summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-12-13Merge tag 'x86-urgent-2020-12-13' of ↵Linus Torvalds7-24/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 and membarrier fixes: - Correct a few problems in the x86 and the generic membarrier implementation. Small corrections for assumptions about visibility which have turned out not to be true. - Make the PAT bits for memory encryption correct vs 4K and 2M/1G page table entries as they are at a different location. - Fix a concurrency issue in the the local bandwidth readout of resource control leading to incorrect values - Fix the ordering of allocating a vector for an interrupt. The order missed to respect the provided cpumask when the first attempt of allocating node local in the mask fails. It then tries the node instead of trying the full provided mask first. This leads to erroneous error messages and breaking the (user) supplied affinity request. Reorder it. - Make the INT3 padding detection in optprobe work correctly" * tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe to detect INT3 padding correctly x86/apic/vector: Fix ordering in vector assignment x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP membarrier: Execute SYNC_CORE on the calling thread membarrier: Explicitly sync remote cores when SYNC_CORE is requested membarrier: Add an actual barrier before rseq_preempt() x86/membarrier: Get rid of a dubious optimization
2020-12-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-16/+55
Pull kvm fixes from Paolo Bonzini: "Bugfixes for ARM, x86 and tools" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools/kvm_stat: Exempt time-based counters KVM: mmu: Fix SPTE encoding of MMIO generation upper half kvm: x86/mmu: Use cpuid to determine max gfn kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit() selftests: kvm/set_memory_region_test: Fix race in move region test KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort() KVM: arm64: Fix handling of merging tables into a block entry KVM: arm64: Fix memory leak on stage2 update of a valid PTE
2020-12-12Merge tag 'riscv-for-linus-5.10-rc8' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "Just one fix. It's nothing critical, just a randconfig that wasn't building. That said, it does seem pretty safe and is technically a regression so I'm sending it along for 5.10: - define get_cycles64() all the time, as it's used by most configurations" * tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Define get_cycles64() regardless of M-mode
2020-12-12x86/kprobes: Fix optprobe to detect INT3 padding correctlyMasami Hiramatsu1-2/+20
Commit 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") changed the padding bytes between functions from NOP to INT3. However, when optprobe decodes a target function it finds INT3 and gives up the jump optimization. Instead of giving up any INT3 detection, check whether the rest of the bytes to the end of the function are INT3. If all of them are INT3, those come from the linker. In that case, continue the optprobe jump optimization. [ bp: Massage commit message. ] Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") Reported-by: Adam Zabrocki <pi3@pi3.com.pl> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2
2020-12-11KVM: mmu: Fix SPTE encoding of MMIO generation upper halfMaciej S. Szmigiero2-9/+20
Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") cleaned up the computation of MMIO generation SPTE masks, however it introduced a bug how the upper part was encoded: SPTE bits 52-61 were supposed to contain bits 10-19 of the current generation number, however a missing shift encoded bits 1-10 there instead (mostly duplicating the lower part of the encoded generation number that then consisted of bits 1-9). In the meantime, the upper part was shrunk by one bit and moved by subsequent commits to become an upper half of the encoded generation number (bits 9-17 of bits 0-17 encoded in a SPTE). In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation") has changed the SPTE bit range assigned to encode the generation number and the total number of bits encoded but did not update them in the comment attached to their defines, nor in the KVM MMU doc. Let's do it here, too, since it is too trivial thing to warrant a separate commit. Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org [Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10RISC-V: Define get_cycles64() regardless of M-modePalmer Dabbelt1-2/+2
The timer driver uses get_cycles64() unconditionally to obtain the current time. A recent refactoring lost the common definition for some configs, which is now the only one we need. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-10Merge tag 'powerpc-5.10-6' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One commit to implement copy_from_kernel_nofault_allowed(), otherwise copy_from_kernel_nofault() can trigger warnings when accessing bad addresses in some configurations. Thanks to Christophe Leroy and Qian Cai" * tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
