summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-11-06Merge branch 'rmobile-latest' of git://github.com/pmundt/linux-shLinus Torvalds14-197/+1062
* 'rmobile-latest' of git://github.com/pmundt/linux-sh: (21 commits) ARM: mach-shmobile: ag5evm needs CONFIG_I2C ARM: mach-shmobile: sh73a0 and AG5EVM PINT support ARM: mach-shmobile: Add support for PINT though INTC macros ARM: mach-shmobile: SDHI0 GPIO hotplug for AG5EVM ARM: mach-shmobile: Use common INTC IRQ code on sh73a0 ARM: mach-shmobile: Use common INTC IRQ code on sh7372 ARM: mach-shmobile: Use common INTC IRQ code on sh7377 ARM: mach-shmobile: Use common INTC IRQ code on sh7367 ARM: mach-shmobile: sh73a0 GPIO IRQ support ARM: sh7372 ap4evb NOR Flash USB boot fix ARM: mach-shmobile: sh7372 Mackerel NOR Flash USB boot fix sh: intc: Allow triggering on both edges for ARM SoCs ARM: mach-shmobile: Break out INTC IRQ code ARM: mach-shmobile: Kota2 SDHI0 and SDHI1 support ARM: mach-shmobile: Kota2 SCIFA4 and SCIFB support ARM: mach-shmobile: Kota2 MMCIF support ARM: mach-shmobile: Kota2 GPIO LEDs support ARM: mach-shmobile: Kota2 GPIO Keys support ARM: mach-shmobile: Kota2 KEYSC support ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support ...
2011-11-06Merge branch 'next' of ↵Linus Torvalds169-1327/+8416
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-06Merge branch 'fixes' of ↵Linus Torvalds5-5/+4
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: PXA: fix includes in pxa2xx_cm_x2xx PCMCIA driver ARM: PXA: fix gpio-pxa.h build errors ARM: 7142/1: davinci: mark GPIO implementation complex ARM: 7134/1: Revert "EXYNOS4: Fix routing timer interrupt to offline CPU" ARM: PXA: eseries: fix eseries_register_clks section mismatch warning ARM: PXA: fix lubbock PCMCIA driver build error
2011-11-06mrst pmu: update commentLen Brown1-1/+1
referenced MeeGo, in particular, but really means Linux, in general. Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynosKukjin Kim76-81/+106
The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has made for plaforms based on EXYNOS4 SoCs. But since upcoming Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most codes in current mach-exynos4, one mach-exynos directory will be used for them. This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos) but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to avoid changing in driver side. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-06ARM: EXYNOS4: convert MCT to percpu interrupt APIMarc Zyngier1-13/+27
MCT recently gained per cpu interrupts, and missed the fact that ARM has moved to a genirq based implementation. This patch converts the driver to the new API. Boot tested on Origen. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-06ARM: SAMSUNG: Add clk enable/disable of pwmJoonyoung Shim1-0/+7
PWM timers use pclk("timers" clk) as parent clk. If this pclk is the disabled state when PWM driver is probed, then it causes wrong read and write operation about registers of PWM. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-06ARM: SAMSUNG: Fix compile error due to kfreeJonghwan Choi1-0/+1
Fix following build error. arch/arm/plat-samsung/dev-backlight.c: In function 'samsung_bl_set': arch/arm/plat-samsung/dev-backlight.c:145: error: implicit declaration of function 'kfree' Signed-off-by: Jonghwan Choi <jhbird.choi@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-05Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds22-141/+615
* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
2011-11-05Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds218-5961/+5335
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
2011-11-05ARM: PXA: fix gpio-pxa.h build errorsRussell King1-1/+1
A mismerge in 43872fa (Merge branch 'depends/rmk/gpio' into next/fixes) causes these build errors: In file included from arch/arm/mach-pxa/include/mach/gpio.h:30, from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:31, from arch/arm/mach-pxa/generic.c:20: arch/arm/mach-pxa/include/mach/gpio-pxa.h: In function ■__gpio_is_occupied■: arch/arm/mach-pxa/include/mach/gpio-pxa.h:121: error: invalid operands to binary >> (have ■void *■ and ■unsigned int■) arch/arm/mach-pxa/include/mach/gpio-pxa.h:122: error: invalid operands to binary & (have ■void *■ and ■int■) arch/arm/mach-pxa/include/mach/gpio-pxa.h:129: error: invalid operands to binary & (have ■void *■ and ■int■) So fix them. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: 7142/1: davinci: mark GPIO implementation complexLinus Walleij1-0/+2
When breaking apart the DaVinci GPIO files I accidentally marked it non-complex while it is indeed complex. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: 7134/1: Revert "EXYNOS4: Fix routing timer interrupt to offline CPU"Kukjin Kim1-2/+0
This reverts commit 4bd0fe1c78623062263cf5ae875fd484c5b8256d. This implementation can introduce a problem and 'ARM: SMP: fix per cpu timer setup before the cpu is marked online' patch can solve the cpu_oneline vs. cpu_active problem so that should be reverted. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: PXA: eseries: fix eseries_register_clks section mismatch warningRussell King2-2/+1
Fix: WARNING: vmlinux.o(.text+0x1a820): Section mismatch in reference from the function eseries_register_clks() to the function .init.text:clkdev_add_table() The function eseries_register_clks() references the function __init clkdev_add_table(). This is often because eseries_register_clks lacks a __init annotation or the annotation of clkdev_add_table is wrong. by adding the __init annotation to eseries_register_clks() - this function is only called from other __init-marked functions. While we're here, mark it static as it's only called from within eseries.c. Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05ARM: EXYNOS4: Fix the merge conflictKukjin Kim1-3/+0
