summaryrefslogtreecommitdiffstats
path: root/arch/x86/kvm/emulate.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-3/+5
Pull kvm fixes from Paolo Bonzini: - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr - Documentation improvements - Prevent module exit until all VMs are freed - PMU Virtualization fixes - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences - Other miscellaneous bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: fix sending PV IPI KVM: x86/mmu: do compare-and-exchange of gPTE via the user address KVM: x86: Remove redundant vm_entry_controls_clearbit() call KVM: x86: cleanup enter_rmode() KVM: x86: SVM: fix tsc scaling when the host doesn't support it kvm: x86: SVM: remove unused defines KVM: x86: SVM: move tsc ratio definitions to svm.h KVM: x86: SVM: fix avic spec based definitions again KVM: MIPS: remove reference to trap&emulate virtualization KVM: x86: document limitations of MSR filtering KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr KVM: x86/emulator: Emulate RDPID only if it is enabled in guest KVM: x86/pmu: Fix and isolate TSX-specific performance event logic KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs KVM: x86: Trace all APICv inhibit changes and capture overall status KVM: x86: Add wrappers for setting/clearing APICv inhibits KVM: x86: Make APICv inhibit reasons an enum and cleanup naming KVM: X86: Handle implicit supervisor access with SMAP KVM: X86: Rename variable smap to not_smap in permission_fault() ...
2022-04-02KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsrHou Wenlong1-2/+2
If MSR access is rejected by MSR filtering, kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED, and the return value is only handled well for rdmsr/wrmsr. However, some instruction emulation and state transition also use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger some unexpected results if MSR access is rejected, E.g. RDPID emulation would inject a #UD but RDPID wouldn't cause a exit when RDPID is supported in hardware and ENABLE_RDTSCP is set. And it would also cause failure when load MSR at nested entry/exit. Since msr filtering is based on MSR bitmap, it is better to only do MSR filtering for rdmsr/wrmsr. Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: x86/emulator: Emulate RDPID only if it is enabled in guestHou Wenlong1-1/+3
When RDTSCP is supported but RDPID is not supported in host, RDPID emulation is available. However, __kvm_get_msr() would only fail when RDTSCP/RDPID both are disabled in guest, so the emulator wouldn't inject a #UD when RDPID is disabled but RDTSCP is enabled in guest. Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID") Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds1-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-27/+44
Pull kvm updates from Paolo Bonzini: "ARM: - Proper emulation of the OSLock feature of the debug architecture - Scalibility improvements for the MMU lock when dirty logging is on - New VMID allocator, which will eventually help with SVA in VMs - Better support for PMUs in heterogenous systems - PSCI 1.1 support, enabling support for SYSTEM_RESET2 - Implement CONFIG_DEBUG_LIST at EL2 - Make CONFIG_ARM64_ERRATUM_2077057 default y - Reduce the overhead of VM exit when no interrupt is pending - Remove traces of 32bit ARM host support from the documentation - Updated vgic selftests - Various cleanups, doc updates and spelling fixes RISC-V: - Prevent KVM_COMPAT from being selected - Optimize __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support s390: - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests - add Claudio Imbrenda as maintainer - first step to do proper storage key checking x86: - Continue switching kvm_x86_ops to static_call(); introduce static_call_cond() and __static_call_ret0 when applicable. - Cleanup unused arguments in several functions - Synthesize AMD 0x80000021 leaf - Fixes and optimization for Hyper-V sparse-bank hypercalls - Implement Hyper-V's enlightened MSR bitmap for nested SVM - Remove MMU auditing - Eager splitting of page tables (new aka "TDP" MMU only) when dirty page tracking is enabled - Cleanup the implementation of the guest PGD cache - Preparation for the implementation of Intel IPI virtualization - Fix some segment descriptor checks in the emulator - Allow AMD AVIC support on systems with physical APIC ID above 255 - Better API to disable virtualization quirks - Fixes and optimizations for the zapping of page tables: - Zap roots in two passes, avoiding RCU read-side critical sections that last too long for very large guests backed by 4 KiB SPTEs. - Zap invalid and defunct roots asynchronously via concurrency-managed work queue. - Allowing yielding when zapping TDP MMU roots in response to the root's last reference being put. - Batch more TLB flushes with an RCU trick. Whoever frees the paging structure now holds RCU as a proxy for all vCPUs running in the