summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2021-02-20Merge tag 'ras_updates_for_v5.12' of ↵Linus Torvalds9-770/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - move therm_throt.c to the thermal framework, where it belongs. - identify CPUs which miss to enter the broadcast handler, as an additional debugging aid. * tag 'ras_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: thermal: Move therm_throt there from x86/mce x86/mce: Get rid of mcheck_intel_therm_init() x86/mce: Make mce_timed_out() identify holdout CPUs
2021-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2-113/+315
Pull networking updates from David Miller: "Here is what we have this merge window: 1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik. 2) Add RSS multi group support to octeontx2-pf driver, from Geetha Sowjanya. 3) Add support for KS8851 PHY. From Marek Vasut. 4) Add support for GarfieldPeak bluetooth controller from Kiran K. 5) Add support for half-duplex tcan4x5x can controllers. 6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw Liew. 7) Rework RX port offload infrastructure, particularly wrt, UDP tunneling, from Jakub Kicinski. 8) Add BCM72116 PHY support, from Florian Fainelli. 9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir Oltean. 10) Add support for picosecond rx delay in dwmac-meson8b chips. From Martin Blumenstingl. 11) Support TSO on xfrm interfaces from Eyal Birger. 12) Add support for MP_PRIO to mptcp stack, from Geliang Tang. 13) Support BCM4908 integrated switch, from Rafał Miłecki. 14) Support for directly accessing kernel module variables via module BTF info, from Andrii Naryiko. 15) Add DASH (esktop and mobile Architecture for System Hardware) support to r8169 driver, from Heiner Kallweit. 16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron. 17) Add support for 100 base0x SFP devices, from Bjarni Jonasson. 18) Support link aggregation in DSA, from Tobias Waldekranz. 19) Support for bitwidse atomics in bpf, from Brendan Jackman. 20) SmartEEE support in at803x driver, from Russell King. 21) Add support for flow based tunneling to GTP, from Pravin B Shelar. 22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder. 23) TLS RX offload for bonding, from Tariq Toukan. 24) RX decap offklload support in mac80211, from Felix Fietkou. 25) devlink health saupport in octeontx2-af, from George Cherian. 26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung 27) Delegated actionss support in mptcp, from Paolo Abeni. 28) Support receive timestamping when doin zerocopy tcp receive. From Arjun Ray. 29) HTB offload support for mlx5, from Maxim Mikityanskiy. 30) UDP GRO forwarding, from Maxim Mikityanskiy. 31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach. 32) Weighted random twos choice algorithm for ipvs, from Darby Payne. 33) Fix netdev registration deadlock, from Johannes Berg. 34) Various conversions to new tasklet api, from EmilRenner Berthing. 35) Bulk skb allocations in veth, from Lorenzo Bianconi. 36) New ethtool interface for lane setting, from Danielle Ratson. 37) Offload failiure notifications for routes, from Amit Cohen. 38) BCM4908 support, from Rafał Miłecki. 39) Support several new iwlwifi chips, from Ihab Zhaika. 40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski. 41) Support for mhi prrotocols, from Loic Poulain. 42) Optimize bpf program stats. 43) Implement RFC6056, for better port randomization, from Eric Dumazet. 44) hsr tag offloading support from George McCollister. 45) Netpoll support in qede, from Bhaskar Upadhaya. 46) 2005/400g speed support in bonding 3ad mode, from Nikolay Aleksandrov. 47) Netlink event support in mptcp, from Florian Westphal. 48) Better skbuff caching, from Alexander Lobakin. 49) MRP (Media Redundancy Protocol) offloading in DSA and a few drivers, from Horatiu Vultur. 50) mqprio saupport in mvneta, from Maxime Chevallier. 51) Remove of_phy_attach, no longer needed, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits) octeontx2-pf: Fix otx2_get_fecparam() cteontx2-pf: cn10k: Prevent harmless double shift bugs net: stmmac: Add PCI bus info to ethtool driver query output ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable. ptp: ptp_clockmatrix: Coding style - tighten vertical spacing. ptp: ptp_clockmatrix: Clean-up dev_*() messages. ptp: ptp_clockmatrix: Remove unused header declarations. ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable. ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock. net: stmmac: dwmac-sun8i: Add a shutdown callback net: stmmac: dwmac-sun8i: Minor probe function cleanup net: stmmac: dwmac-sun8i: Use reset_control_reset net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check net: stmmac: dwmac-sun8i: Return void from PHY unpower r8169: use macro pm_ptr net: mdio: Remove of_phy_attach() net: mscc: ocelot: select PACKING in the Kconfig net: re-solve some conflicts after net -> net-next merge net: dsa: tag_rtl4_a: Support also egress tags ...
