summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-04-28Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds3-3/+24
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86: Disable large pages on CPUs with Atom erratum AAE44 x86-64: Clear a 64-bit FS/GS base on fork if selector is nonzero x86, mrst: Conditionally register cpu hotplug notifier for apbt
2010-04-28Merge branch 'for-linus' of ↵Linus Torvalds2-38/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: compute Address Space length rather than using _LEN x86/PCI: never allocate PCI MMIO resources below BIOS_END
2010-04-28x86/PCI: compute Address Space length rather than using _LENBjorn Helgaas1-38/+2
ACPI _CRS Address Space Descriptors have _MIN, _MAX, and _LEN. Linux has been computing Address Spaces as [_MIN to _MIN + _LEN - 1]. Based on the tests in the bug reports below, Windows apparently uses [_MIN to _MAX]. Per spec (ACPI 4.0, Table 6-40), for _CRS fixed-size, fixed location descriptors, "_LEN must be (_MAX - _MIN + 1)", and when that's true, it doesn't matter which way we compute the end. But of course, there are BIOSes that don't follow this rule, and we're better off if Linux handles those exceptions the same way as Windows. This patch makes Linux use [_MIN to _MAX], as Windows seems to do. This effectively reverts d558b483d5 and 03db42adfe and replaces them with simpler code. https://bugzilla.kernel.org/show_bug.cgi?id=14337 (round) https://bugzilla.kernel.org/show_bug.cgi?id=15480 (truncate) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-27arch/avr32: fix build failure caused by wrong prototypePeter Huewe1-1/+1
This patch fixes a build failure introduced by 1d8393171 ("avr32: use generic ptrace_resume code") which had the static keyword as a leftover. arch/avr32/kernel/ptrace.c:32: error: static declaration of `user_enable_single_step' follows non-static declaration include/linux/ptrace.h:268: error: previous declaration of `user_enable_single_step' was here References: [1]http://kisskb.ellerman.id.au/kisskb/buildresult/2448162/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds34-124/+113
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits) omap: delete unused bootloader tag variables omap: Devkit8000: Remove unused pins omap: Devkit8000: Change position of init calls omap: Devkit8000: Remove unnecessary include file omap: Devkit8000: Fix typo in pin name omap: Devkit8000: Add missing package selection omap: Devkit8000: Fix typo in supplies n8x0_defconfig: remove CONFIG_NILFS2_FS override omap: board-sdp-flash.c: Fix typos in debug output omap4: Fix McBSP4 base address omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options omap: rx51_defconfig: Remove duplicate phonet omap: fix a gpmc nand problem AM3517: initialize i2c subsystem after mux subsystem omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled OMAP4: Clocks: Change SPI Instance Names omap: Devkit8000: Fix wrong usb port on Devkit8000 OMAP4: Fix for CONTROL register Base OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base ...
2010-04-26x86/PCI: never allocate PCI MMIO resources below BIOS_ENDBjorn Helgaas1-0/+3
When we move a PCI device or assign resources to a device not configured by the BIOS, we want to avoid the BIOS region below 1MB. Note that if the BIOS places devices below 1MB, we leave them there. See https://bugzilla.kernel.org/show_bug.cgi?id=15744 and https://bugzilla.kernel.org/show_bug.cgi?id=15841 Tested-by: Andy Isaacson <adi@hexapodia.org> Tested-by: Andy Bailey <bailey@akamai.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-24Merge branch 'for-linus' of ↵Linus Torvalds1-7/+37
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Ensure we re-enable devices on resume x86/PCI: parse additional host bridge window resource types PCI: revert broken device warning PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions
2010-04-24VMware Balloon driverDmitry Torokhov1-0/+2
This is a standalone version of VMware Balloon driver. Ballooning is a technique that allows hypervisor dynamically limit the amount of memory available to the guest (with guest cooperation). In the overcommit scenario, when hypervisor set detects that it needs to shuffle some memory, it instructs the driver to allocate certain number of pages, and the underlying memory gets returned to the hypervisor. Later hypervisor may return memory to the guest by reattaching memory to the pageframes and instructing the driver to "deflate" balloon. We are submitting a standalone driver because KVM maintainer (Avi Kivity) expressed opinion (rightly) that our transport does not fit well into virtqueue paradigm and thus it does not make much sense to integrate with virtio. There were also some concerns whether current ballooning technique is the right thing. If there appears a better framework to achieve this we are prepared to evaluate and switch to using it, but in the meantime we'd like to get this driver upstream. We want to get the driver accepted in distributions so that users do not have to deal with an out-of-tree module and many distributions have "upstream first" requirement. The driver has been shipping for a number of years and users running on VMware platform will have it installed as part of VMware Tools even if it will not come from a distribution, thus there should not be additional risk in pulling the driver into mainline. The driver will only activate if host is VMware so everyone else should not be affected at all. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Cc: Avi Kivity <avi@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-23x86: Disable large pages on CPUs with Atom erratum AAE44H. Peter Anvin1-0/+21
