summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2018-02-27Broken, but working, ptregs system call conversion for x86-64WIP-syscallLinus Torvalds8-733/+727
Not-yet-signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-26x86: don't pointlessly reload the system call numberLinus Torvalds2-7/+8
We have it in a register in the low-level asm, just pass it in as an argument rather than have do_syscall_64() load it back in from the ptregs pointer. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-26x86: avoid per-cpu system call trampolineLinus Torvalds6-91/+17
The per-cpu system call trampoline was a clever trick, and allows us to have percpu data even before swapgs is done by just doing %rip-relative addressing. And that was important, because syscall doesn't have a kernel stack, so we needed that percpu data very very early, just to get a temporary register to switch the page tables around. However, it turns out to be unnecessary. Because we actually have a temporary register that we can use: %r11 is destroyed by the 'syscall' instruction anyway. Ok, technically it contains the user mode flags register, but we *have* that information anyway: it's still in %rflags, we've just masked off a few unimportant bits. We'll destroy the rest too when we do the "and" of the CR3 value, but who cares? It's a system call. Btw, there are a few bits in eflags that might matter to user space: DF and AC. Right now this clears them, but that is fixable by just changing the MSR_SYSCALL_MASK value to not include them, and clearing them by hand the way we do for all other kernel entry points anyway. So the only _real_ flags we'd destroy are IF and the arithmetic flags that get trampled on by the arithmetic instructions that are part of the %cr3 reload logic. However, if we really end up caring, we can save off even those: we'd take advantage of the fact that %rcx - which contains the returning IP of the system call - also has 8 bits free. Why 8? Even with 5-level paging, we only have 57 bits of virtual address space, and the high address space is for the kernel (and vsyscall, but we'd just disable native vsyscall). So the %rip value saved in %rcx can have only 56 valid bits, which means that we have 8 bits free. So *if* we care about IF and the arithmetic flags being saved over a system call, we'd do: shlq $8,%rcx movb %r11b,%cl shrl $8,%r11d andl $8,%r11d orb %r11b,%cl to save those bits off before we then user %r11 as a temporary register (we'd obviously need to then undo that as we save the user space state on the stack). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-26Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds35-258/+438
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Yet another pile of melted spectrum related changes: - sanitize the array_index_nospec protection mechanism: Remove the overengineered array_index_nospec_mask_check() magic and allow const-qualified types as index to avoid temporary storage in a non-const local variable. - make the microcode loader more robust by properly propagating error codes. Provide information about new feature bits after micro code was updated so administrators can act upon. - optimizations of the entry ASM code which reduce code footprint and make the code simpler and faster. - fix the {pmd,pud}_{set,clear}_flags() implementations to work properly on paravirt kernels by removing the address translation operations. - revert the harmful vmexit_fill_RSB() optimization - use IBRS around firmware calls - teach objtool about retpolines and add annotations for indirect jumps and calls. - explicitly disable jumplabel patching in __init code and handle patching failures properly instead of silently ignoring them. - remove indirect paravirt calls for writing the speculation control MSR as these calls are obviously proving the same attack vector which is tried to be mitigated. - a few small fixes which address build issues with recent compiler and assembler versions" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely() KVM/x86: Remove indirect MSR op calls from SPEC_CTRL objtool, retpolines: Integrate objtool with retpoline support more closely x86/entry/64: Simplify ENCODE_FRAME_POINTER extable: Make init_kernel_text() global jump_label: Warn on failed jump_label patching attempt jump_label: Explicitly disable jump labels in __init code x86/entry/64: Open-code switch_to_thread_stack() x86/entry/64: Move ASM_CLAC to interrupt_entry() x86/entry/64: Remove 'interrupt' macro x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry() x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP objtool: Add module specific retpoline rules objtool: Add retpoline validation objtool: Use existing global variables for options x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute() x86/boot, objtool: Annotate indirect jump in secondary_startup_64() x86/paravirt, objtool: Annotate indirect calls ...
