summaryrefslogtreecommitdiffstats
path: root/arch/x86/pci/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-11-21x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-yKrzysztof Wilczynski1-3/+1
Update arch/x86/pci/Makefile replacing the deprecated EXTRA_CFLAGS with the ccflags-y matching recommendation per section 3.7 of Documentation/kbuild/makefiles.txt. Link: https://lore.kernel.org/r/20190819060532.17093-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-04x86/PCI: VMD: Move VMD driver to drivers/pci/hostKeith Busch1-2/+0
Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jon Derrick <jonathan.derrick@intel.com>
2016-01-15x86/PCI: Add driver for Intel Volume Management Device (VMD)Keith Busch1-0/+2
The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2014-02-27x86, platforms: Remove NUMAQH. Peter Anvin1-1/+0
The NUMAQ support seems to be unmaintained, remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
2014-02-27x86, platforms: Remove SGI Visual WorkstationH. Peter Anvin1-2/+0
The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin <pazke@donpac.ru> Cc: Michael Reed <mdr@sgi.com> Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-17intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan1-1/+1
Following files contains code that is common to all intel mid soc's. So renamed them as below. mrst/mrst.c -> intel-mid/intel-mid.c mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c pci/mrst.c -> pci/intel_mid_pci.c Also, renamed the corresponding header files and made changes to the driver files that included these header files. To ensure that there are no functional changes, I have compared the objdump of renamed files before and after rename and found that the only difference is file name change. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-07x86/PCI: Add NumaChip remote PCI supportDaniel J Blueman1-0/+1
Add NumaChip-specific PCI access mechanism via MMCONFIG cycles, but preventing access to AMD Northbridges which shouldn't respond. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-12x86, platform: Initial support for sta2x11 I/O hubAlessandro Rubini1-0/+2
The "ConneXt" sta2x11 I/O Hub is a bridge from PCIe to AMBA, and is used as main chipset in some Atom boards. The set of peripherals it exports live in an AMBA bus internal to the chip, so a custom remapping of addresses is needed. This is implemented by fixup calls for the PCI deivices, based on CONFIG_X86_DEV_DMA_OPS and CONFIG_X86_DMA_REMAP . Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Link: http://lkml.kernel.org/r/ddca670ca8180e52d49b3fe642742ddd23ab2cb2.1333560789.git.rubini@gnudd.com Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-01-12x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=yBjorn Helgaas1-1/+2
We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-18x86/intel config: Revamp configuration to allow for Moorestown and MedfieldAlan Cox1-1/+1
This sets all up the other bits that need to be INTEL_MID specific rather than Moorestown specific. Signed-off-by: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/20111217174318.7207.91543.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-12ce4100: Add PCI register emulation for CE4100Dirk Brandewie1-0/+1
This patch provides access methods for PCI registers that mis-behave on the CE4100. Each register can be assigned a private init, read and write routine. The exception to this is the bridge device. The bridge device is the only device on bus zero (0) that requires any fixup so it is a special case. [ tglx: minor coding style cleanups, __init annotation and simplification of ce4100_conf_read/write ] Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> LKML-Reference: <40b6751381c2275dc359db5a17989cce22ad8db7.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-18xen/x86/PCI: Add support for the Xen PCI subsystemAlex Nixon1-0/+1
The frontend stub lives in arch/x86/pci/xen.c, alongside other sub-arch PCI init code (e.g. olpc.c). It provides a mechanism for Xen PCI frontend to setup/destroy legacy interrupts, MSI/MSI-X, and PCI configuration operations. [ Impact: add core of Xen PCI support ] [ v2: Removed the IOMMU code and only focusing on PCI.] [ v3: removed usage of pci_scan_all_fns as that does not exist] [ v4: introduced pci_xen value to fix compile warnings] [ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs] [ v7: added Acked-by] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Qing He <qing.he@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org
2010-05-21PCI: read memory ranges out of Broadcom CNB20LE host bridgeIra W. Snyder1-0/+2
Read the memory ranges behind the Broadcom CNB20LE host bridge out of the hardware. This allows PCI hotplugging to work, since we know which memory range to allocate PCI BAR's from. The x86 PCI code automatically prefers the ACPI _CRS information when it is available. In that case, this information is not used. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-07Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-02-25x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=nYinghai Lu1-1/+3