2021-02-19KVM: x86/mmu: Remove a variety of unnecessary exportsSean Christopherson2-21/+15
Remove several exports from the MMU that are no longer necessary. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-15-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86: Fold "write-protect large" use case into generic write-protectSean Christopherson2-47/+17
Drop kvm_mmu_slot_largepage_remove_write_access() and refactor its sole caller to use kvm_mmu_slot_remove_write_access(). Remove the now-unused slot_handle_large_level() and slot_handle_all_level() helpers. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-14-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PMLSean Christopherson5-153/+36
Stop setting dirty bits for MMU pages when dirty logging is disabled for a memslot, as PML is now completely disabled when there are no memslots with dirty logging enabled. This means that spurious PML entries will be created for memslots with dirty logging disabled if at least one other memslot has dirty logging enabled. However, spurious PML entries are already possible since dirty bits are set only when a dirty logging is turned off, i.e. memslots that are never dirty logged will have dirty bits cleared. In the end, it's faster overall to eat a few spurious PML entries in the window where dirty logging is being disabled across all memslots. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: VMX: Dynamically enable/disable PML based on memslot dirty loggingMakarand Sonare6-5/+70
Currently, if enable_pml=1 PML remains enabled for the entire lifetime of the VM irrespective of whether dirty logging is enable or disabled. When dirty logging is disabled, all the pages of the VM are manually marked dirty, so that PML is effectively non-operational. Setting the dirty bits is an expensive operation which can cause severe MMU lock contention in a performance sensitive path when dirty logging is disabled after a failed or canceled live migration. Manually setting dirty bits also fails to prevent PML activity if some code path clears dirty bits, which can incur unnecessary VM-Exits. In order to avoid this extra overhead, dynamically enable/disable PML when dirty logging gets turned on/off for the first/last memslot. Signed-off-by: Makarand Sonare <makarandsonare@google.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86: Further clarify the logic and comments for toggling log dirtySean Christopherson1-4/+11
Add a sanity check in kvm_mmu_slot_apply_flags to assert that the LOG_DIRTY_PAGES flag is indeed being toggled, and explicitly rely on that holding true when zapping collapsible SPTEs. Manipulating the CPU dirty log (PML) and write-protection also relies on this assertion, but that's not obvious in the current code. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-11-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86: Move MMU's PML logic to common codeSean Christopherson5-100/+24
Drop the facade of KVM's PML logic being vendor specific and move the bits that aren't truly VMX specific into common x86 code. The MMU logic for dealing with PML is tightly coupled to the feature and to VMX's implementation, bouncing through kvm_x86_ops obfuscates the code without providing any meaningful separation of concerns or encapsulation. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Make dirty log size hook (PML) a value, not a functionSean Christopherson4-13/+4
Store the vendor-specific dirty log size in a variable, there's no need to wrap it in a function since the value is constant after hardware_setup() runs. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect()Sean Christopherson1-1/+4
Expand the comment about need to use write-protection for nested EPT when PML is enabled to clarify that the tagging is a nop when PML is _not_ enabled. Without the clarification, omitting the PML check looks wrong at first^Wfifth glance. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: nVMX: Disable PML in hardware when running L2Sean Christopherson2-16/+25
Unconditionally disable PML in vmcs02, KVM emulates PML purely in the MMU, e.g. vmx_flush_pml_buffer() doesn't even try to copy the L2 GPAs from vmcs02's buffer to vmcs12. At best, enabling PML is a nop. At worst, it will cause vmx_flush_pml_buffer() to record bogus GFNs in the dirty logs. Initialize vmcs02.GUEST_PML_INDEX such that PML writes would trigger VM-Exit if PML was somehow enabled, skip flushing the buffer for guest mode since the index is bogus, and freak out if a PML full exit occurs when L2 is active. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEsSean Christopherson3-12/+14
