summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-07-31Merge branch 'for-linus' of ↵Linus Torvalds10-931/+144
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/math-emu: Remove unnecessary code m68k/math-emu: Remove commented out old code m68k: Kill warning in setup_arch() when compiling for Sun3 m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_ sparc: iounmap() and *_free_coherent() - Use lookup_resource() m68k/atari: Reserve some ST-RAM early on for device buffer use m68k/amiga: Chip RAM - Use lookup_resource() resources: Add lookup_resource() sparc: _sparc_find_resource() should check for exact matches m68k/amiga: Chip RAM - Offset resource end by CHIP_PHYSADDR m68k/amiga: Chip RAM - Use resource_size() to fix off-by-one error m68k/amiga: Chip RAM - Change chipavail to an atomic_t m68k/amiga: Chip RAM - Always allocate from the start of memory m68k/amiga: Chip RAM - Convert from printk() to pr_*() m68k/amiga: Chip RAM - Use tabs for indentation
2011-07-30m68k/math-emu: Remove unnecessary codeGreg Dietsche1-3/+0
Remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/math-emu: Remove commented out old codeGeert Uytterhoeven1-530/+0
It's been unused for ages, and contains bugs (e.g. incorrect shifts in lsl64()). Reported-by: Jonathan Elchison <jelchison@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k: Kill warning in setup_arch() when compiling for Sun3Geert Uytterhoeven1-0/+2
arch/m68k/kernel/setup_mm.c: In function ‘setup_arch’: arch/m68k/kernel/setup_mm.c:219: warning: unused variable ‘i’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_Geert Uytterhoeven1-2/+2
These defines are way to generic, and cause conflicts: drivers/net/wireless/rtlwifi/rtl8192c/../rtl8192ce/reg.h:369:1: warning: "GPIO_IN" redefined drivers/net/wireless/rtlwifi/rtl8192c/../rtl8192ce/reg.h:370:1: warning: "GPIO_OUT" redefined drivers/net/wireless/rtlwifi/rtl8192se/reg.h:252:1: warning: "GPIO_IN" redefined drivers/net/wireless/rtlwifi/rtl8192se/reg.h:253:1: warning: "GPIO_OUT" redefined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30sparc: iounmap() and *_free_coherent() - Use lookup_resource()Geert Uytterhoeven1-25/+7
Replace a custom implementation (which doesn't lock the resource tree) by a call to lookup_resource() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net>
2011-07-30m68k/atari: Reserve some ST-RAM early on for device buffer useMichael Schmitz4-298/+70
Based on an original patch from Michael Schmitz: Because mem_init() is now called before device init, devices that rely on ST-RAM may find all ST-RAM already allocated to other users by the time device init happens. In particular, a large initrd RAM disk may use up enough of ST-RAM to cause atari_stram_alloc() to resort to __get_dma_pages() allocation. In the current state of Atari memory management, all of RAM is marked DMA capable, so __get_dma_pages() may well return RAM that is not in actual fact DMA capable. Using this for frame buffer or SCSI DMA buffer causes subtle failure. The ST-RAM allocator has been changed to allocate memory from a pool of reserved ST-RAM of configurable size, set aside on ST-RAM init (i.e. before mem_init()). As long as this pool is not exhausted, allocation of real ST-RAM can be guaranteed. Other changes: - Replace the custom allocator in the ST-RAM pool by the existing allocator in the resource subsystem, - Remove mem_init_done and its hook, as memory init is now done before device init, - Remove /proc/stram, as ST-RAM usage now shows up under /proc/iomem, e.g. 005f2000-006f1fff : ST-RAM Pool 005f2000-0063dfff : atafb 0063e000-00641fff : ataflop 00642000-00642fff : SCSI Signed-off-by: Michael Schmitz <schmitz@debian.org> [Andreas Schwab <schwab@linux-m68k.org>: Use memparse()] [Geert: Use the resource subsystem instead of a custom allocator] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/amiga: Chip RAM - Use lookup_resource()Geert Uytterhoeven1-11/+11
Replace a custom implementation (which doesn't lock the resource tree) by a call to lookup_resource() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30sparc: _sparc_find_resource() should check for exact matchesGeert Uytterhoeven1-2/+2
The address that's passed to _sparc_find_resource() should always be the start address of a resource: - iounmap() passes a page-aligned virtual address, while the original address was created by adding the in-page offset to the resource's start address, - sbus_free_coherent() and pci32_free_coherent() should be passed an address obtained from sbus_alloc_coherent() resp. pci32_alloc_coherent(), which is always a resource's start address. Hence replace the range check by a check for an exact match. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net>
