Age | Commit message (Collapse) | Author | Files | Lines |
|
Not-yet-signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have it in a register in the low-level asm, just pass it in as an
argument rather than have do_syscall_64() load it back in from the
ptregs pointer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The per-cpu system call trampoline was a clever trick, and allows us to
have percpu data even before swapgs is done by just doing %rip-relative
addressing. And that was important, because syscall doesn't have a
kernel stack, so we needed that percpu data very very early, just to get
a temporary register to switch the page tables around.
However, it turns out to be unnecessary. Because we actually have a
temporary register that we can use: %r11 is destroyed by the 'syscall'
instruction anyway.
Ok, technically it contains the user mode flags register, but we *have*
that information anyway: it's still in %rflags, we've just masked off a
few unimportant bits. We'll destroy the rest too when we do the "and"
of the CR3 value, but who cares? It's a system call.
Btw, there are a few bits in eflags that might matter to user space: DF
and AC. Right now this clears them, but that is fixable by just
changing the MSR_SYSCALL_MASK value to not include them, and clearing
them by hand the way we do for all other kernel entry points anyway.
So the only _real_ flags we'd destroy are IF and the arithmetic flags
that get trampled on by the arithmetic instructions that are part of the
%cr3 reload logic.
However, if we really end up caring, we can save off even those: we'd
take advantage of the fact that %rcx - which contains the returning IP
of the system call - also has 8 bits free.
Why 8? Even with 5-level paging, we only have 57 bits of virtual address
space, and the high address space is for the kernel (and vsyscall, but
we'd just disable native vsyscall). So the %rip value saved in %rcx can
have only 56 valid bits, which means that we have 8 bits free.
So *if* we care about IF and the arithmetic flags being saved over a
system call, we'd do:
shlq $8,%rcx
movb %r11b,%cl
shrl $8,%r11d
andl $8,%r11d
orb %r11b,%cl
to save those bits off before we then user %r11 as a temporary register
(we'd obviously need to then undo that as we save the user space state
on the stack).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Yet another pile of melted spectrum related changes:
- sanitize the array_index_nospec protection mechanism: Remove the
overengineered array_index_nospec_mask_check() magic and allow
const-qualified types as index to avoid temporary storage in a
non-const local variable.
- make the microcode loader more robust by properly propagating error
codes. Provide information about new feature bits after micro code
was updated so administrators can act upon.
- optimizations of the entry ASM code which reduce code footprint and
make the code simpler and faster.
- fix the {pmd,pud}_{set,clear}_flags() implementations to work
properly on paravirt kernels by removing the address translation
operations.
- revert the harmful vmexit_fill_RSB() optimization
- use IBRS around firmware calls
- teach objtool about retpolines and add annotations for indirect
jumps and calls.
- explicitly disable jumplabel patching in __init code and handle
patching failures properly instead of silently ignoring them.
- remove indirect paravirt calls for writing the speculation control
MSR as these calls are obviously proving the same attack vector
which is tried to be mitigated.
- a few small fixes which address build issues with recent compiler
and assembler versions"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
objtool, retpolines: Integrate objtool with retpoline support more closely
x86/entry/64: Simplify ENCODE_FRAME_POINTER
extable: Make init_kernel_text() global
jump_label: Warn on failed jump_label patching attempt
jump_label: Explicitly disable jump labels in __init code
x86/entry/64: Open-code switch_to_thread_stack()
x86/entry/64: Move ASM_CLAC to interrupt_entry()
x86/entry/64: Remove 'interrupt' macro
x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
objtool: Add module specific retpoline rules
objtool: Add retpoline validation
objtool: Use existing global variables for options
x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
x86/paravirt, objtool: Annotate indirect calls
...
|
|
Pull KVM fixes from Paolo Bonzini:
"s390:
- optimization for the exitless interrupt support that was merged in 4.16-rc1
- improve the branch prediction blocking for nested KVM
- replace some jump tables with switch statements to improve expoline performance
- fixes for multiple epoch facility
ARM:
- fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs
- make sure we can build 32-bit KVM/ARM with gcc-8.
