summaryrefslogtreecommitdiffstats
path: root/arch/xtensa/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-12-15xtensa: enable HAVE_DMA_CONTIGUOUSMax Filippov1-0/+1
Enable HAVE_DMA_CONTIGUOUS, reserve contiguous memory at bootmem_init, use dma_alloc_from_contiguous and dma_release_from_contiguous in xtensa_dma_alloc/free. This allows for big contiguous DMA buffer allocation from designated area configured in the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-29xtensa: disable MMU initialization option on MMUv2 coresMax Filippov1-0/+1
MMU initialization option is currently ignored on MMUv2 cores, but it is used in Kconfig to select kernel load and start addresses. This choice is not available for MMUv2 cores as they have hardwired TLB entries. Disable MMU initialization option for known MMUv2 cores so that they get correct kernel load/start address by default. This fixes the default allmodconfig build. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-09xtensa: fix default kernel load addressMax Filippov1-2/+4
Make default kernel load address 0xd0003000 for MMUv2 cores and 0x60003000 for noMMU cores. Don't initialize MMU inside vmlinux for predefined MMUv2 cores (it's noop anyway). This fixes the following defconfig build error: arch/xtensa/kernel/built-in.o: In function `fast_alloca': (.text+0x99a): dangerous relocation: j: cannot encode: _WindowUnderflow12 arch/xtensa/kernel/built-in.o: In function `fast_alloca': (.text+0x99d): dangerous relocation: j: cannot encode: _WindowUnderflow8 arch/xtensa/kernel/built-in.o: In function `fast_alloca': (.text+0x9a0): dangerous relocation: j: cannot encode: _WindowUnderflow4 arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup': (.text+0x23a3): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104) arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup': (.text+0x23c1): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104) arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup': (.text+0x23dd): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104) With this change all xtensa defconfigs build correctly. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: support reserved-memory DT nodeMax Filippov1-0/+1
This allows reserving regions of physical memory from the device tree. See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: drop sysmem and switch to memblockMax Filippov1-0/+3
Memblock is the standard kernel boot-time memory tracker/allocator. Use it instead of the custom sysmem allocator. This allows using kmemleak, CMA and device tree memory reservation. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}Max Filippov1-11/+7
Now that the kernel load address and KSEG physical base address have their own Kconfig symbols PLATFORM_DEFAULT_MEM seems redundant. It makes little sense to use it in MMU configurations instead of KSEG_PADDR. In noMMU configurations there's no explicit KSEG, so it's still useful for the early cache initialization and definition of ARCH_PFN_OFFSET, which affects mem_map size. - limit it to noMMU; MMU variants have XCHAL_KSEG_PADDR and XCHAL_KSEG_SIZE; - don't use it to define TASK_SIZE or MAX_LOW_PFN: first doesn't make any difference in noMMU, second is meaningless as there's no high memory; - don't add default physical memory region: memory layout should come from the DT, bootloader tags, or memmap= command line parameter. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: cleanup MMU setup and kernel layout macrosMax Filippov1-6/+20
Make kernel load address explicit, independent of the selected MMU configuration and configurable from Kconfig. Do not restrict it to the first 512MB of the physical address space. Cleanup kernel memory layout macros: - rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR; - drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS; - introduce PHYS_OFFSET and use it in __va and __pa definitions; - synchronize MMU/noMMU vectors, drop unused NMI vector; - replace hardcoded vectors offset of 0x3000 with Kconfig symbol. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: add alternative kernel memory layoutsMax Filippov1-0/+44
MMUv3 is able to support low memory bigger than 128MB. Implement 256MB and 512MB KSEG layouts: - add Kconfig selector for KSEG layout; - add KSEG base address, size and alignment definitions to arch/xtensa/include/asm/kmem_layout.h; - use new definitions in TLB initialization; - add build time memory map consistency checks. See Documentation/xtensa/mmu.txt for the details of new memory layouts. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-05-20exit_thread: remove empty bodiesJiri Slaby1-0/+1
Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26xtensa: remove ARCH_WANT_OPTIONAL_GPIOLIBLinus Walleij1-1/+0
This symbols is not needed to get access to selecting the GPIOLIB anymore: any arch can select GPIOLIB. Cc: Michael Büsch <m@bues.ch> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-20Merge tag 'xtensa-next-20160320' of git://github.com/czankel/xtensa-linuxLinus Torvalds1-0/+17
