summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2010-12-16lguest: populate initial_page_tableRusty Russell3-5/+107
Two x86 patches broke lguest: 1) v2.6.35-492-g72d7c3b, which changed x86 to use the memblock allocator. In lguest, the host places linear page tables at the top of mem, which used to be enough to get us up to the swapper_pg_dir page tables. With the first patch, the direct mapping tables used that memory: Before: kernel direct mapping tables up to 4000000 @ 7000-1a000 After: kernel direct mapping tables up to 4000000 @ 3fed000-4000000 I initially fixed this by lying about the amount of memory we had, so the kernel wouldn't blatt the lguest boot pagetables (yuk!), but then... 2) v2.6.36-rc8-54-gb40827f, which made x86 boot use initial_page_table. This was initialized in a part of head_32.S which isn't executed by lguest; it is then copied into swapper_pg_dir. So we have to initialize it; and anyway we switch to it before we blatt the old tables, so that fixes the previous damage as well. For the moment, I cut & pasted the code into lguest's boot code, but next merge window I will merge them. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> To: x86@kernel.org
2010-12-16lguest: restore boot speedRusty Russell1-4/+7
lguest is dumb and drops *all* the pagetables for set_pte (which is only used for kernel mapping manipulation, so it's OK without highmem). But it's used a lot in boot, too. As a guest optimization, we suppressed this flushing until the first page switch. Now we have initial_page_table, that happens much earlier, so extend the heuristic to wait until we switch to something other than the swapper_pg_dir or initial_page_table. As measured on my laptop under kvm, this dropped the time-to-mount-root from 48 seconds to 4.3 seconds. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-12-16lguest: fix crash lguest_time_initRusty Russell1-1/+1
fe25c7fc2e "x86: lguest: Convert to new irq chip functions" converted enable_lguest_irq() to take a struct irq_data *, but didn't fix the one internal caller. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> To: x86@kernel.org
2010-12-15crypto: ghash-intel - ghash-clmulni-intel_glue needs err.hRandy Dunlap1-0/+1
Add missing header file: arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR' arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-08Merge branches 'x86-fixes-for-linus', 'perf-fixes-for-linus' and ↵Linus Torvalds3-0/+8
'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/pvclock: Zero last_value on resume * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Fix eternal wait for stillborn child perf header: Don't assume there's no attr info if no sample ids is provided perf symbols: Figure out start address of kernel map from kallsyms perf symbols: Fix kallsyms kernel/module map splitting * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: nohz: Fix printk_needs_cpu() return value on offline cpus printk: Fix wake_up_klogd() vs cpu hotplug
2010-12-03Merge branch '2.6.37-rc4-pvhvm-fixes' of ↵Linus Torvalds4-9/+23
git://xenbits.xen.org/people/sstabellini/linux-pvhvm * '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: unplug the emulated devices at resume time xen: fix save/restore for PV on HVM guests with pirq remapping xen: resume the pv console for hvm guests too xen: fix MSI setup and teardown for PV on HVM guests xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
2010-12-03Merge branches 'upstream/core' and 'upstream/bugfix' of ↵Linus Torvalds2-31/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: allocate irq descs on any NUMA node xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory xen: use default_idle xen: clean up "extra" memory handling some more * 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: x86/32: perform initial startup on initial_page_table xen: don't bother to stop other cpus on shutdown/reboot
2010-12-02vmalloc: eagerly clear ptes on vunmapJeremy Fitzhardinge1-2/+0
On stock 2.6.37-rc4, running: # mount lilith:/export /mnt/lilith # find /mnt/lilith/ -type f -print0 | xargs -0 file crashes the machine fairly quickly under Xen. Often it results in oops messages, but the couple of times I tried just now, it just hung quietly and made Xen print some rude messages: (XEN) mm.c:2389:d80 Bad type (saw 7400000000000001 != exp 3000000000000000) for mfn 1d7058 (pfn 18fa7) (XEN) mm.c:964:d80 Attempt to create linear p.t. with write perms (XEN) mm.c:2389:d80 Bad type (saw 7400000000000010 != exp 1000000000000000) for mfn 1d2e04 (pfn 1d1fb) (XEN) mm.c:2965:d80 Error while pinning mfn 1d2e04 Which means the domain tried to map a pagetable page RW, which would allow it to map arbitrary memory, so Xen stopped it. This is because vm_unmap_ram() left some pages mapped in the vmalloc area after NFS had