summaryrefslogtreecommitdiffstats
path: root/arch/x86/lguest
AgeCommit message (Collapse)AuthorFilesLines
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-1/+1
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-11-01x86/fpu: Remove clts()Andy Lutomirski1-12/+0
The kernel doesn't use clts() any more. Remove it and all of its paravirt infrastructure. A careful reader may notice that xen_clts() appears to have been buggy -- it didn't update xen_cr0_value. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm list <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/3d3c8ca62f17579b9849a013d71e59a4d5d1b079.1477951965.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-01x86/fpu, lguest: Remove CR0.TS supportAndy Lutomirski1-10/+7
Now that Linux never sets CR0.TS, lguest doesn't need to support it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm list <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/8a7bf2c11231c082258fd67705d0f275639b8475.1477951965.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-10lguest: Read offset of device_cap laterPaul Bolle1-9/+3
Read the offset of the capability with type VIRTIO_PCI_CAP_DEVICE_CFG only when we're sure we're going to need it. Which is when all checks have passed and we know we have a virtio console with an emerg_wr field. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: lguest@lists.ozlabs.org Link: http://lkml.kernel.org/r/1457006501-5377-3-git-send-email-pebolle@tiscali.nl Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-10lguest: Read length of device_cap laterPaul Bolle1-4/+3
Read the length of the capability with type VIRTIO_PCI_CAP_DEVICE_CFG only when we're sure we're going to need it. Which is just before the check whether the virtio console actually has an emerg_wr field. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: lguest@lists.ozlabs.org Link: http://lkml.kernel.org/r/1457006501-5377-2-git-send-email-pebolle@tiscali.nl Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-22x86/paravirt: Remove paravirt_enabled()Luis R. Rodriguez1-2/+0
Now that all previous paravirt_enabled() uses were replaced with proper x86 semantics by the previous patches we can remove the unused paravirt_enabled() mechanism. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-15-git-send-email-mcgrof@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-22x86/rtc: Replace paravirt rtc check with platform legacy quirkLuis R. Rodriguez1-1/+0
We have 4 types of x86 platforms that disable RTC: * Intel MID * Lguest - uses paravirt * Xen dom-U - uses paravirt * x86 on legacy systems annotated with an ACPI legacy flag We can consolidate all of these into a platform specific legacy quirk set early in boot through i386_start_kernel() and through x86_64_start_reservations(). This deals with the RTC quirks which we can rely on through the hardware subarch, the ACPI check can be dealt with separately. For Xen things are bit more complex given that the @X86_SUBARCH_XEN x86_hardware_subarch is shared on for Xen which uses the PV path for both domU and dom0. Since the semantics for differentiating between the two are Xen specific we provide a platform helper to help override default legacy features -- x86_platform.set_legacy_features(). Use of this helper is highly discouraged, its only purpose should be to account for the lack of semantics available within your given x86_hardware_subarch. As per 0-day, this bumps the vmlinux size using i386-tinyconfig as follows: TOTAL TEXT init.text x86_early_init_platform_quirks() +70 +62 +62 +43 Only 8 bytes overhead total, as the main increase in size is all removed via __init. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-5-git-send-email-mcgrof@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-14Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Main kernel side changes: - Big reorganization of the x86 perf support code. The old code grew organically deep inside arch/x86/kernel/cpu/perf* and its naming became somewhat messy. The new location is under arch/x86/events/, using the following cleaner hierarchy of source code files: perf/x86: Move perf_event.c .................. => x86/events/core.c perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch] perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch] perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch] perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c perf/x86: Move perf_event_intel_uncore_snb.c => x86/events/intel/uncore_snb.c perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c (Borislav Petkov) - Update various x86 PMU constraint and hw support details (Stephane Eranian) - Optimize kprobes for BPF execution (Martin KaFai Lau) - Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas Gleixner) - Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner) - Various