summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2012-11-28ARM: EXYNOS: Avoid early use of of_machine_is_compatible()Doug Anderson2-5/+19
The recent commit "ARM: EXYNOS: add support for EXYNOS5440 SoC" broke support for exynos5250 because of_machine_is_compatible() was used too early in the boot process. It also probably meant that the exynos5440 failed to use the proper iotable. Switch to use of_flat_dt_is_compatible() in both of these cases. The failure I was seeing in exynos5250 because of this was: Division by zero in kernel. [<80015ed4>] (unwind_backtrace+0x0/0xec) from [<8045c7a4>] (dump_stack+0x20/0x24) [<8045c7a4>] (dump_stack+0x20/0x24) from [<80012990>] (__div0+0x20/0x28) [<80012990>] (__div0+0x20/0x28) from [<8021ab04>] (Ldiv0_64+0x8/0x18) [<8021ab04>] (Ldiv0_64+0x8/0x18) from [<80068560>] (__clocksource_updatefreq_scale+0x54/0x134) [<80068560>] (__clocksource_updatefreq_scale+0x54/0x134) from [<8006865c>] (__clocksource_register_scale+0x1c/0x54) [<8006865c>] (__clocksource_register_scale+0x1c/0x54) from [<80612a18>] (exynos_timer_init+0x100/0x1e8) [<80612a18>] (exynos_timer_init+0x100/0x1e8) from [<8060d184>] (time_init+0x28/0x38) [<8060d184>] (time_init+0x28/0x38) from [<8060a754>] (start_kernel+0x1e0/0x3c8) [<8060a754>] (start_kernel+0x1e0/0x3c8) from [<40008078>] (0x40008078) Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> [olofj: fixed two build errors, one missing include and one !CONFIG_OF failure] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-26ARM: sunxi: Add missing sun4i.dtsi fileStefan Roese1-0/+19
Patch f055f1f6 [ARM: sunxi: Add sun4i and cubieboard support] missed this sun4i.dtsi include file. This patch finally brings it upstream enabling support for sun4i boards. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-26Merge branch 'next/soc-exynos5440' of ↵Olof Johansson13-21/+331
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: This is adding support for exynos5440, including Quad ARM Cortex-A15 cores and its reference board SSDK5440. Note, at this moment, just enabled minimal system part for initial kernel boot and pinctrl driver. * 'next/soc-exynos5440' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC ARM: dts: add initial dts file for EXYNOS5440, SSDK5440 ARM: EXYNOS: add support for EXYNOS5440 SoC Add/add conflict in arch/arm/boot/dts/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-25Merge tag 'imx-soc-1' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson9-151/+188
next/soc From Sascha Hauer: ARM i.MX SoC updates for v3.8 * tag 'imx-soc-1' of git://git.pengutronix.de/git/imx/linux-2.6: ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-23Merge branch 'depends/gpio-devel' into next/socOlof Johansson1-0/+1
Pulling in a newer version of the depend branch from the gpio tree, since there was some randconfig breakage introduced at the version we had, and we want to keep those things as bisectable as possible. It's not bad enough to warrant a rebase though, so there'll be a window of exposure to this. * depends/gpio-devel: gpio: SPEAr: add spi chipselect control driver gpio: gpio-max710x: Support device tree probing gpio: twl4030: Use only TWL4030_MODULE_LED for LED configuration gpio: tegra: read output value when gpio is set in direction_out gpio: pca953x: Add compatible strings to gpio-pca953x driver gpio: pca953x: Register an IRQ domain gpio: mvebu: Set free callback for gpio_chip gpio: tegra: Drop exporting static functions gpio: tegra: Staticize non-exported symbols gpio: tegra: fix suspend/resume apis gpio-pch: Set parent dev for gpio chip gpio: em: Fix build errors Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-22ARM i.MX6: remove gate_mask from pllv3Sascha Hauer3-17/+13
Now that the additional enable bits in the enet PLL are handled as gates, the gate_mask is identical for all plls. Remove the gate_mask from the code and use the BM_PLL_ENABLE bit for enabling/disabling the PLL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM i.MX6: Fix ethernet PLL clocksSascha Hauer2-63/+20
In current code the ethernet PLL is not handled correctly. The PLL runs at 500MHz and has different outputs. Only the enet reference clock is implemented. This patch changes the PLL so that it outputs 500MHz and adds the additional outputs as dividers. This now matches the datasheet which says: > This PLL synthesizes a low jitter clock from 24 MHz reference clock. > The PLL outputs a 500 MHz clock. The reference clocks generated by this PLL are: > • Ref_PCIe = 125 MHz > • Ref_SATA = 100 MHz > • Ref_ethernet, which is configurable based on the PLL_ENET[1:0] register field. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM i.MX6: rename PLLs according to datasheetSascha Hauer1-4/+4
In recent reference manuals the PLLs were renumbered. PLL8 now is PLL6 and vice versa. Change the code according to the reference manual to avoid confusion. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM i.MX6: Add pwm supportSascha Hauer1-0/+16
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM i.MX51: Add pwm supportSascha Hauer1-0/+18
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM i.MX53: Add pwm supportSascha Hauer1-0/+18
