summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2007-02-18[ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 portsLennert Buytenhek1-0/+14
On the n2100, both onboard r8169 ports exhibit PCI parity problems. Set the ->broken_parity_status flag for both ports so that the r8169 drivers knows it should ignore error interrupts. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale treesRussell King149-5550/+10678
2007-02-17[ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PMBen Dooks1-1/+0
S3C2443_PM is not defined in our Kconfig, so remove the reference from CPU_S3C2443 to stop the configuration process warning about it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4221/1: S3C2443: DMA supportBen Dooks3-0/+188
Add initialisation and mappings for S3C2443 DMA system Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4220/1: S3C24XX: DMA system initialised from sysdevBen Dooks4-30/+62
This patch gets the DMA system for the S3C24XX ready for the S3C2443, which requires 6 dma channels at a different stride, and different base IRQ. The DMA system is now initialised from the same drivers which apply the DMA mappings, as well as removing the DMA sysdev intialisation out of the main init code (which is now being called from a sysdev probe, so cannot add a new sysdev) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443Ben Dooks1-1/+1
Update the Kconfig of arch/arm/mach-s3c2443 to add the CONFIG_CPU_S3C2443 to the list of config variabls which mean CONFIG_CPU_S3C2412_ONLY cannot be set Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4217/1: S3C24XX: remove the dma channel show at startupBen Dooks1-14/+0
Remove the DMA code's channel printing at startup as this is firstly a waste of console output on initialsaion, and secondly is going to be obsolete once the S3C2443 DMA code has been merged Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4216/1: add .gitignore entries for ARM specific filesNicolas Pitre2-0/+3
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4214/2: S3C2410: Add Armzone QT2410Ben Dooks3-0/+454
Patch from: Harald Welte <laforge@openmoko.org> Add support for the Armzone QT2410 system, with basic peripheral support for TFT display, SPI and LEDs. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Ben Dooks <ben-linux@fluf.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4098/1: ARM: rtc_lock only used with rtc_cmosDavid Brownell1-1/+3
Fix build glitches on ARM ... the only user of "rtc_lock" today is the optional PC-style "CMOS" RTC driver, the legacy SA1100 RTC driver is not even in the tree any more. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4137/1: Add kexec supportRichard Purdie5-0/+168
Add kexec support to ARM. Improvements like commandline handling could be made but this patch gives basic functional support. It uses the next available syscall number, 347. Once the syscall number is known, userspace support will be finalised/submitted to kexec-tools, various patches already exist. Originally based on a patch by Maxim Syrchin but updated and forward ported by various people. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4201/1: SMP barriers pair needed for the secondary boot processCatalin Marinas1-0/+2
In some situations, the pen_release store in platform_secondary_init() may stay forever in the write buffer while the CPU is waiting on the boot_lock to be released in boot_secondary(). The primary CPU could never see the pen_release update without the barriers. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] at91: correct value for AT91_RSTC_KEYJan Altenberg2-2/+2
- Remove a duplicated define for AT91_RSTC_KEY - Set AT91_RSTC_KEY to the correct value - Replace the hardcoded keys in at91sam9620.c and at91sam9261.c by AT91_RSTC_KEY Signed-off-by: Jan Altenberg <jan@linutronix.de> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4207/1: defconfig fixes, use RTC_DRV_AT91RM9200David Brownell3-3/+3
When "rtc-at91" was renamed to "rtc-at91rm9200" not all the relevant defconfig entries were updated. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4191/1: Remove redundant __flush_dcache_page() function prototypeGeorge G. Davis1-2/+0
Commit 1c9d3df5e88ad7db23f5b22f4341c39722a904a4 added function prototype __flush_dcache_page() in include/asm-arm/cacheflush.h. So we can remove the prototype for same in arch/arm/mm/fault-armv.c since it is now redundant to have it there. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4202/2: S3C2443: IRQ sub source handlersBen Dooks1-39/+199
