summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
AgeCommit message (Collapse)AuthorFilesLines
2019-07-25x86/speculation/mds: Apply more accurate check on hypervisor platformZhenzhong Duan1-1/+1
X86_HYPER_NATIVE isn't accurate for checking if running on native platform, e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled. Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's running on native platform is more accurate. This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is unsupported, e.g. VMware, but there is nothing which can be done about this scenario. Fixes: 8a4b06d391b0 ("x86/speculation/mds: Add sysfs reporting for MDS") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.com
2019-07-25x86/hpet: Undo the early counter is counting checkThomas Gleixner1-4/+8
Rui reported that on a Pentium D machine which has HPET forced enabled because it is not advertised by ACPI, the early counter is counting check leads to a silent boot hang. The reason is that the ordering of checking the counter first and then reconfiguring the HPET fails to work on that machine. As the HPET is not advertised and presumably not initialized by the BIOS the early enable and the following reconfiguration seems to bring it into a broken state. Adding clocksource=jiffies to the command line results in the following clocksource watchdog warning: clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large: clocksource: 'hpet' wd_now: 33 wd_last: 33 mask: ffffffff That clearly shows that the HPET is not counting after it got reconfigured and reenabled. If the counter is not working then the HPET timer is not expiring either, which explains the boot hang. Move the counter is counting check after the full configuration again to unbreak these systems. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Fixes: 3222daf970f3 ("x86/hpet: Separate counter check out of clocksource register code") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907250810530.1791@nanos.tec.linutronix.de
2019-07-22x86/irq/64: Update stale commentCao jin1-4/+4
Commit e6401c130931 ("x86/irq/64: Split the IRQ stack into its own pages") missed to update one piece of comment as it did to its peer in Xen, which will confuse people who still need to read comment. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190719081635.26528-1-caoj.fnst@cn.fujitsu.com
2019-07-22x86/sysfb_efi: Add quirks for some devices with swapped width and heightHans de Goede1-0/+46
Some Lenovo 2-in-1s with a detachable keyboard have a portrait screen but advertise a landscape resolution and pitch, resulting in a messed up display if the kernel tries to show anything on the efifb (because of the wrong pitch). Fix this by adding a new DMI match table for devices which need to have their width and height swapped. At first it was tried to use the existing table for overriding some of the efifb parameters, but some of the affected devices have variants with different LCD resolutions which will not work with hardcoded override values. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1730783 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190721152418.11644-1-hdegoede@redhat.com
2019-07-22x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()Eiichi Tsukata1-1/+1
When arch_stack_walk_user() is called from atomic contexts, access_ok() can trigger the following warning if compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y. Reproducer: // CONFIG_DEBUG_ATOMIC_SLEEP=y # cd /sys/kernel/debug/tracing # echo 1 > options/userstacktrace # echo 1 > events/irq/irq_handler_entry/enable WARNING: CPU: 0 PID: 2649 at arch/x86/kernel/stacktrace.c:103 arch_stack_walk_user+0x6e/0xf6 CPU: 0 PID: 2649 Comm: bash Not tainted 5.3.0-rc1+ #99 RIP: 0010:arch_stack_walk_user+0x6e/0xf6 Call Trace: <IRQ> stack_trace_save_user+0x10a/0x16d trace_buffer_unlock_commit_regs+0x185/0x240 trace_event_buffer_commit+0xec/0x330 trace_event_raw_event_irq_handler_entry+0x159/0x1e0 __handle_irq_event_percpu+0x22d/0x440 handle_irq_event_percpu+0x70/0x100 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12f/0x3f0 handle_irq+0x34/0x40 do_IRQ+0xa6/0x1f0 common_interrupt+0xf/0xf </IRQ> Fix it by calling __range_not_ok() directly instead of access_ok() as copy_from_user_nmi() does. This is fine here because the actual copy is inside a pagefault disabled region. Reported-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190722083216.16192-2-devel@etsukata.com
2019-07-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds10-35/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
2019-07-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ...
