| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
IBRS mitigation for spectre_v2 forces write to MSR_IA32_SPEC_CTRL at
every kernel entry/exit. On Enhanced IBRS parts setting
MSR_IA32_SPEC_CTRL[IBRS] only once at boot is sufficient. MSR writes at
every kernel entry/exit incur unnecessary performance loss.
When Enhanced IBRS feature is present, print a warning about this
unnecessary performance loss.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/2a5eaf54583c2bfe0edc4fea64006656256cca17.1657814857.git.pawan.kumar.gupta@linux.intel.com
|
|
Debugging missing return thunks is easier if we can see where they're
happening.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Ys66hwtFcGbYmoiZ@hirez.programming.kicks-ass.net/
|
|
Add support for SMN communication on family 17h model A0h and family 19h
models 60h-70h.
[ bp: Merge into a single patch. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220719195256.1516-1-mario.limonciello@amd.com
|
|
Instead of the magic numbers 1<<11 and 1<<12 use the constants
from msr-index.h. This makes it obvious where those bits
of MSR_IA32_MISC_ENABLE are consumed (and in fact that Linux
consumes them at all) to simple minds that grep for
MSR_IA32_MISC_ENABLE_.*_UNAVAIL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220719174714.2410374-1-pbonzini@redhat.com
|
|
When a CPU enters an idle state, a non-initialized AMX register state may
be the cause of preventing a deeper low-power state. Other extended
register states whether initialized or not do not impact the CPU idle
state.
The new helper can ensure the AMX state is initialized before the CPU is
idle, and it will be used by the intel idle driver.
Check the AMX_TILE feature bit before using XGETBV1 as a chain of
dependencies was established via cpuid_deps[]: AMX->XFD->XGETBV1.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20220608164748.11864-2-chang.seok.bae@intel.com
|
|
On AMD IBRS does not prevent Retbleed; as such use IBPB before a
firmware call to flush the branch history state.
And because in order to do an EFI call, the kernel maps a whole lot of
the kernel page table into the EFI page table, do an IBPB just in case
in order to prevent the scenario of poisoning the BTB and causing an EFI
call using the unprotected RET there.
[ bp: Massage. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220715194550.793957-1-cascardo@canonical.com
|
|
The decision of whether or not to trust RDRAND is controlled by the
"random.trust_cpu" boot time parameter or the CONFIG_RANDOM_TRUST_CPU
compile time default. The "nordrand" flag was added during the early
days of RDRAND, when there were worries that merely using its values
could compromise the RNG. However, these days, RDRAND values are not
used directly but always go through the RNG's hash function, making
"nordrand" no longer useful.
Rather, the correct switch is "random.trust_cpu", which not only handles
the relevant trust issue directly, but also is general to multiple CPU
types, not just x86.
However, x86 RDRAND does have a history of being occasionally
problematic. Prior, when the kernel would notice something strange, it'd
warn in dmesg and suggest enabling "nordrand". We can improve on that by
making the test a little bit better and then taking the step of
automatically disabling RDRAND if we detect it's problematic.
Also disable RDSEED if the RDRAND test fails.
Cc: x86@kernel.org
Cc: Theodore Ts'o <tytso@mit.edu>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Patch series "cpumask: Fix invalid uniprocessor assumptions", v4.
On uniprocessor builds, it is currently assumed that any cpumask will
contain the single CPU: cpu0. This assumption is used to provide
optimised implementations.
The current assumption also appears to be wrong, by ignoring the fact that
users can provide empty cpumasks. This can result in bugs as explained in
[1] - for_each_cpu() will run one iteration of the loop even when passed
an empty cpumask.
This series introduces some basic tests, and updates the optimisations for
uniprocessor builds.
The x86 patch was written after the kernel test robot [2] ran into a
failed build. I have tried to list the files potentially affected by the
changes to cpumask.h, in an attempt to find any other cases that fail on
!SMP. I've gone through some of the files manually, and ran a few cross
builds, but nothing else popped up. I (build) checked about half of the
potientally affected files, but I do not have the resources to do them
all. I hope we can fix other issues if/when they pop up later.
[1] https://lore.kernel.org/all/20220530082552.46113-1-sander@svanheule.net/
[2] https://lore.kernel.org/all/202206060858.wA0FOzRy-lkp@intel.com/
This patch (of 5):
The maps to keep track of shared caches between CPUs on SMP systems are
declared in asm/smp.h, among them specifically cpu_llc_shared_map. These
maps are externally defined in cpu/smpboot.c. The latter is only compiled
on CONFIG_SMP=y, which means the declared extern symbols from asm/smp.h do
not have a corresponding definition on uniprocessor builds.