When zapping SPTEs in order to rebuild them as huge pages, use the new helper that computes the max mapping level to detect whether or not a SPTE should be zapped. Doing so avoids zapping SPTEs that can't possibly be rebuilt as huge pages, e.g. due to hardware constraints, memslot alignment, etc... This also avoids zapping SPTEs that are still large, e.g. if migration was canceled before write-protected huge pages were shattered to enable dirty logging. Note, such pages are still write-protected at this time, i.e. a page fault VM-Exit will still occur. This will hopefully be addressed in a future patch. Sadly, TDP MMU loses its const on the memslot, but that's a pervasive problem that's been around for quite some time. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Pass the memslot to the rmap callbacksSean Christopherson1-9/+15
Pass the memslot to the rmap callbacks, it will be used when zapping collapsible SPTEs to verify the memslot is compatible with hugepages before zapping its SPTEs. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Split out max mapping level calculation to helperSean Christopherson2-15/+24
Factor out the logic for determining the maximum mapping level given a memslot and a gpa. The helper will be used when zapping collapsible SPTEs when disabling dirty logging, e.g. to avoid zapping SPTEs that can't possibly be rebuilt as hugepages. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and ↵Sean Christopherson1-1/+2
HugeTLB pages Zap SPTEs that are backed by ZONE_DEVICE pages when zappings SPTEs to rebuild them as huge pages in the TDP MMU. ZONE_DEVICE huge pages are managed differently than "regular" pages and are not compound pages. Likewise, PageTransCompoundMap() will not detect HugeTLB, so switch to PageCompound(). This matches the similar check in kvm_mmu_zap_collapsible_spte. Cc: Ben Gardon <bgardon@google.com> Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: nVMX: no need to undo inject_page_fault change on nested vmexitPaolo Bonzini1-3/+0
This is not needed because the tweak was done on the guest_mmu, while nested_ept_uninit_mmu_context has just changed vcpu->arch.walk_mmu back to the root_mmu. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: nSVM: fix running nested guests when npt=0Paolo Bonzini1-0/+20
In case of npt=0 on host, nSVM needs the same .inject_page_fault tweak as VMX has, to make sure that shadow mmu faults are injected as vmexits. It is not clear why this is needed at all, but for now keep the same code as VMX and we'll fix it for both. Based on a patch by Maxim Levitsky <mlevitsk@redhat.com>. Fixes: 7c86663b68ba ("KVM: nSVM: inject exceptions via svm_check_nested_events") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: nSVM: move nested vmrun tracepoint to enter_svm_guest_modeMaxim Levitsky1-12/+14
This way trace will capture all the nested mode entries (including entries after migration, and from smm) Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210217145718.1217358-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: VMX: read idt_vectoring_info a bit earlierMaxim Levitsky1-1/+3
trace_kvm_exit prints this value (using vmx_get_exit_info) so it makes sense to read it before the trace point. Fixes: dcf068da7eb2 ("KVM: VMX: Introduce generic fastpath handler") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210217145718.1217358-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: VMX: Allow INVPCID in guest without PCIDSean Christopherson1-10/+0
Remove the restriction that prevents VMX from exposing INVPCID to the guest without PCID also being exposed to the guest. The justification of the restriction is that INVPCID will #UD if it's disabled in the VMCS. While that is a true statement, it's also true that RDTSCP will #UD if it's disabled in the VMCS. Neither of those things has any dependency whatsoever on the guest being able to set CR4.PCIDE=1, which is what is effectively allowed by exposing PCID to the guest. Removing the bogus restriction aligns VMX with SVM, and also allows for an interesting configuration. INVPCID is that fastest way to do a global TLB flush, e.g. see native_flush_tlb_global(). Allowing INVPCID without PCID would let a guest use the expedited flush while also limiting the number of ASIDs consumed by the guest. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210212003411.1102677-4-seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: x86: Advertise INVPCID by defaultSean Christopherson3-6/+3
Advertise INVPCID by default (if supported by the host kernel) instead of having both SVM and VMX opt in. INVPCID was opt in when it was a VMX only feature so that KVM wouldn't prematurely advertise support if/when it showed up in the kernel on AMD hardware. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210212003411.1102677-3-seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-18KVM: SVM: Intercept INVPCID when it's disabled to inject #UDSean Christopherson1-4/+4
Intercept INVPCID if it's disabled in the guest, even when using NPT, as KVM needs to inject #UD in this case. Fixes: 4407a797e941 ("KVM: SVM: Enable INVPCID feature on AMD") Cc: Babu Moger <babu.moger@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210212003411.1102677-2-seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-17sched,x86: Allow !PREEMPT_DYNAMICPeter Zijlstra1-6/+18