2020-12-10x86/apic/vector: Fix ordering in vector assignmentThomas Gleixner1-10/+14
Prarit reported that depending on the affinity setting the ' irq $N: Affinity broken due to vector space exhaustion.' message is showing up in dmesg, but the vector space on the CPUs in the affinity mask is definitely not exhausted. Shung-Hsi provided traces and analysis which pinpoints the problem: The ordering of trying to assign an interrupt vector in assign_irq_vector_any_locked() is simply wrong if the interrupt data has a valid node assigned. It does: 1) Try the intersection of affinity mask and node mask 2) Try the node mask 3) Try the full affinity mask 4) Try the full online mask Obviously #2 and #3 are in the wrong order as the requested affinity mask has to take precedence. In the observed cases #1 failed because the affinity mask did not contain CPUs from node 0. That made it allocate a vector from node 0, thereby breaking affinity and emitting the misleading message. Revert the order of #2 and #3 so the full affinity mask without the node intersection is tried before actually affinity is broken. If no node is assigned then only the full affinity mask and if that fails the full online mask is tried. Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor") Reported-by: Prarit Bhargava <prarit@redhat.com> Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87ft4djtyp.fsf@nanos.tec.linutronix.de
2020-12-10x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabledXiaochen Shen1-4/+2
The MBA software controller (mba_sc) is a feedback loop which periodically reads MBM counters and tries to restrict the bandwidth below a user-specified value. It tags along the MBM counter overflow handler to do the updates with 1s interval in mbm_update() and update_mba_bw(). The purpose of mbm_update() is to periodically read the MBM counters to make sure that the hardware counter doesn't wrap around more than once between user samplings. mbm_update() calls __mon_event_count() for local bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count() instead when mba_sc is enabled. __mon_event_count() will not be called for local bandwidth updating in MBM counter overflow handler, but it is still called when reading MBM local bandwidth counter file 'mbm_local_bytes', the call path is as below: rdtgroup_mondata_show() mon_event_read() mon_event_count() __mon_event_count() In __mon_event_count(), m->chunks is updated by delta chunks which is calculated from previous MSR value (m->prev_msr) and current MSR value. When mba_sc is enabled, m->chunks is also updated in mbm_update() by mistake by the delta chunks which is calculated from m->prev_bw_msr instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in the mba_sc feedback loop. When reading MBM local bandwidth counter file, m->chunks was changed unexpectedly by mbm_bw_count(). As a result, the incorrect local bandwidth counter which calculated from incorrect m->chunks is shown to the user. Fix this by removing incorrect m->chunks updating in mbm_bw_count() in MBM counter overflow handler, and always calling __mon_event_count() in mbm_update() to make sure that the hardware local bandwidth counter doesn't wrap around. Test steps: # Run workload with aggressive memory bandwidth (e.g., 10 GB/s) git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat && make ./tools/membw/membw -c 0 -b 10000 --read # Enable MBA software controller mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl # Create control group c1 mkdir /sys/fs/resctrl/c1 # Set MB throttle to 6 GB/s echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata # Write PID of the workload to tasks file echo `pidof membw` > /sys/fs/resctrl/c1/tasks # Read local bytes counters twice with 1s interval, the calculated # local bandwidth is not as expected (approaching to 6 GB/s): local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` sleep 1 local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` echo "local b/w (bytes/s):" `expr $local_2 - $local_1` Before fix: local b/w (bytes/s): 11076796416 After fix: local b/w (bytes/s): 5465014272 Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop) Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com
2020-12-10Merge tag 'kvmarm-fixes-5.10-5' of ↵Paolo Bonzini4-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD kvm/arm64 fixes for 5.10, take #5 - Don't leak page tables on PTE update - Correctly invalidate TLBs on table to block transition - Only update permissions if the fault level matches the expected mapping size
2020-12-10x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WPArvind Sankar2-2/+3
The PAT bit is in different locations for 4k and 2M/1G page table entries. Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages, and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT index for write-protected pages. Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu
2020-12-09Merge tag 'arm-soc-fixes-v5.10-4b' of ↵Linus Torvalds14-22/+18