2018-02-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-34/+50
Pull KVM fixes from Paolo Bonzini: "s390: - optimization for the exitless interrupt support that was merged in 4.16-rc1 - improve the branch prediction blocking for nested KVM - replace some jump tables with switch statements to improve expoline performance - fixes for multiple epoch facility ARM: - fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs - make sure we can build 32-bit KVM/ARM with gcc-8. x86: - fixes for AMD SEV - fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup - fixes for async page fault migration - small optimization to PV TLB flush (new in 4.16-rc1) - syzkaller fixes Generic: - compiler warning fixes - syzkaller fixes - more improvements to the kvm_stat tool Two more small Spectre fixes are going to reach you via Ingo" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits) KVM: SVM: Fix SEV LAUNCH_SECRET command KVM: SVM: install RSM intercept KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command include: psp-sev: Capitalize invalid length enum crypto: ccp: Fix sparse, use plain integer as NULL pointer KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled x86/kvm: Make parse_no_xxx __init for kvm KVM: x86: fix backward migration with async_PF kvm: fix warning for non-x86 builds kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds tools/kvm_stat: print 'Total' line for multiple events only tools/kvm_stat: group child events indented after parent tools/kvm_stat: separate drilldown and fields filtering tools/kvm_stat: eliminate extra guest/pid selection dialog tools/kvm_stat: mark private methods as such tools/kvm_stat: fix debugfs handling tools/kvm_stat: print error on invalid regex tools/kvm_stat: fix crash when filtering out all non-child trace events tools/kvm_stat: avoid 'is' for equality checks tools/kvm_stat: use a more pythonic way to iterate over dictionaries ...
2018-02-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds4-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes: - UAPI data type correction for hyperv - correct the cpu cores field in /proc/cpuinfo on CPU hotplug - return proper error code in the resctrl file system failure path to avoid silent subsequent failures - correct a subtle accounting issue in the new vector allocation code which went unnoticed for a while and caused suspend/resume failures" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations x86/topology: Fix function name in documentation x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system x86/apic/vector: Handle vector release on CPU unplug correctly genirq/matrix: Handle CPU offlining proper x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
2018-02-25Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single commit which shuts up a bogus GCC-8 warning" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
2018-02-25Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cleanup patchlet from Thomas Gleixner: "A single commit removing a bunch of bogus double semicolons all over the tree" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide/trivial: Remove ';;$' typo noise
2018-02-24KVM: SVM: Fix SEV LAUNCH_SECRET commandBrijesh Singh1-3/+7
The SEV LAUNCH_SECRET command fails with error code 'invalid param' because we missed filling the guest and header system physical address while issuing the command. Fixes: 9f5b5b950aa9 (KVM: SVM: Add support for SEV LAUNCH_SECRET command) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-kernel@vger.kernel.org Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: SVM: install RSM interceptBrijesh Singh1-1/+10
RSM instruction is used by the SMM handler to return from SMM mode. Currently, rsm causes a #UD - which results in instruction fetch, decode, and emulate. By installing the RSM intercept we can avoid the instruction fetch since we know that #VMEXIT was due to rsm. The patch is required for the SEV guest, because in case of SEV guest memory is encrypted with guest-specific key and hypervisor will not able to fetch the instruction bytes from the guest memory. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE commandBrijesh Singh1-9/+7
Using the access_ok() to validate the input before issuing the SEV command does not buy us anything in this case. If userland is giving us a garbage pointer then copy_to_user() will catch it when we try to return the measurement. Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Fixes: 0d0736f76347 (KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE ...) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-kernel@vger.kernel.org Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is ↵Wanpeng Li1-2/+4
disabled Avoid traversing all the cpus for pv tlb flush when steal time is disabled since pv tlb flush depends on the field in steal time for shared data. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24x86/kvm: Make parse_no_xxx __init for kvmDou Liyang1-3/+3