finished with them, and those pages got recycled as pagetable pages while still having these RW aliases. Removing those mappings immediately removes the Xen-visible aliases, and so it has no problem with those pages being reused as pagetable pages. Deferring the TLB flush doesn't upset Xen because it can flush the TLB itself as needed to maintain its invariants. When unmapping a region in the vmalloc space, clear the ptes immediately. There's no point in deferring this because there's no amortization benefit. The TLBs are left dirty, and they are flushed lazily to amortize the cost of the IPIs. This specific motivation for this patch is an oops-causing regression since 2.6.36 when using NFS under Xen, triggered by the NFS client's use of vm_map_ram() introduced in 56e4ebf877b60 ("NFS: readdir with vmapped pages") . XFS also uses vm_map_ram() and could cause similar problems. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Bryan Schumaker <bjschuma@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Alex Elder <aelder@sgi.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-02xen: unplug the emulated devices at resume timeStefano Stabellini3-2/+3
Early after being resumed we need to unplug again the emulated devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02xen: fix MSI setup and teardown for PV on HVM guestsStefano Stabellini1-7/+20
When remapping MSIs into pirqs for PV on HVM guests, qemu is responsible for doing the actual mapping and unmapping. We only give qemu the desired pirq number when we ask to do the mapping the first time, after that we should be reading back the pirq number from qemu every time we want to re-enable the MSI. This fixes a bug in xen_hvm_setup_msi_irqs that manifests itself when trying to enable the same MSI for the second time: the old MSI to pirq mapping is still valid at this point but xen_hvm_setup_msi_irqs would try to assign a new pirq anyway. A simple way to reproduce this bug is to assign an MSI capable network card to a PV on HVM guest, if the user brings down the corresponding ethernet interface and up again, Linux would fail to enable MSIs on the device. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-11-29xen: x86/32: perform initial startup on initial_page_tableIan Campbell2-15/+56
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-29xen: don't bother to stop other cpus on shutdown/rebootJeremy Fitzhardinge1-4/+0
Xen will shoot all the VCPUs when we do a shutdown hypercall, so there's no need to do it manually. In any case it will fail because all the IPI irqs have been pulled down by this point, so the cross-CPU calls will simply hang forever. Until change 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce the function calls were not synchronously waited for, so this wasn't apparent. However after that change the calls became synchronous leading to a hang on shutdown on multi-VCPU guests. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org> Cc: Alok Kataria <akataria@vmware.com>
2010-11-28Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2-1/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix the software context switch counter perf, x86: Fixup Kconfig deps x86, perf, nmi: Disable perf if counters are not accessible perf: Fix inherit vs. context rotation bug
2010-11-28x86/pvclock: Zero last_value on resumeJeremy Fitzhardinge3-0/+8
If the guest domain has been suspend/resumed or migrated, then the system clock backing the pvclock clocksource may revert to a smaller value (ie, can be non-monotonic across the migration/save-restore). Make sure we zero last_value in that case so that the domain continues to see clock updates. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds9-43/+84
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled x86-64: Fix and clean up AMD Fam10 MMCONF enabling x86: UV: Address interrupt/IO port operation conflict x86: Use online node real index in calulate_tbl_offset() x86, asm: Fix binutils 2.15 build failure
2010-11-27Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds4-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Remove incorrect open-coded container_of() perf record: Handle restrictive permissions in /proc/{kallsyms,modules} x86/kprobes: Prevent kprobes to probe on save_args() irq_work: Drop cmpxchg() result perf: Fix owner-list vs exit x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG tracing: Fix recursive user stack trace perf,hw_breakpoint: Initialize hardware api earlier x86: Ignore trap bits on single step exceptions tracing: Force arch_local_irq_* notrace for paravirt tracing: Fix module use of trace_bprintk()
2010-11-26perf, x86: Fixup Kconfig depsPeter Zijlstra1-1/+1
