summaryrefslogtreecommitdiffstats
path: root/arch/x86/kvm/cpuid.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-22Merge tag 'kvm-ppc-fixes-5.5-1' of ↵Paolo Bonzini1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.5 - Fix a bug where we try to do an ultracall on a system without an ultravisor.
2019-12-18kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBDJim Mattson1-1/+2
The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.80000008H:EBX.AMD_SSBD[bit 24] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 4c6903a0f9d76 ("KVM: x86: fix reporting of AMD speculation bug CPUID leaf") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBDJim Mattson1-1/+2
The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-04KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332)Paolo Bonzini1-1/+4
The bounds check was present in KVM_GET_SUPPORTED_CPUID but not KVM_GET_EMULATED_CPUID. Reported-by: syzbot+e3f4897236c4eeb8af4f@syzkaller.appspotmail.com Fixes: 84cffe499b94 ("kvm: Emulate MOVBE", 2013-10-29) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-27KVM x86: Move kvm cpuid support out of svmPeter Gonda1-0/+5
Memory encryption support does not have module parameter dependencies and can be moved into the general x86 cpuid __do_cpuid_ent function. This changes maintains current behavior of passing through all of CPUID.8000001F. Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUIDPaolo Bonzini1-2/+6
Because KVM always emulates CPUID, the CPUID clear bit (bit 1) of MSR_IA32_TSX_CTRL must be emulated "manually" by the hypervisor when performing said emulation. Right now neither kvm-intel.ko nor kvm-amd.ko implement MSR_IA32_TSX_CTRL but this will change in the next patch. Reviewed-by: Jim Mattson <jmattson@google.com> Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUIDJim Mattson1-1/+1
When the RDPID instruction is supported on the host, enumerate it in KVM_GET_SUPPORTED_CPUID. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-26KVM: x86: Expose XSAVEERPTR to the guestSebastian Andrzej Siewior1-3/+3
I was surprised to see that the guest reported `fxsave_leak' while the host did not. After digging deeper I noticed that the bits are simply masked out during enumeration. The XSAVEERPTR feature is actually a bug fix on AMD which means the kernel can disable a workaround. Pass XSAVEERPTR to the guest if available on the host. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-26kvm: x86: Enumerate support for CLZERO instructionJim Mattson1-2/+3
CLZERO is available to the guest if it is supported on the host. Therefore, enumerate support for the instruction in KVM_GET_SUPPORTED_CPUID whenever it is supported on the host. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-26kvm: x86: Use AMD CPUID semantics for AMD vCPUsJim Mattson1-2/+4
When the guest CPUID information represents an AMD vCPU, return all zeroes for queries of undefined CPUID leaves, whether or not they are in range. Signed-off-by: Jim Mattson <jmattson@google.com> Fixes: bd22f5cfcfe8f6 ("KVM: move and fix substitue search for missing CPUID entries") Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-26kvm: x86: Improve emulation of CPUID leaves 0BH and 1FHJim Mattson1-36/+47
For these CPUID leaves, the EDX output is not dependent on the ECX input (i.e. the SIGNIFCANT_INDEX flag doesn't apply to EDX). Furthermore, the low byte of the ECX output is always identical to the low byte of the ECX input. KVM does not produce the correct ECX and EDX outputs for any undefined subleaves beyond the first. Special-case these CPUID leaves in kvm_cpuid, so that the ECX and EDX outputs are properly generated for all undefined subleaves. Fixes: 0771671749b59a ("KVM: Enhance guest cpuid management") Fixes: a87f2d3a6eadab ("KVM: x86: Add Intel CPUID.1F cpuid emulation support") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-26kvm: x86: Fix a spurious -E2BIG in __do_cpuid_funcJim Mattson1-6/+10
Don't return -E2BIG from __do_cpuid_func when processing function 0BH or 1FH and the last interesting subleaf occupies the last allocated entry in the result array. Cc: Paolo Bonzini <pbonzini@redhat.com> Fixes: 831bf664e9c1fc ("KVM: Refactor and simplify kvm_dev_ioctl_get_supported_cpuid") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24kvm: x86: Add "significant index" flag to a few CPUID leavesJim Mattson1-0/+6