The early_param() is only called during kernel initialization, So Linux marks the functions of it with __init macro to save memory. But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall, So, Make them __init as well. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: rkrcmar@redhat.com Cc: kvm@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: x86@kernel.org Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: x86: fix backward migration with async_PFRadim Krčmář3-5/+7
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT bit when enabling async_PF, but this bit is reserved on old hypervisors, which results in a failure upon migration. To avoid breaking different cases, we are checking for CPUID feature bit before enabling the feature and nothing else. Fixes: 52a5c155cf79 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode") Cc: <stable@vger.kernel.org> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24kvm: fix warning for non-x86 buildsSebastian Ott1-3/+0
Fix the following sparse warning by moving the prototype of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h . CHECK arch/s390/kvm/../../../virt/kvm/kvm_main.c arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: X86: Fix SMRAM accessing even if VM is shutdownWanpeng Li1-1/+1
Reported by syzkaller: WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel] CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4 RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel] Call Trace: vmx_handle_exit+0xbd/0xe20 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm] kvm_vcpu_ioctl+0x3e9/0x720 [kvm] do_vfs_ioctl+0xa4/0x6a0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x25/0x9c The testcase creates a first thread to issue KVM_SMI ioctl, and then creates a second thread to mmap and operate on the same vCPU. This triggers a race condition when running the testcase with multiple threads. Sometimes one thread exits with a triple fault while another thread mmaps and operates on the same vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE in kvm_handle_bad_page(), which will go on to cause an emulation failure and an exit with KVM_EXIT_INTERNAL_ERROR. Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: nVMX: Don't halt vcpu when L1 is injecting events to L2Chao Gao1-1/+6
Although L2 is in halt state, it will be in the active state after VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity State. Halting the vcpu here means the event won't be injected to L2 and this decision isn't reported to L1. Thus L0 drops an event that should be injected to L2. Cc: Liran Alon <liran.alon@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Chao Gao <chao.gao@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM/x86: remove WARN_ON() for when vm_munmap() failsEric Biggers1-4/+2
On x86, special KVM memslots such as the TSS region have anonymous memory mappings created on behalf of userspace, and these mappings are removed when the VM is destroyed. It is however possible for removing these mappings via vm_munmap() to fail. This can most easily happen if the thread receives SIGKILL while it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)' in __x86_set_memory_region(). syzkaller was able to hit this, using 'exit()' to send the SIGKILL. Note that while the vm_munmap() failure results in the mapping not being removed immediately, it is not leaked forever but rather will be freed when the process exits. It's not really possible to handle this failure properly, so almost every other caller of vm_munmap() doesn't check the return value. It's a limitation of having the kernel manage these mappings rather than userspace. So just remove the WARN_ON() so that users can't spam the kernel log with this warning. Fixes: f0d648bdf0a5 ("KVM: x86: map/unmap private slots in __x86_set_memory_region") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-24KVM: nVMX: preserve SECONDARY_EXEC_DESC without UMIPRadim Krčmář1-1/+2
L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS bit if UMIP is not being emulated. We must still set the bit when emulating UMIP as the feature can be passed to L2 where L0 will do the emulation and because L2 can change CR4 without a VM exit, we should clear the bit if UMIP is disabled. Fixes: 0367f205a3b7 ("KVM: vmx: add support for emulating UMIP") Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-24KVM: x86: move LAPIC initialization after VMCS creationPaolo Bonzini2-1/+1
The initial reset of the local APIC is performed before the VMCS has been created, but it tries to do a vmwrite: vmwrite error: reg 810 value 4a00 (err 18944) CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1 Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014 Call Trace: vmx_set_rvi [kvm_intel] vmx_hwapic_irr_update [kvm_intel] kvm_lapic_reset [kvm] kvm_create_lapic [kvm] kvm_arch_vcpu_init [kvm] kvm_vcpu_init [kvm] vmx_create_vcpu [kvm_intel] kvm_vm_ioctl [kvm] Move it later, after the VMCS has been created. Fixes: 4191db26b714 ("KVM: x86: Update APICv on APIC reset") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-4/+42