The inline cpu_llc_shared_mask() function from asm/smp.h refers to the map
declaration mentioned above. This function is referenced in cacheinfo.c
inside for_each_cpu() loop macros, to provide cpumask for the loop. On
uniprocessor builds, the symbol for the cpu_llc_shared_map does not exist.
However, the current implementation of for_each_cpu() also (wrongly)
ignores the provided mask.
By sheer luck, the compiler thus optimises out this unused reference to
cpu_llc_shared_map, and the linker therefore does not require the
cpu_llc_shared_mask to actually exist on uniprocessor builds. Only on SMP
bulids does smpboot.o exist to provide the required symbols.
To no longer rely on compiler optimisations for successful uniprocessor
builds, move the definitions of cpu_llc_shared_map and cpu_l2c_shared_map
from smpboot.c to cacheinfo.c.
Link: https://lkml.kernel.org/r/cover.1656777646.git.sander@svanheule.net
Link: https://lkml.kernel.org/r/e8167ddb570f56744a3dc12c2149a660a324d969.1656777646.git.sander@svanheule.net
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Improve the check whether the kernel supports WP mappings so that it
can accomodate a XenPV guest due to how the latter is setting up the
PAT machinery
- Now that the retbleed nightmare is public, here's the first round of
fallout fixes:
* Fix a build failure on 32-bit due to missing include
* Remove an untraining point in espfix64 return path
* other small cleanups
* tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove apostrophe typo
um: Add missing apply_returns()
x86/entry: Remove UNTRAIN_RET from native_irq_return_ldt
x86/bugs: Mark retbleed_strings static
x86/pat: Fix x86_has_pat_wp()
x86/asm/32: Fix ANNOTATE_UNRET_SAFE use on 32-bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix more fallout from recent changes of the ACPI CPPC handling on AMD
platforms (Mario Limonciello)"
* tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
|
|
Remove a superfluous ' in the mitigation string.
Fixes: e8ec1b6e08a2 ("x86/bugs: Enable STIBP for JMP2RET")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
commit 278311e417be ("kexec, KEYS: Make use of platform keyring for
signature verify") adds platform keyring support on x86 kexec but not
arm64.
The code in bzImage64_verify_sig uses the keys on the
.builtin_trusted_keys, .machine, if configured and enabled,
.secondary_trusted_keys, also if configured, and .platform keyrings
to verify the signed kernel image as PE file.
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
tboot_force_iommu() is only called by the Intel IOMMU driver. Move the
helper into that driver. No functional change intended.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This symbol is not used outside of bugs.c, so mark it static.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220714072939.71162-1-jiapeng.chong@linux.alibaba.com
|
|
When commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all
and when CPPC_LIB is supported") was introduced, we found collateral
damage that a number of AMD systems that supported CPPC but
didn't advertise support in _OSC stopped having a functional
amd-pstate driver. The _OSC was only enforced on Intel systems at that
time.
This was fixed for the MSR based designs by commit 8b356e536e69f
("ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported")
but some shared memory based designs also support CPPC but haven't
advertised support in the _OSC. Add support for those designs as well by
hardcoding the list of systems.
Fixes: 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Fixes: 8b356e536e69f ("ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported")
Link: https://lore.kernel.org/all/3559249.JlDtxWtqDm@natalenko.name/
Cc: 5.18+ <stable@vger.kernel.org> # 5.18+
Reported-and-tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The build on x86_32 currently fails after commit
9bb2ec608a20 (objtool: Update Retpoline validation)
with:
arch/x86/kernel/../../x86/xen/xen-head.S:35: Error: no such instruction: `annotate_unret_safe'
ANNOTATE_UNRET_SAFE is defined in nospec-branch.h. And head_32.S is
missing this include. Fix this.
Fixes: 9bb2ec608a20 ("objtool: Update Retpoline validation")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/63e23f80-033f-f64e-7522-2816debbc367@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull lockdep fix for x86 retbleed from Borislav Petkov:
- Fix lockdep complaint for __static_call_fixup()
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/static_call: Serialize __static_call_fixup() properly
|
|
__static_call_fixup() invokes __static_call_transform() without holding
text_mutex, which causes lockdep to complain in text_poke_bp().
