summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2022-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-41/+103
Pull kvm fixes from Paolo Bonzini: "ARM: - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good. x86: - Fix potential races when walking host page table - Fix shadow page table leak when KVM runs nested - Work around bug in userspace when KVM synthesizes leaf 0x80000021 on older (pre-EPYC) or Intel processors Generic (but affects only RISC-V): - Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: work around QEMU issue with synthetic CPUID leaves Revert "x86/mm: Introduce lookup_address_in_mm()" KVM: x86/mmu: fix potential races when walking host page table KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR KVM: arm64: Inject exception on out-of-IPA-range translation fault KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set KVM: arm64: Handle host stage-2 faults from 32-bit EL0
2022-05-01Merge tag 'x86_urgent_for_v5.18_rc5' of ↵Linus Torvalds13-11/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is solely controlled by the hypervisor - A build fix to make the function prototype (__warn()) as visible as the definition itself - A bunch of objtool annotation fixes which have accumulated over time - An ORC unwinder fix to handle bad input gracefully - Well, we thought the microcode gets loaded in time in order to restore the microcode-emulated MSRs but we thought wrong. So there's a fix for that to have the ordering done properly - Add new Intel model numbers - A spelling fix * tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests bug: Have __warn() prototype defined unconditionally x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config objtool: Use offstr() to print address of missing ENDBR objtool: Print data address for "!ENDBR" data warnings x86/xen: Add ANNOTATE_NOENDBR to startup_xen() x86/uaccess: Add ENDBR to __put_user_nocheck*() x86/retpoline: Add ANNOTATE_NOENDBR for retpolines x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline objtool: Enable unreachable warnings for CLANG LTO x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE x86,objtool: Mark cpu_startup_entry() __noreturn x86,xen,objtool: Add UNWIND hint lib/strn*,objtool: Enforce user_access_begin() rules MAINTAINERS: Add x86 unwinding entry x86/unwind/orc: Recheck address range after stack info was updated x86/cpu: Load microcode during restore_processor_state() x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
2022-05-01Merge tag 'objtool_urgent_for_v5.18_rc5' of ↵Linus Torvalds1-35/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "A bunch of objtool fixes to improve unwinding, sibling call detection, fallthrough detection and relocation handling of weak symbols when the toolchain strips section symbols" * tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix code relocs vs weak symbols objtool: Fix type of reloc::addend objtool: Fix function fallthrough detection for vmlinux objtool: Fix sibling call detection in alternatives objtool: Don't set 'jump_dest' for sibling calls x86/uaccess: Don't jump between functions
2022-04-29KVM: x86: work around QEMU issue with synthetic CPUID leavesPaolo Bonzini1-5/+14
Synthesizing AMD leaves up to 0x80000021 caused problems with QEMU, which assumes the *host* CPUID[0x80000000].EAX is higher or equal to what KVM_GET_SUPPORTED_CPUID reports. This causes QEMU to issue bogus host CPUIDs when preparing the input to KVM_SET_CPUID2. It can even get into an infinite loop, which is only terminated by an abort(): cpuid_data is full, no space for cpuid(eax:0x8000001d,ecx:0x3e) To work around this, only synthesize those leaves if 0x8000001d exists on the host. The synthetic 0x80000021 leaf is mostly useful on Zen2, which satisfies the condition. Fixes: f144c49e8c39 ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29Revert "x86/mm: Introduce lookup_address_in_mm()"Sean Christopherson2-15/+0
Drop lookup_address_in_mm() now that KVM is providing it's own variant of lookup_address_in_pgd() that is safe for use with user addresses, e.g. guards against page tables being torn down. A variant that provides a non-init mm is inherently dangerous and flawed, as the only reason to use an mm other than init_mm is to walk a userspace mapping, and lookup_address_in_pgd() does not play nice with userspace mappings, e.g. doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE() to ensure an upper level entry isn't converted to a huge page between checking the PAGE_SIZE bit and grabbing the address of the next level down. This reverts commit 13c72c060f1ba6f4eddd7b1c4f52a8aded43d6d9. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <YmwIi3bXr/1yhYV/@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29Merge branch 'kvm-fixes-for-5.18-rc5' into HEADPaolo Bonzini5-21/+89
Fixes for (relatively) old bugs, to be merged in both the -rc and next development trees: * Fix potential races when walking host page table * Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT * Fix shadow page table leak when KVM runs nested