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
2018-02-23x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across ↵Samuel Neves1-0/+1
CPU hotplug operations Without this fix, /proc/cpuinfo will display an incorrect amount of CPU cores, after bringing them offline and online again, as exemplified below: $ cat /proc/cpuinfo | grep cores cpu cores : 4 cpu cores : 8 cpu cores : 8 cpu cores : 20 cpu cores : 4 cpu cores : 3 cpu cores : 2 cpu cores : 2 This patch fixes this by always zeroing the booted_cores variable upon turning off a logical CPU. Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jgross@suse.com Cc: luto@kernel.org Cc: prarit@redhat.com Cc: vkuznets@redhat.com Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR ↵Paolo Bonzini2-2/+2
path as unlikely() vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving branch hints to the compiler can actually make a substantial cycle difference by keeping the fast path contiguous in memory. With this optimization, the retpoline-guest/retpoline-host case is about 50 cycles faster. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23KVM/x86: Remove indirect MSR op calls from SPEC_CTRLPaolo Bonzini2-6/+8
Having a paravirt indirect call in the IBRS restore path is not a good idea, since we are trying to protect from speculative execution of bogus indirect branch targets. It is also slower, so use native_wrmsrl() on the vmentry path too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/intel_rdt: Fix incorrect returned value when creating rdgroup ↵Wang Hui1-0/+1
sub-directory in resctrl file system If no monitoring feature is detected because all monitoring features are disabled during boot time or there is no monitoring feature in hardware, creating rdtgroup sub-directory by "mkdir" command reports error: mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory But the sub-directory actually is generated and content is correct: cpus cpus_list schemata tasks The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after the sub-directory is created and the returned value is reported as an error to user. Clear the returned value to report to user that the sub-directory is actually created successfully. Signed-off-by: Wang Hui <john.wanghui@huawei.com> Signed-off-by: Zhang Yanfei <yanfei.zhang@huawei.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vikas <vikas.shivappa@intel.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/apic/vector: Handle vector release on CPU unplug correctlyThomas Gleixner1-3/+22
When a irq vector is replaced, then the previous vector is normally released when the first interrupt happens on the new vector. If the target CPU of the previous vector is already offline when the new vector is installed, then the previous vector is silently discarded, which leads to accounting issues causing suspend failures and other problems. Adjust the logic so that the previous vector is freed in the underlying matrix allocator to ensure that the accounting stays correct. Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22bpf, x64: implement retpoline for tail callDaniel Borkmann2-4/+42
Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-22x86: Treat R_X86_64_PLT32 as R_X86_64_PC32H.J. Lu3-0/+5
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared objects must use PIC PLT. To use PIC PLT, you need to load _GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on x86-64 since x86-64 uses PC-relative PLT. On x86-64, for 32-bit PC-relative branches, we can generate PLT32 relocation, instead of PC32 relocation, which can also be used as a marker for 32-bit PC-relative branches. Linker can always reduce PLT32 relocation to PC32 if function is defined locally. Local functions should use PC32 relocation. As far as Linux kernel is concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since Linux kernel doesn't use PLT. R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in binutils master branch which will become binutils 2.31. [ hjl is working on having better documentation on this all, but a few more notes from him: "PLT32 relocation is used as marker for PC-relative branches. Because of EBX, it looks odd to generate PLT32 relocation on i386 when EBX doesn't have GOT. As for symbol resolution, PLT32 and PC32 relocations are almost interchangeable. But when linker sees PLT32 relocation against a protected symbol, it can resolved locally at link-time since it is used on a branch instruction. Linker can't do that for PC32 relocation" but for the kernel use, the two are basically the same, and this commit gets things building and working with the current binutils master - Linus ] Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar1-2/+2
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool, retpolines: Integrate objtool with retpoline support more closelyPeter Zijlstra2-7/+4