If we don't have any Moorestown CPU support compiled in, we don't need the Moorestown PCI support either. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B858E89.7040807@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-23x86/PCI: Moorestown PCI supportJesse Barnes1-1/+1
The Moorestown platform only has a few devices that actually support PCI config cycles. The rest of the devices use an in-RAM MCFG space for the purposes of device enumeration and initialization. There are a few uglies in the fake support, like BAR sizes that aren't a power of two, sizing detection, and writes to the real devices, but other than that it's pretty straightforward. Another way to think of this is not really as PCI at all, but just a table in RAM describing which devices are present, their capabilities and their offsets in MMIO space. This could have been done with a special new firmware table on this platform, but given that we do have some real PCI devices too, simply describing things in an MCFG type space was pretty simple. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10x86/pci: Enable pci root res read out for 32bit tooYinghai Lu1-2/+1
Should be good for 32bit too. -v3: cast res->start -v4: according to Linus, to use %pR instead of cast Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-9-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-28x86/PCI: remove IOH range fetchingJeff Garrett1-1/+1
Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/pci: seperate x86_pci_rootbus_res_quirks from amd_bus.cYinghai Lu1-1/+1
Those functions are used by intel_bus.c so seperate them to another file. and make amd_bus a bit smaller. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04x86/PCI: use -DDEBUG when CONFIG_PCI_DEBUG setBjorn Helgaas1-0/+4
We use dev_dbg() in arch/x86/pci, but there's no easy way to turn it on. Add -DDEBUG when CONFIG_PCI_DEBUG=y, just like we do in drivers/pci. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04x86/PCI: read root resources from IOH on IntelYinghai Lu1-0/+1
For intel systems with multi IOH, we should read peer root resources directly from PCI config space, and don't trust _CRS. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-11x86/pci: renamed: numa.c -> numaq_32.cRobert Richter1-1/+1
Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86/pci: Removing pci-y in MakefileRobert Richter1-6/+6
Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, remove leftover filesIngo Molnar1-2/+0
remove leftover arch/x86/mach-visws/* files. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, add early init quirksIngo Molnar1-1/+1
add early init quirks for VisWS. This gradually turns the VISWS subarch into a generic PC architecture. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, make VisWS boot on a regular PCIngo Molnar1-1/+1
first step: make the VISWS subarch boot on a regular PC. We take various shortcuts for that. We copy the generic arch setup file over into the VISWS setup file. This is the only step that is not expected to boot on a real VISWS. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: removing subsys_initcall ordering dependenciesRobert Richter1-4/+0
So far subsys_initcalls has been executed in this order depending on the object order in the Makefile: arch/x86/pci/visws.c:subsys_initcall(pcibios_init); arch/x86/pci/numa.c:subsys_initcall(pci_numa_init); arch/x86/pci/acpi.c:subsys_initcall(pci_acpi_init); arch/x86/pci/legacy.c:subsys_initcall(pci_legacy_init); arch/x86/pci/irq.c:subsys_initcall(pcibios_irq_init); arch/x86/pci/common.c:subsys_initcall(pcibios_init); This patch removes the ordering dependency. There is now only one subsys_initcall function that contains subsystem initialization code with a defined order. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: coalescing 32 and 64 bitRobert Richter1-20/+1
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: merge: moving mp_bus_to_node.c to amd_bus.cRobert Richter1-1/+0
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: creating pci-y for 64 bitRobert Richter1-4/+4
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: changing 64bit orderingRobert Richter1-6/+5
This should be safe since mmconfig*.o and init.o do not contain *initcalls with the same level as in other files. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: decoupling options for mp_bus_to_node.oRobert Richter1-3/+1
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: whitespace changes onlyRobert Richter1-7/+7
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: removing include dir flagRobert Richter1-3/+0
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: Removing Makefile_*Robert Richter1-2/+46
No functional nor ordering changes here. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11x86_64: move pciThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11i386: move pciThomas Gleixner1-0/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>