Adding the proper locking cures that, but as this is either used during
early boot or during module finalizing, it's not required to use
text_poke_bp(). Add an argument to __static_call_transform() which tells
it to use text_poke_early() for it.
Fixes: ee88d363d156 ("x86,static_call: Use alternative RET encoding")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 retbleed fixes from Borislav Petkov:
"Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the
now pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide"
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
x86/speculation: Disable RRSBA behavior
x86/kexec: Disable RET on kexec
x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
x86/bugs: Add Cannon lake to RETBleed affected CPU list
x86/retbleed: Add fine grained Kconfig knobs
x86/cpu/amd: Enumerate BTC_NO
x86/common: Stamp out the stepping madness
KVM: VMX: Prevent RSB underflow before vmenter
x86/speculation: Fill RSB on vmexit for IBRS
KVM: VMX: Fix IBRS handling after vmexit
KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
KVM: VMX: Convert launched argument to flags
KVM: VMX: Flatten __vmx_vcpu_run()
objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
x86/speculation: Remove x86_spec_ctrl_mask
x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
x86/speculation: Fix SPEC_CTRL write on SMT state change
x86/speculation: Fix firmware entry SPEC_CTRL handling
x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
...
|
|
Currently, the only way x86 can get an early boot RNG seed is via EFI,
which is generally always used now for physical machines, but is very
rarely used in VMs, especially VMs that are optimized for starting
"instantaneously", such as Firecracker's MicroVM. For tiny fast booting
VMs, EFI is not something you generally need or want.
Rather, the image loader or firmware should be able to pass a single
random seed, exactly as device tree platforms do with the "rng-seed"
property. Additionally, this is something that bootloaders can append,
with their own seed file management, which is something every other
major OS ecosystem has that Linux does not (yet).
Add SETUP_RNG_SEED, similar to the other eight setup_data entries that
are parsed at boot. It also takes care to zero out the seed immediately
after using, in order to retain forward secrecy. This all takes about 7
trivial lines of code.
Then, on kexec_file_load(), a new fresh seed is generated and passed to
the next kernel, just as is done on device tree architectures when
using kexec. And, importantly, I've tested that QEMU is able to properly
pass SETUP_RNG_SEED as well, making this work for every step of the way.
This code too is pretty straight forward.
Together these measures ensure that VMs and nested kexec()'d kernels
always receive a proper boot time RNG seed at the earliest possible
stage from their parents:
- Host [already has strongly initialized RNG]
- QEMU [passes fresh seed in SETUP_RNG_SEED field]
- Linux [uses parent's seed and gathers entropy of its own]
- kexec [passes this in SETUP_RNG_SEED field]
- Linux [uses parent's seed and gathers entropy of its own]
- kexec [passes this in SETUP_RNG_SEED field]
- Linux [uses parent's seed and gathers entropy of its own]
- kexec [passes this in SETUP_RNG_SEED field]
- ...
I've verified in several scenarios that this works quite well from a
host kernel to QEMU and down inwards, mixing and matching loaders, with
every layer providing a seed to the next.
[ bp: Massage commit message. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/r/20220630113300.1892799-1-Jason@zx2c4.com
|
|
Merge rc6 to pick up dependent changes to the bootparam UAPI header.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Commit 3ad38ceb2769 ("x86/mm: Remove CONFIG_DEBUG_NX_TEST")
removed arch/x86/kernel/test_nx.c
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220711041247.119357-1-masahiroy@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prepare for and clear .brk early in order to address XenPV guests
failures where the hypervisor verifies page tables and uninitialized
data in that range leads to bogus failures in those checks
- Add any potential setup_data entries supplied at boot to the identity
pagetable mappings to prevent kexec kernel boot failures. Usually,
this is not a problem for the normal kernel as those mappings are
part of the initially mapped 2M pages but if kexec gets to allocate
the second kernel somewhere else, those setup_data entries need to be
mapped there too.
- Fix objtool not to discard text references from the __tracepoints
section so that ENDBR validation still works
- Correct the setup_data types limit as it is user-visible, before 5.19
releases
* tag 'x86_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix the setup data types max limit
x86/ibt, objtool: Don't discard text references from tracepoint section
x86/compressed/64: Add identity mappings for setup_data entries
x86: Fix .brk attribute in linker script
x86: Clear .brk area at early boot
x86/xen: Use clear_bss() for Xen PV guests
|
|
Some Intel processors may use alternate predictors for RETs on
RSB-underflow. This condition may be vulnerable to Branch History
Injection (BHI) and intramode-BTI.