2019-07-19Merge tag 'for-linus-5.3a-rc1-tag' of ↵Linus Torvalds4-12/+15
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Fixes and features: - A series to introduce a common command line parameter for disabling paravirtual extensions when running as a guest in virtualized environment - A fix for int3 handling in Xen pv guests - Removal of the Xen-specific tmem driver as support of tmem in Xen has been dropped (and it was experimental only) - A security fix for running as Xen dom0 (XSA-300) - A fix for IRQ handling when offlining cpus in Xen guests - Some small cleanups" * tag 'for-linus-5.3a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: let alloc_xenballooned_pages() fail if not enough memory free xen/pv: Fix a boot up hang revealed by int3 self test x86/xen: Add "nopv" support for HVM guest x86/paravirt: Remove const mark from x86_hyper_xen_hvm variable xen: Map "xen_nopv" parameter to "nopv" and mark it obsolete x86: Add "nopv" parameter to disable PV extensions x86/xen: Mark xen_hvm_need_lapic() and xen_x2apic_para_available() as __init xen: remove tmem driver Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized" xen/events: fix binding user event channels to cpus
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-4/+2
Merge yet more updates from Andrew Morton: "The rest of MM and a kernel-wide procfs cleanup. Summary of the more significant patches: - Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. David Hildenbrand. Some spring-cleaning of the memory hotplug code, notably in drivers/base/memory.c - "mm: thp: fix false negative of shmem vma's THP eligibility". Yang Shi. Fix /proc/pid/smaps output for THP pages used in shmem. - "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit. Bugfix and speedup for kernel/resource.c - Patch series "mm: Further memory block device cleanups", David Hildenbrand. More spring-cleaning of the memory hotplug code. - Patch series "mm: Sub-section memory hotplug support". Dan Williams. Generalise the memory hotplug code so that pmem can use it more completely. Then remove the hacks from the libnvdimm code which were there to work around the memory-hotplug code's constraints. - "proc/sysctl: add shared variables for range check", Matteo Croce. We have about 250 instances of int zero; ... .extra1 = &zero, in the tree. This is a tree-wide sweep to make all those private "zero"s and "one"s use global variables. Alas, it isn't practical to make those two global integers const" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) proc/sysctl: add shared variables for range check mm: migrate: remove unused mode argument mm/sparsemem: cleanup 'section number' data types libnvdimm/pfn: stop padding pmem namespaces to section alignment libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields mm/devm_memremap_pages: enable sub-section remap mm: document ZONE_DEVICE memory-model implications mm/sparsemem: support sub-section hotplug mm/sparsemem: prepare for sub-section ranges mm: kill is_dev_zone() helper mm/hotplug: kill is_dev_zone() usage in __remove_pages() mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap() mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal mm/sparsemem: add helpers track active portions of a section at boot mm/sparsemem: introduce a SECTION_IS_EARLY flag mm/sparsemem: introduce struct mem_section_usage drivers/base/memory.c: get rid of find_memory_block_hinted() mm/memory_hotplug: move and simplify walk_memory_blocks() mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns mm: make register_mem_sect_under_node() static ...