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a few more PHY mode changes for allwinner SoC based boards with a Realtek PHY after the driver changed its behavior, I assume there will be more of these in the future. Also on for Allwinner, the Banana Pi M2 board had a regression that led to some devices not working because of a slightly incorrect voltage being applied. By popular demand, I picked up a change from Krzysztof Kozlowski to actually list the SoC tree in the MAINTAINERS file. We don't want to get Cc'd on normal patches that are picked up by platform maintainers, but the lack of an entry has led to confusion in the past. All the other changes are fairly benign, fixing boot-time or compile-time warning messages in various places: - A dtc warning on the OLPC XO-1.75 - A boot-time warning on i.MX6 wandboard - A harmless compile-time warning - A regression causing one of the i.MX6 SoCs to be identified as another - Missing SoC identification of Allwinner V3 and S3" * tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firmware: xilinx: Mark pm_api_features_map with static keyword ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs MAINTAINERS: add a limited ARM and ARM64 SoC entry MAINTAINERS: correct SoC Git address (formerly: arm-soc) ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITS arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet
2020-12-09ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei1-2/+1
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09x86/membarrier: Get rid of a dubious optimizationAndy Lutomirski2-6/+13
sync_core_before_usermode() had an incorrect optimization. If the kernel returns from an interrupt, it can get to usermode without IRET. It just has to schedule to a different task in the same mm and do SYSRET. Fortunately, there were no callers of sync_core_before_usermode() that could have had in_irq() or in_nmi() equal to true, because it's only ever called from the scheduler. While at it, clarify a related comment. Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5afc7632be1422f91eaf7611aaaa1b5b8580a086.1607058304.git.luto@kernel.org
2020-12-09Merge tag 'sunxi-fixes-for-5.10-3' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull sparc64 csum fix from Al Viro: "Fix for a brown paperbag regression in sparc64" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes
2020-12-08[regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changesAl Viro1-1/+1
~0U is -1, not 1 Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Fixes: fdf8bee96f9a "sparc64: propagate the calling convention changes down to __csum_partial_copy_...()" X-brown-paperbag: yes Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-12-08powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()Christophe Leroy2-1/+10
Since commit c33165253492 ("powerpc: use non-set_fs based maccess routines"), userspace access is not granted anymore when using copy_from_kernel_nofault() However, kthread_probe_data() uses copy_from_kernel_nofault() to check validity of pointers. When the pointer is NULL, it points to userspace, leading to a KUAP fault and triggering the following big hammer warning many times when you request a sysrq "show task": [ 1117.202054] ------------[ cut here ]------------ [ 1117.202102] Bug: fault blocked by AP register ! [ 1117.202261] WARNING: CPU: 0 PID: 377 at arch/powerpc/include/asm/nohash/32/kup-8xx.h:66 do_page_fault+0x4a8/0x5ec [ 1117.202310] Modules linked in: [ 1117.202428] CPU: 0 PID: 377 Comm: sh Tainted: G W 5.10.0-rc5-01340-g83f53be2de31-dirty #4175 [ 1117.202499] NIP: c0012048 LR: c0012048 CTR: 00000000 [ 1117.202573] REGS: cacdbb88 TRAP: 0700 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.202625] MSR: 00021032 <ME,IR,DR,RI> CR: 24082222 XER: 20000000 [ 1117.202899] [ 1117.202899] GPR00: c0012048 cacdbc40 c2929290 00000023 c092e554 00000001 c09865e8 c092e640 [ 1117.202899] GPR08: 00001032 00000000 00000000 00014efc 28082224 100d166a 100a0920 00000000 [ 1117.202899] GPR16: 100cac0c 100b0000 1080c3fc 1080d685 100d0000 100d0000 00000000 100a0900 [ 1117.202899] GPR24: 100d0000 c07892ec 00000000 c0921510 c21f4440 0000005c c0000000 cacdbc80 [ 1117.204362] NIP [c0012048] do_page_fault+0x4a8/0x5ec [ 1117.204461] LR [c0012048] do_page_fault+0x4a8/0x5ec [ 1117.204509] Call Trace: [ 1117.204609] [cacdbc40] [c0012048] do_page_fault+0x4a8/0x5ec (unreliable) [ 1117.204771] [cacdbc70] [c00112f0] handle_page_fault+0x8/0x34 [ 1117.204911] --- interrupt: 301 at copy_from_kernel_nofault+0x70/0x1c0 [ 1117.204979] NIP: c010dbec LR: c010dbac CTR: 00000001 [ 1117.205053] REGS: cacdbc80 TRAP: 0301 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.205104] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28082224 XER: 00000000 [ 1117.205416] DAR: 0000005c DSISR: c0000000 [ 1117.205416] GPR00: c0045948 cacdbd38 c2929290 00000001 00000017 00000017 00000027 0000000f [ 1117.205416] GPR08: c09926ec 00000000 00000000 3ffff000 24082224 [ 1117.206106] NIP [c010dbec] copy_from_kernel_nofault+0x70/0x1c0 [ 1117.206202] LR [c010dbac] copy_from_kernel_nofault+0x30/0x1c0 [ 1117.206258] --- interrupt: 301 [ 1117.206372] [cacdbd38] [c004bbb0] kthread_probe_data+0x44/0x70 (unreliable) [ 