x86:
- fixes for AMD SEV
- fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup
- fixes for async page fault migration
- small optimization to PV TLB flush (new in 4.16-rc1)
- syzkaller fixes
Generic:
- compiler warning fixes
- syzkaller fixes
- more improvements to the kvm_stat tool
Two more small Spectre fixes are going to reach you via Ingo"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits)
KVM: SVM: Fix SEV LAUNCH_SECRET command
KVM: SVM: install RSM intercept
KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command
include: psp-sev: Capitalize invalid length enum
crypto: ccp: Fix sparse, use plain integer as NULL pointer
KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled
x86/kvm: Make parse_no_xxx __init for kvm
KVM: x86: fix backward migration with async_PF
kvm: fix warning for non-x86 builds
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
tools/kvm_stat: print 'Total' line for multiple events only
tools/kvm_stat: group child events indented after parent
tools/kvm_stat: separate drilldown and fields filtering
tools/kvm_stat: eliminate extra guest/pid selection dialog
tools/kvm_stat: mark private methods as such
tools/kvm_stat: fix debugfs handling
tools/kvm_stat: print error on invalid regex
tools/kvm_stat: fix crash when filtering out all non-child trace events
tools/kvm_stat: avoid 'is' for equality checks
tools/kvm_stat: use a more pythonic way to iterate over dictionaries
...
|
|
Pull Xtensa fixes from Max Filippov:
"Two fixes for reserved memory/DMA buffers allocation in high memory on
xtensa architecture
- fix memory accounting when reserved memory is in high memory region
- fix DMA allocation from high memory"
* tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: support DMA buffers in high memory
xtensa: fix high memory/reserved memory collision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes:
- UAPI data type correction for hyperv
- correct the cpu cores field in /proc/cpuinfo on CPU hotplug
- return proper error code in the resctrl file system failure path to
avoid silent subsequent failures
- correct a subtle accounting issue in the new vector allocation code
which went unnoticed for a while and caused suspend/resume
failures"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
x86/topology: Fix function name in documentation
x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system
x86/apic/vector: Handle vector release on CPU unplug correctly
genirq/matrix: Handle CPU offlining proper
x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single commit which shuts up a bogus GCC-8 warning"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three patches to fix memory ordering issues on ALPHA and a comment to
clarify the usage scope of a mutex internal function"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
locking/mutex: Add comment to __mutex_owner() to deter usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull cleanup patchlet from Thomas Gleixner:
"A single commit removing a bunch of bogus double semicolons all over
the tree"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide/trivial: Remove ';;$' typo noise
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add handling for a missing instruction in our 32-bit BPF JIT so that
it can be used for seccomp filtering.
- Add a missing NULL pointer check before a function call in new EEH
code.
- Fix an error path in the new ocxl driver to correctly return EFAULT.
- The support for the new ibm,drc-info device tree property turns out
to need several fixes, so for now we just stop advertising to
firmware that we support it until the bugs can be ironed out.
- One fix for the new drmem code which was incorrectly modifying the
device tree in place.
- Finally two fixes for the RFI flush support, so that firmware can
advertise to us that it should be disabled entirely so as not to
affect performance.
Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord,
Michael Bringmann.
* tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Support firmware disable of RFI flush
powerpc/pseries: Support firmware disable of RFI flush
powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
powerpc/pseries: Revert support for ibm,drc-info devtree property
powerpc/pseries: Fix duplicate firmware feature for DRC_INFO
ocxl: Fix potential bad errno on irq allocation
powerpc/eeh: Fix crashes in eeh_report_resume()
|
|
The SEV LAUNCH_SECRET command fails with error code 'invalid param'
because we missed filling the guest and header system physical address
while issuing the command.
Fixes: 9f5b5b950aa9 (KVM: SVM: Add support for SEV LAUNCH_SECRET command)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
RSM instruction is used by the SMM handler to return from SMM mode.
