summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-06-11Merge branch 'pm-fixes' of ↵Linus Torvalds3-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds4-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11PCI: clear bridge resource range if BIOS assigned bad oneYinghai Lu4-0/+5
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: Yannick <yannick.roehlly@free.fr> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-10Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-2/+103
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: read apic->irr with ioapic lock held KVM: ia64: Add missing spin_unlock in kvm_arch_hardware_enable() KVM: Fix order passed to iommu_unmap KVM: MMU: Remove user access when allowing kernel access to gpte.w=0 page KVM: MMU: invalidate and flush on spte small->large page size change KVM: SVM: Implement workaround for Erratum 383 KVM: SVM: Handle MCEs early in the vmexit process KVM: powerpc: fix init/exit annotation
2010-06-10Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix null pointer deref with SEND_SIG_FORCED perf: Fix signed comparison in perf_adjust_period() powerpc/oprofile: fix potential buffer overrun in op_model_cell.c perf symbols: Set the DSO long name when using symbol_conf.vmlinux_name
2010-06-10Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds19-30/+206
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6164/1: Add kto and kfrom to input operands list. ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6 ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging ARM: 6152/1: ux500 make it possible to disable localtimers [ARM] pxa/spitz: Correctly register WM8750 [ARM] pxa/palmtc: storage class should be before const qualifier ARM: 6146/1: sa1111: Prevent deadlock in resume path ARM: 6145/1: ux500 MTU clockrate correction ARM: 6144/1: TCM memory bug freeing bug ARM: VFP: Fix vfp_put_double() for d16-d31
2010-06-09FRV: Reinstate null behaviour for the GDB remote protocol 'p' commandDavid Howells1-0/+6
Reinstate the null behaviour that the in-kernel gdbstub had for the GDB remote protocol 'p' command (retrieve a single register value) prior to commit 7ca8b9c0dafd ("frv: extend gdbstub to support more features of gdb"). Before that, the 'p' command just returned an empty reply, which causes gdb to then go and use the 'g' command. However, since that commit, the 'p' command returns an error string, which causes gdb to abort its connection to the target. Not all gdb versions are affected, some use try 'g' first, and if that works, don't bother with 'p', and so don't see the error. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-09Merge branch 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds1-0/+1
* 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: mmc: msm: fix compile error on MSM7x30 msm: dma: add completion.h header
2010-06-09KVM: ia64: Add missing spin_unlock in kvm_arch_hardware_enable()Julia Lawall1-0/+1
Add a spin_unlock missing on the error path. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * spin_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * spin_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09KVM: MMU: Remove user access when allowing kernel access to gpte.w=0 pageAvi Kivity1-0/+3
If cr0.wp=0, we have to allow the guest kernel access to a page with pte.w=0. We do that by setting spte.w=1, since the host cr0.wp must remain set so the host can write protect pages. Once we allow write access, we must remove user access otherwise we mistakenly allow the user to write the page. Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09KVM: MMU: invalidate and flush on spte small->large page size changeMarcelo Tosatti1-0/+2
Always invalidate spte and flush TLBs when changing page size, to make sure different sized translations for the same address are never cached in a CPU's TLB. Currently the only case where this occurs is when a non-leaf spte pointer is overwritten by a leaf, large spte entry. This can happen after dirty logging is disabled on a memslot, for example. Noticed by Andrea. KVM-Stable-Tag Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09KVM: SVM: Implement workaround for Erratum 383Joerg Roedel2-0/+82