Pull Xtensa updates from Chris Zankel: "Xtensa improvements for 4.6: - control whether perf IRQ is treated as NMI from Kconfig - implement ioremap for regions outside KIO segment - fix ISS serial port behaviour when EOF is reached - fix preemption in {clear,copy}_user_highpage - fix endianness issues for XTFPGA devices, big-endian cores are now fully functional - clean up debug infrastructure and add support for hardware breakpoints and watchpoints - add processor configurations for Three Core HiFi-2 MX and HiFi3 cpus" * tag 'xtensa-next-20160320' of git://github.com/czankel/xtensa-linux: xtensa: add test_kc705_hifi variant xtensa: add Three Core HiFi-2 MX Variant. xtensa: support hardware breakpoints/watchpoints xtensa: use context structure for debug exceptions xtensa: remove remaining non-functional KGDB bits xtensa: clear all DBREAKC registers on start xtensa: xtfpga: fix earlycon endianness xtensa: xtfpga: fix i2c controller register width and endianness xtensa: xtfpga: fix ethernet controller endianness xtensa: xtfpga: fix serial port register width and endianness xtensa: define CONFIG_CPU_{BIG,LITTLE}_ENDIAN xtensa: fix preemption in {clear,copy}_user_highpage xtensa: ISS: don't hang if stdin EOF is reached xtensa: support ioremap for memory outside KIO region xtensa: use XTENSA_INT_LEVEL macro in asm/timex.h xtensa: make fake NMI configurable
2016-03-11xtensa: support hardware breakpoints/watchpointsMax Filippov1-0/+1
Use perf framework to manage hardware instruction and data breakpoints. Add two new ptrace calls: PTRACE_GETHBPREGS and PTRACE_SETHBPREGS to query and set instruction and data breakpoints. Address bit 0 choose instruction (0) or data (1) break register, bits 31..1 are the register number. Both calls transfer two 32-bit words: address (0) and control (1). Instruction breakpoint contorl word is 0 to clear breakpoint, 1 to set. Data breakpoint control word bit 31 is 'trigger on store', bit 30 is 'trigger on load, bits 29..0 are length. Length 0 is used to clear a breakpoint. To set a breakpoint length must be a power of 2 in the range 1..64 and the address must be length-aligned. Introduce new thread_info flag: TIF_DB_DISABLED. Set it if debug exception is raised by the kernel code accessing watched userspace address and disable corresponding data breakpoint. On exit to userspace check that flag and, if set, restore all data breakpoints. Handle debug exceptions raised with PS.EXCM set. This may happen when window overflow/underflow handler or fast exception handler hits data breakpoint, in which case save and disable all data breakpoints, single-step faulting instruction and restore data breakpoints. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-08PCI: Include pci/hotplug Kconfig directly from pci/KconfigBjorn Helgaas1-2/+0
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/hotplug/Kconfig. Note that this effectively adds pci/hotplug/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/hotplug/Kconfig: alpha arm avr32 frv m68k microblaze mn10300 sparc unicore32 Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-20dma-mapping: always provide the dma_map_ops based implementationChristoph Hellwig1-1/+0
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-11xtensa: make fake NMI configurableMax Filippov1-0/+16
Do not always use fake NMI when safe, provide Kconfig option instead. Print a warning if fake NMI is chosen in unsafe configuration, but allow it, because it may work if the user knows that interrupts with priorities at or above PMM IRQ are not used. Add a check to NMI handler that BUGs if any of these IRQs fire. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-03xtensa: add FORCE_MAX_ZONEORDER to KconfigMax Filippov1-0/+14
Make maximal memory allocation order configurable, so that drivers could allocate huge buffers when they need to. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: select HAVE_FUTEX_CMPXCHGMax Filippov1-0/+1
Not having HAVE_FUTEX_CMPXCHG makes futex_detect_cmpxchg probe cmpxchg_futex_value_locked with NULL address. It's not guaranteed to fault without MMU, instead it locks up on Xtensa when there's no RAM at address 0. Select HAVE_FUTEX_CMPXCHG in noMMU Xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: fix default memory start addressMax Filippov1-1/+1
RAM starts at 0x60000000 on noMMU cores, not at 0x40000000. Fix the default. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: implement counting and sampling perf eventsMax Filippov1-0/+10