Currently, rsm causes a #UD - which results in instruction fetch, decode,
and emulate. By installing the RSM intercept we can avoid the instruction
fetch since we know that #VMEXIT was due to rsm.
The patch is required for the SEV guest, because in case of SEV guest
memory is encrypted with guest-specific key and hypervisor will not
able to fetch the instruction bytes from the guest memory.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Using the access_ok() to validate the input before issuing the SEV
command does not buy us anything in this case. If userland is
giving us a garbage pointer then copy_to_user() will catch it when we try
to return the measurement.
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 0d0736f76347 (KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE ...)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
disabled
Avoid traversing all the cpus for pv tlb flush when steal time
is disabled since pv tlb flush depends on the field in steal time
for shared data.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The early_param() is only called during kernel initialization, So Linux
marks the functions of it with __init macro to save memory.
But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall,
So, Make them __init as well.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT
bit when enabling async_PF, but this bit is reserved on old hypervisors,
which results in a failure upon migration.
To avoid breaking different cases, we are checking for CPUID feature bit
before enabling the feature and nothing else.
Fixes: 52a5c155cf79 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode")
Cc: <stable@vger.kernel.org>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix the following sparse warning by moving the prototype
of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h .
CHECK arch/s390/kvm/../../../virt/kvm/kvm_main.c
arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reported by syzkaller:
WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4
RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
Call Trace:
vmx_handle_exit+0xbd/0xe20 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm]
kvm_vcpu_ioctl+0x3e9/0x720 [kvm]
do_vfs_ioctl+0xa4/0x6a0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x25/0x9c
The testcase creates a first thread to issue KVM_SMI ioctl, and then creates
a second thread to mmap and operate on the same vCPU. This triggers a race
condition when running the testcase with multiple threads. Sometimes one thread
exits with a triple fault while another thread mmaps and operates on the same
vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler
results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE
in kvm_handle_bad_page(), which will go on to cause an emulation failure and an
exit with KVM_EXIT_INTERNAL_ERROR.
Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Although L2 is in halt state, it will be in the active state after
VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity
State. Halting the vcpu here means the event won't be injected to L2
and this decision isn't reported to L1. Thus L0 drops an event that
should be injected to L2.
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On x86, special KVM memslots such as the TSS region have anonymous
memory mappings created on behalf of userspace, and these mappings are
removed when the VM is destroyed.
It is however possible for removing these mappings via vm_munmap() to
fail. This can most easily happen if the thread receives SIGKILL while
it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)'
in __x86_set_memory_region(). syzkaller was able to hit this, using
'exit()' to send the SIGKILL. Note that while the vm_munmap() failure
results in the mapping not being removed immediately, it is not leaked
forever but rather will be freed when the process exits.
It's not really possible to handle this failure properly, so almost
every other caller of vm_munmap() doesn't check the return value. It's
a limitation of having the kernel manage these mappings rather than
userspace.
So just remove the WARN_ON() so that users can't spam the kernel log
with this warning.
Fixes: f0d648bdf0a5 ("KVM: x86: map/unmap private slots in __x86_set_memory_region")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS
bit if UMIP is not being emulated.
We must still set the bit when emulating UMIP as the feature can be
passed to L2 where L0 will do the emulation and because L2 can change
CR4 without a VM exit, we should clear the bit if UMIP is disabled.
Fixes: 0367f205a3b7 ("KVM: vmx: add support for emulating UMIP")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The initial reset of the local APIC is performed before the VMCS has been
created, but it tries to do a vmwrite:
vmwrite error: reg 810 value 4a00 (err 18944)
CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1
Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014
Call Trace:
vmx_set_rvi [kvm_intel]
vmx_hwapic_irr_update [kvm_intel]
kvm_lapic_reset [kvm]
kvm_create_lapic [kvm]
kvm_arch_vcpu_init [kvm]
kvm_vcpu_init [kvm]
vmx_create_vcpu [kvm_intel]
kvm_vm_ioctl [kvm]
Move it later, after the VMCS has been created.