Add IRQ handlers for the IRQs which originate from the sub-interrupt register on the S3C2443 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4209/1: S3C24XX: remove unnecessary includes of iomd.hBen Dooks6-8/+0
Machines in the S3C24XX architectures should not be including <asm/hardware/iomd.h> as this is not needed. Also remove commented out includes Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4206/1: SMDK2440: Fix lcd type in platform dataBen Dooks1-0/+1
Set the LCD display type field in the platform data so that the LCD driver initialise the display as an TFT display Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4205/1: S3C2443: Add cpu specific reset hookBen Dooks1-1/+9
Hook in a cpu specific reset function for the S3C2443 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4203/1: S3C2443: use S3C2412 nand driverBen Dooks1-0/+2
Use the S3C2412 nand driver for the S3C2443 as it is register compatible. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4200/1: S3C2443: Update s3c2410_defconfig to add SMDK2443Ben Dooks1-1/+7
Add SMDK2443 to s3c2410_defconfig Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4199/1: S3C2443: SMDK2443 machine additionBen Dooks3-1/+147
Add support for SMDK2443 to arch/arm/mach-s3c2443 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4198/2: S3C2443: arch/arm/mach-s3c2443 and related supportBen Dooks9-2/+1273
Add arch/arm/mach-s3c2443 for support of the Samsung S3C2443 SoC This patch adds the core CPU support, clock framework, times and initial IRQ support, as well as adding the directory into the build tree. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4192/1: AT91: Support for AT91SAM9XE processors.Andrew Victor2-6/+53
Add support for the Atmel AT91SAM9XE range of processors. These are basically AT91SAM9260's with different amounts of internal SRAM and Flash. We make use of the existing AT91SAM9260 support, but just perform run-time detection of the size of the internal SRAM. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4130/1: Add L220 support to RealView/EBCatalin Marinas2-0/+12
This patch enables the L220 on the RealView/EB MPCore platform. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15Merge Realview GIC codeRussell King5-22/+134
2007-02-15[ARM] 4109/2: Add support for the RealView/EB MPCore revC platformCatalin Marinas3-5/+17
The kernel originally supported revB only. This patch enables revC by default and adds a config option for building the kernel for the revB platform. Since the SCU base address was hard-coded in the proc-v6.S file (and only valid for RealView/EB revB), this patch also adds a more generic support for defining the SCU information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4190/2: Add the secondary GIC support for the RealView/EBCatalin Marinas1-0/+19
MPCore platform This patch adds the registration of the secondary GIC on the baseboard, together with the IRQ chaining setup. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4108/2: Allow multiple GIC interrupt controllers in a systemCatalin Marinas3-17/+98
The current implementation only assumes one GIC to be present in the system. However, there are platforms with more than one cascaded interrupt controllers (RealView/EB MPCore for example). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4189/1: AT91: MACB Ethernet clockAndrew Victor2-6/+6
The MACB Ethernet driver searches for a "macb_clk" clock, so rename the "ether_clk" on the SAM9260 and SAM9263 to "macb_clk". Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4188/1: S3C24XX: add CRAMFS to s3c2410_defconfigBen Dooks1-2/+2
Add cramfs support in by default, as a lot of our initrds are cramfs images. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4179/1: S3C2440: DMA ordering listBen Dooks1-0/+44
Add DMA ordering list for S3C2440 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4178/1: S3C2410: DMA ordering listBen Dooks1-0/+19
Add DMA ordering list for S3C2410 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4177/1: S3C24XX: Add DMA channel allocation orderBen Dooks1-3/+46
Allow the CPU code, and any board specific initialisation code to change the allocation order of the DMA channels, or stop a peripheral allocating any DMA at-all. This is due to the scarce mapping of DMA channels on some earlier S3C24XX cpus, where the selection changes depending on the channel in use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4176/1: H1940 ledsArnaud Patard1-0/+6