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce1-4/+2
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18x86/head/64: Annotate start_cpu0() as non-callableJosh Poimboeuf1-2/+2
After an objtool improvement, it complains about the fact that start_cpu0() jumps to code which has an LRET instruction. arch/x86/kernel/head_64.o: warning: objtool: .head.text+0xe4: unsupported instruction in callable function Technically, start_cpu0() is callable, but it acts nothing like a callable function. Prevent objtool from treating it like one by removing its ELF function annotation. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6b1b4505fcb90571a55fa1b52d71fb458ca24454.1563413318.git.jpoimboe@redhat.com
2019-07-18x86/paravirt: Fix callee-saved function ELF sizesJosh Poimboeuf1-0/+1
The __raw_callee_save_*() functions have an ELF symbol size of zero, which confuses objtool and other tools. Fixes a bunch of warnings like the following: arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
2019-07-18Merge tag 'trace-v5.3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The main changes in this release include: - Add user space specific memory reading for kprobes - Allow kprobes to be executed earlier in boot The rest are mostly just various clean ups and small fixes" * tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Make trace_get_fields() global tracing: Let filter_assign_type() detect FILTER_PTR_STRING tracing: Pass type into tracing_generic_entry_update() ftrace/selftest: Test if set_event/ftrace_pid exists before writing ftrace/selftests: Return the skip code when tracing directory not configured in kernel tracing/kprobe: Check registered state using kprobe tracing/probe: Add trace_event_call accesses APIs tracing/probe: Add probe event name and group name accesses APIs tracing/probe: Add trace flag access APIs for trace_probe tracing/probe: Add trace_event_file access APIs for trace_probe tracing/probe: Add trace_event_call register API for trace_probe tracing/probe: Add trace_probe init and free functions tracing/uprobe: Set print format when parsing command tracing/kprobe: Set print format right after parsed command kprobes: Fix to init kprobes in subsys_initcall tracepoint: Use struct_size() in kmalloc() ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS ftrace: Enable trampoline when rec count returns back to one tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline tracing: Make a separate config for trace event self tests ...
2019-07-17x86/mm, tracing: Fix CR2 corruptionPeter Zijlstra2-9/+5
Despite the current efforts to read CR2 before tracing happens there still exist a number of possible holes: idtentry page_fault do_page_fault has_error_code=1 call error_entry TRACE_IRQS_OFF call trace_hardirqs_off* #PF // modifies CR2 CALL_enter_from_user_mode __context_tracking_exit() trace_user_exit(0) #PF // modifies CR2 call do_page_fault address = read_cr2(); /* whoopsie */ And similar for i386. Fix it by pulling the CR2 read into the entry code, before any of that stuff gets a chance to run and ruin things. Reported-by: He Zhe <zhe.he@windriver.com> Reported-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: rostedt@goodmis.org Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: jgross@suse.com Cc: joel@joelfernandes.org Link: https://lkml.kernel.org/r/20190711114336.116812491@infradead.org Debugged-by: Steven Rostedt <rostedt@goodmis.org>
2019-07-17x86/paravirt: Make read_cr2() CALLEE_SAVEPeter Zijlstra3-4/+3
The one paravirt read_cr2() implementation (Xen) is actually quite trivial and doesn't need to clobber anything other than the return register. Making read_cr2() CALLEE_SAVE avoids all the PUSH/POP nonsense and allows more convenient use from assembly. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: bp@alien8.de Cc: rostedt@goodmis.org Cc: luto@kernel.org Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: zhe.he@windriver.com Cc: joel@joelfernandes.org Cc: devel@etsukata.com Link: https://lkml.kernel.org/r/20190711114335.887392493@infradead.org
2019-07-17x86/xen: Add "nopv" support for HVM guestZhenzhong Duan1-2/+2
PVH guest needs PV extentions to work, so "nopv" parameter should be ignored for PVH but not for HVM guest. If PVH guest boots up via the Xen-PVH boot entry, xen_pvh is set early, we know it's PVH guest and ignore "nopv" parameter directly. If PVH guest boots up via the normal boot entry same as HVM guest, it's hard to distinguish PVH and HVM guest at that time. In this case, we have to panic early if PVH is detected and nopv is enabled to avoid a worse situation later. Remove static from bool_x86_init_noop/x86_op_int_noop so they could be used globally. Move xen_platform_hvm() after xen_hvm_guest_late_init() to avoid compile error. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17x86/paravirt: Remove const mark from x86_hyper_xen_hvm variableZhenzhong Duan1-8/+0
.. as "nopv" support needs it to be changeable at boot up stage. Checkpatch reports warning, so move variable declarations from hypervisor.c to hypervisor.h Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17x86: Add "nopv" parameter to disable PV extensionsZhenzhong Duan2-0/+12