fixes and smaller cleanups. There are lots of perf tooling updates as well. A few highlights: perf report/top: - Hierarchy histogram mode for 'perf top' and 'perf report', showing multiple levels, one per --sort entry: (Namhyung Kim) On a mostly idle system: # perf top --hierarchy -s comm,dso Then expand some levels and use 'P' to take a snapshot: # cat perf.hist.0 - 92.32% perf 58.20% perf 22.29% libc-2.22.so 5.97% [kernel] 4.18% libelf-0.165.so 1.69% [unknown] - 4.71% qemu-system-x86 3.10% [kernel] 1.60% qemu-system-x86_64 (deleted) + 2.97% swapper # - Add 'L' hotkey to dynamicly set the percent threshold for histogram entries and callchains, i.e. dynamicly do what the --percent-limit command line option to 'top' and 'report' does. (Namhyung Kim) perf mem: - Allow specifying events via -e in 'perf mem record', also listing what events can be specified via 'perf mem record -e list' (Jiri Olsa) perf record: - Add 'perf record' --all-user/--all-kernel options, so that one can tell that all the events in the command line should be restricted to the user or kernel levels (Jiri Olsa), i.e.: perf record -e cycles:u,instructions:u is equivalent to: perf record --all-user -e cycles,instructions - Make 'perf record' collect CPU cache info in the perf.data file header: $ perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] $ perf report --header-only -I | tail -10 | head -8 # CPU cache info: # L1 Data 32K [0-1] # L1 Instruction 32K [0-1] # L1 Data 32K [2-3] # L1 Instruction 32K [2-3] # L2 Unified 256K [0-1] # L2 Unified 256K [2-3] # L3 Unified 4096K [0-3] Will be used in 'perf c2c' and eventually in 'perf diff' to allow, for instance running the same workload in multiple machines and then when using 'diff' show the hardware difference. (Jiri Olsa) - Improved support for Java, using the JVMTI agent library to do jitdumps that then will be inserted in synthesized PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized ELF files stored in ~/.debug and keyed with build-ids, to allow symbol resolution and even annotation with source line info, see the changeset comments to see how to use it (Stephane Eranian) perf script/trace: - Decode data_src values (e.g. perf.data files generated by 'perf mem record') in 'perf script': (Jiri Olsa) # perf script perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - Improve support to 'data_src', 'weight' and 'addr' fields in 'perf script' (Jiri Olsa) - Handle empty print fmts in 'perf script -s' i.e. when running python or perl scripts (Taeung Song) perf stat: - 'perf stat' now shows shadow metrics (insn per cycle, etc) in interval mode too. E.g: # perf stat -I 1000 -e instructions,cycles sleep 1 # time counts unit events 1.000215928 519,620 instructions # 0.69 insn per cycle 1.000215928 752,003 cycles <SNIP> - Port 'perf kvm stat' to PowerPC (Hemant Kumar) - Implement CSV metrics output in 'perf stat' (Andi Kleen) perf BPF support: - Support converting data from bpf events in 'perf data' (Wang Nan) - Print bpf-output events in 'perf script': (Wang Nan). # perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000 # perf script usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms]) BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a 0008: 42 50 46 20 65 76 65 6e BPF even 0010: 74 21 00 00 t!.. BPF string: "Raise a BPF event!" # - Add API to set values of map entries in a BPF object, be it individual map slots or ranges (Wang Nan) - Introduce support for the 'bpf-output' event (Wang Nan) - Add glue to read perf events in a BPF program (Wang Nan) - Improve support for bpf-output events in 'perf trace' (Wang Nan) ... and tons of other changes as well - see the shortlog and git log for details!" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits) perf stat: Add --metric-only support for -A perf stat: Implement --metric-only mode perf stat: Document CSV format in manpage perf hists browser: Check sort keys before hot key actions perf hists browser: Allow thread filtering for comm sort key perf tools: Add sort__has_comm variable perf tools: Recalc total periods using top-level entries in hierarchy perf tools: Remove nr_sort_keys field perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry() perf tools: Remove hist_entry->fmt field perf tools: Fix command line filters in hierarchy mode perf tools: Add more sort entry check functions perf tools: Fix hist_entry__filter() for hierarchy perf jitdump: Build only on supported archs tools lib traceevent: Add '~' operation within arg_num_eval() perf tools: Omit unnecessary cast in perf_pmu__parse_scale perf tools: Pass perf_hpp_list all the way through setup_sort_list perf tools: Fix perf script python database export crash perf jitdump: DWARF is also needed perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes ...