guest, i.e. to prolongs the grace period on their behalf. It then kicks the the vCPUs out of guest mode before doing rcu_read_unlock(). Generic: - Introduce __vcalloc and use it for very large allocations that need memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) KVM: use kvcalloc for array allocations KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2 kvm: x86: Require const tsc for RT KVM: x86: synthesize CPUID leaf 0x80000021h if useful KVM: x86: add support for CPUID leaf 0x80000021 KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()" kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU KVM: arm64: fix typos in comments KVM: arm64: Generalise VM features into a set of flags KVM: s390: selftests: Add error memop tests KVM: s390: selftests: Add more copy memop tests KVM: s390: selftests: Add named stages for memop test KVM: s390: selftests: Add macro as abstraction for MEM_OP KVM: s390: selftests: Split memop tests KVM: s390x: fix SCK locking RISC-V: KVM: Implement SBI HSM suspend call RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function RISC-V: Add SBI HSM suspend related defines RISC-V: KVM: Implement SBI v0.3 SRST extension ...
2022-03-22kvm/emulate: Fix SETcc emulation for ENDBRPeter Zijlstra1-4/+6
Companion patch for commit fe83f5eae432 ("kvm/emulate: Fix SETcc emulation function offsets with SLS"), now extending it to cover the additional ENDBR instruction. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/YjMVpfe%2f9ldmWX8W@hirez.programming.kicks-ass.net
2022-03-22Merge branch 'kvm/kvm-sls-fix'Peter Zijlstra1-2/+17
Sync with the last minute SLS fix to extend it for IBT. Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2022-03-22Merge tag 'perf-core-2022-03-21' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event updates from Ingo Molnar: - Fix address filtering for Intel/PT,ARM/CoreSight - Enable Intel/PEBS format 5 - Allow more fixed-function counters for x86 - Intel/PT: Enable not recording Taken-Not-Taken packets - Add a few branch-types * tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT perf: Add irq and exception return branch types perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses perf/x86/intel/pt: Add a capability and config bit for disabling TNTs perf/x86/intel/pt: Add a capability and config bit for event tracing perf/x86/intel: Increase max number of the fixed counters KVM: x86: use the KVM side max supported fixed counter perf/x86/intel: Enable PEBS format 5 perf/core: Allow kernel address filter when not filtering the kernel perf/x86/intel/pt: Fix address filter config for 32-bit kernel perf/core: Fix address filter parser for multiple filters x86: Share definition of __is_canonical_address() perf/x86/intel/pt: Relax address filter validation
2022-03-21Merge tag 'bounds-fixes-v5.18-rc1' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull bounds fixes from Kees Cook: "These are a handful of buffer and array bounds fixes that I've been carrying in preparation for the coming memcpy improvements and the enabling of '-Warray-bounds' globally. There are additional similar fixes in other maintainer's trees, but these ended up getting carried by me. :)" * tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: media: omap3isp: Use struct_group() for memcpy() region tpm: vtpm_proxy: Check length to avoid compiler warning alpha: Silence -Warray-bounds warnings m68k: cmpxchg: Dereference matching size intel_th: msu: Use memset_startat() for clearing hw header KVM: x86: Replace memset() "optimization" with normal per-field writes
2022-03-20kvm/emulate: Fix SETcc emulation function offsets with SLSBorislav Petkov1-2/+17
The commit in Fixes started adding INT3 after RETs as a mitigation against straight-line speculation. The fastop SETcc implementation in kvm's insn emulator uses macro magic to generate all possible SETcc functions and to jump to them when emulating the respective instruction. However, it hardcodes the size and alignment of those functions to 4: a three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an INT3 that gets slapped after the RET, which brings the whole scheme out of alignment: 15: 0f 90 c0 seto %al 18: c3 ret 19: cc int3 1a: 0f 1f 00 nopl (%rax) 1d: 0f 91 c0 setno %al 20: c3 ret 21: cc int3 22: 0f 1f 00 nopl (%rax) 25: 0f 92 c0 setb %al 28: c3 ret 29: cc int3 and this explodes like this: int3: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1 Hardware name: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012 RIP: 0010:setc+0x5/0x8 [kvm] Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \ 1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \ 0f 94 c0 c3 cc 0f 1f 00 0f 95 c0 Call Trace: <TASK> ? x86_emulate_insn [kvm] ? x86_emulate_instruction [kvm] ? vmx_handle_exit [kvm_intel] ? kvm_arch_vcpu_ioctl_run [kvm] ? kvm_vcpu_ioctl [kvm] ? __x64_sys_ioctl ? do_syscall_64 ? entry_SYSCALL_64_after_hwframe </TASK> Raise the alignment value when SLS is enabled and use a macro for that instead of hard-coding naked numbers. Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Reported-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Jamie Heilman <jamie@audible.transient.net> Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net [Add a comment and a bit of safety checking, since this is going to be changed again for IBT support. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15x86/ibt,kvm: Add ENDBR to fastopsPeter Zijlstra1-2/+4