Disable retpoline validation in objtool if your compiler sucks, and otherwise select the validation stuff for CONFIG_RETPOLINE=y (most builds would already have it set due to ORC). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Simplify ENCODE_FRAME_POINTERJosh Poimboeuf1-6/+1
On 64-bit, the stack pointer is always aligned on interrupt, so instead of setting the LSB of the pt_regs address, we can just add 1 to it. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180221024214.lhl5jfgw33c4vz3m@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21extable: Make init_kernel_text() globalJosh Poimboeuf1-2/+1
Convert init_kernel_text() to a global function and use it in a few places instead of manually comparing _sinittext and _einittext. Note that kallsyms.h has a very similar function called is_kernel_inittext(), but its end check is inclusive. I'm not sure whether that's intentional behavior, so I didn't touch it. Suggested-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4335d02be8d45ca7d265d2f174251d0b7ee6c5fd.1519051220.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Open-code switch_to_thread_stack()Dominik Brodowski2-38/+55
Open-code the two instances which called switch_to_thread_stack(). This allows us to remove the wrapper around DO_SWITCH_TO_THREAD_STACK. While at it, update the UNWIND hint to reflect where the IRET frame is, and update the commentary to reflect what we are actually doing here. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-7-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move ASM_CLAC to interrupt_entry()Dominik Brodowski1-2/+1
Moving ASM_CLAC to interrupt_entry means two instructions (addq / pushq and call interrupt_entry) are not covered by it. However, it offers a noticeable size reduction (-.2k): text data bss dec hex filename 16882 0 0 16882 41f2 entry_64.o-orig 16623 0 0 16623 40ef entry_64.o Suggested-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-6-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Remove 'interrupt' macroDominik Brodowski1-10/+6
It is now trivial to call interrupt_entry() and then the actual worker. Therefore, remove the interrupt macro and open code it all. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-5-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()Dominik Brodowski1-29/+37
We can also move the CLD, SWAPGS, and the switch_to_thread_stack() call to the interrupt_entry() helper function. As we do not want call depths of two, convert switch_to_thread_stack() to a macro. However, switch_to_thread_stack() has another user in entry_64_compat.S, which currently expects it to be a function. To keep the code changes in this patch minimal, create a wrapper function. The switch to a macro means that there is some binary code duplication if CONFIG_IA32_EMULATION=y is enabled. Therefore, the size reduction differs whether CONFIG_IA32_EMULATION is enabled or not: CONFIG_IA32_EMULATION=y (-0.13k): text data bss dec hex filename 17158 0 0 17158 4306 entry_64.o-orig 17028 0 0 17028 4284 entry_64.o CONFIG_IA32_EMULATION=n (-0.27k): text data bss dec hex filename 17158 0 0 17158 4306 entry_64.o-orig 16882 0 0 16882 41f2 entry_64.o Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-4-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entryDominik Brodowski1-18/+38
Moving the switch to IRQ stack from the interrupt macro to the helper function requires some trickery: All ENTER_IRQ_STACK really cares about is where the "original" stack -- meaning the GP registers etc. -- is stored. Therefore, we need to offset the stored RSP value by 8 whenever ENTER_IRQ_STACK is called from within a function. In such cases, and after switching to the IRQ stack, we need to push the "original" return address (i.e. the return address from the call to the interrupt entry function) to the IRQ stack. This trickery allows us to carve another .85k from the text size (it would be more except for the additional unwind hints): text data bss dec hex filename 18006 0 0 18006 4656 entry_64.o-orig 17158 0 0 17158 4306 entry_64.o Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-3-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper functionDominik Brodowski1-2/+9
The PUSH_AND_CLEAR_REGS macro is able to insert the GP registers "above" the original return address. This allows us to move a sizeable part of the interrupt entry macro to an interrupt entry helper function: text data bss dec hex filename 21088 0 0 21088 5260 entry_64.o-orig 18006 0 0 18006 4656 entry_64.o Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-2-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPPIngo Molnar1-12/+14
firmware_restrict_branch_speculation_*() recently started using preempt_enable()/disable(), but those are relatively high level primitives and cause build failures on some 32-bit builds. Since we want to keep <asm/nospec-branch.h> low level, convert them to macros to avoid header hell... Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()Arnd Bergmann1-1/+1