The mark of conflict should be removed. This happened at the commit fba9569924e0 ("Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma") Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ I always check the conflict resolution with "git diff" before I add the result, but I clearly missed that this time, and didn't notice the second conflict in that file after having fixed the first one. Oops, my bad. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-04ARM: OMAP2: Fix H4 matrix keyboard warningTony Lindgren1-53/+69
Convert to use matrix keyboard to remove the warning "Please update the board to use matrix-keypad driver". Based on similar setup in palmtc.c. Note that this patch is compile tested only because of lack of working hardware. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP1: Remove unused omap-alsa.hJarkko Nikula2-124/+0
There is no use for omap-alsa.h and board-palmz71.c doesn't need it either. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP1: Fix warnings about enabling 32 KiHz timerTony Lindgren1-1/+1
Fix "Enable 32kHz OS timer in order to allow sleep states in idle" warning. We are now compiling in bothe MPU timer and 32 KiHz timer, so this warning is only valid when MPU_TIMER is set and OMAP_DM_TIMER is not set. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: timer: Remove omap_device_pm_latencyBenoit Cousson1-11/+1
Remove the structure since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: clock data: Remove redundant timer clkdevBenoit Cousson4-47/+0
The commit 318c3e15cd55c73a26ae22a65a8183655b3003f9 added some "fck" clock alias to timer devices that are not needed anymore since hwmod framework will create them automatically. A warning was added to highlight and thus fix the redundancy. [ 0.616424] omap_timer.1: alias fck already exists [ 0.621948] omap_timer.2: alias fck already exists [ 0.627380] omap_timer.3: alias fck already exists [ 0.632781] omap_timer.4: alias fck already exists [ 0.638214] omap_timer.5: alias fck already exists [ 0.643615] omap_timer.6: alias fck already exists [ 0.649078] omap_timer.7: alias fck already exists [ 0.654479] omap_timer.8: alias fck already exists [ 0.659881] omap_timer.9: alias fck already exists [ 0.665283] omap_timer.10: alias fck already exists [ 0.670776] omap_timer.11: alias fck already exists Remove all the clkdev entries for timer fck alias. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpioThomas Weber1-1/+0
Remove the init of card detect pin because omap_mux_init_gpio() is called during hsmmc initialization for the write protect and card detect pin. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: usb: musb: OMAP: Delete unused functionBjarne Steinsbo1-38/+0
Not in use anymore. Signed-off-by: Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds33-1762/+1229
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-04ARM: OMAP: change get_context_loss_count ret value to intTomi Valkeinen9-20/+36
get_context_loss_count functions return context loss count as u32, and zero means an error. However, zero is also returned when context has never been lost and could also be returned when the context loss count has wrapped and goes to zero. Change the functions to return an int, with negative value meaning an error. OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the hsmmc code handles the returned value as an int, with negative value meaning an error, this patch actually fixes hsmmc code also. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated to fix a warning with recent dmtimer changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properlyBalaji T K1-1/+1
Fix the typo, instead it should be SDMMC1 USBC1 is not related to MMC1 I/Os Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFFBalaji T K1-12/+2
MMC1 data line IO's are powered down in before set regulator function. IO's should not be powered ON when regulator is OFF. Keep the IO's in power pown mode after regulator OFF otherwise VMODE_ERROR interrupt is generated due to mismatch in input (regulator) voltage and MMC IO drive voltage. Delete incorrect comments which are not applicable for OMAP4. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Reported-by: Viswanath Puttagunta <vishp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from ↵Paul Walmsley1-2/+2
common list Commit d6504acd2125984c61dce24727dd3842d0144015 ("OMAP2+: hwmod: remove OMAP_CHIP*") tests the inverse condition of what it should be testing for the return value from omap_hwmod_register(). This causes several IP blocks to not be registered on several OMAP3 family devices. Fixing that bug also unmasked another bug, originally reported by Chase Maupin <chase.maupin@ti.com> and then subsequently by Abhilash K V <abhilash.kv@ti.com>, which caused SmartReflex IP blocks to be registered on SoCs that don't support them. Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for comments on a previous version of the patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Chase Maupin <chase.maupin@ti.com> Cc: Abhilash K V <abhilash.kv@ti.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on successLaurent Pinchart1-1/+1