H1940 leds device addition. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4175/1: SMDK2413: add udc pull-up controlBen Dooks1-1/+40
USB gadget pull-up control and device addition for the SMDK2413/SMDK2412 board. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4174/1: H1940 usb device definitionsArnaud Patard1-1/+47
This patch is adding the usb device controller to the h1940 device list. It's also adding the code to handle the usb pull-ups. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4173/1: S3C24XX usb device platform datasArnaud Patard1-0/+15
This patch is adding the functions and structures used for handling the S3C24XX udc driver platform datas. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] 4170/1: S3C2410: don't save and restore cp register 15Matt Reimer1-10/+8
Don't save and restore cp register 15 since it is only a test register on S3C2410. This is probably a leftover from the PXA sleep.S from which this was derived. Supersedes patch 4167. Signed-off-by: Matt Reimer <mreimer@vpop.net> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] 4169/1: S3C2410: align to a cache lineMatt Reimer1-1/+1
Align the code to the start of the next cache line, rather than the start of the next 256-byte page. (On i386 and ARM, the ".align" assembler directive takes its first argument as the number of low-order bits that must be zero, not the number of words comprising a cache line.) Supercedes patch 4166. Signed-off-by: Matt Reimer <mreimer@vpop.net> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] 4164/1: S3C2412: Add SMDK2412 to SMDK2413Ben Dooks1-0/+13
Our current support for the SMDK2413 is the same as the SMDK2412 (which is very similar), so add SMDK2412 to the list of machines that mach-smdk2413.c supports Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] 4163/1: S3C2410: minor typo in init commentBen Dooks1-1/+1
Fix a reference to s3c2440 in the s3c2410 cpu file Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] 4162/1: S3C24XX: update defconfig_s3c2410 after moveBen Dooks1-36/+49
Update the s3c2410_defconfig after the movement of arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] Convert dmabounce statistics to use a device attributeRussell King1-20/+15
Rather than printk'ing the dmabounce statistics occasionally to the kernel log, provide a sysfs file to allow this information to be periodically read. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[ARM] Add a reference from struct device to the dma bounce infoRussell King1-24/+7
dmabounce keeps a per-device structure, and finds the correct structure by walking a list. Since architectures can now add fields to struct device, we can attach this structure direct to the struct device, thereby eliminating the code to search the list. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4161/1: S3C24XX: fix leakage of plat-s3c24xx Kconfig itemsBen Dooks1-1/+4
Do not export S3C24XX from plat-s3c24xx on non-s3c24xx systems Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4160/1: S3C24XX: defconfig update for 2.6.20Ben Dooks1-17/+40
Update defconfig for the 2.6.20 release, and ensure that the AML5900 machine is built. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4159/1: S3C2410: fix compile of arch/arm/mach-s3c2410/mach-aml5900.cBen Dooks1-7/+1
Fix compile of arch/arm/mach-s3c2410/mach-aml5900.c due to missing fixes that have been applied to the rest of the tree. Include <linux/serial_core.h> to provide the upf_t type needed for the serial code, and remove the old static map of the SPI which is not needed for the new spi drivers. mach-amlm5900.c:51: include/asm/arch/regs-serial.h:200: error: parse error befo re "upf_t" mach-amlm5900.c:117: error: 'S3C24XX_VA_SPI' undeclared here (not in a function) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu componentsBen Dooks83-5225/+4771
The following patch and script moves the arch/arm/mach-s3c2410 directory into arch/arm/plat-s3c24xx for the generic core code and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files Include directory include/asm-arm/plat-s3c24xx is added for the core include files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4158/1: Fix user page protection macrosImre_Deak1-0/+3
The PAGE_* user page protection macros don't take into account the configured memory policy and other architecture specific bits like the global/ASID and shared mapping bits. Instead of constants let these depend on a variable fixed up at init just like PAGE_KERNEL. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-10 11:13:48 +0000