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM: mx5: Replace clk_register_clkdev with clock DT lookupFabio Estevam5-70/+102
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-22ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoCThomas Abraham1-0/+17
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22ARM: dts: add initial dts file for EXYNOS5440, SSDK5440Kukjin Kim3-1/+190
This patch adds initial dts file for EXYNOS5440 SoC and adds the dts file for SSDK5440 board which is a kind of reference board. More properties will be added later. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22ARM: EXYNOS: add support for EXYNOS5440 SoCKukjin Kim10-20/+124
This patch adds support for EXYNOS5440 SoC which is including ARM Cortex-A15 Quad cores. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21Merge branch 'sunxi/soc2' into next/socOlof Johansson8-59/+173
From Maxime Ripard: Here is a pull request to add the support for Allwinner A10 SoCs. * sunxi/soc2: ARM: sunxi: Add sunxi restart function via onchip watchdog ARM: sunxi: Add sun4i and cubieboard support ARM: sunxi: Add earlyprintk support for UART0 (sun4i) ARM: sunxi: Restructure sunxi dts/dtsi files Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge branch 'samsung/pinctrl' into next/socOlof Johansson2-240/+279
From Kukjin Kim: Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12 SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA PHY. As I commented on [4/7], this branch merged pinctrl/samsung to support pinctrl for exynos4x12 without useless merge conflicts. * samsung/pinctrl: pinctrl: samsung: Update error check for unsigned variables pinctrl: samsung: Add support for EXYNOS4X12 Documentation: Update samsung-pinctrl device tree bindings documentation pinctrl: samsung: Add GPIO to IRQ translation pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts pinctrl: samsung: Use one GPIO chip per pin bank pinctrl: exynos: Use one IRQ domain per pin bank pinctrl: samsung: Include bank-specific eint offset in bank struct pinctrl: samsung: Hold pointer to driver data in bank struct pinctrl: samsung: Match pin banks with their device nodes ARM: dts: exynos4210-pinctrl: Add nodes for pin banks pinctrl: samsung: Distinguish between pin group and bank nodes pinctrl: samsung: Remove static pin enumerations pinctrl: samsung: Assing pin numbers dynamically pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank pinctrl: samsung: Detect and handle unsupported configuration types
2012-11-21Merge branch 'clps711x/soc2' into next/socOlof Johansson23-580/+882
From Alexander Shiyan: The main direction of this patchset - approaching the platform to the possibility of using configurations with multiple platforms in a single kernel. Added support of the majority of the necessary kernel symbol. Also part of the driver code used only for the platform was moved to the board code and converted to the use of standard drivers. * clps711x/soc2: MAINTAINERS: Add ARM CLPS711X entry ARM: clps711x: Update defconfig due latest changes and new kernel symbols ARM: clps711x: Rename board files to match functionality ARM: clps711x: edb7211: Add support for NOR-Flash ARM: clps711x: Moving backlight controls of framebuffer driver to the board ARM: clps711x: p720t: Special driver for handling NAND memory is removed ARM: clps711x: Moving power management of framebuffer driver to the board ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed ARM: clps711x: Add FIQ interrupt handling ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform ARM: clps711x: cdb89712: Special driver for handling memory is removed ARM: clps711x: Always select AUTO_ZRELADDR for a platform ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it ARM: clps711x: p720t: Using "leds-gpio" driver for LED control ARM: clps711x: Using platform_driver for ethernet device
2012-11-21ARM: clps711x: Update defconfig due latest changes and new kernel symbolsAlexander Shiyan1-9/+21
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Rename board files to match functionalityAlexander Shiyan7-6/+6
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: edb7211: Add support for NOR-FlashAlexander Shiyan2-14/+35
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Moving backlight controls of framebuffer driver to the boardAlexander Shiyan3-7/+38
This patch moves the backlight controls for clps711x-framebuffer driver to the board code. To control we use "generic-bl" driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> [olof: fixed space/tab whitespace in drivers/video/clps711xfb.c] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: p720t: Special driver for handling NAND memory is removedAlexander Shiyan2-2/+51
This patch provide migration to using "gpio-nand" driver instead of using special driver for handling NAND memory. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Moving power management of framebuffer driver to the boardAlexander Shiyan3-2/+54
This patch moves the power management for clps711x-framebuffer driver to the board code. To control we use "platform-lcd" driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: autcpu12: Special driver for handling NAND memory is removedAlexander Shiyan2-10/+98
