Age | Commit message (Collapse) | Author | Files | Lines |
|
With the updated eVMCSv1 definition, there's no known 'problematic'
controls which are exposed in VMX control MSRs but are not present in
eVMCSv1: all known Hyper-V versions either don't expose the new fields
by not setting bits in the VMX feature controls or support the new
eVMCS revision.
Get rid of VMX control MSRs filtering for KVM on Hyper-V.
Note: VMX control MSRs filtering for Hyper-V on KVM
(nested_evmcs_filter_control_msr()) stays as even the updated eVMCSv1
definition doesn't have all the features implemented by KVM and some
fields are still missing. Moreover, nested_evmcs_filter_control_msr()
has to support the original eVMCSv1 version when VMM wishes so.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-17-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enlightened VMCS v1 got updated and now includes the required fields
for loading PERF_GLOBAL_CTRL upon VMENTER/VMEXIT features. For KVM on
Hyper-V enablement, KVM can just observe VMX control MSRs and use the
features (with or without eVMCS) when possible.
Hyper-V on KVM is messier as Windows 11 guests fail to boot if the
controls are advertised and a new PV feature flag, CPUID.0x4000000A.EBX
BIT(0), is not set. Honor the Hyper-V CPUID feature flag to play nice
with Windows guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-16-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check VMX features on tertiary execution control in VMCS config setup.
Sub-features in tertiary execution control to be enabled are adjusted
according to hardware capabilities although no sub-feature is enabled
in this patch.
EVMCSv1 doesn't support tertiary VM-execution control, so disable it
when EVMCSv1 is in use. And define the auxiliary functions for Tertiary
control field here, using the new BUILD_CONTROLS_SHADOW().
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419153400.11642-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V TLFS explicitly forbids VMREAD and VMWRITE instructions when
Enlightened VMCS interface is in use:
"Any VMREAD or VMWRITE instructions while an enlightened VMCS is
active is unsupported and can result in unexpected behavior.""
Windows 11 + WSL2 seems to ignore this, attempts to VMREAD VMCS field
0x4404 ("VM-exit interruption information") are observed. Failing
these attempts with nested_vmx_failInvalid() makes such guests
unbootable.
Microsoft confirms this is a Hyper-V bug and claims that it'll get fixed
eventually but for the time being we need a workaround. (Temporary) allow
VMREAD to get data from the currently loaded Enlightened VMCS.
Note: VMWRITE instructions remain forbidden, it is not clear how to
handle them properly and hopefully won't ever be needed.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation to allowing reads from Enlightened VMCS from
handle_vmread(), implement evmcs_field_offset() to get the correct
read offset. get_evmcs_offset(), which is being used by KVM-on-Hyper-V,
is almost what's needed but a few things need to be adjusted. First,
WARN_ON() is unacceptable for handle_vmread() as any field can (in
theory) be supplied by the guest and not all fields are defined in
eVMCS v1. Second, we need to handle 'holes' in eVMCS (missing fields).
It also sounds like a good idea to WARN_ON() if such fields are ever
accessed by KVM-on-Hyper-V.
Implement dedicated evmcs_field_offset() helper.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field,
PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes
sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too.
Note, none of the currently existing Windows/Hyper-V versions are known
to enable 'save VMX-preemption timer value' when eVMCS is in use, the
change is aimed at making the filtering future proof.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vmlinux.o: warning: objtool: vmx_update_host_rsp()+0x64: call to evmcs_write64() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210624095148.126956644@infradead.org
|
|
The ROL16(val, n) macro is repeatedly defined in several vmcs-related
files, and it has never been used outside the KVM context.
Let's move it to vmcs.h without any intended functional changes.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20210809093410.59304-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unlike regular set_current_vmptr(), nested_vmx_handle_enlightened_vmptrld()
can not be called directly from vmx_set_nested_state() as KVM may not have
all the information yet (e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not be
restored yet). Enlightened VMCS is mapped later while getting nested state
pages. In the meantime, vmx->nested.hv_evmcs_vmptr remains 'EVMPTR_INVALID'
and it's indistinguishable from 'evmcs is not in use' case. This leads to
certain issues, in particular, if KVM_GET_NESTED_STATE is called right
after KVM_SET_NESTED_STATE, KVM_STATE_NESTED_EVMCS flag in the resulting
state will be unset (and such state will later fail to load).