Atom erratum AAE44/AAF40/AAG38/AAH41: "If software clears the PS (page size) bit in a present PDE (page directory entry), that will cause linear addresses mapped through this PDE to use 4-KByte pages instead of using a large page after old TLB entries are invalidated. Due to this erratum, if a code fetch uses this PDE before the TLB entry for the large page is invalidated then it may fetch from a different physical address than specified by either the old large page translation or the new 4-KByte page translation. This erratum may also cause speculative code fetches from incorrect addresses." [http://download.intel.com/design/processor/specupdt/319536.pdf] Where as commit 211b3d03c7400f48a781977a50104c9d12f4e229 seems to workaround errata AAH41 (mixed 4K TLBs) it reduces the window of opportunity for the bug to occur and does not totally remove it. This patch disables mixed 4K/4MB page tables totally avoiding the page splitting and not tripping this processor issue. This is based on an original patch by Colin King. Originally-by: Colin Ian King <colin.king@canonical.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <1269271251-19775-1-git-send-email-colin.king@canonical.com> Cc: <stable@kernel.org>
2010-04-23x86-64: Clear a 64-bit FS/GS base on fork if selector is nonzeroH. Peter Anvin1-2/+2
When we do a thread switch, we clear the outgoing FS/GS base if the corresponding selector is nonzero. This is taken by __switch_to() as an entry invariant; it does not verify that it is true on entry. However, copy_thread() doesn't enforce this constraint, which can result in inconsistent results after fork(). Make copy_thread() match the behavior of __switch_to(). Reported-and-tested-by: Samuel Thibault <samuel.thibault@inria.fr> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <4BD1E061.8030605@zytor.com> Cc: <stable@kernel.org>
2010-04-23omap: delete unused bootloader tag variablesAaro Koskinen1-3/+0
They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unused pinsThomas Weber1-20/+0
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Change position of init callsThomas Weber1-4/+4
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unnecessary include fileThomas Weber1-1/+0
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in pin nameThomas Weber1-2/+2
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Add missing package selectionThomas Weber1-2/+4
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in suppliesThomas Weber1-1/+1
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim1-1/+0
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber1-4/+4
Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap4: Fix McBSP4 base addressSantosh Shilimkar1-1/+1
This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula1-2/+0
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula1-1/+0
Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix a gpmc nand problemstanley.miao1-0/+3
If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23AM3517: initialize i2c subsystem after mux subsystemstanley.miao1-2/+2
The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao1-2/+0
INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao1-0/+7
If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Clocks: Change SPI Instance NamesAbraham Arce1-4/+4
Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber1-2/+2
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Fix for CONTROL register BaseSantosh Shilimkar1-1/+1
This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala1-1/+1
This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra1-4/+4
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Fix n8x0 mmc_mmc_init compile warnings and typosTony Lindgren1-9/+9
Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap2: Fix ARM processor check for 24xxTony Lindgren1-1/+1
The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap4: Fix build break when used with gcc-4.4.1 (2009-q3)Richard Woodruff2-4/+4
This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22omap: DMA: Init CDAC to zeromanjugk manjugk1-0/+9
The register DMA4_CDAC needs to be initialized to zero before starting DMA transfer. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reported-by:S, Venkatraman <svenkatr@ti.com> Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTHJanusz Krzysztofik1-3/+3
Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression. Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22arm: omap1: remove dead code from timer32k.cFelipe Balbi1-15/+0