This patch provide migration to using "gpio-nand" and "basic-mmio-gpio" drivers instead of using special driver for handling NAND memory. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removedAlexander Shiyan1-10/+0
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Add FIQ interrupt handlingAlexander Shiyan3-3/+39
CLPS711X-target CPU can have a several FIQ interrupts. With this patch we adds handling for a one which will be used for ALSA PCM later. Since FIQ have a separate handler we only add "mask" and "unmask" calls which will used for enable/disable_irq functions. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platformAlexander Shiyan10-58/+50
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platformAlexander Shiyan10-46/+29
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: cdb89712: Special driver for handling memory is removedAlexander Shiyan2-0/+87
This patch provide migration to using "physmap-flash" and "mtd-ram" drivers instead of using special driver for handling memory. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: clps711x: Always select AUTO_ZRELADDR for a platformAlexander Shiyan2-1/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge branch 'depends/gpio-devel' into next/socOlof Johansson1-0/+2
This is required for some of the clps711x series, so we're bringing in the dependency explicitly. By Linus Walleij (5) and others via Linus Walleij * depends/gpio-devel: GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init() gpio/tc3589x: convert to use the simple irqdomain gpio/em: convert to linear IRQ domain gpio/mvebu: convert to use irq_domain_add_simple() gpio/tegra: convert to use linear irqdomain gpiolib: unlock on error in gpio_export() gpiolib: add gpio get direction callback support GPIO: clps711x: Fix direction logic for PORTD GPIO: clps711x: Fix return value for gpio_clps711x_get gpiolib: Refactor gpio_export GPIO: vt8500: Add extended gpio bank for WM8505/WM8650 gpio: clps711x: delete local <mach/gpio.h> header GPIO: Add support for GPIO on CLPS711X-target platform DA9055 GPIO driver gpio/gpio-omap: Use existing pointer to struct device gpio/gpio-pl061: Covert to use devm_* functions Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge tag 'highbank-debugll-cleanup' of ↵Olof Johansson7-46/+39
git://sources.calxeda.com/kernel/linux into next/soc From Rob Herring: Use common debug_ll_init function and remove the static mapping code from mach-highbank. * tag 'highbank-debugll-cleanup' of git://sources.calxeda.com/kernel/linux: ARM: highbank: use common debug_ll_io_init ARM: implement debug_ll_io_init()
2012-11-21Merge branch 'vexpress-clk-soc' of ↵Olof Johansson13-407/+898
git://git.linaro.org/people/pawelmoll/linux into next/soc From Pawel Moll: * 'vexpress-clk-soc' of git://git.linaro.org/people/pawelmoll/linux: ARM: vexpress: Remove motherboard dependencies in the DTS files ARM: vexpress: Start using new Versatile Express infrastructure ARM: vexpress: Add config bus components and clocks to DTs mfd: Versatile Express system registers driver mfd: Versatile Express config infrastructure
2012-11-21Merge branch 'depends/clk' into next/socOlof Johansson1-0/+2
From Mike Turquette: * depends/clk: clk: Common clocks implementation for Versatile Express clk: Versatile Express clock generators ("osc") driver CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock clk: fix return value check in sirfsoc_of_clk_init() clk: fix return value check in of_fixed_clk_setup() clk: ux500: Update sdmmc clock to 100MHz for u8500 clk: ux500: Support prcmu ape opp voltage clock mfd: dbx500: Export prmcu_request_ape_opp_100_voltage clk: Don't return negative numbers for unsigned values with !clk clk: Fix documentation typos clk: Document .is_enabled op clk: SPEAr: Vco-pll: Fix compilation warning
2012-11-21Merge tag 'bcm2835-for-3.8-defconfig' of ↵Olof Johansson1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc From Stephen Warren: ARM: bcm2835: defconfig updates procfs and sysfs are enabled in bcm2835_defconfig. * tag 'bcm2835-for-3.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: enable procfs and sysfs in defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge tag 'bcm2835-for-3.8-soc' of ↵Olof Johansson5-1/+94
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc From Stephen Warren: ARM: bcm2835: core SoC enhancements A machine restart/reboot implementation is added. The GPIO/pinmux controller is instantiated, and dummy gpio.h added. * tag 'bcm2835-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: enable GPIO/pinctrl ARM: bcm2835: implement machine restart hook Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge tag 'tegra-for-3.8-defconfig' of ↵Olof Johansson1-2/+19
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: defconfig update Many new features are enabled in tegra_defconfig: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. * tag 'tegra-for-3.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: defconfig updates
2012-11-21Merge tag 'tegra-for-3.8-cpuidle' of ↵Olof Johansson19-73/+1032