2016-02-09locking/lockdep: Eliminate lockdep_init()Andrey Ryabinin1-6/+0
Lockdep is initialized at compile time now. Get rid of lockdep_init(). Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: mm-commits@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-01x86/cpufeature: Use enum cpuid_leafs instead of magic numbersHuaitong Han1-1/+1
Most of the magic numbers in x86_capability[] have been converted to 'enum cpuid_leafs', and this patch updates the remaining part. Signed-off-by: Huaitong Han <huaitong.han@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: lguest@lists.ozlabs.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1453750913-4781-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-11Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "The main changes in this cycle were: - code patching and cpu_has cleanups (Borislav Petkov) - paravirt cleanups (Juergen Gross) - TSC cleanup (Thomas Gleixner) - ptrace cleanup (Chen Gang)" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arch/x86/kernel/ptrace.c: Remove unused arg_offs_table x86/mm: Align macro defines x86/cpu: Provide a config option to disable static_cpu_has x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros x86/cpufeature: Cleanup get_cpu_cap() x86/cpufeature: Move some of the scattered feature bits to x86_capability x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_defer x86/paravirt: Remove unused pv_apic_ops structure x86/tsc: Remove unused tsc_pre_init() hook x86: Remove unused function cpu_has_ht_siblings() x86/paravirt: Kill some unused patching functions
2015-12-19x86/paravirt: Prevent rtc_cmos platform device init on PV guestsDavid Vrabel1-0/+1
Adding the rtc platform device in non-privileged Xen PV guests causes an IRQ conflict because these guests do not have legacy PIC and may allocate irqs in the legacy range. In a single VCPU Xen PV guest we should have: /proc/interrupts: CPU0 0: 4934 xen-percpu-virq timer0 1: 0 xen-percpu-ipi spinlock0 2: 0 xen-percpu-ipi resched0 3: 0 xen-percpu-ipi callfunc0 4: 0 xen-percpu-virq debug0 5: 0 xen-percpu-ipi callfuncsingle0 6: 0 xen-percpu-ipi irqwork0 7: 321 xen-dyn-event xenbus 8: 90 xen-dyn-event hvc_console ... But hvc_console cannot get its interrupt because it is already in use by rtc0 and the console does not work. genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0) We can avoid this problem by realizing that unprivileged PV guests (both Xen and lguests) are not supposed to have rtc_cmos device and so adding it is not necessary. Privileged guests (i.e. Xen's dom0) do use it but they should not have irq conflicts since they allocate irqs above legacy range (above gsi_top, in fact). Instead of explicitly testing whether the guest is privileged we can extend pv_info structure to include information about guest's RTC support. Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: vkuznets@redhat.com Cc: xen-devel@lists.xenproject.org Cc: konrad.wilk@oracle.com Cc: stable@vger.kernel.org # 4.2+ Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-25x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_deferJuergen Gross1-1/+0
pte_update_defer can be removed as it is always set to the same function as pte_update. So any usage of pte_update_defer() can be replaced by pte_update(). pmd_update and pmd_update_defer are always set to paravirt_nop, so they can just be nuked. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: jeremy@goop.org Cc: chrisw@sous-sol.org Cc: akataria@vmware.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xen.org Cc: konrad.wilk@oracle.com Cc: david.vrabel@citrix.com Cc: boris.ostrovsky@oracle.com Link: http://lkml.kernel.org/r/1447771879-1806-1-git-send-email-jgross@suse.