Allow building x86 with PREEMPT_DYNAMIC=n, this is needed for PREEMPT_RT as it makes no sense to not have full preemption on PREEMPT_RT. Fixes: 8c98e8cf723c ("preempt/dynamic: Provide preempt_schedule[_notrace]() static calls") Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Mike Galbraith <efault@gmx.de> Link: https://lkml.kernel.org/r/YCK1+JyFNxQnWeXK@hirez.programming.kicks-ass.net
2021-02-17entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling pointFrederic Weisbecker1-0/+1
Following the idle loop model, cleanly check for pending rcuog wakeup before the last rescheduling point upon resuming to guest mode. This way we can avoid to do it from rcu_user_enter() with the last resort self-IPI hack that enforces rescheduling. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210131230548.32970-6-frederic@kernel.org
2021-02-17sched: Harden PREEMPT_DYNAMICPeter Zijlstra1-2/+2
Use the new EXPORT_STATIC_CALL_TRAMP() / static_call_mod() to unexport the static_call_key for the PREEMPT_DYNAMIC calls such that modules can no longer update these calls. Having modules change/hi-jack the preemption calls would be horrible. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-17static_call: Allow module use without exposing static_call_keyJosh Poimboeuf1-0/+7
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module can use static_call_update() to change the function called. This is not desirable in general. Not exporting static_call_key however also disallows usage of static_call(), since objtool needs the key to construct the static_call_site. Solve this by allowing objtool to create the static_call_site using the trampoline address when it builds a module and cannot find the static_call_key symbol. The module loader will then try and map the trampole back to a key before it constructs the normal sites list. Doing this requires a trampoline -> key associsation, so add another magic section that keeps those. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
2021-02-17preempt/dynamic: Provide preempt_schedule[_notrace]() static callsPeter Zijlstra (Intel)1-8/+26
Provide static calls to control preempt_schedule[_notrace]() (called in CONFIG_PREEMPT) so that we can override their behaviour when preempt= is overriden. Since the default behaviour is full preemption, both their calls are initialized to the arch provided wrapper, if any. [fweisbec: only define static calls when PREEMPT_DYNAMIC, make it less dependent on x86 with __preempt_schedule_func] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-7-frederic@kernel.org
2021-02-17preempt: Introduce CONFIG_PREEMPT_DYNAMICMichal Hocko1-0/+1
Preemption mode selection is currently hardcoded on Kconfig choices. Introduce a dedicated option to tune preemption flavour at boot time, This will be only available on architectures efficiently supporting static calls in order not to tempt with the feature against additional overhead that might be prohibitive or undesirable. CONFIG_PREEMPT_DYNAMIC is automatically selected by CONFIG_PREEMPT if the architecture provides the necessary support (CONFIG_STATIC_CALL_INLINE, CONFIG_GENERIC_ENTRY, and provide with __preempt_schedule_function() / __preempt_schedule_notrace_function()). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> [peterz: relax requirement to HAVE_STATIC_CALL] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-5-frederic@kernel.org
2021-02-17static_call/x86: Add __static_call_return0()Peter Zijlstra1-2/+15
Provide a stub function that return 0 and wire up the static call site patching to replace the CALL with a single 5 byte instruction that clears %RAX, the return value register. The function can be cast to any function pointer type that has a single %RAX return (including pointers). Also provide a version that returns an int for convenience. We are clearing the entire %RAX register in any case, whether the return value is 32 or 64 bits, since %RAX is always a scratch register anyway. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-2-frederic@kernel.org
2021-02-17Merge branch 'perf/kprobes' into perf/core, to pick up finished branchIngo Molnar2-98/+81
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-47/+158
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-02-16 The following pull-request contains BPF updates for your *net-next* tree. There's a small merge conflict between 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") from net-next tree and 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows: [...] lock_sock(sk); err = tcp_zerocopy_receive(sk, &zc, &tss); err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname, &zc, &len, err); release_sock(sk); [...] We've added 116 non-merge commits during the last 27 day(s) which contain a total of 156 files changed, 5662 insertions(+), 1489 deletions(-). The main changes are: 1) Adds support of pointers to types with known size among global function args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov. 2) Add bpf_iter for task_vma which can be used to generate information similar to /proc/pid/maps, from Song Liu. 3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow rewriting bind user ports from BPF side below the ip_unprivileged_port_start range, both from Stanislav Fomichev. 