Kernel earlier added spectre_v2 mitigation modes (eIBRS+Retpolines,
eIBRS+LFENCE, Retpolines) which protect indirect CALLs and JMPs against
such attacks. However, on RSB-underflow, RET target prediction may
fallback to alternate predictors. As a result, RET's predicted target
may get influenced by branch history.
A new MSR_IA32_SPEC_CTRL bit (RRSBA_DIS_S) controls this fallback
behavior when in kernel mode. When set, RETs will not take predictions
from alternate predictors, hence mitigating RETs as well. Support for
this is enumerated by CPUID.7.2.EDX[RRSBA_CTRL] (bit2).
For spectre v2 mitigation, when a user selects a mitigation that
protects indirect CALLs and JMPs against BHI and intramode-BTI, set
RRSBA_DIS_S also to protect RETs for RSB-underflow case.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
All the invocations unroll to __x86_return_thunk and this file
must be PIC independent.
This fixes kexec on 64-bit AMD boxes.
[ bp: Fix 32-bit build. ]
Reported-by: Edward Tran <edward.tran@oracle.com>
Reported-by: Awais Tanveer <awais.tanveer@oracle.com>
Suggested-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Storing the 'page_index' value in the sgx_backing struct is
dead code and no longer needed.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220708162124.8442-1-kristen@linux.intel.com
|
|
There are some VM configurations which have Skylake model but do not
support IBPB. In those cases, when using retbleed=ibpb, userspace is going
to be killed and kernel is going to panic.
If the CPU does not support IBPB, warn and proceed with the auto option. Also,
do not fallback to IBPB on AMD/Hygon systems if it is not supported.
Fixes: 3ebc17006888 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The page reclaimer ensures availability of EPC pages across all
enclaves. In support of this it runs independently from the
individual enclaves in order to take locks from the different
enclaves as it writes pages to swap.
When needing to load a page from swap an EPC page needs to be
available for its contents to be loaded into. Loading an existing
enclave page from swap does not reclaim EPC pages directly if
none are available, instead the reclaimer is woken when the
available EPC pages are found to be below a watermark.
When iterating over a large number of pages in an oversubscribed
environment there is a race between the reclaimer woken up and
EPC pages reclaimed fast enough for the page operations to proceed.
Ensure there are EPC pages available before attempting to load
a page that may potentially be pulled from swap into an available
EPC page.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/a0d8f037c4a075d56bf79f432438412985f7ff7a.1652137848.git.reinette.chatre@intel.com
|
|
The SGX2 page removal flow was introduced in previous patch and is
as follows:
1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
using the ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES introduced in
previous patch.
2) Approve the page removal by running ENCLU[EACCEPT] from within
the enclave.
3) Initiate actual page removal using the ioctl()
SGX_IOC_ENCLAVE_REMOVE_PAGES introduced here.
Support the final step of the SGX2 page removal flow with ioctl()
SGX_IOC_ENCLAVE_REMOVE_PAGES. With this ioctl() the user specifies
a page range that should be removed. All pages in the provided
range should have the SGX_PAGE_TYPE_TRIM page type and the request
will fail with EPERM (Operation not permitted) if a page that does
not have the correct type is encountered. Page removal can fail
on any page within the provided range. Support partial success by
returning the number of pages that were successfully removed.
Since actual page removal will succeed even if ENCLU[EACCEPT] was not
run from within the enclave the ENCLU[EMODPR] instruction with RWX
permissions is used as a no-op mechanism to ensure ENCLU[EACCEPT] was
successfully run from within the enclave before the enclave page is
removed.
If the user omits running SGX_IOC_ENCLAVE_REMOVE_PAGES the pages will
still be removed when the enclave is unloaded.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/b75ee93e96774e38bb44a24b8e9bbfb67b08b51b.1652137848.git.reinette.chatre@intel.com
|
|
Every enclave contains one or more Thread Control Structures (TCS). The
TCS contains meta-data used by the hardware to save and restore thread
specific information when entering/exiting the enclave. With SGX1 an
enclave needs to be created with enough TCSs to support the largest
number of threads expecting to use the enclave and enough enclave pages
to meet all its anticipated memory demands. In SGX1 all pages remain in
the enclave until the enclave is unloaded.