1117.206561] [cacdbd58] [c0045948] print_worker_info+0xe0/0x194 [ 1117.206717] [cacdbdb8] [c00548ac] sched_show_task+0x134/0x168 [ 1117.206851] [cacdbdd8] [c005a268] show_state_filter+0x70/0x100 [ 1117.206989] [cacdbe08] [c039baa0] sysrq_handle_showstate+0x14/0x24 [ 1117.207122] [cacdbe18] [c039bf18] __handle_sysrq+0xac/0x1d0 [ 1117.207257] [cacdbe48] [c039c0c0] write_sysrq_trigger+0x4c/0x74 [ 1117.207407] [cacdbe68] [c01fba48] proc_reg_write+0xb4/0x114 [ 1117.207550] [cacdbe88] [c0179968] vfs_write+0x12c/0x478 [ 1117.207686] [cacdbf08] [c0179e60] ksys_write+0x78/0x128 [ 1117.207826] [cacdbf38] [c00110d0] ret_from_syscall+0x0/0x34 [ 1117.207938] --- interrupt: c01 at 0xfd4e784 [ 1117.208008] NIP: 0fd4e784 LR: 0fe0f244 CTR: 10048d38 [ 1117.208083] REGS: cacdbf48 TRAP: 0c01 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.208134] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 44002222 XER: 00000000 [ 1117.208470] [ 1117.208470] GPR00: 00000004 7fc34090 77bfb4e0 00000001 1080fa40 00000002 7400000f fefefeff [ 1117.208470] GPR08: 7f7f7f7f 10048d38 1080c414 7fc343c0 00000000 [ 1117.209104] NIP [0fd4e784] 0xfd4e784 [ 1117.209180] LR [0fe0f244] 0xfe0f244 [ 1117.209236] --- interrupt: c01 [ 1117.209274] Instruction dump: [ 1117.209353] 714a4000 418200f0 73ca0001 40820084 73ca0032 408200f8 73c90040 4082ff60 [ 1117.209727] 0fe00000 3c60c082 386399f4 48013b65 <0fe00000> 80010034 3860000b 7c0803a6 [ 1117.210102] ---[ end trace 1927c0323393af3e ]--- To avoid that, copy_from_kernel_nofault_allowed() is used to check whether the address is a valid kernel address. But the default version of it returns true for any address. Provide a powerpc version of copy_from_kernel_nofault_allowed() that returns false when the address is below TASK_USER_MAX, so that copy_from_kernel_nofault() will return -ERANGE. Fixes: c33165253492 ("powerpc: use non-set_fs based maccess routines") Reported-by: Qian Cai <qcai@redhat.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/18bcb456d32a3e74f5ae241fd6f1580c092d07f5.1607360230.git.christophe.leroy@csgroup.eu
2020-12-07ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITSArnd Bergmann1-3/+0
These definitions are evidently left over from the days when sparsemem settings were platform specific. This was no longer the case when the platform got merged. There was no warning in the past, but now the asm/sparsemem.h header ends up being included indirectly, causing this warning: In file included from /git/arm-soc/arch/arm/mach-keystone/keystone.c:24: arch/arm/mach-keystone/memory.h:10:9: warning: 'SECTION_SIZE_BITS' macro redefined [-Wmacro-redefined] #define SECTION_SIZE_BITS 34 ^ arch/arm/include/asm/sparsemem.h:23:9: note: previous definition is here #define SECTION_SIZE_BITS 28 ^ Clearly the definitions never had any effect here, so remove them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201203231847.1484900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'imx-fixes-5.10-5' of ↵Arnd Bergmann3-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 5: - Fix a regression on SoC revision detection with ANATOP, that is introduced by commit 4a4fb66119eb ("ARM: imx: Add missing of_node_put()"). - Drop PAD_GPIO_6 from imx6qdl-wandboard ENET pin group, as the pin is used by camera sensor now. - Fix I2C3_SCL pinmux on imx6qdl-kontron-samx6i board, so that SoM EEPROM can be accessed. * tag 'imx-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address Link: https://lore.kernel.org/r/20201201091820.GW4072@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'sunxi-fixes-for-5.10-2' of ↵Arnd Bergmann7-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-06Merge tag 'usb-5.10-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.10-rc7 that resolve a number of reported issues, and add some new device ids. Nothing major here, but these solve some problems that people were having with the 5.10-rc tree: - reverts for USB storage dma settings that broke working devices - thunderbolt use-after-free fix - cdns3 driver fixes - gadget driver userspace copy fix - new device ids All of these except for the reverts have been in linux-next with no reported issues. The reverts are "clean" and were tested by Hans, as well as passing the 0-day tests" * tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Use local copy of descriptors for userspace copy usb: ohci-omap: Fix descriptor conversion Revert "usb-storage: fix sdev->host->dma_dev" Revert "uas: fix sdev->host->dma_dev" Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives" USB: serial: kl5kusb105: fix memleak on open USB: serial: ch341: sort device-id entries USB: serial: ch341: add new Product ID for CH341A USB: serial: option: fix Quectel BG96 matching usb: cdns3: core: fix goto label for error path usb: cdns3: gadget: clear trb->length as zero after preparing every trb usb: cdns3: Fix hardware based role switch USB: serial: option: add support for Thales Cinterion EXS82 USB: serial: option: add Fibocom NL668 variants thunderbolt: Fix use-after-free in remove_unplugged_switch()