Fixes: 4191db26b714 ("KVM: x86: Update APICv on APIC reset")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.
2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.
3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.
4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.
5) Fix potential deadlocks in netfilter getsockopt() code paths, from
Paolo Abeni.
6) Netfilter stackpointer size checks really are needed to validate
user input, from Florian Westphal.
7) Missing timer init in x_tables, from Paolo Abeni.
8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.
9) When an ibmvnic device is brought down then back up again, it can be
sent queue entries from a previous session, handle this properly
instead of crashing. From Thomas Falcon.
10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.
11) When we are dumping filters in cls_api, the output SKB is empty, and
the filter we are dumping is too large for the space in the SKB, we
should return -EMSGSIZE like other netlink dump operations do.
Otherwise userland has no signal that is needs to increase the size
of its read buffer. From Roman Kapl.
12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.
13) Module refcount leak in netlink when a dump start fails, from Jason
Donenfeld.
14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
from Eric Dumazet.
15) Releasing bpf per-cpu arraymaps can take a long time, add a
condtional scheduling point. From Eric Dumazet.
16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
Daniel Borkmann.
17) Fix page leak in gianfar driver, from Andy Spencer.
18) Missed clearing of estimator scratch buffer, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net_sched: gen_estimator: fix broken estimators based on percpu stats
gianfar: simplify FCS handling and fix memory leak
ipv6 sit: work around bogus gcc-8 -Wrestrict warning
macvlan: fix use-after-free in macvlan_common_newlink()
bpf, arm64: fix out of bounds access in tail call
bpf, x64: implement retpoline for tail call
rxrpc: Fix send in rxrpc_send_data_packet()
net: aquantia: Fix error handling in aq_pci_probe()
bpf: fix rcu lockdep warning for lpm_trie map_free callback
bpf: add schedule points in percpu arrays management
regulatory: add NUL to request alpha2
ibmvnic: Fix early release of login buffer
net/smc9194: Remove bogus CONFIG_MAC reference
net: ipv4: Set addr_type in hash_keys for forwarded case
tcp_bbr: better deal with suboptimal GSO
smsc75xx: fix smsc75xx_set_features()
netlink: put module reference if dump start fails
selftests/bpf/test_maps: exit child process without error in ENOMEM case
selftests/bpf: update gitignore with test_libbpf_open
selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
..
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"arm64 and perf fixes:
- build error when accessing MPIDR_HWID_BITMASK from .S
- fix CTR_EL0 field definitions
- remove/disable some kernel messages on user faults (unhandled
signals, unimplemented syscalls)
- fix kernel page fault in unwind_frame() with function graph tracing
- fix perf sleeping while atomic errors when booting with ACPI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix unwind_frame() for filtered out fn for function graph tracing
arm64: Enforce BBM for huge IO/VMAP mappings
arm64: perf: correct PMUVer probing
arm_pmu: acpi: request IRQs up-front
arm_pmu: note IRQs and PMUs per-cpu
arm_pmu: explicitly enable/disable SPIs at hotplug
arm_pmu: acpi: check for mismatched PPIs
arm_pmu: add armpmu_alloc_atomic()
arm_pmu: fold platform helpers into platform code
arm_pmu: kill arm_pmu_platdata
ARM: ux500: remove PMU IRQ bouncer
arm64: __show_regs: Only resolve kernel symbols when running at EL1
arm64: Remove unimplemented syscall log message
arm64: Disable unhandled signal log messages by default
arm64: cpufeature: Fix CTR_EL0 field definitions
arm64: uaccess: Formalise types for access_ok()
arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fix from James Hogan:
"A single MIPS fix for mismatching struct compat_flock, resulting in
bus errors starting Firefox on Debian 8 since 4.13"
* tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Drop spurious __unused in struct compat_flock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: fixes for multiple epoch facility
We have certain cases where the multiple epoch facility is broken:
- timer wakeup during epoch change
- cpu hotplug
- SCK instruction
- stp sync checks
Fix those.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Fixes for v4.16, Round 1
Fix the interaction of userspace irqchip VMs with in-kernl irqchip VMs
and make sure we can build 32-bit KVM/ARM with gcc-8.