4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map as well as per-cpu maps for the latter, from Alexei Starovoitov. 5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer for sleepable programs, both from KP Singh. 6) Extend verifier to enable variable offset read/write access to the BPF program stack, from Andrei Matei. 7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to query device MTU from programs, from Jesper Dangaard Brouer. 8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF tracing programs, from Florent Revest. 9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when otherwise too many passes are required, from Gary Lin. 10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function verification both related to zero-extension handling, from Ilya Leoshkevich. 11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa. 12) Batch of AF_XDP selftest cleanups and small performance improvement for libbpf's xsk map redirect for newer kernels, from Björn Töpel. 13) Follow-up BPF doc and verifier improvements around atomics with BPF_FETCH, from Brendan Jackman. 14) Permit zero-sized data sections e.g. if ELF .rodata section contains read-only data from local variables, from Yonghong Song. 15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15x86/platform/intel-mid: Update Copyright year and drop file namesAndy Shevchenko2-4/+4
Update Copyright year and drop file names from files themselves. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15x86/platform/intel-mid: Remove unused header inclusion in intel-mid.hAndy Shevchenko1-1/+0
After the commit f1be6cdaf57c ("x86/platform/intel-mid: Make intel_scu_device_register() static") the platform_device.h is not being used anymore by intel-mid.h. Remove it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.Andy Shevchenko2-40/+0
Since there is no more user of this global variable and associated custom API, we may safely drop this legacy reinvented a wheel from the kernel sources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.hAndy Shevchenko3-22/+5
The header is used by a single user. Move header content to that user. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15x86/PCI: Describe @reg for type1_access_ok()Andy Shevchenko1-0/+1
Describe missed parameter in documentation of type1_access_ok(). Otherwise "make W=1 arch/x86/pci/" produces the following warning: CHECK arch/x86/pci/intel_mid_pci.c CC arch/x86/pci/intel_mid_pci.o arch/x86/pci/intel_mid_pci.c:152: warning: Function parameter or member 'reg' not described in 'type1_access_ok' Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15x86/PCI: Get rid of custom x86 model comparisonAndy Shevchenko1-2/+15
Switch the platform code to use x86_id_table and accompanying API instead of custom comparison against x86 CPU model. This is one of the last users of custom API for that and following changes will remove it for the good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15sfi: Remove framework for deprecated firmwareAndy Shevchenko29-1509/+8
SFI-based platforms are gone. So does this framework. This removes mention of SFI through the drivers and other code as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()Jan Beulich1-1/+2
We should not set up further state if either mapping failed; paying attention to just the user mapping's status isn't enough. Also use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15Xen/x86: don't bail early from clear_foreign_p2m_mapping()Jan Beulich1-7/+5
Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its only caller (gnttab_map_refs()) don't clean up after themselves in case of error. Higher level callers are expected to do so. However, in order for that to really clean up any partially set up state, the operation should not terminate upon encountering an entry in unexpected state. It is particularly relevant to notice here that set_foreign_p2m_mapping() would skip setting up a p2m entry if its grant mapping failed, but it would continue to set up further p2m entries as long as their mappings succeeded. Arguably down the road set_foreign_p2m_mapping() may want its page state related WARN_ON() also converted to an error return. This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-14Merge tag 'x86_urgent_for_v5.11' of ↵Linus Torvalds4-7/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "I kinda knew while typing 'I hope this is the last batch of x86/urgent updates' last week, Murphy was reading too and uttered 'Hold my beer!'. So here's more fixes... Thanks Murphy. Anyway, three more x86/urgent fixes for 5.11 final. We should be finally ready (famous last words). :-) - An SGX use after free fix - A fix for the fix to disable CET instrumentation generation for kernel code. We forgot 32-bit, which we seem to do very often nowadays - A Xen PV fix to irqdomain init ordering" * tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init() x86/build: Disable CET instrumentation in the kernel for 32-bit too x86/sgx: Maintain encl->refcount for each encl->mm_list entry