This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to a hw_breakpoint dep) but doesn't unconditionally provide HAVE_PERF_EVENT. (This can cause build failures on M386/M486 kernel .config's.) Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222055.982965150@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26x86, perf, nmi: Disable perf if counters are not accessibleDon Zickus1-0/+20
In a kvm virt guests, the perf counters are not emulated. Instead they return zero on a rdmsrl. The perf nmi handler uses the fact that crossing a zero means the counter overflowed (for those counters that do not have specific interrupt bits). Therefore on kvm guests, perf will swallow all NMIs thinking the counters overflowed. This causes problems for subsystems like kgdb which needs NMIs to do its magic. This problem was discovered by running kgdb tests. The solution is to write garbage into a perf counter during the initialization and hopefully reading back the same number. On kvm guests, the value will be read back as zero and we disable perf as a result. Reported-by: Jason Wessel <jason.wessel@windriver.com> Patch-inspired-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-25Merge branch 'for-linus' of ↵Linus Torvalds3-16/+56
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: remove duplicated #include xen: x86/32: perform initial startup on initial_page_table
2010-11-25arch/x86/include/asm/fixmap.h: mark __set_fixmap_offset as __always_inlineAndrew Morton1-2/+2
When compiling arch/x86/kernel/early_printk_mrst.c with i386 allmodconfig, gcc-4.1.0 generates an out-of-line copy of __set_fixmap_offset() which contains a reference to __this_fixmap_does_not_exist which the compiler cannot elide. Marking __set_fixmap_offset() as __always_inline prevents this. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Feng Tang <feng.tang@intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-24xen: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in arch/x86/xen/setup.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-24xen: x86/32: perform initial startup on initial_page_tableIan Campbell2-15/+56
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-24Merge branch 'upstream/for-linus' of ↵Linus Torvalds7-30/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits) xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable Revert "xen/privcmd: create address space to allow writable mmaps" xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: implement XENMEM_machphys_mapping xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier ...
2010-11-22xen: use default_idleJeremy Fitzhardinge1-15/+5
We just need the idle loop to drop into safe_halt, which default_idle() is perfectly capable of doing. There's no need to duplicate it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-22xen: clean up "extra" memory handling some moreJeremy Fitzhardinge1-12/+9
Make sure that extra_pages is added for all E820_RAM regions beyond mem_end - completely excluded regions as well as the remains of partially included regions. Also makes sure the extra region is not unnecessarily high, and simplifies the logic to decide which regions should be added. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-22Merge branches 'upstream/core', 'upstream/xenfs' and 'upstream/evtchn' into ↵Jeremy Fitzhardinge22-259/+308
upstream/for-linus * upstream/core: xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen: implement XENMEM_machphys_mapping * upstream/xenfs: Revert "xen/privcmd: create address space to allow writable mmaps" xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code * upstream/evtchn: xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier xen/evtchn: ports start enabled xen/evtchn: dynamically allocate port_user array xen/evtchn: track enabled state for each port
2010-11-22xen: set IO permission early (before early_cpu_init())Konrad Rzeszutek Wilk2-9/+11
This patch is based off "xen dom0: Set up basic IO permissions for dom0." by Juan Quintela <quintela@redhat.com>. On AMD machines when we boot the kernel as Domain 0 we get this nasty: mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000] (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1-101116 x86_64 debug=y Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff8130271b>] (XEN) RFLAGS: 0000000000000282 EM: 1 CONTEXT: pv guest (XEN) rax: 000000008000c068 rbx: ffffffff8186c680 rcx: 0000000000000068 (XEN) rdx: 0000000000000cf8 rsi: 000000000000c000 rdi: 0000000000000000 (XEN) rbp: ffffffff81801e98 rsp: ffffffff81801e50 r8: ffffffff81801eac (XEN) r9: ffffffff81801ea8 r10: ffffffff81801eb4 r11: 00000000ffffffff (XEN) r12: ffffffff8186c694 r13: ffffffff81801f90 r14: ffffffffffffffff (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000000006f0 (XEN) cr3: 0000000221803000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81801e50: RIP points to read_pci_config() function. The issue is that we don't set IO permissions for the Linux kernel early enough. The call sequence used to be: xen_start_kernel() x86_init.oem.arch_setup = xen_setup_arch; setup_arch: - early_cpu_init - early_init_amd - read_pci_config - x86_init.oem.arch_setup [ xen_arch_setup ] - set IO permissions. We need to set the IO permissions earlier on, which this patch does. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-19xen: re-enable boot-time ballooningJeremy Fitzhardinge1-2/+1