2022-04-29KVM: x86/mmu: fix potential races when walking host page tableMingwei Zhang1-5/+42
KVM uses lookup_address_in_mm() to detect the hugepage size that the host uses to map a pfn. The function suffers from several issues: - no usage of READ_ONCE(*). This allows multiple dereference of the same page table entry. The TOCTOU problem because of that may cause KVM to incorrectly treat a newly generated leaf entry as a nonleaf one, and dereference the content by using its pfn value. - the information returned does not match what KVM needs; for non-present entries it returns the level at which the walk was terminated, as long as the entry is not 'none'. KVM needs level information of only 'present' entries, otherwise it may regard a non-present PXE entry as a present large page mapping. - the function is not safe for mappings that can be torn down, because it does not disable IRQs and because it returns a PTE pointer which is never safe to dereference after the function returns. So implement the logic for walking host page tables directly in KVM, and stop using lookup_address_in_mm(). Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220429031757.2042406-1-mizhang@google.com> [Inline in host_pfn_mapping_level, ensure no semantic change for its callers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENTPaolo Bonzini1-0/+2
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags member that at the time was unused. Unfortunately this extensibility mechanism has several issues: - x86 is not writing the member, so it would not be possible to use it on x86 except for new events - the member is not aligned to 64 bits, so the definition of the uAPI struct is incorrect for 32- on 64-bit userspace. This is a problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately usage of flags was only introduced in 5.18. Since padding has to be introduced, place a new field in there that tells if the flags field is valid. To allow further extensibility, in fact, change flags to an array of 16 values, and store how many of the values are valid. The availability of the new ndata field is tied to a system capability; all architectures are changed to fill in the field. To avoid breaking compilation of userspace that was using the flags field, provide a userspace-only union to overlap flags with data[0]. The new field is placed at the same offset for both 32- and 64-bit userspace. Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Message-Id: <20220422103013.34832-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDRSean Christopherson5-16/+45
Disallow memslots and MMIO SPTEs whose gpa range would exceed the host's MAXPHYADDR, i.e. don't create SPTEs for gfns that exceed host.MAXPHYADDR. The TDP MMU bounds its zapping based on host.MAXPHYADDR, and so if the guest, possibly with help from userspace, manages to coerce KVM into creating a SPTE for an "impossible" gfn, KVM will leak the associated shadow pages (page tables): WARNING: CPU: 10 PID: 1122 at arch/x86/kvm/mmu/tdp_mmu.c:57 kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm] Modules linked in: kvm_intel kvm irqbypass CPU: 10 PID: 1122 Comm: set_memory_regi Tainted: G W 5.18.0-rc1+ #293 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2d0 [kvm] kvm_vm_release+0x1d/0x30 [kvm] __fput+0x82/0x240 task_work_run+0x5b/0x90 exit_to_user_mode_prepare+0xd2/0xe0 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> On bare metal, encountering an impossible gpa in the page fault path is well and truly impossible, barring CPU bugs, as the CPU will signal #PF during the gva=>gpa translation (or a similar failure when stuffing a physical address into e.g. the VMCS/VMCB). But if KVM is running as a VM itself, the MAXPHYADDR enumerated to KVM may not be the actual MAXPHYADDR of the underlying hardware, in which case the hardware will not fault on the illegal-from-KVM's-perspective gpa. Alternatively, KVM could continue allowing the dodgy behavior and simply zap the max possible range. But, for hosts with MAXPHYADDR < 52, that's a (minor) waste of cycles, and more importantly, KVM can't reasonably support impossible memslots when running on bare metal (or with an accurate MAXPHYADDR as a VM). Note, limiting the overhead by checking if KVM is running as a guest is not a safe option as the host isn't required to announce itself to the guest in any way, e.g. doesn't need to set the HYPERVISOR CPUID bit. A second alternative to disallowing the memslot behavior would be to disallow creating a VM with guest.MAXPHYADDR > host.MAXPHYADDR. That restriction is undesirable as there are legitimate use cases for doing so, e.g. using the highest host.MAXPHYADDR out of a pool of heterogeneous systems so that VMs can be migrated between hosts with different MAXPHYADDRs without running afoul of the allow_smaller_maxphyaddr mess. Note that any guest.MAXPHYADDR is valid with shadow paging, and it is even useful in order to test KVM with MAXPHYADDR=52 (i.e. without any reserved physical address bits). The now common kvm_mmu_max_gfn() is inclusive instead of exclusive. The memslot and TDP MMU code want an exclusive value, but the name implies the returned value is inclusive, and the MMIO path needs an inclusive check. Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 524a1e4e381f ("KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Ben Gardon <bgardon@google.com> Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220428233416.2446833-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guestsThomas Gleixner1-1/+5