|
|
do_task_stat() calls get_wchan(), which further does unwind_frame().
unwind_frame() restores frame->pc to original value in case function
graph tracer has modified a return address (LR) in a stack frame to hook
a function return. However, if function graph tracer has hit a filtered
function, then we can't unwind it as ftrace_push_return_trace() has
biased the index(frame->graph) with a 'huge negative'
offset(-FTRACE_NOTRACE_DEPTH).
Moreover, arm64 stack walker defines index(frame->graph) as unsigned
int, which can not compare a -ve number.
Similar problem we can have with calling of walk_stackframe() from
save_stack_trace_tsk() or dump_backtrace().
This patch fixes unwind_frame() to test the index for -ve value and
restore index accordingly before we can restore frame->pc.
Reproducer:
cd /sys/kernel/debug/tracing/
echo schedule > set_graph_notrace
echo 1 > options/display-graph
echo wakeup > current_tracer
ps -ef | grep -i agent
Above commands result in:
Unable to handle kernel paging request at virtual address ffff801bd3d1e000
pgd = ffff8003cbe97c00
[ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
[...]
CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33
[...]
task: ffff8003c21ba000 task.stack: ffff8003cc6c0000
PC is at unwind_frame+0x12c/0x180
LR is at get_wchan+0xd4/0x134
pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145
sp : ffff8003cc6c3ab0
x29: ffff8003cc6c3ab0 x28: 0000000000000001
x27: 0000000000000026 x26: 0000000000000026
x25: 00000000000012d8 x24: 0000000000000000
x23: ffff8003c1c04000 x22: ffff000008c83000
x21: ffff8003c1c00000 x20: 000000000000000f
x19: ffff8003c1bc0000 x18: 0000fffffc593690
x17: 0000000000000000 x16: 0000000000000001
x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f
x13: 0000000000000001 x12: 0000000000000000
x11: 00000000e8f4883e x10: 0000000154f47ec8
x9 : 0000000070f367c0 x8 : 0000000000000000
x7 : 00008003f7290000 x6 : 0000000000000018
x5 : 0000000000000000 x4 : ffff8003c1c03cb0
x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000
x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000
Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000)
Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000)
[...]
[<ffff00000808892c>] unwind_frame+0x12c/0x180
[<ffff000008305008>] do_task_stat+0x864/0x870
[<ffff000008305c44>] proc_tgid_stat+0x3c/0x48
[<ffff0000082fde0c>] proc_single_show+0x5c/0xb8
[<ffff0000082b27e0>] seq_read+0x160/0x414
[<ffff000008289e6c>] __vfs_read+0x58/0x164
[<ffff00000828b164>] vfs_read+0x88/0x144
[<ffff00000828c2e8>] SyS_read+0x60/0xc0
[<ffff0000080834a0>] __sys_trace_return+0x0/0x4
Fixes: 20380bb390a4 (arm64: ftrace: fix a stack tracer's output under function graph tracer)
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
[catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
CPU hotplug operations
Without this fix, /proc/cpuinfo will display an incorrect amount
of CPU cores, after bringing them offline and online again, as
exemplified below:
$ cat /proc/cpuinfo | grep cores
cpu cores : 4
cpu cores : 8
cpu cores : 8
cpu cores : 20
cpu cores : 4
cpu cores : 3
cpu cores : 2
cpu cores : 2
This patch fixes this by always zeroing the booted_cores variable
upon turning off a logical CPU.
Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jgross@suse.com
Cc: luto@kernel.org
Cc: prarit@redhat.com
Cc: vkuznets@redhat.com
Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Successful RMW operations are supposed to be fully ordered, but
Alpha's xchg() and cmpxchg() do not meet this requirement.