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154318.168850084@infradead.org
2022-03-01KVM: x86/emulator: Move the unhandled outer privilege level logic of far ↵Hou Wenlong1-6/+8
return into __load_segment_descriptor() Outer-privilege level return is not implemented in emulator, move the unhandled logic into __load_segment_descriptor to make it easier to understand why the checks for RET are incomplete. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <5b7188e6388ac9f4567d14eab32db9adf3e00119.1644292363.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-01KVM: x86/emulator: Fix wrong privilege check for code segment in ↵Hou Wenlong1-8/+23
__load_segment_descriptor() Code segment descriptor can be loaded by jmp/call/ret, iret and int. The privilege checks are different between those instructions above realmode. Although, the emulator has use x86_transfer_type enumerate to differentiate them, but it is not really used in __load_segment_descriptor(). Note, far jump/call to call gate, task gate or task state segment are not implemented in emulator. As for far jump/call to code segment, if DPL > CPL for conforming code or (RPL > CPL or DPL != CPL) for non-conforming code, it should trigger #GP. The current checks are ok. As for far return, if RPL < CPL or DPL > RPL for conforming code or DPL != RPL for non-conforming code, it should trigger #GP. Outer level return is not implemented above virtual-8086 mode in emulator. So it implies that RPL <= CPL, but the current checks wouldn't trigger #GP if RPL < CPL. As for code segment loading in task switch, if DPL > RPL for conforming code or DPL != RPL for non-conforming code, it should trigger #TS. Since segment selector is loaded before segment descriptor when load state from tss, it implies that RPL = CPL, so the current checks are ok. The only problem in current implementation is missing RPL < CPL check for far return. However, change code to follow the manual is better. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <e01f5ea70fc1f18f23da1182acdbc5c97c0e5886.1644292363.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-01KVM: x86/emulator: Defer not-present segment check in ↵Hou Wenlong1-5/+9
__load_segment_descriptor() Per Intel's SDM on the "Instruction Set Reference", when loading segment descriptor, not-present segment check should be after all type and privilege checks. But the emulator checks it first, then #NP is triggered instead of #GP if privilege fails and segment is not present. Put not-present segment check after type and privilege checks in __load_segment_descriptor(). Fixes: 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c) Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-13KVM: x86: Replace memset() "optimization" with normal per-field writesSean Christopherson1-2/+7
Explicitly zero select fields in the emulator's decode cache instead of zeroing the fields via a gross memset() that spans six fields. gcc and clang are both clever enough to batch the first five fields into a single quadword MOV, i.e. memset() and individually zeroing generate identical code. Removing the wart also prepares KVM for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(). No functional change intended. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/lkml/YR0jIEzEcUom/7rd@google.com Signed-off-by: Kees Cook <keescook@chromium.org>
2022-02-10KVM: x86/emulate: Remove unused "tss_selector" of task_switch_{16, 32}()Jinrong Liang1-7/+4
The "u16 tss_selector" parameter of task_switch_{16, 32}() is not used, so remove it. No functional change intended. Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220125095909.38122-16-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: x86/emulate: Remove unused "ctxt" of setup_syscalls_segments()Jinrong Liang1-5/+4
The "struct x86_emulate_ctxt *ctxt" parameter of setup_syscalls_segments() is not used, so remove it. No functional change intended. Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220125095909.38122-15-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-02x86: Share definition of __is_canonical_address()Adrian Hunter1-2/+2
Reduce code duplication by moving canonical address code to a common header file. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220131072453.2839535-3-adrian.hunter@intel.com
2022-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-24/+31
Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...