According to the Intel SDM, volume 2, "CPUID," the index is significant (or partially significant) for CPUID leaves 0FH, 10H, 12H, 17H, 18H, and 1FH. Add the corresponding flag to these CPUID leaves in do_host_cpuid(). Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Steve Rutherford <srutherford@google.com> Fixes: a87f2d3a6eadab ("KVM: x86: Add Intel CPUID.1F cpuid emulation support") Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86: Add support for user wait instructionsTao Xu1-1/+1
UMONITOR, UMWAIT and TPAUSE are a set of user wait instructions. This patch adds support for user wait instructions in KVM. Availability of the user wait instructions is indicated by the presence of the CPUID feature flag WAITPKG CPUID.0x07.0x0:ECX[5]. User wait instructions may be executed at any privilege level, and use 32bit IA32_UMWAIT_CONTROL MSR to set the maximum time. The behavior of user wait instructions in VMX non-root operation is determined first by the setting of the "enable user wait and pause" secondary processor-based VM-execution control bit 26. If the VM-execution control is 0, UMONITOR/UMWAIT/TPAUSE cause an invalid-opcode exception (#UD). If the VM-execution control is 1, treatment is based on the setting of the “RDTSC exiting†VM-execution control. Because KVM never enables RDTSC exiting, if the instruction causes a delay, the amount of time delayed is called here the physical delay. The physical delay is first computed by determining the virtual delay. If IA32_UMWAIT_CONTROL[31:2] is zero, the virtual delay is the value in EDX:EAX minus the value that RDTSC would return; if IA32_UMWAIT_CONTROL[31:2] is not zero, the virtual delay is the minimum of that difference and AND(IA32_UMWAIT_CONTROL,FFFFFFFCH). Because umwait and tpause can put a (psysical) CPU into a power saving state, by default we dont't expose it to kvm and enable it only when guest CPUID has it. Detailed information about user wait instructions can be found in the latest Intel 64 and IA-32 Architectures Software Developer's Manual. Co-developed-by: Jingqi Liu <jingqi.liu@intel.com> Signed-off-by: Jingqi Liu <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-22KVM: x86: use Intel speculation bugs and features as derived in generic x86 codePaolo Bonzini1-0/+6
Similar to AMD bits, set the Intel bits from the vendor-independent feature and bug flags, because KVM_GET_SUPPORTED_CPUID does not care about the vendor and they should be set on AMD processors as well. Suggested-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-22KVM: x86: fix reporting of AMD speculation bug CPUID leafPaolo Bonzini1-8/+13
The AMD_* bits have to be set from the vendor-independent feature and bug flags, because KVM_GET_SUPPORTED_CPUID does not care about the vendor and they should be set on Intel processors as well. On top of this, SSBD, STIBP and AMD_SSB_NO bit were not set, and VIRT_SSBD does not have to be added manually because it is a cpufeature that comes directly from the host's CPUID bit. Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15KVM: x86: expose AVX512_BF16 feature to guestJing Liu1-1/+11
AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point format (BF16) for deep learning optimization. Intel adds AVX512 BFLOAT16 feature in CooperLake, which is CPUID.7.1.EAX[5]. Detailed information of the CPUID bit can be found here, https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> [Fix type mismatch in min, changing constant "1" to "1u". - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-07-05KVM: cpuid: remove has_leaf_count from struct kvm_cpuid_paramPaolo Bonzini1-8/+3
The has_leaf_count member was originally added for KVM's paravirtualization CPUID leaves. However, since then the leaf count _has_ been added to those leaves as well, so we can drop that special case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05KVM: cpuid: rename do_cpuid_1_entPaolo Bonzini1-8/+8
do_cpuid_1_ent does not do the entire processing for a CPUID entry, it only retrieves the host's values. Rename it to match reality. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05KVM: cpuid: set struct kvm_cpuid_entry2 flags in do_cpuid_1_entPaolo Bonzini1-16/+14