When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI layer. This can lead to a situation where the PCI/MSI layer masks an MSI[-X] interrupt and the hypervisor grants the write despite the fact that it already requested the interrupt. As a consequence interrupt delivery on the affected device is not happening ever. Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests already. Fixes: 809f9267bbab ("xen: map MSIs into pirqs") Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Reported-by: Dusty Mabe <dustymabe@redhat.com> Reported-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Noah Meyerhans <noahm@debian.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
2022-04-24Merge tag 'perf_urgent_for_v5.18_rc4' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Add Sapphire Rapids CPU support - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use) * tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled
2022-04-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-64/+110
Pull kvm fixes from Paolo Bonzini: "The main and larger change here is a workaround for AMD's lack of cache coherency for encrypted-memory guests. I have another patch pending, but it's waiting for review from the architecture maintainers. RISC-V: - Remove 's' & 'u' as valid ISA extension - Do not allow disabling the base extensions 'i'/'m'/'a'/'c' x86: - Fix NMI watchdog in guests on AMD - Fix for SEV cache incoherency issues - Don't re-acquire SRCU lock in complete_emulated_io() - Avoid NULL pointer deref if VM creation fails - Fix race conditions between APICv disabling and vCPU creation - Bugfixes for disabling of APICv - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume selftests: - Do not use bitfields larger than 32-bits, they differ between GCC and clang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: selftests: introduce and use more page size-related constants kvm: selftests: do not use bitfields larger than 32-bits for PTEs KVM: SEV: add cache flush to solve SEV cache incoherency issues KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs KVM: SVM: Simplify and harden helper to flush SEV guest page(s) KVM: selftests: Silence compiler warning in the kvm_page_table_test KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume KVM: SPDX style and spelling fixes KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race KVM: nVMX: Defer APICv updates while L2 is active until L1 is active KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io() RISC-V: KVM: Restrict the extensions that can be disabled RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
2022-04-21KVM: SEV: add cache flush to solve SEV cache incoherency issuesMingwei Zhang6-0/+18
Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: stable@vger.kernel.org Suggested-by: Sean Christpherson <seanjc@google.com> Reported-by: Mingwei Zhang <mizhang@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-4-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUsMingwei Zhang1-3/+6
Use clflush_cache_range() to flush the confidential memory when SME_COHERENT is supported in AMD CPU. Cache flush is still needed since SME_COHERENT only support cache invalidation at CPU side. All confidential cache lines are still incoherent with DMA devices. Cc: stable@vger.kerel.org Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-3-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: SVM: Simplify and harden helper to flush SEV guest page(s)Sean Christopherson1-34/+20
Rework sev_flush_guest_memory() to explicitly handle only a single page, and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails. Per-page flushing is currently used only to flush the VMSA, and in its current form, the helper is completely broken with respect to flushing actual guest memory, i.e. won't work correctly for an arbitrary memory range. VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page walks, i.e. will fault if the address is not present in the host page tables or does not have the correct permissions. Current AMD CPUs also do not honor SMAP overrides (undocumented in kernel versions of the APM), so passing in a userspace address is completely out of the question. In other words, KVM would need to manually walk the host page tables to get the pfn, ensure the pfn is stable, and then use the direct map to invoke VM_PAGE_FLUSH. And the latter might not even work, e.g. if userspace is particularly evil/clever and backs the guest with Secret Memory (which unmaps memory from the direct map). Signed-off-by: Sean Christopherson <seanjc@google.com> Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reported-by: Mingwei Zhang <mizhang@google.com> Cc: stable@vger.kernel.org Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-2-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdogLike Xu3-6/+12