SGX2 introduces a new function, ENCLS[EMODT], that is used to change
the type of an enclave page from a regular (SGX_PAGE_TYPE_REG) enclave
page to a TCS (SGX_PAGE_TYPE_TCS) page or change the type from a
regular (SGX_PAGE_TYPE_REG) or TCS (SGX_PAGE_TYPE_TCS)
page to a trimmed (SGX_PAGE_TYPE_TRIM) page (setting it up for later
removal).
With the existing support of dynamically adding regular enclave pages
to an initialized enclave and changing the page type to TCS it is
possible to dynamically increase the number of threads supported by an
enclave.
Changing the enclave page type to SGX_PAGE_TYPE_TRIM is the first step
of dynamically removing pages from an initialized enclave. The complete
page removal flow is:
1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
using the SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl() introduced here.
2) Approve the page removal by running ENCLU[EACCEPT] from within
the enclave.
3) Initiate actual page removal using the ioctl() introduced in the
following patch.
Add ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES to support changing SGX
enclave page types within an initialized enclave. With
SGX_IOC_ENCLAVE_MODIFY_TYPES the user specifies a page range and the
enclave page type to be applied to all pages in the provided range.
The ioctl() itself can return an error code based on failures
encountered by the kernel. It is also possible for SGX specific
failures to be encountered. Add a result output parameter to
communicate the SGX return code. It is possible for the enclave page
type change request to fail on any page within the provided range.
Support partial success by returning the number of pages that were
successfully changed.
After the page type is changed the page continues to be accessible
from the kernel perspective with page table entries and internal
state. The page may be moved to swap. Any access until ENCLU[EACCEPT]
will encounter a page fault with SGX flag set in error code.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Link: https://lkml.kernel.org/r/babe39318c5bf16fc65fbfb38896cdee72161575.1652137848.git.reinette.chatre@intel.com
|
|
Before an enclave is initialized the enclave's memory range is unknown.
The enclave's memory range is learned at the time it is created via the
SGX_IOC_ENCLAVE_CREATE ioctl() where the provided memory range is
obtained from an earlier mmap() of /dev/sgx_enclave. After an enclave
is initialized its memory can be mapped into user space (mmap()) from
where it can be entered at its defined entry points.
With the enclave's memory range known after it is initialized there is
no reason why it should be possible to map memory outside this range.
Lock down access to the initialized enclave's memory range by denying
any attempt to map memory outside its memory range.
Locking down the memory range also makes adding pages to an initialized
enclave more efficient. Pages are added to an initialized enclave by
accessing memory that belongs to the enclave's memory range but not yet
backed by an enclave page. If it is possible for user space to map
memory that does not form part of the enclave then an access to this
memory would eventually fail. Failures range from a prompt general
protection fault if the access was an ENCLU[EACCEPT] from within the
enclave, or a page fault via the vDSO if it was another access from
within the enclave, or a SIGBUS (also resulting from a page fault) if
the access was from outside the enclave.
Disallowing invalid memory to be mapped in the first place avoids
preventable failures.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/6391460d75ae79cea2e81eef0f6ffc03c6e9cfe7.1652137848.git.reinette.chatre@intel.com
|
|
With SGX1 an enclave needs to be created with its maximum memory demands
allocated. Pages cannot be added to an enclave after it is initialized.
SGX2 introduces a new function, ENCLS[EAUG], that can be used to add
pages to an initialized enclave. With SGX2 the enclave still needs to
set aside address space for its maximum memory demands during enclave
creation, but all pages need not be added before enclave initialization.
Pages can be added during enclave runtime.
Add support for dynamically adding pages to an initialized enclave,
architecturally limited to RW permission at creation but allowed to
obtain RWX permissions after trusted enclave runs EMODPE. Add pages
via the page fault handler at the time an enclave address without a
backing enclave page is accessed, potentially directly reclaiming
pages if no free pages are available.
The enclave is still required to run ENCLU[EACCEPT] on the page before
it can be used. A useful flow is for the enclave to run ENCLU[EACCEPT]
on an uninitialized address. This will trigger the page fault handler
that will add the enclave page and return execution to the enclave to
repeat the ENCLU[EACCEPT] instruction, this time successful.