2022-01-07KVM: x86: Update vPMCs when retiring branch instructionsEric Hankland1-24/+31
When KVM retires a guest branch instruction through emulation, increment any vPMCs that are configured to monitor "branch instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by: Eric Hankland <ehankland@google.com> [jmattson: - Split the code to increment "branch instructions retired" into a separate commit. - Moved/consolidated the calls to kvm_pmu_trigger_event() in the emulation of VMLAUNCH/VMRESUME to accommodate the evolution of that code. ] Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20211130074221.93635-7-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11x86/kvm: Remove .fixup usagePeter Zijlstra1-12/+4
KVM instruction emulation has a gnarly hack where the .fixup does a return, however there's already a ret right after the 10b label, so mark that as 11 and have the exception clear %esi to remove the .fixup. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20211110101325.722157053@infradead.org
2021-12-08x86: Prepare inline-asm for straight-line-speculationPeter Zijlstra1-2/+2
Replace all ret/retq instructions with ASM_RET in preparation of making it more than a single instruction. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211204134907.964635458@infradead.org
2021-10-31Merge tag 'kvmarm-5.16' of ↵Paolo Bonzini1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.16 - More progress on the protected VM front, now with the full fixed feature set as well as the limitation of some hypercalls after initialisation. - Cleanup of the RAZ/WI sysreg handling, which was pointlessly complicated - Fixes for the vgic placement in the IPA space, together with a bunch of selftests - More memcg accounting of the memory allocated on behalf of a guest - Timer and vgic selftests - Workarounds for the Apple M1 broken vgic implementation - KConfig cleanups - New kvmarm.mode=none option, for those who really dislike us
2021-10-22KVM: emulate: Comment on difference between RDPMC implementation and manualWanpeng Li1-0/+5
SDM mentioned that, RDPMC: IF (((CR4.PCE = 1) or (CPL = 0) or (CR0.PE = 0)) and (ECX indicates a supported counter)) THEN EAX := counter[31:0]; EDX := ZeroExtend(counter[MSCB:32]); ELSE (* ECX is not valid or CR4.PCE is 0 and CPL is 1, 2, or 3 and CR0.PE is 1 *) #GP(0); FI; Let's add a comment why CR0.PE isn't tested since it's impossible for CPL to be >0 if CR0.PE=0. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1634724836-73721-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-03kvm: fix objtool relocation warningLinus Torvalds1-1/+0
The recent change to make objtool aware of more symbol relocation types (commit 24ff65257375: "objtool: Teach get_alt_entry() about more relocation types") also added another check, and resulted in this objtool warning when building kvm on x86: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception The reason seems to be that kvm_fastop_exception() is marked as a global symbol, which causes the relocation to ke kept around for objtool. And at the same time, the kvm_fastop_exception definition (which is done as an inline asm statement) doesn't actually set the type of the global, which then makes objtool unhappy. The minimal fix is to just not mark kvm_fastop_exception as being a global symbol. It's only used in that one compilation unit anyway, so it was always pointless. That's how all the other local exception table labels are done. I'm not entirely happy about the kinds of games that the kvm code plays with doing its own exception handling, and the fact that it confused objtool is most definitely a symptom of the code being a bit too subtle and ad-hoc. But at least this trivial one-liner makes objtool no longer upset about what is going on. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Cc: Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-22kvm: fix wrong exception emulation in check_rdtscHou Wenlong1-1/+1
According to Intel's SDM Vol2 and AMD's APM Vol3, when CR4.TSD is set, use rdtsc/rdtscp instruction above privilege level 0 should trigger a #GP. Fixes: d7eb82030699e ("KVM: SVM: Add intercept checks for remaining group7 instructions") Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com> Message-Id: <1297c0dd3f1bb47a6d089f850b629c7aa0247040.1629257115.git.houwenlong93@linux.alibaba.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Drop "pre_" from enter/leave_smm() helpersSean Christopherson1-3/+3