In virtualization environment, PV extensions (drivers, interrupts, timers, etc) are enabled in the majority of use cases which is the best option. However, in some cases (kexec not fully working, benchmarking) we want to disable PV extensions. We have "xen_nopv" for that purpose but only for XEN. For a consistent admin experience a common command line parameter "nopv" set across all PV guest implementations is a better choice. There are guest types which just won't work without PV extensions, like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to struct hypervisor_x86 set to true for those guest types and call the detect functions only if nopv is false or ignore_nopv is true. Suggested-by: Juergen Gross <jgross@suse.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get ↵Zhenzhong Duan1-2/+1
initialized" This reverts commit ca5d376e17072c1b60c3fee66f3be58ef018952d. Commit 8990cac6e5ea ("x86/jump_label: Initialize static branching early") adds jump_label_init() call in setup_arch() to make static keys initialized early, so we could use the original simpler code again. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17x86/process: Delete useless check for dead process with LDTJann Horn1-11/+1
At release_thread(), ->mm is NULL; and it is fine for the former mm to still have an LDT. Delete this check in process_64.c, similar to commit 2684927c6b93 ("[PATCH] x86: Deprecate useless bug"), which did the same in process_32.c. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190712224152.13129-1-jannh@google.com
2019-07-16x86/e820: Use proper booleans instead of 0/1Yi Wang1-2/+2
This fixes the following coccinelle warning: ./arch/x86/kernel/e820.c:89:9-10: WARNING: return of 0/1 in function '_e820__mapped_any' with return type bool Return type bool instead of 0/1. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1563158829-44373-1-git-send-email-wang.yi59@zte.com.cn
2019-07-16x86/apic: Silence -Wtype-limits compiler warningsQian Cai1-1/+1
There are many compiler warnings like this, In file included from ./arch/x86/include/asm/smp.h:13, from ./arch/x86/include/asm/mmzone_64.h:11, from ./arch/x86/include/asm/mmzone.h:5, from ./include/linux/mmzone.h:969, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/x86/kernel/apic/io_apic.c:34: arch/x86/kernel/apic/io_apic.c: In function 'check_timer': ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " ^~~~~~~~~~~ ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " ^~~~~~~~~~~ APIC_QUIET is 0, so silence them by making apic_verbosity type int. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw
2019-07-16x86/boot: Fix memory leak in default_get_smp_config()David Rientjes1-6/+4
When default_get_smp_config() is called with early == 1 and mpf->feature1 is non-zero, mpf is leaked because the return path does not do early_memunmap(). Fix this and share a common exit routine. Fixes: 5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data") Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091942570.28240@chino.kir.corp.google.com
2019-07-15Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix ↵Andy Lutomirski1-2/+12
the test This reverts commit 48f5e52e916b55fb73754833efbacc7f8081a159. The ptrace ABI change was a prerequisite to the proposed design for FSGSBASE. Since FSGSBASE support has been reverted, and since I'm not convinced that the ABI was ever adequately tested, revert the ABI change as well. This also modifies the test case so that it tests the preexisting behavior. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/fca39c478ea7fb15bc76fe8a36bd180810a067f6.1563200250.git.luto@kernel.org
2019-07-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+21
Pull KVM updates from Paolo Bonzini: "ARM: - support for chained PMU counters in guests - improved SError handling - handle Neoverse N1 erratum #1349291 - allow side-channel mitigation status to be migrated - standardise most AArch64 system register accesses to msr_s/mrs_s - fix host MPIDR corruption on 32bit - selftests ckleanups x86: - PMU event {white,black}listing - ability for the guest to disable host-side interrupt polling - fixes for enlightened VMCS (Hyper-V pv nested virtualization), - new hypercall to yield to IPI target - support for passing cstate MSRs through to the guest - lots of cleanups and optimizations Generic: - Some txt->rST conversions for the documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits) Documentation: virtual: Add toctree hooks Documentation: kvm: Convert cpuid.txt to .rst Documentation: virtual: Convert paravirt_ops.txt to .rst KVM: x86: Unconditionally enable irqs in guest context KVM: x86: PMU Event Filter kvm: x86: Fix -Wmissing-prototypes warnings KVM: Properly check if "page" is valid in kvm_vcpu_unmap KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane kvm: LAPIC: write down valid APIC registers KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register KVM: arm/arm64: Add save/restore support for firmware workaround state arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests KVM: arm/arm64: Support chained PMU counters KVM: arm/arm64: Remove pmc->bitmask KVM: arm/arm64: Re-create event when setting counter value KVM: arm/arm64: Extract duplicated code to own function KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions KVM: LAPIC: ARBPRI is a reserved register for x2APIC ...