Will Deacon noticed the bug:
> So MP using xchg:
>
> WRITE_ONCE(x, 1)
> xchg(y, 1)
>
> smp_load_acquire(y) == 1
> READ_ONCE(x) == 0
>
> would be allowed.
... which thus violates the above requirement.
Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
__ASM__MB
Replace each occurrence of __ASM__MB with a (trailing) smp_mb() in
xchg(), cmpxchg(), and remove the now unused __ASM__MB definitions;
this improves readability, with no additional synchronization cost.
Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291469-5702-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
path as unlikely()
vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving
branch hints to the compiler can actually make a substantial cycle
difference by keeping the fast path contiguous in memory.
With this optimization, the retpoline-guest/retpoline-host case is
about 50 cycles faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets. It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
sub-directory in resctrl file system
If no monitoring feature is detected because all monitoring features are
disabled during boot time or there is no monitoring feature in hardware,
creating rdtgroup sub-directory by "mkdir" command reports error:
mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory
But the sub-directory actually is generated and content is correct:
cpus cpus_list schemata tasks
The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after
the sub-directory is created and the returned value is reported as an error
to user.
Clear the returned value to report to user that the sub-directory is
actually created successfully.
Signed-off-by: Wang Hui <john.wanghui@huawei.com>
Signed-off-by: Zhang Yanfei <yanfei.zhang@huawei.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vikas <vikas.shivappa@intel.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When a irq vector is replaced, then the previous vector is normally
released when the first interrupt happens on the new vector. If the target
CPU of the previous vector is already offline when the new vector is
installed, then the previous vector is silently discarded, which leads to
accounting issues causing suspend failures and other problems.
Adjust the logic so that the previous vector is freed in the underlying
matrix allocator to ensure that the accounting stays correct.
Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some versions of firmware will have a setting that can be configured
to disable the RFI flush, add support for it.
Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some versions of firmware will have a setting that can be configured
to disable the RFI flush, add support for it.
Fixes: 8989d56878a7 ("powerpc/pseries: Query hypervisor for RFI flush settings")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Memory addtion and removal by count and indexed-count methods
temporarily mark the LMBs that are being added/removed by a special
flag value DRMEM_LMB_RESERVED. Accessing flags value directly at a few
places without proper accessor method is causing two unexpected
side-effects:
- DRMEM_LMB_RESERVED bit is becoming part of the flags word of
drconf_cell_v2 entries in ibm,dynamic-memory-v2 DT property.
- This results in extra drconf_cell entries in ibm,dynamic-memory-v2.
For example if 1G memory is added, it leads to one entry for 3 LMBs
and 1 separate entry for the last LMB. All the 4 LMBs should be
defined by one entry here.
Fix this by always accessing the flags by its accessor method
drmem_lmb_flags().
Fixes: 2b31e3aec1db ("powerpc/drmem: Add support for ibm, dynamic-memory-v2 property")
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.
The failure was:
Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
FATAL ERROR: Unable to parse input tree
/usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
/usr/bin/mkimage Can't add hashes to FIT blob
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:
[ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510
[...]
[ 347.043065] [fffb850e96492510] address between user and kernel address ranges
[ 347.050205] Internal error: Oops: 96000004 [#1] SMP
[...]
[ 347.190829] x13: 0000000000000000 x12: 0000000000000000
[ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10
[ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000
[ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000
[ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a
[ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500
[ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500
[ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
[ 347.235221] Call trace:
[ 347.237656] 0xffff000002f3a4fc
[ 347.240784] bpf_test_run+0x78/0xf8
[ 347.244260] bpf_prog_test_run_skb+0x148/0x230
[ 347.248694] SyS_bpf+0x77c/0x1110
[ 347.251999] el0_svc_naked+0x30/0x34
[ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b)
[...]
In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.
While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:
# bpftool p d j i 988
[...]