This patch implements a workaround for AMD erratum 383 into KVM. Without this erratum fix it is possible for a guest to kill the host machine. This patch implements the suggested workaround for hypervisors which will be published by the next revision guide update. [jan: fix overflow warning on i386] [xiao: fix unused variable warning] Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09KVM: SVM: Handle MCEs early in the vmexit processJoerg Roedel1-1/+14
This patch moves handling of the MC vmexits to an earlier point in the vmexit. The handle_exit function is too late because the vcpu might alreadry have changed its physical cpu. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09KVM: powerpc: fix init/exit annotationJean Delvare1-1/+1
kvmppc_e500_exit() is a module_exit function, so it should be tagged with __exit, not __init. The incorrect annotation was added by commit 2986b8c72c272ea58edd37903b042c6da985627d. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09microblaze: Fix sg_dma_len() regressionFUJITA Tomonori1-1/+0
The commit "asm-generic: add NEED_SG_DMA_LENGTH to define sg_dma_len()" 18e98307de0d746cb0845ebf66535ce2184c25a2 broke microblaze compilation. dma_direct_map_sg() sets sg->dma_length, however microblaze doesn't set NEED_SG_DMA_LENGTH so scatterlist strcutres doesn't include dma_length. sg->dma_length is always equal to sg->length on microblaze. So we don't need to set set dma_length, that is, microblaze can simply use sg->length. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-06-09microblaze: Define ARCH_SLAB_MINALIGN to fix slab crashMichal Simek1-0/+2
The commit "mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slab_def.h>" 1f0ce8b3dd667dca7 which moved the ARCH_SLAB_MINALIGN default into the global header broke FLAT for Microblaze. Error message: slab error in verify_redzone_free(): cache `idr_layer_cache': memory outside object was overwritten Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-06-08ARM: 6164/1: Add kto and kfrom to input operands list.Khem Raj4-8/+8
When functions incoming parameters are not in input operands list gcc 4.5 does not load the parameters into registers before calling this function but the inline assembly assumes valid addresses inside this function. This breaks the code because r0 and r1 are invalid when execution enters v4wb_copy_user_page () Also the constant needs to be used as third input operand so account for that as well. Tested on qemu arm. CC: <stable@kernel.org> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08Merge branch 'fix' of ↵Russell King145-1222/+2515
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-06-08ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6Anfei1-0/+3
Instruction faults on pre-ARMv6 CPUs are interpreted as a 'translation fault', but do_translation_fault doesn't handle well if user mode trying to run instruction above TASK_SIZE, and result in the infinite retry of that instruction. CC: <stable@kernel.org> Signed-off-by: Anfei Zhou <anfei.zhou@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debuggingNicolas Pitre1-1/+10
When CONFIG_DEBUG_HIGHMEM is used, the fixmap entry used for a highmem page by kmap_atomic() is always cleared by kunmap_atomic(). This helps find bad usages such as dereferences after the unmap, or overflow into the adjacent fixmap areas. But this debugging aid is completely bypassed when a kmap for the same page already exists as the kmap is reused instead. ON VIVT systems we have no choice but to reuse that kmap due to cache coherency issues, but on non VIVT systems we should always force the fixmap usage when debugging is active. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08ARM: 6152/1: ux500 make it possible to disable localtimersLinus Walleij1-1/+2
Currently compilation of ux500 fails if you deselect the kernel feature for localtimers. Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08[S390] Update default configuration.Martin Schwidefsky1-10/+13
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-08[S390] arch/s390/kvm: Use GFP_ATOMIC when a lock is heldJulia Lawall1-1/+1