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-01Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds1-30/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "This udpate contains: - rework the irq vector array to store a pointer to the irq descriptor instead of the irq number to avoid a lookup of the irq descriptor in the irq entry path - lguest interrupt handling cleanups - conversion of the local apic timer to the new clockevent callbacks - preparatory changes for the irq argument removal of interrupt flow handlers" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Do not dereference irq descriptor before checking it tools/lguest: Clean up include dir tools/lguest: Fix redefinition of struct virtio_pci_cfg_cap x86/irq: Store irq descriptor in vector array genirq: Provide irq_desc_has_action x86/irq: Get rid of an indentation level x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED x86/irq: Replace numeric constant x86/irq: Protect smp_cleanup_move x86/lguest: Do not setup unused irq vectors x86/lguest: Clean up lguest_setup_irq x86/apic: Drop local_irq_save/restore in timer callbacks x86/apic: Migrate apic timer to new set_state interface x86/irq: Use access helper irq_data_get_affinity_mask() x86/irq: Use accessor irq_data_get_irq_handler_data() x86/irq: Use accessor irq_data_get_node()
2015-08-06x86/irq: Store irq descriptor in vector arrayThomas Gleixner1-1/+3
We can spare the irq_desc lookup in the interrupt entry code if we store the descriptor pointer in the vector array instead the interrupt number. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/20150802203609.717724106@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06x86/lguest: Do not setup unused irq vectorsThomas Gleixner1-9/+13
No point in assigning the interrupt vectors if there is no interrupt chip installed. Move it to lguest_setup_irq() and call it from lguest_enable_irq. [ rusty: Typo fix and error handling ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/1438662776-4823-2-git-send-email-rusty@rustcorp.com.au Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06x86/lguest: Clean up lguest_setup_irqRusty Russell1-21/+22
We make it static and hoist it higher in the file for the next patch. We also give a nice panic if it fails during boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/1438662776-4823-1-git-send-email-rusty@rustcorp.com.au Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30x86/lguest/timer: Migrate to new set-state interfaceViresh Kumar1-18/+6
Migrate lguest driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything while switching modes other than in shutdown mode and so those are not implemented. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-and-tested-by: Rusty Russell <rusty@rustcorp.com.au> Cc: linaro-kernel@lists.linaro.org Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: lguest@lists.ozlabs.org (open list:LGUEST) Link: http://lkml.kernel.org/r/b96f1c308f4523255c5394a4e6e13f2b67685402.1437042675.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-22Merge branch 'x86-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Ingo Molnar: "There were so many changes in the x86/asm, x86/apic and x86/mm topics in this cycle that the topical separation of -tip broke down somewhat - so the result is a more traditional architecture pull request, collected into the 'x86/core' topic. The topics were still maintained separately as far as possible, so bisectability and conceptual separation should still be pretty good - but there were a handful of merge points to avoid excessive dependencies (and conflicts) that would have been poorly tested in the end. The next cycle will hopefully be much more quiet (or at least will have fewer dependencies). The main changes in this cycle were: * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas Gleixner) - This is the second and most intrusive part of changes to the x86 interrupt handling - full conversion to hierarchical interrupt domains: [IOAPIC domain] ----- | [MSI domain] --------[Remapping domain] ----- [ Vector domain ] | (optional) | [HPET MSI domain] ----- | | [DMAR domain] ----------------------------- | [Legacy domain] ----------------------------- This now reflects the actual hardware and allowed us to distangle the domain specific code from the underlying parent domain, which can be optional in the case of interrupt remapping. It's a clear separation of functionality and removes quite some duct tape constructs which plugged the remap code between ioapic/msi/hpet and the vector management. - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt injection into guests (Feng Wu) * x86/asm changes: - Tons of cleanups and small speedups, micro-optimizations. This is in preparation to move a good chunk of the low