Trivial patch, no functional changes Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22omap: fix clocksource_32k to start from zeroAaro Koskinen1-5/+14
When the 32k sync timer is used for sched_clock(), it should count time from the kernel boot (clocksource init) instead of the last HW reset. Otherwise printk.time values will jump suddenly during the boot: [ 0.000000] calling omap2_clk_arch_init+0x0/0x138 @ 1 [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned -22 after 0 usecs [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned with error code -22 [ 0.000000] calling omap_init_clocksource_32k+0x0/0x98 @ 1 [ 508.697937] initcall omap_init_clocksource_32k+0x0/0x98 returned 0 after 0 usecs [ 508.697967] calling omap_init_devices+0x0/0x38 @ 1 [ 508.698425] initcall omap_init_devices+0x0/0x38 returned 0 after 0 usecs This will confuse tools such as scripts/bootgraph.pl. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22x86/PCI: parse additional host bridge window resource typesBjorn Helgaas1-6/+37
This adds support for Memory24, Memory32, and Memory32Fixed descriptors in PCI host bridge _CRS. I experimentally determined that Windows (2008 R2) accepts these descriptors and treats them as windows that are forwarded to the PCI bus, e.g., if it finds any PCI devices with BARs outside the windows, it moves them into the windows. I don't know whether any machines actually use these descriptors in PCI host bridge _CRS methods, but if any exist and they're new enough that we automatically turn on "pci=use_crs", they will work with Windows but not with Linux. Here are the details: https://bugzilla.kernel.org/show_bug.cgi?id=15817 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-22Merge branch 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/miscLinus Torvalds2-1/+1
* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: uml: Fix build breakage after slab.h changes
2010-04-22[S390] vdso: use ntp adjusted clock multiplierHendrik Brueckner7-12/+15
Commit "timekeeping: Fix clock_gettime vsyscall time warp" (0696b711e) introduced the new parameter "mult" to update_vsyscall(). This parameter contains the internal NTP adjusted clock multiplier. The s390x vdso did not use this adjusted multiplier. Instead, it used the constant clock multiplier for gettimeofday() and clock_gettime() variants. This may result in observable time warps as explained in commit 0696b711e. Make the NTP adjusted clock multiplier available to the s390x vdso implementation and use it for time calculations. Cc: <stable@kernel.org> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] add hook to reenable mss after hibernationSebastian Ott1-0/+3
Reenable multiple subchannel sets after hibernation, prior to the device callbacks. Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-21Merge branch 'for_2.6.34rc_a' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren59-127/+366
omap-fixes-for-linus
2010-04-21Merge branch 'for-linus' of ↵Linus Torvalds4-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: allow 4 coldfire serial ports m68knommu: fix coldfire tcdrain m68knommu: remove a duplicate vector setting line for 68360 Fix m68k-uclinux's rt_sigreturn trampoline m68knommu: correct the CC flags for Coldfire M5272 targets uclinux: error message when FLAT reloc symbol is invalid, v2
2010-04-21Merge branch 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-61/+61
* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix TSS size check for 16-bit tasks KVM: Add missing srcu_read_lock() for kvm_mmu_notifier_release() KVM: Increase NR_IOBUS_DEVS limit to 200 KVM: fix the handling of dirty bitmaps to avoid overflows KVM: MMU: fix kvm_mmu_zap_page() and its calling path KVM: VMX: Save/restore rflags.vm correctly in real mode KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTL KVM: Don't spam kernel log when injecting exceptions due to bad cr writes KVM: SVM: Fix memory leaks that happen when svm_create_vcpu() fails KVM: take srcu lock before call to complete_pio()
2010-04-21KVM: x86: Fix TSS size check for 16-bit tasksJan Kiszka1-1/+5
A 16-bit TSS is only 44 bytes long. So make sure to test for the correct size on task switch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-21m68knommu: fix coldfire tcdrainPhilippe De Muyter1-0/+5
Fix tcdrain on coldfire uarts. Currently with coldfire uarts tcdrain returns without waiting for txempty, because (tx)fifosize is 0. Fix that and call uart_update_timeout when setting the baud rate, otherwise tcdrain will wait for an half our :) Also constify mcf_uart_ops. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21m68knommu: remove a duplicate vector setting line for 68360Greg Ungerer1-1/+0
Remove a duplicate vector setting line for the 68360 interrupt setup. Pointed out by Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21Fix m68k-uclinux's rt_sigreturn trampolineMaxim Kuvyrkov1-1/+1
Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21m68knommu: correct the CC flags for Coldfire M5272 targetsPhilip Nye1-1/+1
Signed-off-by: Philip Nye <philipn@engarts.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 13:04:05 +0000