do_cpuid_1_ent is typically called in two places by __do_cpuid_func for CPUID functions that have subleafs. Both places have to set the KVM_CPUID_FLAG_SIGNIFCANT_INDEX. Set that flag, and KVM_CPUID_FLAG_STATEFUL_FUNC as well, directly in do_cpuid_1_ent. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05KVM: cpuid: extract do_cpuid_7_mask and support multiple subleafsPaolo Bonzini1-47/+81
CPUID function 7 has multiple subleafs. Instead of having nested switch statements, move the logic to filter supported features to a separate function, and call it for each subleaf. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05KVM: cpuid: do_cpuid_ent works on a whole CPUID functionPaolo Bonzini1-47/+42
Rename it as well as __do_cpuid_ent and __do_cpuid_ent_emulated to have "func" in its name, and drop the index parameter which is always 0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-02kvm: x86: Pass through AMD_STIBP_ALWAYS_ON in GET_SUPPORTED_CPUIDJim Mattson1-1/+1
This bit is purely advisory. Passing it through to the guest indicates that the virtual processor, like the physical processor, prefers that STIBP is only set once during boot and not changed. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-02KVM: X86: Expose PV_SCHED_YIELD CPUID feature bit to guestWanpeng Li1-1/+2
Expose PV_SCHED_YIELD feature bit to guest, the guest can check this feature bit before using paravirtualized sched yield. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 see the copying file in the top level directory extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18kvm: x86: add host poll control msrsMarcelo Tosatti1-1/+2
Add an MSRs which allows the guest to disable host polling (specifically the cpuidle-haltpoll, when performing polling in the guest, disables host side polling). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-18KVM: x86: Add Intel CPUID.1F cpuid emulation supportLike Xu1-2/+7
Add support to expose Intel V2 Extended Topology Enumeration Leaf for some new systems with multiple software-visible die within each package. Because unimplemented and unexposed leaves should be explicitly reported as zero, there is no need to limit cpuid.0.eax to the maximum value of feature configuration but limit it to the highest leaf implemented in the current code. A single clamping seems sufficient and cheaper. Co-developed-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-04KVM: X86: Emulate MSR_IA32_MISC_ENABLE MWAIT bitWanpeng Li1-0/+10
MSR IA32_MISC_ENABLE bit 18, according to SDM: | When this bit is set to 0, the MONITOR feature flag is not set (CPUID.01H:ECX[bit 3] = 0). | This indicates that MONITOR/MWAIT are not supported. | | Software attempts to execute MONITOR/MWAIT will cause #UD when this bit is 0. | | When this bit is set to 1 (default), MONITOR/MWAIT are supported (CPUID.01H:ECX[bit 3] = 1). The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR bit, CPUID.01H:ECX[bit 3] is a better guard than kvm_mwait_in_guest(). kvm_mwait_in_guest() affects the behavior of MONITOR/MWAIT, not its guest visibility. This patch implements toggling of the CPUID bit based on guest writes to the MSR. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> [Fixes for backwards compatibility - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-24kvm: x86: Include CPUID leaf 0x8000001e in kvm's supported CPUIDJim Mattson1-0/+1
Kvm now supports extended CPUID functions through 0x8000001f. CPUID leaf 0x8000001e is AMD's Processor Topology Information leaf. This contains similar information to CPUID leaf 0xb (Intel's Extended Topology Enumeration leaf), and should be included in the output of KVM_GET_SUPPORTED_CPUID, even though userspace is likely to override some of this information based upon the configuration of the particular VM. Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Borislav Petkov <bp@suse.de> Fixes: 8765d75329a38 ("KVM: X86: Extend CPUID range to include new leaf") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-24kvm: x86: Include multiple indices with CPUID leaf 0x8000001dJim Mattson1-4/+3