NMI-watchdog is one of the favorite features of kernel developers, but it does not work in AMD guest even with vPMU enabled and worse, the system misrepresents this capability via /proc. This is a PMC emulation error. KVM does not pass the latest valid value to perf_event in time when guest NMI-watchdog is running, thus the perf_event corresponding to the watchdog counter will enter the old state at some point after the first guest NMI injection, forcing the hardware register PMC0 to be constantly written to 0x800000000001. Meanwhile, the running counter should accurately reflect its new value based on the latest coordinated pmc->counter (from vPMC's point of view) rather than the value written directly by the guest. Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr") Reported-by: Dongli Cao <caodongli@kingsoft.com> Signed-off-by: Like Xu <likexu@tencent.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20220409015226.38619-1-likexu@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resumeWanpeng Li1-0/+13
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to host-side polling after suspend/resume. Non-bootstrap CPUs are restored correctly by the haltpoll driver because they are hot-unplugged during suspend and hot-plugged during resume; however, the BSP is not hotpluggable and remains in host-sde polling mode after the guest resume. The makes the guest pay for the cost of vmexits every time the guest enters idle. Fix it by recording BSP's haltpoll state and resuming it during guest resume. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabledSean Christopherson1-0/+3
Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is disabled at the module level to avoid having to acquire the mutex and potentially process all vCPUs. The DISABLE inhibit will (barring bugs) never be lifted, so piling on more inhibits is unnecessary. Fixes: cae72dcc3b21 ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a raceSean Christopherson1-1/+14
Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an in-kernel local APIC and APICv enabled at the module level. Consuming kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens before the vCPU is fully onlined, i.e. it won't get the request made to "all" vCPUs. If APICv is globally inhibited between setting apicv_active and onlining the vCPU, the vCPU will end up running with APICv enabled and trigger KVM's sanity check. Mark APICv as active during vCPU creation if APICv is enabled at the module level, both to be optimistic about it's final state, e.g. to avoid additional VMWRITEs on VMX, and because there are likely bugs lurking since KVM checks apicv_active in multiple vCPU creation paths. While keeping the current behavior of consuming kvm_apicv_activated() is arguably safer from a regression perspective, force apicv_active so that vCPU creation runs with deterministic state and so that if there are bugs, they are found sooner than later, i.e. not when some crazy race condition is hit. WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Modules linked in: CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014 RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Call Trace: <TASK> vcpu_run arch/x86/kvm/x86.c:10039 [inline] kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234 kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a call to KVM_SET_GUEST_DEBUG. r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async) r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async) r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002) ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5}) ioctl$KVM_RUN(r2, 0xae80, 0x0) Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: nVMX: Defer APICv updates while L2 is active until L1 is activeSean Christopherson3-0/+11
Defer APICv updates that occur while L2 is active until nested VM-Exit, i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1 is active and (a) stomps all over vmcs02 and (b) neglects to ever updated vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv becomes unhibited while L2 is active, KVM will set various APICv controls in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless running with nested_early_check=1, KVM blames L1 and chaos ensues. In all cases, ignoring vmcs02 and always deferring the inhibition change to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE inhibitions cannot truly change while L2 is active (see below). IRQ_BLOCKING can change, but it is firmly a best effort debug feature. Furthermore, only L2's APIC is accelerated/virtualized to the full extent possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR interception will apply to the virtual APIC managed by KVM. The exception is the SELF_IPI register when x2APIC is enabled, but that's an acceptable hole. Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the MSRs to L2, but for that to work in any sane capacity, L1 would need to pass through IRQs to L2 as well, and IRQs must be intercepted to enable virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling VID for L2 are, for all intents and purposes, mutually exclusive. Lack of dynamic toggling is also why this scenario is all but impossible to encounter in KVM's current form. But a future patch will pend an APICv update request _during_ vCPU creation to plug a race where a vCPU that's being created doesn't get included in the "all vCPUs request" because it's not yet visible to other vCPUs. If userspaces restores L2 after VM creation (hello, KVM selftests), the first KVM_RUN will occur while L2 is active and thus service the APICv update request made during VM creation. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220420013732.3308816-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabledSean Christopherson1-1/+1
Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via module param. A recent refactoring to add a wrapper for setting/clearing inhibits unintentionally changed the flag, probably due to a copy+paste goof. Fixes: 4f4c4a3ee53c ("KVM: x86: Trace all APICv inhibit changes and capture overall status") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abusedSean Christopherson1-15/+13
Add wrappers to acquire/release KVM's SRCU lock when stashing the index in vcpu->src_idx, along with rudimentary detection of illegal usage, e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the SRCU index is (currently) either 0 or 1, illegal nesting bugs can go unnoticed for quite some time and only cause problems when the nested lock happens to get a different index. Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will likely yell so loudly that it will bring the kernel to its knees. Signed-off-by: Sean Christopherson <seanjc@google.com> Tested-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220415004343.2203171-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()Sean Christopherson1-6/+1
Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively leak a lock and hang if/when synchronize_srcu() is invoked for the relevant grace period. Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220415004343.2203171-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20x86: __memcpy_flushcache: fix wrong alignment if size > 2^32Mikulas Patocka1-1/+1
The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB. The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior. For example: suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1; so we copy just one byte "and" dest remains unaligned. This patch fixes the bug by replacing unsigned with size_t. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-19x86/uaccess: Don't jump between functionsJosh Poimboeuf1-35/+52
For unwinding sanity, a function shouldn't jump to the middle of another function. Move the short string user copy code out to a separate non-function code snippet. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/9519e4853148b765e047967708f2b61e56c93186.1649718562.git.jpoimboe@redhat.com
2022-04-19x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT configNur Hussein1-1/+1
There is only one m in becoming. Signed-off-by: Nur Hussein <hussein@unixcat.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220417192454.10247-1-hussein@unixcat.org
2022-04-19x86/xen: Add ANNOTATE_NOENDBR to startup_xen()Josh Poimboeuf1-0/+1
The startup_xen() kernel entry point is referenced by the ".note.Xen" section, and is the real entry point of the VM. Control transfer is through IRET, which *could* set NEED_ENDBR, however Xen currently does no such thing. Add ANNOTATE_NOENDBR to silence future objtool warnings. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Link: https://lkml.kernel.org/r/a87bd48b06d11ec4b98122a429e71e489b4e48c3.1650300597.git.jpoimboe@redhat.com
2022-04-19x86/uaccess: Add ENDBR to __put_user_nocheck*()Josh Poimboeuf1-0/+4
The __put_user_nocheck*() inner labels are exported, so in keeping with the "allow exported functions to be indirectly called" policy, add ENDBR. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/207f02177a23031091d1a608de6049a9e5e8ff80.1650300597.git.jpoimboe@redhat.com
2022-04-19x86/retpoline: Add ANNOTATE_NOENDBR for retpolinesJosh Poimboeuf1-1/+1
The retpolines are exported, so they're referenced by ksymtab sections. But they're never indirect-branched to, so add ANNOTATE_NOENDBR. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b6ec963dfd9301b6b1d74ef7758fcb0b540d6c6c.1650300597.git.jpoimboe@redhat.com
2022-04-19x86/static_call: Add ANNOTATE_NOENDBR to static call trampolineJosh Poimboeuf1-0/+1
The static call trampoline is never indirect-branched to, but is referenced by the static call key. Add ANNOTATE_NOENDBR. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1b5b54aad7d81241dabe5e0c9b40dea64b540b00.1650300597.git.jpoimboe@redhat.com
2022-04-19x86,objtool: Explicitly mark idtentry_body()s tail REACHABLEPeter Zijlstra1-0/+3