Now that the balloon driver doesn't stumble over non-RAM pages, we can enable the extra space for ballooning. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-18Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-11/+10
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Fix host userspace gsbase corruption KVM: Correct ordering of ldt reload wrt fs/gs reload
2010-11-18Merge branch 'for_linus' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,ppc: Fix regression in evr register handling kgdb,x86: fix regression in detach handling kdb: fix crash when KDB_BASE_CMD_MAX is exceeded kdb: fix memory leak in kdb_main.c
2010-11-18x86-64: Fix and clean up AMD Fam10 MMCONF enablingJan Beulich2-35/+31
Candidate memory ranges were not calculated properly (start addresses got needlessly rounded down, and end addresses didn't get rounded up at all), address comparison for secondary CPUs was done on only part of the address, and disabled status wasn't tracked properly. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <4CE24DF40200007800022737@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86/kprobes: Prevent kprobes to probe on save_args()Masami Hiramatsu1-0/+2
Prevent kprobes to probe on save_args() since this function will be called from breakpoint exception handler. That will cause infinit loop on breakpoint handling. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20101118101655.2779.2816.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86: UV: Address interrupt/IO port operation conflictDimitri Sivanich5-5/+49
This patch for SGI UV systems addresses a problem whereby interrupt transactions being looped back from a local IOH, through the hub to a local CPU can (erroneously) conflict with IO port operations and other transactions. To workaound this we set a high bit in the APIC IDs used for interrupts. This bit appears to be ignored by the sockets, but it avoids the conflict in the hub. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20101116222352.GA8155@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> ___ arch/x86/include/asm/uv/uv_hub.h | 4 ++++ arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++- arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++-- arch/x86/platform/uv/tlb_uv.c | 2 +- arch/x86/platform/uv/uv_time.c | 4 +++- 5 files changed, 49 insertions(+), 5 deletions(-)
2010-11-18Merge branch 'perf/urgent' of ↵Ingo Molnar1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
2010-11-18x86: Use online node real index in calulate_tbl_offset()Yinghai Lu1-2/+3
Found a NUMA system that doesn't have RAM installed at the first socket which hangs while executing init scripts. bisected it to: | commit 932967202182743c01a2eee4bdfa2c42697bc586 | Author: Shaohua Li <shaohua.li@intel.com> | Date: Wed Oct 20 11:07:03 2010 +0800 | | x86: Spread tlb flush vector between nodes It turns out when first socket is not online it could have cpus on node1 tlb_offset set to bigger than NUM_INVALIDATE_TLB_VECTORS. That could affect systems like 4 sockets, but socket 2 doesn't have installed, sockets 3 will get too big tlb_offset. Need to use real online node idx. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Shaohua Li <shaohua.li@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CDEDE59.40603@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, asm: Fix binutils 2.15 build failureTetsuo Handa1-1/+1
Add parentheses around one pushl_cfi argument. Commit df5d1874 "x86: Use {push,pop}{l,q}_cfi in more places" caused GNU assembler 2.15 (Debian Sarge) to fail. It is still failing as of commit 07bd8516 "x86, asm: Restore parentheses around one pushl_cfi argument". This patch solves build failure with GNU assembler 2.15. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Jan Beulich <jbeulich@novell.com> Cc: heukelum@fastmail.fm Cc: hpa@linux.intel.com LKML-Reference: <201011160445.oAG4jGif079860@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOGRakib Mullick1-3/+4
backtrace_mask has been used under the code context of ARCH_HAS_NMI_WATCHDOG. So put it into that context. We were warned by the following warning: arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18Merge branch 'tip/perf/urgent-3' of ↵Ingo Molnar1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2010-11-17KVM: VMX: Fix host userspace gsbase corruptionAvi Kivity1-8/+7