2020-12-06Merge tag 'x86-urgent-2020-12-06' of ↵Linus Torvalds8-15/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make the AMD L3 QoS code and data priorization enable/disable mechanism work correctly. The control bit was only set/cleared on one of the CPUs in a L3 domain, but it has to be modified on all CPUs in the domain. The initial documentation was not clear about this, but the updated one from Oct 2020 spells it out. - Fix an off by one in the UV platform detection code which causes the UV hubs to be identified wrongly. The chip revisions start at 1 not at 0. - Fix a long standing bug in the evaluation of prefixes in the uprobes code which fails to handle repeated prefixes properly. The aggregate size of the prefixes can be larger than the bytes array but the code blindly iterated over the aggregate size beyond the array boundary. Add a macro to handle this case properly and use it at the affected places" * tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes x86/platform/uv: Fix UV4 hub revision adjustment x86/resctrl: Fix AMD L3 QOS CDP enable/disable
2020-12-06Merge tag 'perf-urgent-2020-12-06' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two fixes for performance monitoring on X86: - Add recursion protection to another callchain invoked from x86_pmu_stop() which can recurse back into x86_pmu_stop(). The first attempt to fix this missed this extra code path. - Use the already filtered status variable to check for PEBS counter overflow bits and not the unfiltered full status read from IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which would be evaluated incorrectly" * tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Check PEBS status correctly perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS
2020-12-06Merge tag 'irq-urgent-2020-12-06' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of updates for the interrupt subsystem: - Make multiqueue devices which use the managed interrupt affinity infrastructure work on PowerPC/Pseries. PowerPC does not use the generic infrastructure for setting up PCI/MSI interrupts and the multiqueue changes failed to update the legacy PCI/MSI infrastructure. Make this work by passing the affinity setup information down to the mapping and allocation functions. - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing and he's not reachable. We hope all is well with him and say thanks for his work over the years" * tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc/pseries: Pass MSI affinity to irq_create_mapping() genirq/irqdomain: Add an irq_create_mapping_affinity() function MAINTAINERS: Move Jason Cooper to CREDITS
2020-12-06Merge tag 'kbuild-fixes-v5.10-2' of ↵Linus Torvalds11-14/+19
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
2020-12-06mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPINGMinchan Kim1-1/+0
While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org Fixes: e47110e90584 ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Harish Sriram <harish@linux.ibm.com> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytesMasami Hiramatsu1-3/+2
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be: insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Use the new for_each_insn_prefix() macro which does it correctly. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message. ] Fixes: 25189d08e516 ("x86/sev-es: Add support for handling IOIO exceptions") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/160697106089.3146288.2052422845039649176.stgit@devnote2
2020-12-06x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytesMasami Hiramatsu1-5/+5
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Use the new for_each_insn_prefix() macro which does it correctly. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message. ] Fixes: 32d0b95300db ("x86/insn-eval: Add utility functions to get segment selector") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697104969.3146288.16329307586428270032.stgit@devnote2
2020-12-06x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytesMasami Hiramatsu2-4/+21
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
2020-12-05Merge tag 'powerpc-5.10-5' of ↵Linus Torvalds9-17/+65
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.10: - Three commits fixing possible missed TLB invalidations for multi-threaded processes when CPUs are hotplugged in and out. - A fix for a host crash triggerable by host userspace (qemu) in KVM on Power9. - A fix for a host crash in machine check handling when running HPT guests on a HPT host. - One commit fixing potential missed TLB invalidations when using the hash MMU on Power9 or later. - A regression fix for machines with CPUs on node 0 but no memory. Thanks to Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan Mohanty, Milton Miller, Nicholas Piggin, Paul Mackerras, and Srikar Dronamraju" * tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check powerpc/numa: Fix a regression on memoryless node 0 powerpc/64s: Trim offlined CPUs from mm_cpumasks kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling powerpc/64s/pseries: Fix hash tlbiel_all_isa300 for guest kernels powerpc/64s: Fix hash ISA v3.0 TLBIEL instruction generation