The containing function is called from several places. At one of them, in the function __sigp_stop, the spin lock &fi->lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock(...) ... when != spin_unlock fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-08[S390] kprobes: add parameter check to module_free()Hendrik Brueckner1-2/+4
When unregistering kprobes, kprobes calls module_free() and always passes NULL for the mod parameter. Add a check to prevent NULL pointer dereferences. See commit 740a8de0796dd12890b3c8ddcfabfcb528b78d40 for more details. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-08[S390] appldata/extmem/kvm: add missing GFP_KERNEL flagHeiko Carstens3-11/+12
Add missing GFP flag to memory allocations. The part in cio only changes a comment. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-07msm: dma: add completion.h headerDaniel Walker1-0/+1
At some point this was exposed (not sure how), linux-2.6/arch/arm/mach-msm/dma.c:92: error: field 'complete' has incomplete type linux-2.6/arch/arm/mach-msm/dma.c: In function 'dmov_exec_cmdptr_complete_func': linux-2.6/arch/arm/mach-msm/dma.c:108: error: implicit declaration of function 'complete' linux-2.6/arch/arm/mach-msm/dma.c: In function 'msm_dmov_exec_cmd': linux-2.6/arch/arm/mach-msm/dma.c:120: error: implicit declaration of function 'init_completion' linux-2.6/arch/arm/mach-msm/dma.c:123: error: implicit declaration of function 'wait_for_completion' and the fix is just to add the header. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-08PM / x86: Save/restore MISC_ENABLE registerOndrej Zary3-0/+8
Save/restore MISC_ENABLE register on suspend/resume. This fixes OOPS (invalid opcode) on resume from STR on Asus P4P800-VM, which wakes up with MWAIT disabled. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15385 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-06-07powerpc/oprofile: fix potential buffer overrun in op_model_cell.cDenis Kirjanov1-1/+1
Fix potential initial_lfsr buffer overrun. Writing past the end of the buffer could happen when index == ENTRIES Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds23-59/+354
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Make intc messages consistent via pr_fmt. sh: make sure static declaration on ms7724se sh: make sure static declaration on mach-migor sh: make sure static declaration on mach-ecovec24 sh: make sure static declaration on mach-ap325rxa clocksource: sh_cmt: compute mult and shift before registration clocksource: sh_tmu: compute mult and shift before registration sh: PIO disabling for x3proto and urquell. sh: mach-sdk7786: conditionally disable PIO support. sh: support for platforms without PIO. usb: r8a66597-hcd pio to mmio accessor conversion. usb: gadget: r8a66597-udc pio to mmio accessor conversion. usb: gadget: m66592-udc pio to mmio accessor conversion. sh: add romImage MMCIF boot for sh7724 and Ecovec V2 sh: add boot code to MMCIF driver header sh: prepare MMCIF driver header file sh: allow romImage data between head.S and the zero page sh: Add support MMCIF for ecovec sh: remove duplicated #include input: serio: disable i8042 for non-cayman sh platforms. ...
2010-06-04Merge branch 'linux_next' of ↵Linus Torvalds3-17/+37
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (83 commits) i7core_edac: Better describe the supported devices Add support for Westmere to i7core_edac driver i7core_edac: don't free on success i7core_edac: Add support for X5670 Always call i7core_[ur]dimm_check_mc_ecc_err i7core_edac: fix memory leak of i7core_dev EDAC: add __init to i7core_xeon_pci_fixup i7core_edac: Fix wrong device id for channel 1 devices i7core: add support for Lynnfield alternate address i7core_edac: Add initial support for Lynnfield i7core_edac: do not export static functions edac: fix i7core build edac: i7core_edac produces undefined behaviour on 32bit i7core_edac: Use a more generic approach for probing PCI devices i7core_edac: PCI device is called NONCORE, instead of NOCORE i7core_edac: Fix ringbuffer maxsize i7core_edac: First store, then increment i7core_edac: Better parse "any" addrmask i7core_edac: Use a lockless ringbuffer edac: Create an unique instance for each kobj ...