level entry code from assembly to C code (Denys Vlasenko, Andy Lutomirski, Brian Gerst) - Moved all system entry related code to a new home under arch/x86/entry/ (Ingo Molnar) - Removal of the fragile and ugly CFI dwarf debuginfo annotations. Conversion to C will reintroduce many of them - but meanwhile they are only getting in the way, and the upstream kernel does not rely on them (Ingo Molnar) - NOP handling refinements. (Borislav Petkov) * x86/mm changes: - Big PAT and MTRR rework: making the code more robust and preparing to phase out exposing direct MTRR interfaces to drivers - in favor of using PAT driven interfaces (Toshi Kani, Luis R Rodriguez, Borislav Petkov) - New ioremap_wt()/set_memory_wt() interfaces to support Write-Through cached memory mappings. This is especially important for good performance on NVDIMM hardware (Toshi Kani) * x86/ras changes: - Add support for deferred errors on AMD (Aravind Gopalakrishnan) This is an important RAS feature which adds hardware support for poisoned data. That means roughly that the hardware marks data which it has detected as corrupted but wasn't able to correct, as poisoned data and raises an APIC interrupt to signal that in the form of a deferred error. It is the OS's responsibility then to take proper recovery action and thus prolonge system lifetime as far as possible. - Add support for Intel "Local MCE"s: upcoming CPUs will support CPU-local MCE interrupts, as opposed to the traditional system- wide broadcasted MCE interrupts (Ashok Raj) - Misc cleanups (Borislav Petkov) * x86/platform changes: - Intel Atom SoC updates ... and lots of other cleanups, fixlets and other changes - see the shortlog and the Git log for details" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits) x86/hpet: Use proper hpet device number for MSI allocation x86/hpet: Check for irq==0 when allocating hpet MSI interrupts x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain iommu, x86: Properly handle posted interrupts for IOMMU hotplug iommu, x86: Provide irq_remapping_cap() interface iommu, x86: Setup Posted-Interrupts capability for Intel iommu iommu, x86: Add cap_pi_support() to detect VT-d PI capability iommu, x86: Avoid migrating VT-d posted interrupts iommu, x86: Save the mode (posted or remapped) of an IRTE iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip iommu: dmar: Provide helper to copy shared irte fields iommu: dmar: Extend struct irte for VT-d Posted-Interrupts iommu: Add new member capability to struct irq_remap_ops x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry() ...
2015-05-19x86/fpu: Rename i387.h to fpu/api.hIngo Molnar1-1/+1
We already have fpu/types.h, move i387.h to fpu/api.h. The file name has become a misnomer anyway: it offers generic FPU APIs, but is not limited to i387 functionality. Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-10x86/asm/entry: Remove SYSCALL_VECTORBrian Gerst1-2/+2
Use IA32_SYSCALL_VECTOR for both compat and native. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431185813-15413-4-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-22Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds2-21/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Some virtio internal cleanups, a new virtio device "virtio input", and a change to allow the legacy virtio balloon. Most excitingly, some lguest work! No seriously, I got some cleanup patches" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio: drop virtio_device_is_legacy_only virtio_pci: support non-legacy balloon devices virtio_mmio: support non-legacy balloon devices virtio_ccw: support non-legacy balloon devices virtio: balloon might not be a legacy device virtio_balloon: transitional interface virtio_ring: Update weak barriers to use dma_wmb/rmb virtio_pci_modern: switch to type-safe io accessors virtio_pci_modern: type-safe io accessors lguest: handle traps on the "interrupt suppressed" iret instruction. virtio: drop a useless config read virtio_config: reorder functions Add virtio-input driver. lguest: suppress interrupts for single insn, not range. lguest: simplify lguest_iret lguest: rename i386_head.S in the comments lguest: explicitly set miscdevice's private_data NULL lguest: fix pending interrupt test.