2020-12-04usb: ohci-omap: Fix descriptor conversionLinus Walleij1-1/+1
There were a bunch of issues with the patch converting the OMAP1 OSK board to use descriptors for controlling the USB host: - The chip label was incorrect - The GPIO offset was off-by-one - The code should use sleeping accessors This patch tries to fix all issues at the same time. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 15d157e87443 ("usb: ohci-omap: Convert to use GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201130083033.29435-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04kvm: x86/mmu: Use cpuid to determine max gfnRick Edgecombe1-2/+2
In the TDP MMU, use shadow_phys_bits to dermine the maximum possible GFN mapped in the guest for zapping operations. boot_cpu_data.x86_phys_bits may be reduced in the case of HW features that steal HPA bits for other purposes. However, this doesn't necessarily reduce GPA space that can be accessed via TDP. So zap based on a maximum gfn calculated with MAXPHYADDR retrieved from CPUID. This is already stored in shadow_phys_bits, so use it instead of x86_phys_bits. Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Message-Id: <20201203231120.27307-1-rick.p.edgecombe@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-04kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()Jacob Xu1-2/+2
The cpu arg for svm_cpu_uninit() was previously ignored resulting in the per cpu structure svm_cpu_data not being de-allocated for all cpus. Signed-off-by: Jacob Xu <jacobhxu@google.com> Message-Id: <20201203205939.1783969-1-jacobhxu@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-03Merge tag 's390-5.10-6' of ↵Linus Torvalds3-21/+13
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: "One commit is fixing lockdep irq state tracing which broke with -rc6. The other one fixes logical vs physical CPU address mixup in our PCI code. Summary: - fix lockdep irq state tracing - fix logical vs physical CPU address confusion in PCI code" * tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix irq state tracing s390/pci: fix CPU address in MSI for directed IRQ
2020-12-03x86/platform/uv: Fix UV4 hub revision adjustmentMike Travis1-1/+1
Currently, UV4 is incorrectly identified as UV4A and UV4A as UV5. Hub chip starts with revision 1, fix it. [ bp: Massage commit message. ] Fixes: 647128f1536e ("x86/platform/uv: Update UV MMRs for UV5") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Dimitri Sivanich <dimitri.sivanich@hpe.com> Link: https://lkml.kernel.org/r/20201203152252.371199-1-mike.travis@hpe.com
2020-12-03perf/x86/intel: Check PEBS status correctlyStephane Eranian1-1/+1
The kernel cannot disambiguate when 2+ PEBS counters overflow at the same time. This is what the comment for this code suggests. However, I see the comparison is done with the unfiltered p->status which is a copy of IA32_PERF_GLOBAL_STATUS at the time of the sample. This register contains more than the PEBS counter overflow bits. It also includes many other bits which could also be set. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201126110922.317681-2-namhyung@kernel.org
2020-12-03perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBSNamhyung Kim1-1/+1
The commit 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler") introduced this. It seems x86_pmu_stop can be called recursively (like when it losts some samples) like below: x86_pmu_stop intel_pmu_disable_event (x86_pmu_disable) intel_pmu_pebs_disable intel_pmu_drain_pebs_nhm (x86_pmu_drain_pebs_buffer) x86_pmu_stop While commit 35d1ce6bec13 ("perf/x86/intel/ds: Fix x86_pmu_stop warning for large PEBS") fixed it for the normal cases, there's another path to call x86_pmu_stop() recursively when a PEBS error was detected (like two or more counters overflowed at the same time). Like in the Kan's previous fix, we can skip the interrupt accounting for large PEBS, so check the iregs which is set for PMI only. Fixes: 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Reported-by: John Sperbeck <jsperbeck@google.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201126110922.317681-1-namhyung@kernel.org
2020-12-02Merge tag 'arm64-fixes' of ↵Linus Torvalds12-181/+243
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I'm sad to say that we've got an unusually large arm64 fixes pull for rc7 which addresses numerous significant instrumentation issues with our entry code. Without these patches, lockdep is hopelessly unreliable in some configurations [1,2] and syzkaller is therefore not a lot of use because it's so noisy. Although much of this has always been broken, it appears to have been exposed more readily by other changes such as 044d0d6de9f5 ("lockdep: Only trace IRQ edges") and general lockdep improvements around IRQ tracing and NMIs. Fixing this properly required moving much of the instrumentation hooks from our entry assembly into C, which Mark has been working on for the last few weeks. We're not quite ready to move to the recently added generic functions yet, but