2010-06-04arch/um: fix kunmap_atomic() call in skas/uaccess.cCesar Eduardo Barros1-1/+1
kunmap_atomic() takes a pointer to within the page, not the struct page. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04xtensa: invoke oom-killer from page faultNick Piggin1-10/+4
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04mn10300: invoke oom-killer from page faultNick Piggin1-5/+4
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04m32r: invoke oom-killer from page faultNick Piggin1-10/+4
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04frv: invoke oom-killer from page faultNick Piggin1-4/+4
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Howells <dhowells@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-03Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds5-23/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, smpboot: Fix cores per node printing on boot x86/amd-iommu: Fall back to GART if initialization fails x86/amd-iommu: Fix crash when request_mem_region fails x86/mm: Remove unused DBG() macro arch/x86/kernel: Add missing spin_unlock
2010-06-03Merge branch 'merge' of ↵Linus Torvalds3-17/+3
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/macio: Fix probing of macio devices by using the right of match table agp/uninorth: Fix oops caused by flushing too much powerpc/pasemi: Update MAINTAINERS file powerpc/cell: Fix integer constant warning powerpc/kprobes: Remove resume_execution() in kprobes powerpc/macio: Don't dereference pointer before null check
2010-06-03Merge branch 'for-linus/bugfixes' of ↵Linus Torvalds1-2/+2
git://xenbits.xensource.com/people/ianc/linux-2.6 * 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6: xen: avoid allocation causing potential swap activity on the resume path xen: ensure timer tick is resumed even on CPU driving the resume
2010-06-03Merge branch 'perf-fixes-for-linus-2' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix crash in swevents perf buildid-list: Fix --with-hits event processing perf scripts python: Give field dict to unhandled callback perf hist: fix objdump output parsing perf-record: Check correct pid when forking perf: Do the comm inheritance per thread in event__process_task perf: Use event__process_task from perf sched perf: Process comm events by tid blktrace: Fix new kernel-doc warnings perf_events: Fix unincremented buffer base on partial copy perf_events: Fix event scheduling issues introduced by transactional API perf_events, trace: Fix perf_trace_destroy(), mutex went missing perf_events, trace: Fix probe unregister race perf_events: Fix races in group composition perf_events: Fix races and clean up perf_event and perf_mmap_data interaction
2010-06-03xen: ensure timer tick is resumed even on CPU driving the resumeIan Campbell1-2/+2
The core suspend/resume code is run from stop_machine on CPU0 but parts of the suspend/resume machinery (including xen_arch_resume) are run on whichever CPU happened to schedule the xenwatch kernel thread. As part of the non-core resume code xen_arch_resume is called in order to restart the timer tick on non-boot processors. The boot processor itself is taken care of by core timekeeping code. xen_arch_resume uses smp_call_function which does not call the given function on the current processor. This means that we can end up with one CPU not receiving timer ticks if the xenwatch thread happened to be scheduled on CPU > 0. Use on_each_cpu instead of smp_call_function to ensure the timer tick is resumed everywhere. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Stable Kernel <stable@kernel.org> # .32.x
2010-06-02of/powerpc: fix fsl_msi device node pointerWolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02sh: make sure static declaration on ms7724seKuninori Morimoto1-4/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-migorKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-ecovec24Kuninori Morimoto1-8/+8
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-ap325rxaKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02powerpc/macio: Fix probing of macio devices by using the right of match tableBenjamin Herrenschmidt1-4/+0
Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02powerpc/cell: Fix integer constant warningDenis Kirjanov1-1/+1
Fix smatch warning: warning: constant 0x800000000 is so big it is long Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02powerpc/kprobes: Remove resume_execution() in kprobesAnanth N Mavinakayanahalli1-12/+2
emulate_step() in kprobe_handler() would've already determined if the probed instruction can be emulated. We single-step in hardware only if the instruction couldn't be emulated. resume_execution() therefore is superfluous -- all we need is to fix up the instruction pointer after single-stepping. Thanks to Paul Mackerras for catching this. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02of/powerpc: fix 85xx RapidIO device node pointerAlexandre Bounine1-1/+1
Fixes bug introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255 (of: Always use 'struct device.of_node' to get device node pointer) Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02x86, smpboot: Fix cores per node printing on bootBorislav Petkov1-1/+1
Percpu initialization happens now after booting the cores on the machine and this causes them all to be displayed as belonging to node 0: Jun 8 05:57:21 kepek kernel: [ 0.106999] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 Ok. Use early_cpu_to_node() to get the correct node of each core instead. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Mike Travis <travis@sgi.com> LKML-Reference: <20100601190455.GA14237@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 12:37:48 +0000