(). Move the initialization message for tag-based mode into kasan_init_tags(). Also fix pr_fmt() usage for KASAN code: generic.c doesn't need it as it doesn't use any printing functions; tag-based mode should use "kasan:" instead of KBUILD_MODNAME (which stands for file name). Link: https://lkml.kernel.org/r/29a30ea4e1750450dd1f693d25b7b6cb05913ecf.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: only use kasan_depth for software modesAndrey Konovalov1-3/+8
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't use kasan_depth. Only define and use it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: only init shadow for software modesAndrey Konovalov2-3/+20
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory. Only initialize it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/d1742eea2cd728d150d49b144e49b6433405c7ba.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22ARM: dts: ux500/golden: Set display max brightnessLinus Walleij1-0/+1
A too high brightness by default (default is max) makes the screen go blank. Set this to 15 as in the Vendor tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20201214223413.253893-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-22Merge tag 'omap-for-v5.11/defconfig-late-signed' of ↵Arnd Bergmann1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Late defconfig changes for omaps for v5.11 merge window Drop drop unused POWER_AVS option, and enable CONFIG_SPI_GPIO as a loadable module so gta04 needs it for controlling the td028ttec1 panel. * tag 'omap-for-v5.11/defconfig-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: enable SPI GPIO ARM: omap2plus_defconfig: drop unused POWER_AVS option ARM: omap2plus_defconfig: Enable TI eQEP counter driver ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m ARM: omap2plus_defconfig: Enable OMAP3_THERMAL Link: https://lore.kernel.org/r/pull-1607675790-251347@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 00:22:36 +0000