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds1-49/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-12x86: use static_cpu_has in uaccess region to avoid instrumentationMarco Elver1-1/+1
This patch is a pre-requisite for enabling KASAN bitops instrumentation; using static_cpu_has instead of boot_cpu_has avoids instrumentation of test_bit inside the uaccess region. With instrumentation, the KASAN check would otherwise be flagged by objtool. For consistency, kernel/signal.c was changed to mirror this change, however, is never instrumented with KASAN (currently unsupported under x86 32bit). Link: http://lkml.kernel.org/r/20190613125950.197667-3-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Suggested-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-42/+83
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A collection of assorted fixes: - Fix for the pinned cr0/4 fallout which escaped all testing efforts because the kvm-intel module was never loaded when the kernel was compiled with CONFIG_PARAVIRT=n. The cr0/4 accessors are moved out of line and static key is now solely used in the core code and therefore can stay in the RO after init section. So the kvm-intel and other modules do not longer reference the (read only) static key which the module loader tried to update. - Prevent an infinite loop in arch_stack_walk_user() by breaking out of the loop once the return address is detected to be 0. - Prevent the int3_emulate_call() selftest from corrupting the stack when KASAN is enabled. KASASN clobbers more registers than covered by the emulated call implementation. Convert the int3_magic() selftest to a ASM function so the compiler cannot KASANify it. - Unbreak the build with old GCC versions and with the Gold linker by reverting the 'Move of _etext to the actual end of .text'. In both cases the build fails with 'Invalid absolute R_X86_64_32S relocation: _etext' - Initialize the context lock for init_mm, which was never an issue until the alternatives code started to use a temporary mm for patching. - Fix a build warning vs. the LOWMEM_PAGES constant where clang complains rightfully about a signed integer overflow in the shift operation by converting the operand to an ULL. - Adjust the misnamed ENDPROC() of common_spurious in the 32bit entry code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/stacktrace: Prevent infinite loop in arch_stack_walk_user() x86/asm: Move native_write_cr0/4() out of line x86/pgtable/32: Fix LOWMEM_PAGES constant x86/alternatives: Fix int3_emulate_call() selftest stack corruption x86/entry/32: Fix ENDPROC of common_spurious Revert "x86/build: Move _etext to actual end of .text" x86/ldt: Initialize the context lock for init_mm
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini64-399/+94
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-07-11x86/stacktrace: Prevent infinite loop in arch_stack_walk_user()Eiichi Tsukata1-5/+3
arch_stack_walk_user() checks `if (fp == frame.next_fp)` to prevent a infinite loop by self reference but it's not enogh for circular reference. Once a lack of return address is found, there is no point to continue the loop, so break out. Fixes: 02b67518e2b1 ("tracing: add support for userspace stacktraces in tracing/iter_ctrl") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20190711023501.963-1-devel@etsukata.com
2019-07-10x86/asm: Move native_write_cr0/4() out of lineThomas Gleixner2-29/+57