the code here has been deliberately written to mimic that closely so we can look at cleaning things up once we have a bit more breathing room. Having said all that, the second version of these patches was posted last week and I pushed it into our CI (kernelci and cki) along with a commit which forced on PROVE_LOCKING, NOHZ_FULL and CONTEXT_TRACKING_FORCE. The result? We found a real bug in the md/raid10 code [3]. Oh, and there's also a really silly typo patch that's unrelated. Summary: - Fix numerous issues with instrumentation and exception entry - Fix hideous typo in unused register field definition" [1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com [2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com [3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions
2020-12-02s390: fix irq state tracingHeiko Carstens2-18/+2
With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") common code calls arch_cpu_idle() with a lockdep state that tells irqs are on. This doesn't work very well for s390: psw_idle() will enable interrupts to wait for an interrupt. As soon as an interrupt occurs the interrupt handler will verify if the old context was psw_idle(). If that is the case the interrupt enablement bits in the old program status word will be cleared. A subsequent test in both the external as well as the io interrupt handler checks if in the old context interrupts were enabled. Due to the above patching of the old program status word it is assumed the old context had interrupts disabled, and therefore a call to TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in turn makes lockdep incorrectly "think" that interrupts are enabled within the interrupt handler. Fix this by unconditionally calling TRACE_IRQS_OFF when entering interrupt handlers. Also call unconditionally TRACE_IRQS_ON when leaving interrupts handlers. This leaves the special psw_idle() case, which now returns with interrupts disabled, but has an "irqs on" lockdep state. So callers of psw_idle() must adjust the state on their own, if required. This is currently only __udelay_disabled(). Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/pci: fix CPU address in MSI for directed IRQAlexander Gordeev1-3/+11
The directed MSIs are delivered to CPUs whose address is written to the MSI message address. The current code assumes that a CPU logical number (as it is seen by the kernel) is also the CPU address. The above assumption is not correct, as the CPU address is rather the value returned by STAP instruction. That value does not necessarily match the kernel logical CPU number. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCENicholas Piggin1-2/+7
This can be hit by an HPT guest running on an HPT host and bring down the host, so it's quite important to fix. Fixes: 7290f3b3d3e6 ("powerpc/64s/powernv: machine check dump SLB contents") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201128070728.825934-2-npiggin@gmail.com
2020-12-02KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()Yanan Wang3-2/+15
If we get a FSC_PERM fault, just using (logging_active && writable) to determine calling kvm_pgtable_stage2_map(). There will be two more cases we should consider. (1) After logging_active is configged back to false from true. When we get a FSC_PERM fault with write_fault and adjustment of hugepage is needed, we should merge tables back to a block entry. This case is ignored by still calling kvm_pgtable_stage2_relax_perms(), which will lead to an endless loop and guest panic due to soft lockup. (2) We use (FSC_PERM && logging_active && writable) to determine collapsing a block entry into a table by calling kvm_pgtable_stage2_map(). But sometimes we may only need to relax permissions when trying to write to a page other than a block. In this condition,using kvm_pgtable_stage2_relax_perms() will be fine. The ISS filed bit[1:0] in ESR_EL2 regesiter indicates the stage2 lookup level at which a D-abort or I-abort occurred. By comparing granule of the fault lookup level with vma_pagesize, we can strictly distinguish conditions of calling kvm_pgtable_stage2_relax_perms() or kvm_pgtable_stage2_map(), and the above two cases will be well considered. Suggested-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201201201034.116760-4-wangyanan55@huawei.com
2020-12-02KVM: arm64: Fix handling of merging tables into a block entryYanan Wang1-1/+7
When dirty logging is enabled, we collapse block entries into tables as necessary. If dirty logging gets canceled, we can end-up merging tables back into block entries. When this happens, we must not only free the non-huge page-table pages but also invalidate all the TLB entries that can potentially cover the block. Otherwise, we end-up with multiple possible translations for the same physical page, which can legitimately result in a TLB conflict. To address this, replease the bogus invalidation by IPA with a full VM invalidation. Although this is pretty heavy handed, it happens very infrequently and saves a bunch of invalidations by IPA. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> [maz: fixup commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201201201034.116760-3-wangyanan55@huawei.com
