summaryrefslogtreecommitdiffstats
path: root/arch/x86/oprofile/op_model_p4.c
AgeCommit message (Collapse)AuthorFilesLines
2014-08-28percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_tChristoph Lameter1-1/+1
__get_cpu_var can paper over differences in the definitions of cpumask_var_t and either use the address of the cpumask variable directly or perform a fetch of the address of the struct cpumask allocated elsewhere. This is important particularly when using per cpu cpumask_var_t declarations because in one case we have an offset into a per cpu area to handle and in the other case we need to fetch a pointer from the offset. This patch introduces a new macro this_cpu_cpumask_var_ptr() that is defined where cpumask_var_t is defined and performs the proper actions. All use cases where __get_cpu_var is used with cpumask_var_t are converted to the use of this_cpu_cpumask_var_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-19Kill off warning: ‘inline’ is not at beginning of declarationJesper Juhl1-1/+1
Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on ↵Don Zickus1-1/+1
CONFIG_HARDLOCKUP_DETECTOR The x86 arch has shifted its use of the nmi_watchdog from a local implementation to the global one provide by kernel/watchdog.c. This shift has caused a whole bunch of compile problems under different config options. I attempt to simplify things with the patch below. In order to simplify things, I had to come to terms with the meaning of two terms ARCH_HAS_NMI_WATCHDOG and CONFIG_HARDLOCKUP_DETECTOR. Basically they mean the same thing, the former on a local level and the latter on a global level. With the old x86 nmi watchdog gone, there is no need to rely on defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't make sense any more. x86 will now use the global implementation. The changes below do a few things. First it changes the few places that relied on ARCH_HAS_NMI_WATCHDOG to use CONFIG_X86_LOCAL_APIC (the former was an alias for the latter anyway, so nothing unusual here). Those pieces of code were relying more on local apic functionality the nmi watchdog functionality, so the change should make sense. Second, I removed the x86 implementation of touch_nmi_watchdog(). It isn't need now, instead x86 will rely on kernel/watchdog.c's implementation. Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from x86. And tweaked the include/linux/nmi.h file to tell users to look for an externally defined touch_nmi_watchdog in the case of ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This changes removes some of the ugliness in that file. Finally, I added a Kconfig dependency for CONFIG_HARDLOCKUP_DETECTOR that said you can't have ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR. You can only have one nmi_watchdog. Tested with ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig, (various broken configs) Hopefully, after this patch I won't get any more compile broken emails. :-) v3: changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-04oprofile/x86: return -EBUSY if counters are already reservedRobert Richter1-1/+13
In case a counter is already reserved by the watchdog or perf_event subsystem, oprofile ignored this counters silently. This case is handled now and oprofile_setup() now reports an error. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: moving shutdown functionsRobert Richter1-20/+18
Moving some code in preparation of the next patch. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26oprofile/x86: use kzalloc() instead of kmalloc()Robert Richter1-6/+0
Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20x86/oprofile: Modify initialization of num_virt_countersRobert Richter1-2/+0
Models that do not yet support counter multiplexing have to setup num_virt_counters. This patch implements the setup from num_counters if num_virt_counters is not set. Thus, num_virt_counters must be setup only for multiplexing support. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_specRobert Richter1-2/+0
The member num_virt_controls of struct op_x86_model_spec is not used. This patch removes it. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20x86/oprofile: Remove const qualifier from struct op_x86_model_specRobert Richter1-2/+2
This patch removes the const qualifier from struct op_x86_model_spec to make model parameters changable. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-20oprofile: Implement performance counter multiplexingJason Yeh1-0/+4