Objtool can figure out that some \cfunc()s are noreturn and then complains about certain instances having unreachable tails: vmlinux.o: warning: objtool: asm_exc_xen_unknown_trap()+0x16: unreachable instruction Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220408094718.441854969@infradead.org
2022-04-19x86,xen,objtool: Add UNWIND hintPeter Zijlstra1-0/+1
SYM_CODE_START*() doesn't get auto-validated and needs an UNWIND hint to get checked, add one. vmlinux.o: warning: objtool: pvh_start_xen()+0x0: unreachable Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220408094718.321246297@infradead.org
2022-04-19x86/unwind/orc: Recheck address range after stack info was updatedDmitry Monakhov1-4/+4
A crash was observed in the ORC unwinder: BUG: stack guard page was hit at 000000000dd984a2 (stack is 00000000d1caafca..00000000613712f0) kernel stack overflow (page fault): 0000 [#1] SMP NOPTI CPU: 93 PID: 23787 Comm: context_switch1 Not tainted 5.4.145 #1 RIP: 0010:unwind_next_frame Call Trace: <NMI> perf_callchain_kernel get_perf_callchain perf_callchain perf_prepare_sample perf_event_output_forward __perf_event_overflow perf_ibs_handle_irq perf_ibs_nmi_handler nmi_handle default_do_nmi do_nmi end_repeat_nmi This was really two bugs: 1) The perf IBS code passed inconsistent regs to the unwinder. 2) The unwinder didn't handle the bad input gracefully. Fix the latter bug. The ORC unwinder needs to be immune against bad inputs. The problem is that stack_access_ok() doesn't recheck the validity of the full range of registers after switching to the next valid stack with get_stack_info(). Fix that. [ jpoimboe: rewrote commit log ] Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/1650353656-956624-1-git-send-email-dmtrmonakhov@yandex-team.ru Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2022-04-19perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU supportZhang Rui1-3/+4
From the perspective of Intel cstate residency counters, SAPPHIRERAPIDS_X is the same as ICELAKE_X. Share the code with it. And update the comments for SAPPHIRERAPIDS_X. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lkml.kernel.org/r/20220415104520.2737004-1-rui.zhang@intel.com
2022-04-19x86/cpu: Load microcode during restore_processor_state()Borislav Petkov3-4/+14
When resuming from system sleep state, restore_processor_state() restores the boot CPU MSRs. These MSRs could be emulated by microcode. If microcode is not loaded yet, writing to emulated MSRs leads to unchecked MSR access error: ... PM: Calling lapic_suspend+0x0/0x210 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr) Call Trace: <TASK> ? restore_processor_state x86_acpi_suspend_lowlevel acpi_suspend_enter suspend_devices_and_enter pm_suspend.cold state_store kobj_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write __x64_sys_write do_syscall_64 entry_SYSCALL_64_after_hwframe RIP: 0033:0x7fda13c260a7 To ensure microcode emulated MSRs are available for restoration, load the microcode on the boot CPU before restoring these MSRs. [ Pawan: write commit message and productize it. ] Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume") Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841 Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
2022-04-19x86/cpu: Add new Alderlake and Raptorlake CPU model numbersTony Luck1-0/+3
Intel is subdividing the mobile segment with additional models with the same codename. Using the Intel "N" and "P" suffices for these will be less confusing than trying to map to some different naming convention. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/YlS7n7Xtso9BXZA2@agluck-desk3.sc.intel.com
2022-04-17Merge tag 'x86-urgent-2022-04-17' of ↵Linus Torvalds5-22/+100
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two x86 fixes related to TSX: - Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX to cover all CPUs which allow to disable it. - Disable TSX development mode at boot so that a microcode update which provides TSX development mode does not suddenly make the system vulnerable to TSX Asynchronous Abort" * tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsx: Disable TSX development mode at boot x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
2022-04-15mm/vmalloc: fix spinning drain_vmap_work after reading from /proc/vmcoreOmar Sandoval2-3/+0
Commit 3ee48b6af49c ("mm, x86: Saving vmcore with non-lazy freeing of vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to lazy_max_pages() + 1, ensuring that any future vunmaps() immediately purge the vmap areas instead of doing it lazily. Commit 690467c81b1a ("mm/vmalloc: Move draining areas out of caller context") moved the purging from the vunmap() caller to a worker thread. Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin (possibly forever). For example, consider the following scenario: 1. Thread reads from /proc/vmcore. This eventually calls __copy_oldmem_page() -> set_iounmap_nonlazy(), which sets vmap_lazy_nr to lazy_max_pages() + 1. 2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2 pages (one page plus the guard page) to the purge list and vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the drain_vmap_work is scheduled. 