Introduce 'EVMPTR_MAP_PENDING' state to detect not-yet-mapped eVMCS after
restore. With this, the 'is_guest_mode(vcpu)' hack in vmx_has_valid_vmcs12()
is no longer needed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of checking 'vmx->nested.hv_evmcs' use '-1' in
'vmx->nested.hv_evmcs_vmptr' to indicate 'evmcs is not in use' state. This
matches how we check 'vmx->nested.current_vmptr'. Introduce EVMPTR_INVALID
and evmptr_is_valid() and use it instead of raw '-1' check as a preparation
to adding other 'special' values.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It was noticed that evmcs_sanitize_exec_ctrls() is not being executed
nowadays despite the code checking 'enable_evmcs' static key looking
correct. Turns out, static key magic doesn't work in '__init' section
(and it is unclear when things changed) but setup_vmcs_config() is called
only once per CPU so we don't really need it to. Switch to checking
'enlightened_vmcs' instead, it is supposed to be in sync with
'enable_evmcs'.
Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded
extra newline from it.
Reported-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201014143346.2430936-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
nested_vmx_handle_enlightened_vmptrld() fails in two cases:
- when we fail to kvm_vcpu_map() the supplied GPA
- when revision_id is incorrect.
Genuine Hyper-V raises #UD in the former case (at least with *some*
incorrect GPAs) and does VMfailInvalid() in the later. KVM doesn't do
anything so L1 just gets stuck retrying the same faulty VMLAUNCH.
nested_vmx_handle_enlightened_vmptrld() has two call sites:
nested_vmx_run() and nested_get_vmcs12_pages(). The former needs to queue
do much: the failure there happens after migration when L2 was running (and
L1 did something weird like wrote to VP assist page from a different vCPU),
just kill L1 with KVM_EXIT_INTERNAL_ERROR.
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Squash kbuild autopatch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
guests
Sane L1 hypervisors are not supposed to turn any of the unsupported VMX
controls on for its guests and nested_vmx_check_controls() checks for
that. This is, however, not the case for the controls which are supported
on the host but are missing in enlightened VMCS and when eVMCS is in use.
It would certainly be possible to add these missing checks to
nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems
preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on
non-eVMCS guests by doing less unrelated checks. Create a separate
nested_evmcs_check_controls() for this purpose.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS
with default (matching CPU model) values and in case eVMCS is also enabled,
fails.
It would be possible to drop VMX feature filtering completely and make
this a guest's responsibility: if it decides to use eVMCS it should know
which fields are available and which are not. Hyper-V mostly complies to
this, however, there are some problematic controls:
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES
VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL
which Hyper-V enables. As there are no corresponding fields in eVMCS, we
can't handle this properly in KVM. This is a Hyper-V issue.
Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(),
and do the bare minimum (only clear controls which are known to cause issues).
This allows userspace to keep setting controls it wants and at the same
time hides them from the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V provides direct tlb flush function which helps
L1 Hypervisor to handle Hyper-V tlb flush request from
L2 guest. Add the function support for VMX.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When Enlightened VMCS is in use, it is valid to do VMCLEAR and,
according to TLFS, this should "transition an enlightened VMCS from the
active to the non-active state". It is, however, wrong to assume that
it is only valid to do VMCLEAR for the eVMCS which is currently active
on the vCPU performing VMCLEAR.
Currently, the logic in handle_vmclear() is broken: in case, there is no
active eVMCS on the vCPU doing VMCLEAR we treat the argument as a 'normal'
VMCS and kvm_vcpu_write_guest() to the 'launch_state' field irreversibly
corrupts the memory area.
So, in case the VMCLEAR argument is not the current active eVMCS on the
vCPU, how can we know if the area it is pointing to is a normal or an
enlightened VMCS?
Thanks to the bug in Hyper-V (see commit 72aeb60c52bf7 ("KVM: nVMX: Verify
eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD")) we can
not, the revision can't be used to distinguish between them. So let's
assume it is always enlightened in case enlightened vmentry is enabled in
the assist page. Also, check if vmx->nested.enlightened_vmcs_enabled to
minimize the impact for 'unenlightened' workloads.
Fixes: b8bbab928fb1 ("KVM: nVMX: implement enlightened VMPTRLD and VMCLEAR")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The upcoming KVM_GET_SUPPORTED_HV_CPUID ioctl will need to return
Enlightened VMCS version in HYPERV_CPUID_NESTED_FEATURES.EAX when
it was enabled.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The header, evmcs.h, already exists and contains a fair amount of code,
but there are a few pieces in vmx.c that can be moved verbatim. In
addition, move an array definition to evmcs.c to prepare for multiple
consumers of evmcs.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
VMX specific files now reside in a dedicated subdirectory, i.e. the
file name prefix is redundant.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|