Per the APM, "CPUID Fn8000_001D_E[D,C,B,A]X reports cache topology information for the cache enumerated by the value passed to the instruction in ECX, referred to as Cache n in the following description. To gather information for all cache levels, software must repeatedly execute CPUID with 8000_001Dh in EAX and ECX set to increasing values beginning with 0 until a value of 00h is returned in the field CacheType (EAX[4:0]) indicating no more cache descriptions are available for this processor." The termination condition is the same as leaf 4, so we can reuse that code block for leaf 0x8000001d. Fixes: 8765d75329a38 ("KVM: X86: Extend CPUID range to include new leaf") Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-6/+6
Pull KVM updates from Paolo Bonzini: "ARM: - support for SVE and Pointer Authentication in guests - PMU improvements POWER: - support for direct access to the POWER9 XIVE interrupt controller - memory and performance optimizations x86: - support for accessing memory not backed by struct page - fixes and refactoring Generic: - dirty page tracking improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits) kvm: fix compilation on aarch64 Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU" kvm: x86: Fix L1TF mitigation for shadow MMU KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing" KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete tests: kvm: Add tests for KVM_SET_NESTED_STATE KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID tests: kvm: Add tests to .gitignore KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one KVM: Fix the bitmap range to copy during clear dirty KVM: arm64: Fix ptrauth ID register masking logic KVM: x86: use direct accessors for RIP and RSP KVM: VMX: Use accessors for GPRs outside of dedicated caching logic KVM: x86: Omit caching logic for always-available GPRs kvm, x86: Properly check whether a pfn is an MMIO or not ...
2019-05-14Merge branch 'x86-mds-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MDS mitigations from Thomas Gleixner: "Microarchitectural Data Sampling (MDS) is a hardware vulnerability which allows unprivileged speculative access to data which is available in various CPU internal buffers. This new set of misfeatures has the following CVEs assigned: CVE-2018-12126 MSBDS Microarchitectural Store Buffer Data Sampling CVE-2018-12130 MFBDS Microarchitectural Fill Buffer Data Sampling CVE-2018-12127 MLPDS Microarchitectural Load Port Data Sampling CVE-2019-11091 MDSUM Microarchitectural Data Sampling Uncacheable Memory MDS attacks target microarchitectural buffers which speculatively forward data under certain conditions. Disclosure gadgets can expose this data via cache side channels. Contrary to other speculation based vulnerabilities the MDS vulnerability does not allow the attacker to control the memory target address. As a consequence the attacks are purely sampling based, but as demonstrated with the TLBleed attack samples can be postprocessed successfully. The mitigation is to flush the microarchitectural buffers on return to user space and before entering a VM. It's bolted on the VERW instruction and requires a microcode update. As some of the attacks exploit data structures shared between hyperthreads, full protection requires to disable hyperthreading. The kernel does not do that by default to avoid breaking unattended updates. The mitigation set comes with documentation for administrators and a deeper technical view" * 'x86-mds-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/speculation/mds: Fix documentation typo Documentation: Correct the possible MDS sysfs values x86/mds: Add MDSUM variant to the MDS documentation x86/speculation/mds: Add 'mitigations=' support for MDS x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off x86/speculation/mds: Fix comment x86/speculation/mds: Add SMT warning message x86/speculation: Move arch_smt_update() call to after mitigation decisions x86/speculation/mds: Add mds=full,nosmt cmdline option Documentation: Add MDS vulnerability documentation Documentation: Move L1TF to separate directory x86/speculation/mds: Add mitigation mode VMWERV x86/speculation/mds: Add sysfs reporting for MDS x86/speculation/mds: Add mitigation control for MDS x86/speculation/mds: Conditionally clear CPU buffers on idle entry x86/kvm/vmx: Add MDS protection when L1D Flush is not active x86/speculation/mds: Clear CPU buffers on exit to user x86/speculation/mds: Add mds_clear_cpu_buffers() x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests x86/speculation/mds: Add BUG_MSBDS_ONLY ...