2021-02-12um: remove process stub VMAJohannes Berg1-1/+1
This mostly reverts the old commit 3963333fe676 ("uml: cover stubs with a VMA") which had added a VMA to the existing PTEs. However, there's no real reason to have the PTEs in the first place and the VMA cannot be 'fixed' in place, which leads to bugs that userspace could try to unmap them and be forcefully killed, or such. Also, there's a bit of an ugly hole in userspace's address space. Simplify all this: just install the stub code/page at the top of the (inner) address space, i.e. put it just above TASK_SIZE. The pages are simply hard-coded to be mapped in the userspace process we use to implement an mm context, and they're out of reach of the inner mmap/munmap/mprotect etc. since they're above TASK_SIZE. Getting rid of the VMA also makes vma_merge() no longer hit one of the VM_WARN_ON()s there because we installed a VMA while the code assumes the stack VMA is the first one. It also removes a lockdep warning about mmap_sem usage since we no longer have uml_setup_stubs() and thus no longer need to do any manipulation that would require mmap_sem in activate_mm(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12um: rework userspace stubs to not hard-code stub locationJohannes Berg5-34/+62
The userspace stacks mostly have a stack (and in the case of the syscall stub we can just set their stack pointer) that points to the location of the stub data page already. Rework the stubs to use the stack pointer to derive the start of the data page, rather than requiring it to be hard-coded. In the clone stub, also integrate the int3 into the stack remap, since we really must not use the stack while we remap it. This prepares for putting the stub at a variable location that's not part of the normal address space of the userspace processes running inside the UML machine. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12um: separate child and parent errors in clone stubJohannes Berg2-2/+2
If the two are mixed up, then it looks as though the parent returned an error if the child failed (before) the mmap(), and then the resulting process never gets killed. Fix this by splitting the child and parent errors, reporting and using them appropriately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12Merge tag 'kvmarm-5.12' of ↵Paolo Bonzini6-16/+62
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.12 - Make the nVHE EL2 object relocatable, resulting in much more maintainable code - Handle concurrent translation faults hitting the same page in a more elegant way - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Allow the disabling of symbol export from assembly code - Simplification of the early init hypercall handling
2021-02-12Merge branch 'x86/cleanups' into x86/mmIngo Molnar15-111/+60
Merge recent cleanups to the x86 MM code to resolve a conflict. Conflicts: arch/x86/mm/fault.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12Merge branch 'x86/paravirt' into x86/entryIngo Molnar57-402/+485
Merge in the recent paravirt changes to resolve conflicts caused by objtool annotations. Conflicts: arch/x86/xen/xen-asm.S Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-11bpf: Add per-program recursion prevention mechanismAlexei Starovoitov1-0/+15
Since both sleepable and non-sleepable programs execute under migrate_disable add recursion prevention mechanism to both types of programs when they're executed via bpf trampoline. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210033634.62081-5-alexei.starovoitov@gmail.com
2021-02-11bpf: Compute program stats for sleepable programsAlexei Starovoitov1-19/+12
Since sleepable programs don't migrate from the cpu the excution stats can be computed for them as well. Reuse the same infrastructure for both sleepable and non-sleepable programs. run_cnt -> the number of times the program was executed. run_time_ns -> the program execution time in nanoseconds including the off-cpu time when the program was sleeping. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210210033634.62081-4-alexei.starovoitov@gmail.com
2021-02-11KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytesSean Christopherson1-5/+6
Add a 2 byte pad to struct compat_vcpu_info so that the sum size of its fields is actually 64 bytes. The effective size without the padding is also 64 bytes due to the compiler aligning evtchn_pending_sel to a 4-byte boundary, but depending on compiler alignment is subtle and unnecessary. Opportunistically replace spaces with tables in the other fields. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210210182609.435200-6-seanjc@google.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-07 23:38:47 +0000