If the enclave accesses an uninitialized address in another way, for
example by expanding the enclave stack to a page that has not yet been
added, then the page fault handler would add the page on the first
write but upon returning to the enclave the instruction that triggered
the page fault would be repeated and since ENCLU[EACCEPT] was not run
yet it would trigger a second page fault, this time with the SGX flag
set in the page fault error code. This can only be recovered by entering
the enclave again and directly running the ENCLU[EACCEPT] instruction on
the now initialized address.
Accessing an uninitialized address from outside the enclave also
triggers this flow but the page will remain inaccessible (access will
result in #PF) until accepted from within the enclave via
ENCLU[EACCEPT].
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Link: https://lkml.kernel.org/r/a254a58eabea053803277449b24b6e4963a3883b.1652137848.git.reinette.chatre@intel.com
|
|
In the initial (SGX1) version of SGX, pages in an enclave need to be
created with permissions that support all usages of the pages, from the
time the enclave is initialized until it is unloaded. For example,
pages used by a JIT compiler or when code needs to otherwise be
relocated need to always have RWX permissions.
SGX2 includes a new function ENCLS[EMODPR] that is run from the kernel
and can be used to restrict the EPCM permissions of regular enclave
pages within an initialized enclave.
Introduce ioctl() SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS to support
restricting EPCM permissions. With this ioctl() the user specifies
a page range and the EPCM permissions to be applied to all pages in
the provided range. ENCLS[EMODPR] is run to restrict the EPCM
permissions followed by the ENCLS[ETRACK] flow that will ensure
no cached linear-to-physical address mappings to the changed
pages remain.
It is possible for the permission change request to fail on any
page within the provided range, either with an error encountered
by the kernel or by the SGX hardware while running
ENCLS[EMODPR]. To support partial success the ioctl() returns an
error code based on failures encountered by the kernel as well
as two result output parameters: one for the number of pages
that were successfully changed and one for the SGX return code.
The page table entry permissions are not impacted by the EPCM
permission changes. VMAs and PTEs will continue to allow the
maximum vetted permissions determined at the time the pages
are added to the enclave. The SGX error code in a page fault
will indicate if it was an EPCM permission check that prevented
an access attempt.
No checking is done to ensure that the permissions are actually
being restricted. This is because the enclave may have relaxed
the EPCM permissions from within the enclave without the kernel
knowing. An attempt to relax permissions using this call will
be ignored by the hardware.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Link: https://lkml.kernel.org/r/082cee986f3c1a2f4fdbf49501d7a8c5a98446f8.1652137848.git.reinette.chatre@intel.com
|
|
struct sgx_encl should be protected with the mutex
sgx_encl->lock. One exception is sgx_encl->page_cnt that
is incremented (in sgx_encl_grow()) when an enclave page
is added to the enclave. The reason the mutex is not held
is to allow the reclaimer to be called directly if there are
no EPC pages (in support of a new VA page) available at the time.
Incrementing sgx_encl->page_cnt without sgc_encl->lock held
is currently (before SGX2) safe from concurrent updates because
all paths in which sgx_encl_grow() is called occur before
enclave initialization and are protected with an atomic
operation on SGX_ENCL_IOCTL.
SGX2 includes support for dynamically adding pages after
enclave initialization where the protection of SGX_ENCL_IOCTL
is not available.
Make direct reclaim of EPC pages optional when new VA pages
are added to the enclave. Essentially the existing "reclaim"
flag used when regular EPC pages are added to an enclave
becomes available to the caller when used to allocate VA pages
instead of always being "true".
When adding pages without invoking the reclaimer it is possible
to do so with sgx_encl->lock held, gaining its protection against
concurrent updates to sgx_encl->page_cnt after enclave
initialization.
No functional change.
Reported-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/42c5934c229982ee67982bb97c6ab34bde758620.1652137848.git.reinette.chatre@intel.com
|
|
Move sgx_encl_page_alloc() to encl.c and export it so that it can be
used in the implementation for support of adding pages to initialized
enclaves, which requires to allocate new enclave pages.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/57ae71b4ea17998467670232e12d6617b95c6811.1652137848.git.reinette.chatre@intel.com
|
|
In order to use sgx_encl_{grow,shrink}() in the page augmentation code
located in encl.c, export these functions.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d51730acf54b6565710b2261b3099517b38c2ec4.1652137848.git.reinette.chatre@intel.com
|
|
SGX2 functions are not allowed on all page types. For example,
ENCLS[EMODPR] is only allowed on regular SGX enclave pages and
ENCLS[EMODPT] is only allowed on TCS and regular pages. If these
functions are attempted on another type of page the hardware would
trigger a fault.