2019-04-30KVM: x86: Omit caching logic for always-available GPRsSean Christopherson1-6/+6
Except for RSP and RIP, which are held in VMX's VMCS, GPRs are always treated "available and dirtly" on both VMX and SVM, i.e. are unconditionally loaded/saved immediately before/after VM-Enter/VM-Exit. Eliminating the unnecessary caching code reduces the size of KVM by a non-trivial amount, much of which comes from the most common code paths. E.g. on x86_64, kvm_emulate_cpuid() is reduced from 342 to 182 bytes and kvm_emulate_hypercall() from 1362 to 1143, with the total size of KVM dropping by ~1000 bytes. With CONFIG_RETPOLINE=y, the numbers are even more pronounced, e.g.: 353->182, 1418->1172 and well over 2000 bytes. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+1
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-06x86/kvm: Expose X86_FEATURE_MD_CLEAR to guestsAndi Kleen1-1/+2
X86_FEATURE_MD_CLEAR is a new CPUID bit which is set when microcode provides the mechanism to invoke a flush of various exploitable CPU buffers by invoking the VERW instruction. Hand it through to guests so they can adjust their mitigations. This also requires corresponding qemu changes, which are available separately. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Jon Masters <jcm@redhat.com> Tested-by: Jon Masters <jcm@redhat.com>
2019-02-22kvm: x86: Return LA57 feature based on hardware capabilityYu Zhang1-0/+4
Previously, 'commit 372fddf70904 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: x86: expose MOVDIR64B CPU feature into VM.Liu Jingqi1-1/+1
MOVDIR64B moves 64-bytes as direct-store with 64-bytes write atomicity. Direct store is implemented by using write combining (WC) for writing data directly into memory without caching the data. Availability of the MOVDIR64B instruction is indicated by the presence of the CPUID feature flag MOVDIR64B (CPUID.0x07.0x0:ECX[bit 28]). This patch exposes the movdir64b feature to the guest. The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Cc: Xu Tao <tao3.xu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: x86: expose MOVDIRI CPU feature into VM.Liu Jingqi1-1/+1
MOVDIRI moves doubleword or quadword from register to memory through direct store which is implemented by using write combining (WC) for writing data directly into memory without caching the data. Availability of the MOVDIRI instruction is indicated by the presence of the CPUID feature flag MOVDIRI(CPUID.0x07.0x0:ECX[bit 27]). This patch exposes the movdiri feature to the guest. The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Cc: Xu Tao <tao3.xu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21KVM: x86: Add CPUID support for new instruction WBNOINVDRobert Hoo1-1/+1
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21KVM: x86: Add Intel Processor Trace cpuid emulationChao Peng1-2/+20
Expose Intel Processor Trace to guest only when the PT works in Host-Guest mode. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21KVM: x86: Remove KF() macro placeholderSean Christopherson1-3/+0
Although well-intentioned, keeping the KF() definition as a hint for handling scattered CPUID features may be counter-productive. Simply redefining the bit position only works for directly manipulating the guest's CPUID leafs, e.g. it doesn't make guest_cpuid_has() magically work. Taking an alternative approach, e.g. ensuring the bit position is identical between the Linux-defined and hardware-defined features, may be a simpler and/or more effective method of exposing scattered features to the guest. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-12-14kvm: x86: Report STIBP on GET_SUPPORTED_CPUIDEduardo Habkost1-2/+2
Months ago, we have added code to allow direct access to MSR_IA32_SPEC_CTRL to the guest, which makes STIBP available to guests. This was implemented by commits d28b387fb74d ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL") and b2ac58f90540 ("KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL"). However, we never updated GET_SUPPORTED_CPUID to let userspace know that STIBP can be enabled in CPUID. Fix that by updating kvm_cpuid_8000_0008_ebx_x86_features and kvm_cpuid_7_0_edx_x86_features. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06KVM: X86: Implement "send IPI" hypercallWanpeng Li1-1/+2