Now that .post_leave_smm() is gone, drop "pre_" from the remaining helpers. The helpers aren't invoked purely before SMI/RSM processing, e.g. both helpers are invoked after state is snapshotted (from regs or SMRAM), and the RSM helper is invoked after some amount of register state has been stuffed. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Drop .post_leave_smm(), i.e. the manual post-RSM MMU resetSean Christopherson1-2/+8
Drop the .post_leave_smm() emulator callback, which at this point is just a wrapper to kvm_mmu_reset_context(). The manual context reset is unnecessary, because unlike enter_smm() which calls vendor MSR/CR helpers directly, em_rsm() bounces through the KVM helpers, e.g. kvm_set_cr4(), which are responsible for processing side effects. em_rsm() is already subtly relying on this behavior as it doesn't manually do kvm_update_cpuid_runtime(), e.g. to recognize CR4.OSXSAVE changes. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Replace .set_hflags() with dedicated .exiting_smm() helperSean Christopherson1-2/+1
Replace the .set_hflags() emulator hook with a dedicated .exiting_smm(), moving the SMM and SMM_INSIDE_NMI flag handling out of the emulator in the process. This is a step towards consolidating much of the logic in kvm_smm_changed(), including the SMM hflags updates. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Emulate triple fault shutdown if RSM emulation failsSean Christopherson1-5/+7
Use the recently introduced KVM_REQ_TRIPLE_FAULT to properly emulate shutdown if RSM from SMM fails. Note, entering shutdown after clearing the SMM flag and restoring NMI blocking is architecturally correct with respect to AMD's APM, which KVM also uses for SMRAM layout and RSM NMI blocking behavior. The APM says: An RSM causes a processor shutdown if an invalid-state condition is found in the SMRAM state-save area. Only an external reset, external processor-initialization, or non-maskable external interrupt (NMI) can cause the processor to leave the shutdown state. Of note is processor-initialization (INIT) as a valid shutdown wake event, as INIT is blocked by SMM, implying that entering shutdown also forces the CPU out of SMM. For recent Intel CPUs, restoring NMI blocking is technically wrong, but so is restoring NMI blocking in the first place, and Intel's RSM "architecture" is such a mess that just about anything is allowed and can be justified as micro-architectural behavior. Per the SDM: On Pentium 4 and later processors, shutdown will inhibit INTR and A20M but will not change any of the other inhibits. On these processors, NMIs will be inhibited if no action is taken in the SMI handler to uninhibit them (see Section 34.8). where Section 34.8 says: When the processor enters SMM while executing an NMI handler, the processor saves the SMRAM state save map but does not save the attribute to keep NMI interrupts disabled. Potentially, an NMI could be latched (while in SMM or upon exit) and serviced upon exit of SMM even though the previous NMI handler has still not completed. I.e. RSM unconditionally unblocks NMI, but shutdown on RSM does not, which is in direct contradiction of KVM's behavior. But, as mentioned above, KVM follows AMD architecture and restores NMI blocking on RSM, so that micro-architectural detail is already lost. And for Pentium era CPUs, SMI# can break shutdown, meaning that at least some Intel CPUs fully leave SMM when entering shutdown: In the shutdown state, Intel processors stop executing instructions until a RESET#, INIT# or NMI# is asserted. While Pentium family processors recognize the SMI# signal in shutdown state, P6 family and Intel486 processors do not. In other words, the fact that Intel CPUs have implemented the two extremes gives KVM carte blanche when it comes to honoring Intel's architecture for handling shutdown during RSM. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-3-seanjc@google.com> [Return X86EMUL_CONTINUE after triple fault. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Move FPU register accessors into fpu.hSiddharth Chandrasekaran1-120/+17
Hyper-v XMM fast hypercalls use XMM registers to pass input/output parameters. To access these, hyperv.c can reuse some FPU register accessors defined in emulator.c. Move them to a common location so both can access them. While at it, reorder the parameters of these accessor methods to make them more readable. Cc: Alexander Graf <graf@amazon.com> Cc: Evgeny Iakovlev <eyakovl@amazon.de> Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de> Message-Id: <01a85a6560714d4d3637d3d86e5eba65073318fa.1622019133.git.sidcha@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-28KVM: X86: Kill off ctxt->udWanpeng Li1-2/+3
ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by passing emulation_type to x86_decode_insn() and dropping ctxt->ud altogether. Tracking that info in ctxt for literally one call is silly. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <1622160097-37633-2-git-send-email-wanpengli@tencent.com>
2021-05-07KVM: x86: Move RDPID emulation intercept to its own enumSean Christopherson1-1/+1
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP. Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept. Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210504171734.1434054-5-seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-77/+3
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-26KVM: x86: Remove emulator's broken checks on CR0/CR3/CR4 loadsSean Christopherson1-77/+3
Remove the emulator's checks for illegal CR0, CR3, and CR4 values, as the checks are redundant, outdated, and in the case of SEV's C-bit, broken. The emulator manually calculates MAXPHYADDR from CPUID and neglects to mask off the C-bit. For all other checks, kvm_set_cr*() are a superset of the emulator checks, e.g. see CR4.LA57. Fixes: a780a3ea6282 ("KVM: X86: Fix reserved bits check for MOV to CR3") Cc: Babu Moger <babu.moger@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210422022128.3464144-2-seanjc@google.com> Cc: stable@vger.kernel.org [Unify check_cr_read and check_cr_write. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18x86: Fix various typos in commentsIngo Molnar1-1/+1
Fix ~144 single-word typos in arch/x86/ code comments. Doing this in a single commit should reduce the churn. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-kernel@vger.kernel.org
2021-02-09KVM: x86: Restore all 64 bits of DR6 and DR7 during RSM on x86-64Sean Christopherson1-2/+2
Restore the full 64-bit values of DR6 and DR7 when emulating RSM on x86-64, as defined by both Intel's SDM and AMD's APM. Note, bits 63:32 of DR6 and DR7 are reserved, so this is a glorified nop unless the SMM handler is poking into SMRAM, which it most definitely shouldn't be doing since both Intel and AMD list the DR6 and DR7 fields as read-only. Fixes: 660a5d517aaa ("KVM: x86: save/load state on SMM switch") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210205012458.3872687-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-09KVM: x86: Remove misleading DR6/DR7 adjustments from RSM emulationSean Christopherson1-4/+4
Drop the DR6/7 volatile+fixed bits adjustments in RSM emulation, which are redundant and misleading. The necessary adjustments are made by kvm_set_dr(), which properly sets the fixed bits that are conditional on the vCPU model. Note, KVM incorrectly reads only bits 31:0 of the DR6/7 fields when emulating RSM on x86-64. On the plus side for this change, that bug makes removing "& DRx_VOLATILE" a nop. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210205012458.3872687-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04KVM: X86: Rename DR6_INIT to DR6_ACTIVE_LOWChenyi Qiang1-1/+1
DR6_INIT contains the 1-reserved bits as well as the bit that is cleared to 0 when the condition (e.g. RTM) happens. The value can be used to initialize dr6 and also be the XOR mask between the #DB exit qualification (or payload) and DR6. Concerning that DR6_INIT is used as initial value only once, rename it to DR6_ACTIVE_LOW and apply it in other places, which would make the incoming changes for bus lock debug exception more simple. Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20210202090433.13441-2-chenyi.qiang@intel.com> [Define DR6_FIXED_1 from DR6_ACTIVE_LOW and DR6_VOLATILE. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-02KVM: x86: Update emulator context mode if SYSENTER xfers to 64-bit modeSean Christopherson1-0/+2