The number of hardware counters is limited. The multiplexing feature enables OProfile to gather more events than counters are provided by the hardware. This is realized by switching between events at an user specified time interval. A new file (/dev/oprofile/time_slice) is added for the user to specify the timer interval in ms. If the number of events to profile is higher than the number of hardware counters available, the patch will schedule a work queue that switches the event counter and re-writes the different sets of values into it. The switching mechanism needs to be implemented for each architecture to support multiplexing. This patch only implements AMD CPU support, but multiplexing can be easily extended for other models and architectures. There are follow-on patches that rework parts of this patch. Signed-off-by: Jason Yeh <jason.yeh@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-14x86/oprofile: Whitespaces changes onlyRobert Richter1-4/+4
This patch fixes whitespace changes of code that will be touched in follow-on patches. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-07-14x86/oprofile: Fix cast of counter valueRobert Richter1-3/+3
When casting the counter value to a 64 bit value in 32 bit mode, sign extension may lead to broken counter values. This patch fixes this by casting to (u64) instead of (s64). Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11x86/oprofile: use 64 bit wrmsr functionsRobert Richter1-6/+6
This patch replaces some wrmsr() functions with wrmsrl(). Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11x86/oprofile: replace CTR*_IS_RESERVED macrosRobert Richter1-5/+5
The patch replaces all CTR*_IS_RESERVED macros. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11x86/oprofile: replace CTR_OVERFLOWED macrosRobert Richter1-3/+3
The patch replaces all CTR_OVERFLOWED macros. 64 bit MSR functions and 64 bit counter values are used now. Thus, it will be easier to later extend the models to use more than 32 bit width counters. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11x86/oprofile: pass the model to setup_ctrs() functionsRobert Richter1-1/+2
In follow-on patches the setup_ctrs() functions will need data that describes the model. This patch extends the function argument list to pass a pointer of the model to these function. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11x86/oprofile: remove MSR macros for p4 cpusRobert Richter1-20/+19
The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and maintain. This patch replaces them by rdmsr()/wrmsr() functions and simplifies the code. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11x86/oprofile: move common macros to op_x86_model.hRobert Richter1-2/+0
There are duplicate macro implementations in model specific code. This patch moves all common macros to op_x86_model.h. Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-03-13cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_tRusty Russell1-1/+1
Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y In most places it's cleaner to use the accessors cpu_sibling_mask() and cpu_core_mask() wrappers which already exist. I couldn't avoid cleaning up the access in oprofile, either. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-15oprofile: whitespace fixesRobert Richter1-16/+16
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-09-24Revert "Oprofile Multiplexing Patch"Robert Richter1-4/+0
Reverting commit 1a960b402a51d80abf54e3f8e4972374ffe5f22d for the main branch. Multiplexing will be tracked on a separate feature branch. Conflicts: arch/x86/oprofile/nmi_int.c
2008-08-19Merge branch 'x86/oprofile' into oprofileIngo Molnar1-88/+87
2008-08-19x86: Coding style fixes to arch/x86/oprofile/op_model_p4.cPaolo Ciarrocchi1-88/+87
A coding style patch to arch/x86/oprofile/op_model_p4.c that removes 87 errors and 4 warnings. Before: total: 89 errors, 13 warnings, 722 lines checked After: total: 2 errors, 9 warnings, 721 lines checked Compile tested, binary verified as follow: paolo@paolo-desktop:~/linux.trees.git$ size /tmp/op_model_p4.o.* text data bss dec hex filename 2691 968 32 3691 e6b /tmp/op_model_p4.o.after 2691 968 32 3691 e6b /tmp/op_model_p4.o.before paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/op_model_p4.o.* 8c1c9823bab33333e1f7f76574e62561 /tmp/op_model_p4.o.after 8c1c9823bab33333e1f7f76574e62561 /tmp/op_model_p4.o.before Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Cc: robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26Oprofile Multiplexing PatchJason Yeh1-0/+4
This patch introduces multiplexing support for the Oprofile kernel module. It basically adds a new function pointer in oprofile_operator allowing each architecture to supply its callback to switch between different sets of event when the timer expires. Userspace tools can modify the time slice through /dev/oprofile/time_slice. It also modifies the number of counters exposed to the userspace through /dev/oprofile. For example, the number of counters for AMD CPUs are changed to 32 and multiplexed in the sets of 4. Signed-off-by: Jason Yeh <jason.yeh@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-16Convert cpu_sibling_map to be a per cpu variableMike Travis1-1/+1
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11i386: move oprofileThomas Gleixner1-0/+722
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 16:24:49 +0000