2015-04-08x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layoutDenys Vlasenko1-1/+2
Interrupt entry points are handled with the following code, each 32-byte code block contains seven entry points: ... [push][jump 22] // 4 bytes [push][jump 18] // 4 bytes [push][jump 14] // 4 bytes [push][jump 10] // 4 bytes [push][jump 6] // 4 bytes [push][jump 2] // 4 bytes [push][jump common_interrupt][padding] // 8 bytes [push][jump] [push][jump] [push][jump] [push][jump] [push][jump] [push][jump] [push][jump common_interrupt][padding] [padding_2] common_interrupt: And there is a table which holds pointers to every entry point, IOW: to every push. In cold cache, two jumps are still costlier than one, even though we get the benefit of them residing in the same cacheline. This change replaces short jumps with near ones to 'common_interrupt', and pads every push+jump pair to 8 bytes. This way, each interrupt takes only one jump. This change replaces ".p2align CONFIG_X86_L1_CACHE_SHIFT" before dispatch table with ".align 8" - we do not need anything stronger than that. The table of entry addresses (the interrupt[] array) is no longer necessary, the address of entries can be easily calculated as (irq_entries_start + i*8). text data bss dec hex filename 12546 0 0 12546 3102 entry_64.o.before 11626 0 0 11626 2d6a entry_64.o The size decrease is because 1656 bytes of .init.rodata are gone. That's initdata, though. The resident size does go up a bit. Run-tested (32 and 64 bits). Acked-and-Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428090553-7283-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24lguest: suppress interrupts for single insn, not range.Rusty Russell2-11/+7
The last patch reduced our interrupt-suppression region to one address, so simplify the code somewhat. Also, remove the obsolete undefined instruction ranges and the comment which refers to lguest_guest.S instead of head_32.S. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24lguest: simplify lguest_iretDenys Vlasenko1-10/+9
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: lguest@lists.ozlabs.org CC: x86@kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24lguest: rename i386_head.S in the commentsAlexander Kuleshov1-2/+2
i386_head.S renamed to the head_32.S, let's update it in the comments too. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-20lguest: fix pending interrupt test.Rusty Russell1-1/+1
Denys says: TEST with zero will always set ZF. Thus, "jnz send_interrupts" never jumps. We get interrupts regularly enough that this didn't cause immediate problems. Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-06x86/asm/entry: Add this_cpu_sp0() to read sp0 for the current cpuAndy Lutomirski1-0/+1
We currently store references to the top of the kernel stack in multiple places: kernel_stack (with an offset) and init_tss.x86_tss.sp0 (no offset). The latter is defined by hardware and is a clean canonical way to find the top of the stack. Add an accessor so we can start using it. This needs minor paravirt tweaks. On native, sp0 defines the top of the kernel stack and is therefore always correct. On Xen and lguest, the hypervisor tracks the top of the stack, but we want to start reading sp0 in the kernel. Fixing this is simple: just update our local copy of sp0 as well as the hypervisor's copy on task switches. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8d675581859712bee09a055ed8f785d80dac1eca.1425611534.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-19lguest: update help text.Rusty Russell1-1/+1
We now add about 10k, not 6k, when lguest support is compiled in. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-19lguest: now depends on PCIRusty Russell1-1/+1
Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13lguest: don't look in console features to find emerg_wr.Rusty Russell1-33/+24
The 1.0 spec clearly states that you must set the ACKNOWLEDGE and DRIVER status bits before accessing the feature bits. This is a problem for the early console code, which doesn't really want to acknowledge the device (the spec specifically excepts writing to the console's emerg_wr from the usual ordering constrains). Instead, we check that the *size* of the device configuration is sufficient to hold emerg_wr: at worst (if the device doesn't support the VIRTIO_CONSOLE_F_EMERG_WRITE feature), it will ignore the writes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: use the PCI console device's emerg_wr for early boot messages.Rusty Russell1-12/+134
This involves manually checking the console device (which is always in slot 1 of bus 0) and using the window in VIRTIO_PCI_CAP_PCI_CFG to program it (as we can't map the BAR yet). We could in fact do this much earlier, but we wait for the first write from the virtio_cons_early_init() facility. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Override pcibios_enable_irq/pcibios_disable_irq to our stupid PICRusty Russell1-0/+24
This lets us deliver interrupts for our emulated PCI devices using our dumb PIC, and not emulate an 8259 and PCI irq mapping tables or whatever. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: disable ACPI explicitly.Rusty Russell1-0/+4