Commit 4d17aeb1c5b2375769446d13012a98e6d265ec13 ("OMAP: I2C: split device registration and convert OMAP2+ to omap_device") makes omap2_i2c_add_bus() return a pointer to an omap_device instead on success instead of 0. This breaks the omap_register_i2c_bus() ABI and results in the igep0020 board code detecting an I2C bus registration error when there is none. Fix the problem by using PTR_RET() instead of PTR_ERR() in omap2_i2c_add_bus(). Reported-by: Alexander Kinzer <a.kinzer@plusoptix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [tony@atomide.com: updated to return pdev instead of od] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: dmtimer: Include linux/module.hAxel Lin1-0/+1
Include linux/module.h to fix below build error: CC arch/arm/plat-omap/dmtimer.o arch/arm/plat-omap/dmtimer.c:184: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:184: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:184: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:215: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:215: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:215: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:228: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:228: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:228: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:234: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:234: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:234: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:240: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:240: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:240: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:248: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:248: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:248: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:294: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:294: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:294: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:302: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:302: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:302: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:316: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:316: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:316: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:344: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:344: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:344: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:361: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:361: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:361: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:380: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:380: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:380: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:406: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:406: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:406: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:443: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:443: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:443: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:468: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:468: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:468: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:494: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:494: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:494: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:517: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:517: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:517: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:534: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:534: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:534: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:549: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:549: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:549: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:561: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:561: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:561: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:572: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:572: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:572: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:587: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:587: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:587: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:604: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:604: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:604: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:746: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:746: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:746: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-omap/dmtimer.c:746: warning: function declaration isn't a prototype arch/arm/plat-omap/dmtimer.c:747: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:747: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:747: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-omap/dmtimer.c:747: warning: function declaration isn't a prototype arch/arm/plat-omap/dmtimer.c:748: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:748: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:748: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' arch/arm/plat-omap/dmtimer.c:748: warning: function declaration isn't a prototype arch/arm/plat-omap/dmtimer.c:749: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:749: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:749: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-omap/dmtimer.c:749: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-omap/dmtimer.o] Error 1 make: *** [arch/arm/plat-omap] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: l3-noc: Include linux/module.hAxel Lin1-0/+1