2020-12-02KVM: arm64: Fix memory leak on stage2 update of a valid PTEYanan Wang1-0/+9
When installing a new leaf PTE onto an invalid ptep, we need to get_page(ptep) to account for the new mapping. However, simply updating a valid PTE shouldn't result in any additional refcounting, as there is new mapping. This otherwise results in a page being forever wasted. Address this by fixing-up the refcount in stage2_map_walker_try_leaf() if the PTE was already valid, balancing out the later get_page() in stage2_map_walk_leaf(). Signed-off-by: Yanan Wang <wangyanan55@huawei.com> [maz: update commit message, add comment in the code] Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201201201034.116760-2-wangyanan55@huawei.com
2020-12-01x86/resctrl: Fix AMD L3 QOS CDP enable/disableBabu Moger3-2/+14
When the AMD QoS feature CDP (code and data prioritization) is enabled or disabled, the CDP bit in MSR 0000_0C81 is written on one of the CPUs in an L3 domain (core complex). That is not correct - the CDP bit needs to be updated on all the logical CPUs in the domain. This was not spelled out clearly in the spec earlier. The specification has been updated and the updated document, "AMD64 Technology Platform Quality of Service Extensions Publication # 56375 Revision: 1.02 Issue Date: October 2020" is available now. Refer the section: Code and Data Prioritization. Fix the issue by adding a new flag arch_has_per_cpu_cfg in rdt_cache data structure. The documentation can be obtained at: https://developer.amd.com/wp-content/resources/56375.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [ bp: Massage commit message. ] Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/160675180380.15628.3309402017215002347.stgit@bmoger-ubuntu
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor11-14/+19
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity checkGreg Kurz1-5/+2
Commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") updated kvmppc_xive_vcpu_id_valid() in a way that allows userspace to trigger an assertion in skiboot and crash the host: [ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0 [ 696.186314757,0] Assert fail: hw/xive.c:2370:0 [ 696.186342458,0] Aborting! xive-kvCPU 0043 Backtrace: S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48 S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34 S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0 S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124 S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134 --- OPAL call token: 0x8a caller R1: 0xc000001f28563850 --- XIVE maintains the interrupt context state of non-dispatched vCPUs in an internal VP structure. We allocate a bunch of those on startup to accommodate all possible vCPUs. Each VP has an id, that we derive from the vCPU id for efficiency: static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server) { return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server); } The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was limitting the number of concurrent VMs because the VP space is limited on the HW. Since most of the time, VMs run with a lot less vCPUs, commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") gave the possibility for userspace to tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS attribute. The check in kvmppc_pack_vcpu_id() was changed from cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode to cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode The previous check was based on the fact that the VP block had KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the size of the VP block, but kvmppc_pack_vcpu_id() has nothing to do with it and it certainly doesn't ensure that the packed vCPU ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might thus return true when the VM was configured with a non-standard VSMT mode, even if the packed vCPU id is higher than what we expect. We end up using an unallocated VP id, which confuses OPAL. The assert in OPAL is probably abusive and should be converted to a regular error that the kernel can handle, but we shouldn't really use broken VP ids in the first place. Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed vCPU id is below xive->nr_servers, which is explicitly what we want. Fixes: 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/160673876747.695514.1809676603724514920.stgit@bahia.lan
2020-12-01arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-idHeinrich Schuchardt1-1/+1
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") network is broken on the NanoPi Neo Plus2. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201129194512.1475586-1-xypron.glpk@gmx.de
2020-12-01arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-idHeinrich Schuchardt1-1/+1
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") iSCSI booting fails on the Pine A64 LTS. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201129162627.1244808-1-xypron.glpk@gmx.de