Set the emulator context to PROT64 if SYSENTER transitions from 32-bit userspace (compat mode) to a 64-bit kernel, otherwise the RIP update at the end of x86_emulate_insn() will incorrectly truncate the new RIP. Note, this bug is mostly limited to running an Intel virtual CPU model on an AMD physical CPU, as other combinations of virtual and physical CPUs do not trigger full emulation. On Intel CPUs, SYSENTER in compatibility mode is legal, and unconditionally transitions to 64-bit mode. On AMD CPUs, SYSENTER is illegal in compatibility mode and #UDs. If the vCPU is AMD, KVM injects a #UD on SYSENTER in compat mode. If the pCPU is Intel, SYSENTER will execute natively and not trigger #UD->VM-Exit (ignoring guest TLB shenanigans). Fixes: fede8076aab4 ("KVM: x86: handle wrap around 32-bit address space") Cc: stable@vger.kernel.org Signed-off-by: Jonny Barker <jonny@jonnybarker.com> [sean: wrote changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210202165546.2390296-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-13KVM: x86: clflushopt should be treated as a no-op by emulationDavid Edmondson1-1/+7
The instruction emulator ignores clflush instructions, yet fails to support clflushopt. Treat both similarly. Fixes: 13e457e0eebf ("KVM: x86: Emulator does not decode clflush well") Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20201103120400.240882-1-david.edmondson@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21KVM: x86: report negative values from wrmsr emulation to userspaceMaxim Levitsky1-2/+2
This will allow the KVM to report such errors (e.g -ENOMEM) to the userspace. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20201001112954.6258-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Allow deflecting unknown MSR accesses to user spaceAlexander Graf1-2/+16
MSRs are weird. Some of them are normal control registers, such as EFER. Some however are registers that really are model specific, not very interesting to virtualization workloads, and not performance critical. Others again are really just windows into package configuration. Out of these MSRs, only the first category is necessary to implement in kernel space. Rarely accessed MSRs, MSRs that should be fine tunes against certain CPU models and MSRs that contain information on the package level are much better suited for user space to process. However, over time we have accumulated a lot of MSRs that are not the first category, but still handled by in-kernel KVM code. This patch adds a generic interface to handle WRMSR and RDMSR from user space. With this, any future MSR that is part of the latter categories can be handled in user space. Furthermore, it allows us to replace the existing "ignore_msrs" logic with something that applies per-VM rather than on the full system. That way you can run productive VMs in parallel to experimental ones where you don't care about proper MSR handling. Signed-off-by: Alexander Graf <graf@amazon.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200925143422.21718-3-graf@amazon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: emulating RDPID failure shall return #UD rather than #GPRobert Hoo1-1/+1
Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or less what KVM is emulating when MSR_TSC_AUX is not available. In fact, there are no scenarios in which RDPID is supposed to #GP. Fixes: fb6d4d340e ("KVM: x86: emulate RDPID") Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <1598581422-76264-1-git-send-email-robert.hu@linux.intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-22Merge branch 'x86-seves-for-paolo' of ↵Paolo Bonzini1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
2020-09-12KVM: emulator: more strict rsm checks.Maxim Levitsky1-5/+17
Don't ignore return values in rsm_load_state_64/32 to avoid loading invalid state from SMM state area if it was tampered with by the guest. This is primarly intended to avoid letting guest set bits in EFER (like EFER.SVME when nesting is disabled) by manipulating SMM save area. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-05KVM: x86: emulate reserved nops from 0f/18 to 0f/1fPaolo Bonzini1-2/+6
Instructions starting with 0f18 up to 0f1f are reserved nops, except those that were assigned to MPX. These include the endbr markers used by CET. List them correctly in the opcode table. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-13KVM: x86: handle wrap around 32-bit address spacePaolo Bonzini1-0/+2
KVM is not handling the case where EIP wraps around the 32-bit address space (that is, outside long mode). This is needed both in vmx.c and in emulate.c. SVM with NRIPS is okay, but it can still print an error to dmesg due to integer overflow. Reported-by: Nick Peterson <everdox@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-33/+24
Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 12:45:47 +0000