Keep a record of the SGX page type so that there is more
certainty whether an SGX2 instruction can succeed and faults
can be treated as real failures.
The page type is a property of struct sgx_encl_page
and thus does not cover the VA page type. VA pages are maintained
in separate structures and their type can be determined in
a different way. The SGX2 instructions needing the page type do not
operate on VA pages and this is thus not a scenario needing to
be covered at this time.
struct sgx_encl_page hosting this information is maintained for each
enclave page so the space consumed by the struct is important.
The existing sgx_encl_page->vm_max_prot_bits is already unsigned long
while only using three bits. Transition to a bitfield for the two
members to support the additional information without increasing
the space consumed by the struct.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/a0a6939eefe7ba26514f6c49723521cde372de64.1652137848.git.reinette.chatre@intel.com
|
|
User provided offset and length is validated when parsing the parameters
of the SGX_IOC_ENCLAVE_ADD_PAGES ioctl(). Extract this validation
(with consistent use of IS_ALIGNED) into a utility that can be used
by the SGX2 ioctl()s that will also provide these values.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/767147bc100047abed47fe27c592901adfbb93a2.1652137848.git.reinette.chatre@intel.com
|
|
The ETRACK function followed by an IPI to all CPUs within an enclave
is a common pattern with more frequent use in support of SGX2.
Make the (empty) IPI callback function available internally in
preparation for usage by SGX2.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/1179ed4a9c3c1c2abf49d51bfcf2c30b493181cc.1652137848.git.reinette.chatre@intel.com
|
|
The SGX reclaimer removes page table entries pointing to pages that are
moved to swap.
SGX2 enables changes to pages belonging to an initialized enclave, thus
enclave pages may have their permission or type changed while the page
is being accessed by an enclave. Supporting SGX2 requires page table
entries to be removed so that any cached mappings to changed pages
are removed. For example, with the ability to change enclave page types
a regular enclave page may be changed to a Thread Control Structure
(TCS) page that may not be accessed by an enclave.
Factor out the code removing page table entries to a separate function
sgx_zap_enclave_ptes(), fixing accuracy of comments in the process,
and make it available to the upcoming SGX2 code.
Place sgx_zap_enclave_ptes() with the rest of the enclave code in
encl.c interacting with the page table since this code is no longer
unique to the reclaimer.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/b010cdf01d7ce55dd0f00e883b7ccbd9db57160a.1652137848.git.reinette.chatre@intel.com
|
|
sgx_encl_ewb_cpumask() is no longer unique to the reclaimer where it
is used during the EWB ENCLS leaf function when EPC pages are written
out to main memory and sgx_encl_ewb_cpumask() is used to learn which
CPUs might have executed the enclave to ensure that TLBs are cleared.
Upcoming SGX2 enabling will use sgx_encl_ewb_cpumask() during the
EMODPR and EMODT ENCLS leaf functions that make changes to enclave
pages. The function is needed for the same reason it is used now: to
learn which CPUs might have executed the enclave to ensure that TLBs
no longer point to the changed pages.
Rename sgx_encl_ewb_cpumask() to sgx_encl_cpumask() to reflect the
broader usage.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d4d08c449450a13d8dd3bb6c2b1af03895586d4f.1652137848.git.reinette.chatre@intel.com
|
|
Using sgx_encl_ewb_cpumask() to learn which CPUs might have executed
an enclave is useful to ensure that TLBs are cleared when changes are
made to enclave pages.
sgx_encl_ewb_cpumask() is used within the reclaimer when an enclave
page is evicted. The upcoming SGX2 support enables changes to be
made to enclave pages and will require TLBs to not refer to the
changed pages and thus will be needing sgx_encl_ewb_cpumask().
Relocate sgx_encl_ewb_cpumask() to be with the rest of the enclave
code in encl.c now that it is no longer unique to the reclaimer.
Take care to ensure that any future usage maintains the
current context requirement that ETRACK has been called first.
Expand the existing comments to highlight this while moving them
to a more prominent location before the function.
No functional change.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/05b60747fd45130cf9fc6edb1c373a69a18a22c5.1652137848.git.reinette.chatre@intel.com
|
|
sgx_encl_load_page() is used to find and load an enclave page into
enclave (EPC) memory, potentially loading it from the backing storage.