3. Thread returns from the kernel and is scheduled out. 4. Worker thread is scheduled in and calls drain_vmap_area_work(). It frees the 2 pages on the purge list. vmap_lazy_nr is now lazy_max_pages() + 1. 5. This is still over the threshold, so it tries to purge areas again, but doesn't find anything. 6. Repeat 5. If the system is running with only one CPU (which is typicial for kdump) and preemption is disabled, then this will never make forward progress: there aren't any more pages to purge, so it hangs. If there is more than one CPU or preemption is enabled, then the worker thread will spin forever in the background. (Note that if there were already pages to be purged at the time that set_iounmap_nonlazy() was called, this bug is avoided.) This can be reproduced with anything that reads from /proc/vmcore multiple times. E.g., vmcore-dmesg /proc/vmcore. It turns out that improvements to vmap() over the years have obsoleted the need for this "optimization". I benchmarked `dd if=/proc/vmcore of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore. The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and 5.18-rc1 with set_iounmap_nonlazy() removed entirely: |5.17 |5.18+fix|5.18+removal 4k|40.86s| 40.09s| 26.73s 1M|24.47s| 23.98s| 21.84s The removal was the fastest (by a wide margin with 4k reads). This patch removes set_iounmap_nonlazy(). Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com Fixes: 690467c81b1a ("mm/vmalloc: Move draining areas out of caller context") Signed-off-by: Omar Sandoval <osandov@fb.com> Acked-by: Chris Down <chris@chrisdown.name> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-50/+57
Pull kvm fixes from Paolo Bonzini: "x86: - Miscellaneous bugfixes - A small cleanup for the new workqueue code - Documentation syntax fix RISC-V: - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c ARM: - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits) KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU KVM: SVM: Do not activate AVIC for SEV-enabled guest Documentation: KVM: Add SPDX-License-Identifier tag selftests: kvm: add tsc_scaling_sync to .gitignore RISC-V: KVM: include missing hwcap.h into vcpu_fp KVM: selftests: riscv: Fix alignment of the guest_hang() function KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put() selftests: KVM: Free the GIC FD when cleaning up in arch_timer selftests: KVM: Don't leak GIC FD across dirty log test iterations KVM: Don't create VM debugfs files outside of the VM directory KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3) KVM: avoid NULL pointer dereference in kvm_dirty_ring_push KVM: arm64: selftests: Introduce vcpu_width_config KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs KVM: arm64: vgic: Remove unnecessary type castings KVM: arm64: Don't split hugepages outside of MMU write lock KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32 KVM: arm64: Generally disallow SMC64 for AArch32 guests ...
2022-04-12stat: fix inconsistency between struct stat and struct compat_statMikulas Patocka1-4/+2
struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit st_dev and st_rdev; struct compat_stat (defined in arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by a 16-bit padding. This patch fixes struct compat_stat to match struct stat. [ Historical note: the old x86 'struct stat' did have that 16-bit field that the compat layer had kept around, but it was changes back in 2003 by "struct stat - support larger dev_t": https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d and back in those days, the x86_64 port was still new, and separate from the i386 code, and had already picked up the old version with a 16-bit st_dev field ] Note that we can't change compat_dev_t because it is used by compat_loop_info. Also, if the st_dev and st_rdev values are 32-bit, we don't have to use old_valid_dev to test if the value fits into them. This fixes -EOVERFLOW on filesystems that are on NVMe because NVMe uses the major number 259. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-11KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPUVitaly Kuznetsov4-40/+13
The following WARN is triggered from kvm_vm_ioctl_set_clock(): WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20 Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021 RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... Call Trace: <TASK> ? kvm_write_guest+0x114/0x120 [kvm] kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm] kvm_arch_vm_ioctl+0xa26/0xc50 [kvm] ? schedule+0x4e/0xc0 ? __cond_resched+0x1a/0x50 ? futex_wait+0x166/0x250 ? __send_signal+0x1f1/0x3d0 kvm_vm_ioctl+0x747/0xda0 [kvm] ... The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if mark_page_dirty() is called without an active vCPU") but the change seems to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's no real need to actually write to guest memory to invalidate TSC page, this can be done by the first vCPU which goes through kvm_guest_time_update(). Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
2022-04-11KVM: SVM: Do not activate AVIC for SEV-enabled guestSuravee Suthikulpanit3-1/+5