Xtensa Performance Monitor Module has up to 8 32 bit wide performance counters. Each counter may be enabled independently and can count any single type of hardware performance events. Event counting may be enabled and disabled globally (per PMM). Each counter has status register with bits indicating if the counter has been overflown and may be programmed to raise profiling IRQ on overflow. This IRQ is used to rewind counters and allow for counting more than 2^32 samples for counting events and to report samples for sampling events. For more details see Tensilica Debug User's Guide, chapter 8 "Performance monitor module". Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: select PERF_USE_VMALLOC for cache-aliasing configurationsMax Filippov1-0/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: clean up Kconfig dependencies for custom coresMax Filippov1-8/+3
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: reimplement DMA API using common helpersMax Filippov1-0/+2
- keep existing functionality: don't handle attributes, don't support high memory; - implement scatterlist primitives (map/unmap/sync); - enable DMA API debug. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-06-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "As usual, mostly comment, kerneldoc and printk() fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: lpfc: Grammar s/an negative/a negative/ ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/ cx25821: cx25821-medusa-reg.h: fix 0x0x prefix lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants rapidio: Fix kerneldoc and comment qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config() treewide: Kconfig: fix wording / spelling usb/serial: fix grammar in Kconfig help text for FTDI_SIO megaraid_sas: fix kerneldoc netfilter: ebtables: fix comment grammar drm/radeon: fix comment isdn: fix grammar in comment ARM: KVM: fix comment
2015-05-26treewide: Kconfig: fix wording / spellingMasanari Iida1-1/+1
This patch fix spelling typos in Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-27xtensa: xtfpga: fix hardware lockup caused by LCD driverMax Filippov1-0/+30
LCD driver is always built for the XTFPGA platform, but its base address is not configurable, and is wrong for ML605/KC705. Its initialization locks up KC705 board hardware. Make the whole driver optional, and its base address and bus width configurable. Implement 4-bit bus access method. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-12-15Merge tag 'xtensa-for-next-20141213' of ↵Chris Zankel1-0/+6
git://github.com/jcmvbkbc/linux-xtensa into for_next Xtensa improvements for 3.19: - fix permissions for kmapped pages so that copy_to_user_page works with them; - add power management menu to Kconfig to allow use of runtime PM.
2014-12-09xtensa: add power management menu to KconfigMax Filippov1-0/+6
This allows using runtime power management feature on Xtensa. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21xtensa: remove s6000 variant and s6105 platformDaniel Glöckner1-13/+0
The Stretch s6000 family support has been merged into mainline 5 years ago. There appear to be no users of this code since nobody complained that there is a merge error preventing compilation. Apart from the s6105 IP camera reference design there are no s6000 devices known to ever have run Linux and as the chips are out of production there probably never will be. The successor s7000 no longer uses an Xtensa core for the OS. Let's remove the code until someone is found who actually needs it. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21xtensa: make PLATFORM_DEFAULT_MEM parameters configurableMax Filippov1-0/+36
This allows using xtfpga platform with both MMU and noMMU cores. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21xtensa: nommu: set up cache and atomctl in initialize_mmuMax Filippov1-1/+0
initialize_mmu sets up atomctl SR which is needed for s32c1i to function correctly even in noMMU configurations. It's also a good place to set up caching attributes of physical memory. Allow enabling INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX in noMMU configurations for setting up atomctl and cache attributes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-06xtensa: xtfpga: only select ethoc when ethernet is availableMax Filippov1-1/+1
Otherwise we get the following build warning: (XTENSA_PLATFORM_XTFPGA) selects ETHOC which has unmet direct dependencies (NETDEVICES && ETHERNET && HAS_IOMEM && HAS_DMA) Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-06xtensa: ISS: add BLOCK dependency to BLK_DEV_SIMDISKMax Filippov1-1/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: deprecate fast_xtensa and fast_spill_registers syscallsMax Filippov1-0/+26
These syscalls are not used by userspace tools for some time now, and they have issues when called with invalid arguments. It's not worth changing signal delivery mechanism as we don't expect any new users for these syscalls. Let's keep them for backwards compatibility under #ifdef, disabled by default. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: remove orphan MATH_EMULATION symbolMax Filippov1-5/+0
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: select HAVE_IDE only on platforms that may have itMax Filippov1-1/+2