38: ldr w10, [x1,x10]
3c: cmp w2, w10
40: b.ge 0x000000000000007c <-- signed cmp
44: mov x10, #0x20 // #32
48: cmp x26, x10
4c: b.gt 0x000000000000007c
50: add x26, x26, #0x1
54: mov x10, #0x110 // #272
58: add x10, x1, x10
5c: lsl x11, x2, #3
60: ldr x11, [x10,x11] <-- faulting insn (f86b694b)
64: cbz x11, 0x000000000000007c
[...]
Meaning, the tests passed because commit ddb55992b04d ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.
Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in 90caccdd8cc0
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.
Result after patch:
# bpftool p d j i 268
[...]
38: ldr w10, [x1,x10]
3c: add w2, w2, #0x0
40: cmp w2, w10
44: b.cs 0x0000000000000080
48: mov x10, #0x20 // #32
4c: cmp x26, x10
50: b.hi 0x0000000000000080
54: add x26, x26, #0x1
58: mov x10, #0x110 // #272
5c: add x10, x1, x10
60: lsl x11, x2, #3
64: ldr x11, [x10,x11]
68: cbz x11, 0x0000000000000080
[...]
Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).
JIT dump after patch:
# bpftool p d x i 1
0: (18) r2 = map[id:1]
2: (b7) r3 = 0
3: (85) call bpf_tail_call#12
4: (b7) r0 = 2
5: (95) exit
With CONFIG_RETPOLINE:
# bpftool p d j i 1
[...]
33: cmp %edx,0x24(%rsi)
36: jbe 0x0000000000000072 |*
38: mov 0x24(%rbp),%eax
3e: cmp $0x20,%eax
41: ja 0x0000000000000072 |
43: add $0x1,%eax
46: mov %eax,0x24(%rbp)
4c: mov 0x90(%rsi,%rdx,8),%rax
54: test %rax,%rax
57: je 0x0000000000000072 |
59: mov 0x28(%rax),%rax
5d: add $0x25,%rax
61: callq 0x000000000000006d |+
66: pause |
68: lfence |
6b: jmp 0x0000000000000066 |
6d: mov %rax,(%rsp) |
71: retq |
72: mov $0x2,%eax
[...]
* relative fall-through jumps in error case
+ retpoline for indirect jump
Without CONFIG_RETPOLINE:
# bpftool p d j i 1
[...]
33: cmp %edx,0x24(%rsi)
36: jbe 0x0000000000000063 |*
38: mov 0x24(%rbp),%eax
3e: cmp $0x20,%eax
41: ja 0x0000000000000063 |
43: add $0x1,%eax
46: mov %eax,0x24(%rbp)
4c: mov 0x90(%rsi,%rdx,8),%rax
54: test %rax,%rax
57: je 0x0000000000000063 |
59: mov 0x28(%rax),%rax
5d: add $0x25,%rax
61: jmpq *%rax |-
63: mov $0x2,%eax
[...]
* relative fall-through jumps in error case
- plain indirect jump as before
[0] https://support.google.com/faqs/answer/7625886
[1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V cleanups from Palmer Dabbelt:
"This contains a handful of small cleanups.
The only functional change is that IRQs are now enabled during
exception handling, which was found when some warnings triggered with
`CONFIG_DEBUG_ATOMIC_SLEEP=y`.
The remaining fixes should have no functional change: `sbi_save()` has
been renamed to `parse_dtb()` reflect what it actually does, and a
handful of unused Kconfig entries have been removed"
* tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
Rename sbi_save to parse_dtb to improve code readability
RISC-V: Enable IRQ during exception handling
riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select
riscv: kconfig: Remove RISCV_IRQ_INTC select
riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB select
|
|
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: don't defer struct page initialization for Xen pv guests
lib/Kconfig.debug: enable RUNTIME_TESTING_MENU
vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems
selftests/memfd: add run_fuse_test.sh to TEST_FILES
bug.h: work around GCC PR82365 in BUG()
mm/swap.c: make functions and their kernel-doc agree (again)
mm/zpool.c: zpool_evictable: fix mismatch in parameter name and kernel-doc
ida: do zeroing in ida_pre_get()
mm, swap, frontswap: fix THP swap if frontswap enabled
certs/blacklist_nohashes.c: fix const confusion in certs blacklist
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
mm, mlock, vmscan: no more skipping pagevecs
mm: memcontrol: fix NR_WRITEBACK leak in memcg and system stats
Kbuild: always define endianess in kconfig.h
include/linux/sched/mm.h: re-inline mmdrop()
tools: fix cross-compile var clobbering
|
|
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared
objects must use PIC PLT. To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.