Both usages of sgx_encl_load_page() are during an access to the
enclave page from a VMA and thus the permissions of the VMA are
considered before the enclave page is loaded.
SGX2 functions operating on enclave pages belonging to an initialized
enclave requiring the page to be in EPC. It is thus required to
support loading enclave pages into the EPC independent from a VMA.
Split the current sgx_encl_load_page() to support the two usages:
A new call, sgx_encl_load_page_in_vma(), behaves exactly like the
current sgx_encl_load_page() that takes VMA permissions into account,
while sgx_encl_load_page() just loads an enclave page into EPC.
VMA, PTE, and EPCM permissions continue to dictate whether
the pages can be accessed from within an enclave.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d4393513c1f18987c14a490bcf133bfb71a5dc43.1652137848.git.reinette.chatre@intel.com
|
|
Add a wrapper for the EAUG ENCLS leaf function used to
add a page to an initialized enclave.
EAUG:
1) Stores all properties of the new enclave page in the SGX
hardware's Enclave Page Cache Map (EPCM).
2) Sets the PENDING bit in the EPCM entry of the enclave page.
This bit is cleared by the enclave by invoking ENCLU leaf
function EACCEPT or EACCEPTCOPY.
Access from within the enclave to the new enclave page is not
possible until the PENDING bit is cleared.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/97a46754fe4764e908651df63694fb760f783d6e.1652137848.git.reinette.chatre@intel.com
|
|
Add a wrapper for the EMODT ENCLS leaf function used to
change the type of an enclave page as maintained in the
SGX hardware's Enclave Page Cache Map (EPCM).
EMODT:
1) Updates the EPCM page type of the enclave page.
2) Sets the MODIFIED bit in the EPCM entry of the enclave page.
This bit is reset by the enclave by invoking ENCLU leaf
function EACCEPT or EACCEPTCOPY.
Access from within the enclave to the enclave page is not possible
while the MODIFIED bit is set.
After changing the enclave page type by issuing EMODT the kernel
needs to collaborate with the hardware to ensure that no logical
processor continues to hold a reference to the changed page. This
is required to ensure no required security checks are circumvented
and is required for the enclave's EACCEPT/EACCEPTCOPY to succeed.
Ensuring that no references to the changed page remain is
accomplished with the ETRACK flow.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/dba63a8c0db1d510b940beee1ba2a8207efeb1f1.1652137848.git.reinette.chatre@intel.com
|
|
Add a wrapper for the EMODPR ENCLS leaf function used to
restrict enclave page permissions as maintained in the
SGX hardware's Enclave Page Cache Map (EPCM).
EMODPR:
1) Updates the EPCM permissions of an enclave page by treating
the new permissions as a mask. Supplying a value that attempts
to relax EPCM permissions has no effect on EPCM permissions
(PR bit, see below, is changed).
2) Sets the PR bit in the EPCM entry of the enclave page to
indicate that permission restriction is in progress. The bit
is reset by the enclave by invoking ENCLU leaf function
EACCEPT or EACCEPTCOPY.
The enclave may access the page throughout the entire process
if conforming to the EPCM permissions for the enclave page.
After performing the permission restriction by issuing EMODPR
the kernel needs to collaborate with the hardware to ensure that
all logical processors sees the new restricted permissions. This
is required for the enclave's EACCEPT/EACCEPTCOPY to succeed and
is accomplished with the ETRACK flow.
Expand enum sgx_return_code with the possible EMODPR return
values.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d15e7a769e13e4ca671fa2d0a0d3e3aec5aedbd4.1652137848.git.reinette.chatre@intel.com
|
|
The SGX ENCLS instruction uses EAX to specify an SGX function and
may require additional registers, depending on the SGX function.
ENCLS invokes the specified privileged SGX function for managing
and debugging enclaves. Macros are used to wrap the ENCLS
functionality and several wrappers are used to wrap the macros to
make the different SGX functions accessible in the code.
The wrappers of the supported SGX functions are cryptic. Add short
descriptions of each as a comment.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/5e78a1126711cbd692d5b8132e0683873398f69e.1652137848.git.reinette.chatre@intel.com
|
|
Cannon lake is also affected by RETBleed, add it to the list.
Fixes: 6ad0ad2bf8a6 ("x86/bugs: Report Intel retbleed vulnerability")
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