Once we add PCI, it starts trying to manage our interrupts. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: don't disable iospace.Rusty Russell1-8/+0
This no longer speeds up boot (IDE got better, I guess), but it does stop us probing for a PCI bus. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-12-16x86: Avoid building unused IRQ entry stubsJan Beulich1-1/+1
When X86_LOCAL_APIC (i.e. unconditionally on x86-64), first_system_vector will never end up being higher than LOCAL_TIMER_VECTOR (0xef), and hence building stubs for vectors 0xef...0xff is pointlessly reducing code density. Deal with this at build time already. Taking into consideration that X86_64 implies X86_LOCAL_APIC, also simplify (and hence make easier to read and more consistent with the change done here) some #if-s in arch/x86/kernel/irqinit.c. While we could further improve the packing of the IRQ entry stubs (the four ones now left in the last set could be fit into the four padding bytes each of the final four sets have) this doesn't seem to provide any real benefit: Both irq_entries_start and common_interrupt getting cache line aligned, eliminating the 30th set would just produce 32 bytes of padding between the 29th and common_interrupt. [ tglx: Folded lguest fix from Dan Carpenter ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: lguest@lists.ozlabs.org Cc: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/54574D5F0200007800044389@mail.emea.novell.com Link: http://lkml.kernel.org/r/20141115185718.GB6530@mwanda Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-05asmlinkage, x86: Add explicit __visible to arch/x86/*Andi Kleen1-2/+2
As requested by Linus add explicit __visible to the asmlinkage users. This marks all functions visible to assembler. Tree sweep for arch/x86/* Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86, asmlinkage, lguest: Fix C functions used by inline assemblerAndi Kleen1-6/+6
- Make the C code used by the paravirt stubs visible - Since they have to be global now, give them a more unique name. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-3-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-09-06lguest: fix GPF in guest when using gdb.Rusty Russell1-0/+7
Since the Guest is in ring 1, it can't read the debug registers: doing so gives a number of nasty messages: (gdb) run Starting program: /bin/sleep [ 31.170230] general protection fault: 0000 [#1] SMP [ 31.170230] Modules linked in: [ 31.170230] CPU: 0 PID: 2678 Comm: sleep Not tainted 3.11.0+ #64 [ 31.170230] task: cc5c09b0 ti: cc79c000 task.ti: cc79c000 [ 31.170230] EIP: 0061:[<c01333d8>] EFLAGS: 00000097 CPU: 0 [ 31.170230] EIP is at native_get_debugreg+0x58/0x70 [ 31.170230] EAX: 00000006 EBX: cc79dfb4 ECX: b7fff918 EDX: 00000000 [ 31.170230] ESI: cc5c09b0 EDI: 00000000 EBP: cc79df84 ESP: cc79df84 [ 31.170230] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 31.170230] CR0: 00000008 CR2: 081ba69a CR3: 0e2f2000 CR4: 00000000 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-15lguest: Point to the right directory for the lguest launcherHolger Hans Peter Freyther1-2/+1
The code was moved in 07fe9977b6234ede1bd29e10e0323e478860c871 but the comment was not updated. The reference in drivers/vhost/vhost.c is left alone as it is historic. Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
2013-07-03Merge tags 'modules-next-for-linus' and 'virtio-next-for-linus' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull trivial module and virtio fixes from Rusty Russell. Apparently these were meant for 3.10, but came in after the release. * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modpost.c: Add .text.unlikely to TEXT_SECTIONS * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio: remove virtqueue_add_buf(). lguest: rename i386_head.S virtio_blk: Add missing 'static' qualifiers virtio: console: Add emergency writeonly register to config space virtio_pci: better macro exported in uapi
2013-06-06x86: Get rid of ->hard_math and all the FPU asm fuH. Peter Anvin1-1/+1
Reimplement FPU detection code in C and drop old, not-so-recommended detection method in asm. Move all the relevant stuff into i387.c where it conceptually belongs. Finally drop cpuinfo_x86.hard_math. [ hpa: huge thanks to Borislav for taking my original concept patch and productizing it ] [ Boris, note to self: do not use static_cpu_has before alternatives! ] Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1367244262-29511-2-git-send-email-bp@alien8.de Link: http://lkml.kernel.org/r/1365436666-9837-2-git-send-email-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-28x86: Increase precision of x86_platform.get/set_wallclock()David Vrabel1-2/+2