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: cpuidle enhancements A cpuidle state "LP2" is added, which power-gates the CPUs. Support for CPUs 1..n is essentially complete, although support for CPU0 could benefit from future use of coupled-cpuidle or similar techniques. A couple of very minor cleanups to cpuidle were included too. This pull request is based on tegra-for-3.8-soc. * tag 'tegra-for-3.8-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: retain L2 content over CPU suspend/resume ARM: tegra30: cpuidle: add powered-down state for CPU0 ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops ARM: tegra30: common: enable csite clock ARM: tegra30: cpuidle: add powered-down state for secondary CPUs ARM: tegra: cpuidle: add CPU resume function ARM: tegra: cpuidle: separate cpuidle driver for different chips ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX" ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE
2012-11-21Merge tag 'tegra-for-3.8-soc' of ↵Olof Johansson48-509/+834
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: core SoC code enhancements Various small clock initialization table and driver changes to support WiFi modules, SPI controllers, and host1x (graphics/display hardware). Various AHB/APB-related clocks were added to the Tegra30 clock driver. The level 2 cache initialization is now driven by data from device tree, and the cache configuration tweaked. AUXDATA is added to support SPI controllers and host1x. Code to decode Tegra's "speedo" process identification fuses is added. This pull request is based on tegra-for-3.8-cleanup. * tag 'tegra-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (26 commits) ARM: tegra: Add Tegra30 host1x clock support ARM: tegra: Add AUXDATA for Tegra30 host1x ARM: tegra: Add Tegra20 host1x clock support ARM: tegra: Add AUXDATA for Tegra20 host1x ARM: tegra: Tegra30 speedo-based process identification ARM: tegra: Add speedo-based process identification ARM: tegra: flexible spare fuse read function ARM: tegra: Implement 6395/1 for Tegra ARM: tegra: Add OF_DEV_AUXDATA for sflash driver in board dt ARM: tegra: enable data prefetch on L2 ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt ARM: tegra: common: using OF api for L2 cache init ARM: tegra: dt: add L2 cache controller ARM: tegra30: clocks: add AHB and APB clocks ARM: tegra: set up wlan clocks for tegra dt ARM: tegra: move irammap.h to mach-tegra ARM: tegra: move iomap.h to mach-tegra ARM: tegra: remove <mach/dma.h> ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/ ARM: tegra: remove unnecessary includes of <mach/*.h> ...
2012-11-21ARM: sunxi: Add sunxi restart function via onchip watchdogMaxime Ripard2-1/+40
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removedAlexander Shiyan1-5/+0
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20ARM: clps711x: Transform clps711x-framebuffer to platform driver and use itAlexander Shiyan3-0/+8
clps711x-framebuffer driver needs to be updated and this is a first step to make driver better. With this patch we are convert clps711x-framebuffer to platform device and load this driver from board code. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20ARM: clps711x: p720t: Using "leds-gpio" driver for LED controlAlexander Shiyan2-54/+23
Instead of manually create LED class device, we will use "leds-gpio" driver for LED control. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20ARM: clps711x: Using platform_driver for ethernet deviceAlexander Shiyan6-54/+43
This patch removes static mappings for ethernet devices. Now we will use platform_driver for ethernet devices. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20Merge branch 'clps711x/soc' into clps711x/soc2Olof Johansson16-289/+223
Conflicts: arch/arm/Kconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20Merge tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux ↵Olof Johansson12-0/+227
into next/soc From Maxime Ripard: Allwinner SoC support for 3.8 * tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux: ARM: sunxi: Add entry to MAINTAINERS ARM: sunxi: Add device tree for the A13 and the Olinuxino board ARM: sunxi: Add earlyprintk support ARM: sunxi: Add basic support for Allwinner A1x SoCs irqchip: sunxi: Add irq controller driver clocksource: sunxi: Add Allwinner A1X Timer Driver clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20ARM: sunxi: Add sun4i and cubieboard supportStefan Roese4-1/+50
This patch adds support for the Cubieboard based on the Allwinner A10/sun4i SoC. Currently only UART is supported. Other devices will eventually follow. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20ARM: sunxi: Add earlyprintk support for UART0 (sun4i)Stefan Roese2-2/+12
Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20ARM: sunxi: Restructure sunxi dts/dtsi filesStefan Roese3-56/+72
For the new sun4i/Cubieboard (A10) support, lets re-strucure the sun5i dts files to make it more generic. Those are the new dts/dtsi files: sunxi.dtsi - Devices common to all Allwinner sunXi SoC's sun4i.dtsi - sun4i Devices, will include sunxi.dtsi sun5i.dtsi - sun5i Devices, will include sunxi.dtsi board.dts - will include either sun4i.dtsi or sun5i.dtsi Additionally the "duart" label in the olinuxino.dts is changed to "uart1". Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 06:43:57 +0000