2011-07-30m68k/amiga: Chip RAM - Offset resource end by CHIP_PHYSADDRGeert Uytterhoeven1-1/+1
Technically, the end of Chip RAM should be offset by CHIP_PHYSADDR (which is zero). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/amiga: Chip RAM - Use resource_size() to fix off-by-one errorGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/amiga: Chip RAM - Change chipavail to an atomic_tGeert Uytterhoeven1-6/+9
While the core resource handling code is safe, our global counter must still be protected against concurrent modifications. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/amiga: Chip RAM - Always allocate from the start of memoryGeert Uytterhoeven1-20/+15
As of commit 5df1abdbd37af2ae317a1c5b5944173284dc55d6 ('m68k/amiga: Fix "debug=mem"'), "debug=mem" no longer uses amiga_chip_alloc_res(), so we can remove the hack to prefer memory at the safe end. This allows to simplify the code and make amiga_chip_alloc() just call amiga_chip_alloc_res() internally. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/amiga: Chip RAM - Convert from printk() to pr_*()Geert Uytterhoeven1-20/+8
and fix a few formattings: - resource sizes are now resource_size_t, use %pR to make it future proof, - use %lu for unsigned long. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30m68k/amiga: Chip RAM - Use tabs for indentationGeert Uytterhoeven1-57/+61
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30Merge branch 'v4l_for_linus' of ↵Linus Torvalds4-23/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
2011-07-29frv: remove unnecessary codeGreg Dietsche1-7/+1
remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-29Merge branch 'linux-next' of ↵Linus Torvalds107-124/+152
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove printks about disabled bridge windows PCI: fold pci_calc_resource_flags() into decode_bar() PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR PCI: correct pcie_set_readrq write size PCI: pciehp: change wait time for valid configuration access x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems PCI: ARI is a PCIe v2 feature x86/PCI: quirks: Use pci_dev->revision PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. PCI hotplug: cpqphp: use pci_dev->vendor PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device} x86/PCI: config space accessor functions should not ignore the segment argument PCI: Assign values to 'pci_obff_signal_type' enumeration constants x86/PCI: reduce severity of host bridge window conflict warnings PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI PCI: PCIe AER: add aer_recover_queue x86/PCI: select direct access mode for mmconfig option PCI hotplug: Rename is_ejectable which also exists in dock.c
2011-07-29Merge branch 'upstream/xen-tracing2' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/tracing: fix compile errors when tracing is disabled.
2011-07-29Merge branch 'at91/cleanup' of ↵Linus Torvalds58-745/+696
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'at91/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: at91: add arch specific ioremap support at91: factorize sram init at91: move register clocks to soc generic init at91: move clock subsystem init to soc generic init at91: use structure to store the current soc at91: remove AT91_DBGU offset from dbgu register macro at91: factorize at91 interrupts init to soc at91: introduce commom AT91_BASE_SYS
2011-07-29Merge branch 'next/dt' of ↵Linus Torvalds47-125/+933
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits) arm/dt: tegra devicetree support arm/versatile: Add device tree support dt/irq: add irq_domain_generate_simple() helper irq: add irq_domain translation infrastructure dmaengine: imx-sdma: add device tree probe support dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name dmaengine: imx-sdma: use platform_device_id to identify sdma version mmc: sdhci-esdhc-imx: add device tree probe support mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() mmc: sdhci-esdhc-imx: do not reference platform data after probe mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 net/fec: add device tree probe support net: ibm_newemac: convert it to use of_get_phy_mode dt/net: add helper function of_get_phy_mode net/fec: gasket needs to be enabled for some i.mx serial/imx: add device tree probe support serial/imx: get rid of the uses of cpu_is_mx1() arm/dt: Add dtb make rule arm/dt: Add skeleton dtsi file ...