On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches. Linker can always reduce
PLT32 relocation to PC32 if function is defined locally. Local
functions should use PC32 relocation. As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.
R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in
binutils master branch which will become binutils 2.31.
[ hjl is working on having better documentation on this all, but a few
more notes from him:
"PLT32 relocation is used as marker for PC-relative branches. Because
of EBX, it looks odd to generate PLT32 relocation on i386 when EBX
doesn't have GOT.
As for symbol resolution, PLT32 and PC32 relocations are almost
interchangeable. But when linker sees PLT32 relocation against a
protected symbol, it can resolved locally at link-time since it is
used on a branch instruction. Linker can't do that for PC32
relocation"
but for the kernel use, the two are basically the same, and this
commit gets things building and working with the current binutils
master - Linus ]
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ioremap_page_range doesn't honour break-before-make and attempts to put
down huge mappings (using p*d_set_huge) over the top of pre-existing
table entries. This leads to us leaking page table memory and also gives
rise to TLB conflicts and spurious aborts, which have been seen in
practice on Cortex-A75.
Until this has been resolved, refuse to put block mappings when the
existing entry is found to be present.
Fixes: 324420bf91f60 ("arm64: add support for ioremap() block mappings")
Reported-by: Hanjun Guo <hanjun.guo@linaro.org>
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
struct efi_uga_draw_protocol *uga = NULL, *first_uga;
efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
unsigned long nr_ugas;
- u32 *handles = (u32 *)uga_handle;;
+ u32 *handles = (u32 *)uga_handle;
efi_status_t status = EFI_INVALID_PARAMETER;
int i;
This patch is the result of the following script:
$ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)
... followed by manual review to make sure it's all good.
Splitting this up is just crazy talk, let's get over with this and just do it.
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
I am using SECCOMP to filter syscalls on a ppc32 platform, and noticed
that the JIT compiler was failing on the BPF even though the
interpreter was working fine.
The issue was that the compiler was missing one of the instructions
used by SECCOMP, so here is a patch to enable JIT for that
instruction.
Fixes: eb84bab0fb38 ("ppc: Kconfig: Enable BPF JIT on ppc32")
Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This reverts commit 02ef6dd8109b581343ebeb1c4c973513682535d6.
The earlier patch tried to enable support for a new property
"ibm,drc-info" on powerpc systems.
Unfortunately, some errors in the associated patch set break things
in some of the DLPAR operations. In particular when attempting to
hot-add a new CPU or set of CPUs, the original patch failed to
properly calculate the available resources, and aborted the operation.
In addition, the original set missed several opportunities to compress
and reuse common code.
As the associated patch set was meant to provide an optimization of
storage and performance of a set of device-tree properties for future
systems with large amounts of resources, reverting just restores
the previous behavior for existing systems. It seems unnecessary
to enable this feature and introduce the consequent problems in the
field that it will cause at this time, so please revert it for now
until testing of the corrections are finished properly.
Fixes: 02ef6dd8109b ("powerpc: Enable support for ibm,drc-info devtree property")
Signed-off-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We had a mid-air collision between two new firmware features, DRMEM_V2
and DRC_INFO, and they ended up with the same value.
No one's actually reported any problems, presumably because the new
firmware that supports both properties is not widely available, and
the two properties tend to be enabled together.
Still if we ever had one enabled but not the other, the bugs that
could result are many and varied. So fix it.
Fixes: 3f38000eda48 ("powerpc/firmware: Add definitions for new drc-info firmware feature")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
|