We now use load_gs_index() to load gs safely; unfortunately this also changes MSR_KERNEL_GS_BASE, which we managed separately. This resulted in confusion and breakage running 32-bit host userspace on a 64-bit kernel. Fix by - saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs - doing the host save/load unconditionally, instead of only when in guest long mode Things can be cleaned up further, but this is the minmal fix for now. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-17KVM: Correct ordering of ldt reload wrt fs/gs reloadAvi Kivity2-3/+3
If fs or gs refer to the ldt, they must be reloaded after the ldt. Reorder the code to that effect. Userspace code that uses the ldt with kvm is nonexistent, so this doesn't fix a user-visible bug. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-17kgdb,x86: fix regression in detach handlingJason Wessel1-4/+8
The fix from ba773f7c510c0b252145933926c636c439889207 (x86,kgdb: Fix hw breakpoint regression) was not entirely complete. The kgdb_remove_all_hw_break() function also needs to call the hw_break_release_slot() or else a breakpoint can get activated again after the debugger has detached. The kgdb test suite exposes the behavior in the form of either a hang or repetitive failure. The kernel config that exposes the problem contains all of the following: CONFIG_DEBUG_RODATA=y CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100" Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann3-3/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16Merge commit 'v2.6.37-rc2' into upstream/xenfsJeremy Fitzhardinge264-7245/+10153
* commit 'v2.6.37-rc2': (10093 commits) Linux 2.6.37-rc2 capabilities/syslog: open code cap_syslog logic to fix build failure i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata include/linux/kernel.h: Move logging bits to include/linux/printk.h Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again) hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch PCI: sysfs: fix printk warnings GFS2: Fix inode deallocation race ...
2010-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-20/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-12Merge branch 'upstream/core' of ↵Linus Torvalds2-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: do not release any memory under 1M in domain 0 xen: events: do not unmask event channels on resume xen: correct size of level2_kernel_pgt
2010-11-12Merge branch 'stable/xen-pcifront-fixes' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: MAINTAINERS: Mark XEN lists as moderated xen-pcifront: fix PCI reference leak xen-pcifront: Remove duplicate inclusion of headers. xen: fix memory leak in Xen PCI MSI/MSI-X allocator. MAINTAINERS: Update mailing list name for Xen pieces.
2010-11-12xen: implement XENMEM_machphys_mappingIan Campbell6-18/+34
This hypercall allows Xen to specify a non-default location for the machine to physical mapping. This capability is used when running a 32 bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to exactly the size required. [ Impact: add Xen hypercall definitions ] Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-11-12Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds9-155/+119
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pvclock: Remove leftover scale_delta() function x86, apic: Remove double #include x86: Adjust section annotations in AMD Fam10 MMCONF enabling code x86, UV: Update node controller MMRs x86: Remove unnecessary casts of void ptr returning alloc function return values x86: Address gcc4.6 "set but not used" warnings in apic.h x86, mm: Fix section mismatch in tlb.c
2010-11-12x86: Ignore trap bits on single step exceptionsFrederic Weisbecker1-0/+4
When a single step exception fires, the trap bits, used to signal hardware breakpoints, are in a random state. These trap bits might be set if another exception will follow, like a breakpoint in the next instruction, or a watchpoint in the previous one. Or there can be any junk there. So if we handle these trap bits during the single step exception, we are going to handle an exception twice, or we are going to handle junk. Just ignore them in this case. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=21332 Reported-by: Michael Stefaniuc <mstefani@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Cc: Alexandre Julliard <julliard@winehq.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: All since 2.6.33.x <stable@kernel.org>
2010-11-11xen: set vma flag VM_PFNMAP in the privcmd mmap file_opStefano Stabellini1-1/+2
Set VM_PFNMAP in the privcmd mmap file_op, rather than later in xen_remap_domain_mfn_range when it is too late because vma_wants_writenotify has already been called and vm_page_prot has already been modified. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 08:10:58 +0000