Include linux/module.h to fix below build error: CC arch/arm/mach-omap2/omap_l3_noc.o arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' arch/arm/mach-omap2/omap_l3_noc.c:250: error: 'THIS_MODULE' undeclared here (not in a function) make[1]: *** [arch/arm/mach-omap2/omap_l3_noc.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: devices: Fixes for McPDMPeter Ujfalusi1-14/+3
Commit f718e2c034bf6ff872106344935006230764cb12 (ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures) removed these structures. Commit 3528c58eb9e818b7821501afa2916eb12131994a (OMAP: omap_device: when building return platform_device instead of omap_device) now returns platform_device instead of omap_device. Fix up the omap-mcpdm init function since this part comes via sound tree, and there has been changes regarding to hwmod/omap_device_build. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Benoit Cousson <b-cousson@ti.com> CC: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: Fix errors and warnings when building for one boardSanjeev Premi2-0/+14
When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04Merge branch 'for_3.2/pm-cleanup-2' of ↵Tony Lindgren3-39/+53
git://github.com/khilman/linux-omap-pm into fixes
2011-11-04Merge branch 'prcm_scm_misc_fixes_3.2' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren2-9/+12
fixes
2011-11-04Merge branch 'omap_clock_fixes_3.2' of git://git.pwsan.com/linux-2.6 into fixesTony Lindgren6-28/+142
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds2-8/+3
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-11-04Merge branch 'for-linus' of git://github.com/cmetcalf-tilera/linux-tileLinus Torvalds20-4396/+4637
* 'for-linus' of git://github.com/cmetcalf-tilera/linux-tile: arch/tile: factor out <arch/opcode.h> header arch/tile: add the <arch> headers to the set of installed kernel headers arch/tile: avoid exporting a symbol no longer used by gcc arch/tile: avoid ISO namespace pollution with <asm/sigcontext.h>
2011-11-04Merge branch 'process_vm' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux * 'process_vm' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Wire up cross memory attach syscalls
2011-11-05ARM: mach-shmobile: ag5evm needs CONFIG_I2CGuennadi Liakhovetski1-0/+1
ag5evm implements a backlight control, using an I2C controller, therefore it needs CONFIG_I2C to fix this make failure arch/arm/mach-shmobile/built-in.o: In function `lcd_on': pfc-sh73a0.c:(.text+0x2334): undefined reference to `i2c_get_adapter' pfc-sh73a0.c:(.text+0x2370): undefined reference to `i2c_transfer' (ignore pfc-sh73a0.c) and to build successfully. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: sh73a0 and AG5EVM PINT supportMagnus Damm3-15/+71
Support PINT on sh73a0 and AG5EVM using INTC PINT macros. With this patch applied the AG5EVM ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: Add support for PINT though INTC macrosMagnus Damm1-0/+51
Add a INTC_PINT() macro with various helper bits to allow SoCs like sh73a0 to suppor the PINT hardware using regular INTC tables. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: SDHI0 GPIO hotplug for AG5EVMMagnus Damm1-0/+19
Implement GPIO hotplugging via TMIO_MMC_HAS_COLD_CD for AG5EVM SDHI0. This is possible now when INTCA is used for IRQ triggering on sh73a0. Without INTCA IRQ support we are left with the GIC hardware block that does not support dealing with active low interrupt sources. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh73a0Magnus Damm2-33/+157
Improve IRQ triggering support by making use of the macro INTC_IRQ_PINS_32() for INTCA on sh73a0. Unfortunately it is not as easy as just using the macro as-is, we need to do mask and unmaks in the GIC but configure other bits and ack in INTCA. Update GPIO IRQ mappings while at it. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh7372Magnus Damm1-64/+8
Make use of INTC_IRQ_PINS_32() for INTCA on sh7372. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh7377Magnus Damm1-61/+6
Make use of INTC_IRQ_PINS_32() for INTCA on sh7377. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh7367Magnus Damm1-34/+6
Make use of INTC_IRQ_PINS_16() for INTCA on sh7367. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: sh73a0 GPIO IRQ supportMagnus Damm1-0/+41
This patch adds support for sh73a0 GPIO IRQs by making use of the PFC GPIO IRQ feature. Only IRQ pins are supported at this time. In the future when PINT interrupts also are supported properly we can easily extend the table with such information. Also, the sh73a0 is currently making use of the GIC for external interrupt which is rather unflexible when it comes to triggering configuration at this point. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: sh7372 ap4evb NOR Flash USB boot fixBastian Hecht1-2/+2
Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on ap4evb. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: sh7372 Mackerel NOR Flash USB boot fixMagnus Damm1-2/+2
Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on Mackerel. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: Break out INTC IRQ codeMagnus Damm1-0/+195
Add INTC_IRQ_PINS_16() and INTC_IRQ_PINS_32() to mach/intc.h. These macros define 16 or 32 external IRQ pins on a certain memory base address. Can be used with INTCA or INTCS. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-29 05:59:36 +0000