All the virtualized platforms (KVM, lguest and Xen) have persistent wallclocks that have more than one second of precision. read_persistent_wallclock() and update_persistent_wallclock() allow for nanosecond precision but their implementation on x86 with x86_platform.get/set_wallclock() only allows for one second precision. This means guests may see a wallclock time that is off by up to 1 second. Make set_wallclock() and get_wallclock() take a struct timespec parameter (which allows for nanosecond precision) so KVM and Xen guests may start with a more accurate wallclock time and a Xen dom0 can maintain a more accurate wallclock for guests. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-20lguest: rename i386_head.SDaniel Baluta2-1/+1
Since commit 9a163ed8e0 (i386: move kernel) kernel/i386_head.S was renamed to kernel/head_32.S. We do the same for lguest/i386_head.S. Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-30Merge branch 'x86-paravirt-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt update from Ingo Molnar: "Various paravirtualization related changes - the biggest one makes guest support optional via CONFIG_HYPERVISOR_GUEST" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, wakeup, sleep: Use pvops functions for changing GDT entries x86, xen, gdt: Remove the pvops variant of store_gdt. x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed. x86: Make Linux guest support optional x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu
2013-04-10x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metalBoris Ostrovsky1-0/+1
Invoking arch_flush_lazy_mmu_mode() results in calls to preempt_enable()/disable() which may have performance impact. Since lazy MMU is not used on bare metal we can patch away arch_flush_lazy_mmu_mode() so that it is never called in such environment. [ hpa: the previous patch "Fix vmalloc_fault oops during lazy MMU updates" may cause a minor performance regression on bare metal. This patch resolves that performance regression. It is somewhat unclear to me if this is a good -stable candidate. ] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1364045796-10720-2-git-send-email-konrad.wilk@oracle.com Tested-by: Josh Boyer <jwboyer@redhat.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> SEE NOTE ABOVE
2013-03-04x86: Make Linux guest support optionalBorislav Petkov1-2/+1
Put all config options needed to run Linux as a guest behind a CONFIG_HYPERVISOR_GUEST menu so that they don't get built-in by default but be selectable by the user. Also, make all units which depend on x86_hyper, depend on this new symbol so that compilation doesn't fail when CONFIG_HYPERVISOR_GUEST is disabled but those units assume its presence. Sort options in the new HYPERVISOR_GUEST menu, adapt config text and drop redundant select. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1362428421-9244-3-git-send-email-bp@alien8.de Cc: Dmitry Torokhov <dtor@vmware.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-21Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Peter Anvin: "This is a huge set of several partly interrelated (and concurrently developed) changes, which is why the branch history is messier than one would like. The *really* big items are two humonguous patchsets mostly developed by Yinghai Lu at my request, which completely revamps the way we create initial page tables. In particular, rather than estimating how much memory we will need for page tables and then build them into that memory -- a calculation that has shown to be incredibly fragile -- we now build them (on 64 bits) with the aid of a "pseudo-linear mode" -- a #PF handler which creates temporary page tables on demand. This has several advantages: 1. It makes it much easier to support things that need access to data very early (a followon patchset uses this to load microcode way early in the kernel startup). 2. It allows the kernel and all the kernel data objects to be invoked from above the 4 GB limit. This allows kdump to work on very large systems. 3. It greatly reduces the difference between Xen and native (Xen's equivalent of the #PF handler are the temporary page tables created by the domain builder), eliminating a bunch of fragile hooks. The patch series also gets us a bit closer to W^X. Additional work in this pull is the 64-bit get_user() work which you were also involved with, and a bunch of cleanups/speedups to __phys_addr()/__pa()." * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (105 commits) x86, mm: Move reserving low memory later in initialization x86, doc: Clarify the use of asm("%edx") in uaccess.h x86, mm: Redesign get_user with a __builtin_choose_expr hack x86: Be consistent with data size in getuser.S x86, mm: Use a bitfield to mask nuisance get_user() warnings x86/kvm: Fix compile warning in kvm_register_steal_time() x86-32: Add support for 64bit get_user() x86-32, mm: Remove reference to alloc_remap() x86-32, mm: Remove reference to resume_map_numa_kva() x86-32, mm: Rip out x86_32 NUMA remapping code x86/numa: Use __pa_nodebug() instead x86: Don't panic if can not alloc buffer for swiotlb mm: Add alloc_bootmem_low_pages_nopanic() x86, 64bit, mm: hibernate use generic mapping_init x86, 64bit, mm: Mark data/bss/brk to nx x86: Merge early kernel reserve for 32bit and 64bit x86: Add Crash kernel low reservation x86, kdump: Remove crashkernel range find limit for 64bit memblock: Add memblock_mem_size() x86, boot: Not need to check setup_header version for setup_data ...