Since current AVIC implementation cannot support encrypted memory, inhibit AVIC for SEV-enabled guest. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11x86/tsx: Disable TSX development mode at bootPawan Gupta5-16/+53
A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-11x86/tsx: Use MSR_TSX_CTRL to clear CPUID bitsPawan Gupta2-7/+48
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use MSR_IA32_TSX_CTRL when supported. [ bp: Document how and why TSX gets disabled. ] Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds5-52/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-10Merge tag 'perf_urgent_for_v5.18_rc2' of ↵Linus Torvalds6-12/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - A couple of fixes to cgroup-related handling of perf events - A couple of fixes to event encoding on Sapphire Rapids - Pass event caps of inherited events so that perf doesn't fail wrongly at fork() - Add support for a new Raptor Lake CPU * tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Always set cpuctx cgrp when enable cgroup event perf/core: Fix perf_cgroup_switch() perf/core: Use perf_cgroup_info->active to check if cgroup is active perf/core: Don't pass task around when ctx sched in perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids perf/x86/intel: Don't extend the pseudo-encoding to GP counters perf/core: Inherit event_caps perf/x86/uncore: Add Raptor Lake uncore support perf/x86/msr: Add Raptor Lake CPU support perf/x86/cstate: Add Raptor Lake support perf/x86: Add Intel Raptor Lake support
2022-04-10Merge tag 'locking_urgent_for_v5.18_rc2' of ↵Linus Torvalds3-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Allow the compiler to optimize away unused percpu accesses and change the local_lock_* macros back to inline functions - A couple of fixes to static call insn patching * tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "mm/page_alloc: mark pagesets as __maybe_unused" Revert "locking/local_lock: Make the empty local_lock_*() function a macro." x86/percpu: Remove volatile from arch_raw_cpu_ptr(). static_call: Remove __DEFINE_STATIC_CALL macro static_call: Properly initialise DEFINE_STATIC_CALL_RET0() static_call: Don't make __static_call_return0 static x86,static_call: Fix __static_call_return0 for i386
2022-04-07x86/msi: Fix msi message data shadow structReto Buerki1-8/+11
The x86 MSI message data is 32 bits in total and is either in compatibility or remappable format, see Intel Virtualization Technology for Directed I/O, section 5.1.2. Fixes: 6285aa50736 ("x86/msi: Provide msi message shadow structs") Co-developed-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Reto Buerki <reet@codelabs.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220407110647.67372-1-reet@codelabs.ch
2022-04-07x86/extable: Prefer local labels in .set directivesNick Desaulniers1-10/+10
Bernardo reported an error that Nathan bisected down to (x86_64) defconfig+LTO_CLANG_FULL+X86_PMEM_LEGACY. LTO vmlinux.o ld.lld: error: <instantiation>:1:13: redefinition of 'found' .set found, 0 ^ <inline asm>:29:1: while in macro instantiation extable_type_reg reg=%eax, type=(17 | ((0) << 16)) ^ This appears to be another LTO specific issue similar to what was folded into commit 4b5305decc84 ("x86/extable: Extend extable functionality"), where the `.set found, 0` in DEFINE_EXTABLE_TYPE_REG in arch/x86/include/asm/asm.h conflicts with the symbol for the static function `found` in arch/x86/kernel/pmem.c. Assembler .set directive declare symbols with global visibility, so the assembler may not rename such symbols in the event of a conflict. LTO could rename static functions if there was a conflict in C sources, but it cannot see into symbols defined in inline asm. The symbols are also retained in the symbol table, regardless of LTO. Give the symbols .L prefixes making them locally visible, so that they may be renamed for LTO to avoid conflicts, and to drop them from the symbol table regardless of LTO. Fixes: 4b5305decc84 ("x86/extable: Extend extable functionality") Reported-by: Bernardo Meurer Costa <beme@google.com> Debugged-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220329202148.2379697-1-ndesaulniers@google.com
2022-04-07x86,bpf: Avoid IBT objtool warningPeter Zijlstra1-0/+1
Clang can inline emit_indirect_jump() and then folds constants, which results in: | vmlinux.o: warning: objtool: emit_bpf_dispatcher()+0x6a4: relocation to !ENDBR: .text.__x86.indirect_thunk+0x40 | vmlinux.o: warning: objtool: emit_bpf_dispatcher()+0x67d: relocation to !ENDBR: .text.__x86.indirect_thunk+0x40 | vmlinux.o: warning: objtool: emit_bpf_tail_call_indirect()+0x386: relocation to !ENDBR: .text.__x86.indirect_thunk+0x20 | vmlinux.o: warning: objtool: emit_bpf_tail_call_indirect()+0x35d: relocation to !ENDBR: .text.__x86.indirect_thunk+0x20 Suppress the optimization such that it must emit a code reference to the __x86_indirect_thunk_array[] base. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lkml.kernel.org/r/20220405075531.GB30877@worktop.programming.kicks-ass.net