2011-07-29Merge branch 'fixes' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: zynq: remove incorrectly deleted file ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
2011-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdogLinus Torvalds1-37/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits) watchdog: WatchDog Timer Driver Core - Add minimum and max timeout watchdog: WatchDog Timer Driver Core - Add ioctl call watchdog: WatchDog Timer Driver Core - Add nowayout feature watchdog: WatchDog Timer Driver Core - Add Magic Close feature watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality watchdog: WatchDog Timer Driver Core - Add basic framework watchdog: hpwdt: add next gen HP servers watchdog: it8712f_wdt.c: improve includes watchdog: at91sam9/wdt: move register header to drivers watchdog: Add Xilinx watchdog timer driver watchdog: remove empty pm-functions watchdog: sp805: Flush posted writes in enable/disable. watchdog: sp805: Don't write 0 to the load value register. watchdog: imx2_wdt: add device tree probe support watchdog: s3c2410: Add support for device tree based probe watchdog: mpcore_wdt: Add suspend/resume support. watchdog: mtx1-wdt: use dev_{err,info} instead of printk() ...
2011-07-28ARM: zynq: remove incorrectly deleted fileArnd Bergmann2-1/+1
My previous commit left the file empty and present in the Makefile, which is a bit dirty and caused problems with 'make distclean', as pointed out by David Howells. This hopefully cleans it up the right way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Howells <dhowells@redhat.com> Acked-by: John Linn <john.linn@xilinx.com>
2011-07-28Merge branch 'imx/dt' into next/dtArnd Bergmann1216-18148/+27830
2011-07-28at91: add arch specific ioremap supportJean-Christophe PLAGNIOL-VILLARD2-1/+29
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: factorize sram initJean-Christophe PLAGNIOL-VILLARD9-115/+39
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: move register clocks to soc generic initJean-Christophe PLAGNIOL-VILLARD9-21/+11
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: move clock subsystem init to soc generic initJean-Christophe PLAGNIOL-VILLARD10-31/+18
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: use structure to store the current socJean-Christophe PLAGNIOL-VILLARD10-120/+341
instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: remove AT91_DBGU offset from dbgu register macroJean-Christophe PLAGNIOL-VILLARD5-25/+28
to make the soc base specified at runtime instead of compiled time Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-07-28at91: factorize at91 interrupts init to socJean-Christophe PLAGNIOL-VILLARD45-322/+61
they are the same except the default priority Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: introduce commom AT91_BASE_SYSJean-Christophe PLAGNIOL-VILLARD54-173/+232
On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28arm/dt: tegra devicetree supportGrant Likely7-0/+368
Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-28arm/versatile: Add device tree supportGrant Likely7-0/+366
For testing the dt work, define a dt-enabled versatile platform. This patch adds a new versatile platform for when using the device tree. Add platform and amba devices are discovered and registered by parsing the device tree. Clocks and initial io mappings are still configured statically. This patch still depends on some static platform_data for a few devices which is passed via the auxdata structure to of_platform_populate(), but it is a viable starting point until the drivers can get all configuration data out of the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-28irq: add irq_domain translation infrastructureGrant Likely3-19/+1
This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-27sparc: Detect and handle UltraSPARC-T3 cpu types.David S. Miller7-4/+50
The cpu compatible string we look for is "SPARC-T3". As far as memset/memcpy optimizations go, we treat this chip the same as Niagara-T2/T2+. Use cache initializing stores for memset, and use perfetch, FPU block loads, cache initializing stores, and block stores for copies. We use the Niagara-T2 perf support, since T3 is a close relative in this regard. Later we'll add support for the new events T3 can report, plus enable T3's new "sample" mode. For now I haven't added any new ELF hwcap flags. We probably need to add a couple, for example: T2 and T3 both support the population count instruction in hardware. T3 supports VIS3 instructions, including support (finally) for partitioned shift. One can also now move directly between float and integer registers. T3 supports instructions meant to help with Galois Field and other HPC calculations, such as XOR multiply. Also there are "OP and negate" instructions, for example "fnmul" which is multiply-and-negate. T3 recognizes the transactional memory opcodes, however since transactional memory isn't supported: 1) 'commit' behaves as a NOP and 2) 'chkpt' always branches 3) 'rdcps' returns all zeros and 4) 'wrcps' behaves as a NOP. So we'll need about 3 new elf capability flags in the end to represent all of these things. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27sparc: Don't do expensive hypervisor PCR write unless necessary.David S. Miller1-2/+5