Using hypercall to send IPIs by one vmexit instead of one by one for xAPIC/x2APIC physical mode and one vmexit per-cluster for x2APIC cluster mode. Intel guest can enter x2apic cluster mode when interrupt remmaping is enabled in qemu, however, latest AMD EPYC still just supports xapic mode which can get great improvement by Exit-less IPIs. This patchset lets a guest send multicast IPIs, with at most 128 destinations per hypercall in 64-bit mode and 64 vCPUs per hypercall in 32-bit mode. Hardware: Xeon Skylake 2.5GHz, 2 sockets, 40 cores, 80 threads, the VM is 80 vCPUs, IPI microbenchmark(https://lkml.org/lkml/2017/12/19/141): x2apic cluster mode, vanilla Dry-run: 0, 2392199 ns Self-IPI: 6907514, 15027589 ns Normal IPI: 223910476, 251301666 ns Broadcast IPI: 0, 9282161150 ns Broadcast lock: 0, 8812934104 ns x2apic cluster mode, pv-ipi Dry-run: 0, 2449341 ns Self-IPI: 6720360, 15028732 ns Normal IPI: 228643307, 255708477 ns Broadcast IPI: 0, 7572293590 ns => 22% performance boost Broadcast lock: 0, 8316124651 ns x2apic physical mode, vanilla Dry-run: 0, 3135933 ns Self-IPI: 8572670, 17901757 ns Normal IPI: 226444334, 255421709 ns Broadcast IPI: 0, 19845070887 ns Broadcast lock: 0, 19827383656 ns x2apic physical mode, pv-ipi Dry-run: 0, 2446381 ns Self-IPI: 6788217, 15021056 ns Normal IPI: 219454441, 249583458 ns Broadcast IPI: 0, 7806540019 ns => 154% performance boost Broadcast lock: 0, 9143618799 ns Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-1/+2
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook1-2/+3
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+2
Pull KVM updates from Paolo Bonzini: "Small update for KVM: ARM: - lazy context-switching of FPSIMD registers on arm64 - "split" regions for vGIC redistributor s390: - cleanups for nested - clock handling - crypto - storage keys - control register bits x86: - many bugfixes - implement more Hyper-V super powers - implement lapic_timer_advance_ns even when the LAPIC timer is emulated using the processor's VMX preemption timer. - two security-related bugfixes at the top of the branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits) kvm: fix typo in flag name kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system KVM: x86: introduce linear_{read,write}_system kvm: nVMX: Enforce cpl=0 for VMX instructions kvm: nVMX: Add support for "VMWRITE to any supported field" kvm: nVMX: Restrict VMX capability MSR changes KVM: VMX: Optimize tscdeadline timer latency KVM: docs: nVMX: Remove known limitations as they do not exist now KVM: docs: mmu: KVM support exposing SLAT to guests kvm: no need to check return value of debugfs_create functions kvm: Make VM ioctl do valloc for some archs kvm: Change return type to vm_fault_t KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008 kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation KVM: introduce kvm_make_vcpus_request_mask() API KVM: x86: hyperv: do rep check for each hypercall separately ...
2018-06-06x86/bugs: Add AMD's SPEC_CTRL MSR usageKonrad Rzeszutek Wilk1-2/+8
The AMD document outlining the SSBD handling 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf mentions that if CPUID 8000_0008.EBX[24] is set we should be using the SPEC_CTRL MSR (0x48) over the VIRT SPEC_CTRL MSR (0xC001_011f) for speculative store bypass disable. This in effect means we should clear the X86_FEATURE_VIRT_SSBD flag so that we would prefer the SPEC_CTRL MSR. See the document titled: 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf A copy of this document is available at https://bugzilla.kernel.org/show_bug.cgi?id=199889 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: andrew.cooper3@citrix.com Cc: Joerg Roedel <joro@8bytes.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20180601145921.9500-3-konrad.wilk@oracle.com
2018-06-06x86/bugs: Add AMD's variant of SSB_NOKonrad Rzeszutek Wilk1-1/+1
The AMD document outlining the SSBD handling 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf mentions that the CPUID 8000_0008.EBX[26] will mean that the speculative store bypass disable is no longer needed. A copy of this document is available at: https://bugzilla.kernel.org/show_bug.cgi?id=199889 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: andrew.cooper3@citrix.com Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180601145921.9500-2-konrad.wilk@oracle.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 06:30:07 +0000