GCC-8 shows a warning for the x86 oprofile code that copies per-CPU data from CPU 0 to all other CPUs, which when building a non-SMP kernel turns into a memcpy() with identical source and destination pointers: arch/x86/oprofile/nmi_int.c: In function 'mux_clone': arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict] memcpy(per_cpu(cpu_msrs, cpu).multiplex, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ per_cpu(cpu_msrs, 0).multiplex, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(struct op_msr) * model->num_virt_counters); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/oprofile/nmi_int.c: In function 'nmi_setup': arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] I have analyzed a number of such warnings now: some are valid and the GCC warning is welcome. Others turned out to be false-positives, and GCC was changed to not warn about those any more. This is a corner case that is a false-positive but the GCC developers feel it's better to keep warning about it. In this case, it seems best to work around it by telling GCC a little more clearly that this code path is never hit with an IS_ENABLED() configuration check. Cc:stable as we also want old kernels to build cleanly with GCC-8. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Sebor <msebor@gcc.gnu.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()Peter Zijlstra1-0/+2
This is boot code and thus Spectre-safe: we run this _way_ before userspace comes along to have a chance to poison our branch predictor. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/boot, objtool: Annotate indirect jump in secondary_startup_64()Peter Zijlstra1-0/+2
The objtool retpoline validation found this indirect jump. Seeing how it's on CPU bringup before we run userspace it should be safe, annotate it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/paravirt, objtool: Annotate indirect callsPeter Zijlstra2-5/+17
Paravirt emits indirect calls which get flagged by objtool retpoline checks, annotate it away because all these indirect calls will be patched out before we start userspace. This patching happens through alternative_instructions() -> apply_paravirt() -> pv_init_ops.patch() which will eventually end up in paravirt_patch_default(). This function _will_ write direct alternatives. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/speculation, objtool: Annotate indirect calls/jumps for objtoolPeter Zijlstra1-4/+23
Annotate the indirect calls/jumps in the CALL_NOSPEC/JUMP_NOSPEC alternatives. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20x86/retpoline: Support retpoline builds with ClangDavid Woodhouse1-1/+4
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Link: http://lkml.kernel.org/r/1519037457-7643-5-git-send-email-dwmw@amazon.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20x86/speculation: Use IBRS if available before calling into firmwareDavid Woodhouse5-12/+63
Retpoline means the kernel is safe because it has no indirect branches. But firmware isn't, so use IBRS for firmware calls if it's available. Block preemption while IBRS is set, although in practice the call sites already had to be doing that. Ignore hpwdt.c for now. It's taking spinlocks and calling into firmware code, from an NMI handler. I don't want to touch that with a bargepole. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Link: http://lkml.kernel.org/r/1519037457-7643-2-git-send-email-dwmw@amazon.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20Revert "x86/retpoline: Simplify vmexit_fill_RSB()"David Woodhouse6-71/+65
This reverts commit 1dde7415e99933bb7293d6b2843752cbdb43ec11. By putting the RSB filling out of line and calling it, we waste one RSB slot for returning from the function itself, which means one fewer actual function call we can make if we're doing the Skylake abomination of call-depth counting. It also changed the number of RSB stuffings we do on vmexit from 32, which was correct, to 16. Let's just stop with the bikeshedding; it didn't actually *fix* anything anyway. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Link: http://lkml.kernel.org/r/1519037457-7643-4-git-send-email-dwmw@amazon.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20x86-64/realmode: Add instruction suffixJan Beulich1-1/+1
Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream GAS in the future (mine does already). Add the single missing suffix here. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5A8AF5F602000078001A9230@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20x86/LDT: Avoid warning in 32-bit builds with older gccJan Beulich1-0/+1
BUG() doesn't always imply "no return", and hence should be followed by a return statement even if that's obviously (to a human) unreachable. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5A8AF2AA02000078001A91E9@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20x86/IO-APIC: Avoid warning in 32-bit buildsJan Beulich1-1/+1
Constants wider than 32 bits should be tagged with ULL. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5A8AF23F02000078001A91E5@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 20:58:46 +0000