HAVE_IDE is not a property of architecture but of a platform, and neither ISS or XTFPGA support it. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: sort 'select' statements in KconfigMax Filippov1-11/+11
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: make MMU-related configuration options depend on MMUMax Filippov1-0/+2
MMUv3 and HIGHMEM support are available only on configurations with MMU, don't show them otherwise. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: simplify addition of new core variantsMax Filippov1-1/+35
Instead of adding new Kconfig options and Makefile rules for each new core variant provide XTENSA_VARIANT_CUSTOM variant and record variant name in the XTENSA_VARIANT_NAME variable. Adding new core variant now means providing directory structure under arch/xtensa/variant and specifying correct name in kernel configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-05-05Merge tag 'xtensa-next-20140503' of git://github.com/czankel/xtensa-linuxLinus Torvalds1-1/+19
Pull Xtensa fixes from Chris Zankel: - Fixes allmodconfig, allnoconfig builds - Adds highmem support - Enables build-time exception table sorting. * tag 'xtensa-next-20140503' of git://github.com/czankel/xtensa-linux: xtensa: ISS: don't depend on CONFIG_TTY xtensa: xt2000: drop redundant sysmem initialization xtensa: add support for KC705 xtensa: xtfpga: introduce SoC I/O bus xtensa: add HIGHMEM support xtensa: optimize local_flush_tlb_kernel_range xtensa: dump sysmem from the bootmem_init xtensa: handle memmap kernel option xtensa: keep sysmem banks ordered in mem_reserve xtensa: keep sysmem banks ordered in add_sysmem_bank xtensa: split bootparam and kernel meminfo xtensa: enable sorting extable at build time xtensa: export __{invalidate,flush}_dcache_range xtensa: Export __invalidate_icache_range
2014-05-05xtensa: ISS: don't depend on CONFIG_TTYMax Filippov1-1/+0
Build console support only when CONFIG_TTY is selected. This restores ISS as the default platform for allnoconfig builds. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-04-07Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König1-2/+2
If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-06xtensa: add HIGHMEM supportMax Filippov1-0/+18
Introduce fixmap area just below the vmalloc region. Use it for atomic mapping of high memory pages. High memory on cores with cache aliasing is not supported and is still to be implemented. Fail build for such configurations for now. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-02xtensa: enable sorting extable at build timeMax Filippov1-0/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Daney <ddaney.cavm@gmail.com>
2014-02-21xtensa: support common clock frameworkMax Filippov1-0/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: no need to select USE_GENERIC_SMP_HELPERSPaul Bolle1-1/+0
Commit f615136c06a7 ("xtensa: add SMP support") added "select USE_GENERIC_SMP_HELPERS". But the Kconfig symbol USE_GENERIC_SMP_HELPERS was already removed in v3.13, so that select is a nop. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: fsf: drop nonexistent GPIO32 supportMax Filippov1-1/+0
The toolchain for xtensa FSF core never supported GPIO32, drop it on the linux side too. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Baruch Siach <baruch@tkos.co.il>
2014-01-25Merge tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linuxLinus Torvalds1-5/+47
Pull Xtensa patches from Chris Zankel: "The major changes are adding support for SMP for Xtensa, fixing and cleaning up the ISS (simulator) network driver, and better support for device trees" * tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linux: (40 commits) xtensa: implement ndelay xtensa: clean up udelay xtensa: enable HAVE_PERF_EVENTS xtensa: remap io area defined in device tree xtensa: support default device tree buses xtensa: initialize device tree clock sources xtensa: xtfpga: fix definitions of platform devices xtensa: standardize devicetree cpu compatible strings xtensa: avoid duplicate of IO range definitions xtensa: fix ATOMCTL register documentation xtensa: Enable irqs after cpu is set online xtensa: ISS: raise network polling rate to 10 times/sec xtensa: remove unused XTENSA_ISS_NETWORK Kconfig parameter xtensa: ISS: avoid simple_strtoul usage xtensa: Switch to sched_clock_register() xtensa: implement CPU hotplug xtensa: add SMP support xtensa: add MX irqchip xtensa: clear timer IRQ unconditionally in its handler xtensa: clean up do_interrupt/do_IRQ ...
2014-01-15xtensa: enable HAVE_PERF_EVENTSBaruch Siach1-0/+1
This allows the perf tool to monitor kernel tracepoint events. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-14xtensa: remove unused XTENSA_ISS_NETWORK Kconfig parameterMichael Opdenacker1-4/+0
This removes the XTENSA_ISS_NETWORK Kconfig parameter, which was no longer used anywhere in the source code and Makefiles. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-14xtensa: implement CPU hotplugMax Filippov1-0/+9
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>