The hypervisor call is only necessary if hypervisor events are being requested. So if we're not tracking hypervisor events, simply do a direct register write. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27sparc: Add T3 sun4v cpu type and hypervisor group defines.David S. Miller3-0/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27sparc: Don't leave sparc_pmu_type NULL on sun4v.David S. Miller1-0/+1
Otherwise we'll crash in the sparc perf init code. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27[media] V4L: soc-camera: remove soc-camera bus and devices on itGuennadi Liakhovetski2-15/+13
Now that v4l2 subdevices have got their own device objects, having one more device in soc-camera clients became redundant and confusing. This patch removes those devices and the soc-camera bus, they used to reside on. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifierGuennadi Liakhovetski1-8/+4
This moves us one more step closer to eliminating the soc-camera bus and devices on it. Besides, as a side effect, CSI-2 runtime PM on sh-mobile secomes finer grained now: we only have to power on the interface, when the device nodes are open. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] OMAP3: RX-51: define vdds_csib regulator supplyKalle Jokiniemi1-0/+5
The RX-51 uses the CSIb IO complex for camera operation. The board file is missing definition for the regulator supplying the CSIb complex, so this is added for better power management. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27sparc: rename atomic_add_unlessStephen Rothwell1-2/+2
Should have been done in commit 1af08a1407f4 ("This is in preparation for more generic atomic"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arun Sharma <asharma@fb.com> Cc: David Miller <davem@davemloft.net> Cc: "Hans-Christian Egtvedt" <hans-christian.egtvedt@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds16-133/+149
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Do not show error message for 32 interrupt lines Revert "microblaze: PCI fix typo fault in of_node pointer moving into pci_bus" microblaze: PCI fix typo fault in of_node pointer moving into pci_bus microblaze: Add support for early console on mdm microblaze: Simplify early console binding from DT microblaze: Get early printk console earlier microblaze: Standardise cpuinfo output for cache policy microblaze: Unprivileged stream instruction awareness microblaze: trivial: Fix typo fault microblaze: exec: Remove redundant set_fs(USER_DS) microblaze: Remove duplicated prototype of start_thread() microblaze: Fix unaligned value saving to the stack for system with MMU microblaze/irqs: Do not trace arch_local_{*,irq_*} functions
2011-07-27ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOCUwe Kleine-König1-3/+3
This fixes: warning: (MACH_HARMONY && MACH_KAEN && MACH_SEABOARD) selects MACH_HAS_SND_SOC_TEGRA_WM8903 which has unmet direct dependencies (SOUND && !M68K && SND && SND_SOC) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-By: Colin Cross <ccross@android.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-27microblaze: Do not show error message for 32 interrupt linesMichal Simek1-1/+1
When interrupt controller uses 32 interrupts lines the kernel show error message about mismatch in kind-of-intr parameter because it exceeds u32. Recast fixs this issue. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-27dmaengine: imx-sdma: use platform_device_id to identify sdma versionShawn Guo12-21/+21
It might be not good to use software defined version to identify sdma device type, when hardware does not define such version. Instead, soc name is stable enough to define the device type. The patch uses platform_device_id rather than version number passed by platform data to identify sdma device type/version. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-07-27mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()Shawn Guo6-23/+25
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the esdhc differences among SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5Shawn Guo8-12/+53
The patch extends card_detect and write_protect support to get mx5 family and more scenarios supported. The changes include: * Turn platform_data from optional to mandatory * Add cd_types and wp_types into platform_data to cover more use cases * Remove the use of flag ESDHC_FLAG_GPIO_FOR_CD * Adjust some machine codes to adopt the platform_data changes * Work around the issue that software reset will get card detection circuit stop working With this patch, card_detect and write_protect gets supported on mx5 based platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 16:30:18 +0000