The pinning of sensitive CR0 and CR4 bits caused a boot crash when loading the kvm_intel module on a kernel compiled with CONFIG_PARAVIRT=n. The reason is that the static key which controls the pinning is marked RO after init. The kvm_intel module contains a CR4 write which requires to update the static key entry list. That obviously does not work when the key is in a RO section. With CONFIG_PARAVIRT enabled this does not happen because the CR4 write uses the paravirt indirection and the actual write function is built in. As the key is intended to be immutable after init, move native_write_cr0/4() out of line. While at it consolidate the update of the cr4 shadow variable and store the value right away when the pinning is initialized on a booting CPU. No point in reading it back 20 instructions later. This allows to confine the static key and the pinning variable to cpu/common and allows to mark them static. Fixes: 8dbec27a242c ("x86/asm: Pin sensitive CR0 bits") Fixes: 873d50d58f67 ("x86/asm: Pin sensitive CR4 bits") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Xi Ruoyao <xry111@mengyan1223.wang> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Xi Ruoyao <xry111@mengyan1223.wang> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907102140340.1758@nanos.tec.linutronix.de
2019-07-09x86/alternatives: Fix int3_emulate_call() selftest stack corruptionPeter Zijlstra1-5/+20
KASAN shows the following splat during boot: BUG: KASAN: unknown-crash in unwind_next_frame+0x3f6/0x490 Read of size 8 at addr ffffffff84007db0 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Tainted: G T 5.2.0-rc6-00013-g7457c0d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x19/0x1b print_address_description+0x1b0/0x2b2 __kasan_report+0x10f/0x171 kasan_report+0x12/0x1c __asan_load8+0x54/0x81 unwind_next_frame+0x3f6/0x490 unwind_next_frame+0x1b/0x23 arch_stack_walk+0x68/0xa5 stack_trace_save+0x7b/0xa0 save_trace+0x3c/0x93 mark_lock+0x1ef/0x9b1 lock_acquire+0x122/0x221 __mutex_lock+0xb6/0x731 mutex_lock_nested+0x16/0x18 _vm_unmap_aliases+0x141/0x183 vm_unmap_aliases+0x14/0x16 change_page_attr_set_clr+0x15e/0x2f2 set_memory_4k+0x2a/0x2c check_bugs+0x11fd/0x1298 start_kernel+0x793/0x7eb x86_64_start_reservations+0x55/0x76 x86_64_start_kernel+0x87/0xaa secondary_startup_64+0xa4/0xb0 Memory state around the buggy address: ffffffff84007c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 ffffffff84007d00: f1 00 00 00 00 00 00 00 00 00 f2 f2 f2 f3 f3 f3 >ffffffff84007d80: f3 79 be 52 49 79 be 00 00 00 00 00 00 00 00 f1 It turns out that int3_selftest() is corrupting the stack. The problem is that the KASAN-ified version of int3_magic() is much less trivial than the C code appears. It clobbers several unexpected registers. So when the selftest's INT3 is converted to an emulated call to int3_magic(), the registers are clobbered and Bad Things happen when the function returns. Fix this by converting int3_magic() to the trivial ASM function it should be, avoiding all calling convention issues. Also add ASM_CALL_CONSTRAINT to the INT3 ASM, since it contains a 'CALL'. [peterz: cribbed changelog from josh] Fixes: 7457c0da024b ("x86/alternatives: Add int3_emulate_call() selftest") Reported-by: kernel test robot <rong.a.chen@intel.com> Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20190709125744.GB3402@hirez.programming.kicks-ass.net
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds4-4/+4
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-09Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds5-6/+75
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x865 kdump updates from Thomas Gleixner: "Yet more kexec/kdump updates: - Properly support kexec when AMD's memory encryption (SME) is enabled - Pass reserved e820 ranges to the kexec kernel so both PCI and SME can work" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active x86/kexec: Set the C-bit in the identity map page table when SEV is active x86/kexec: Do not map kexec area as decrypted when SEV is active x86/crash: Add e820 reserved ranges to kdump kernel's e820 table x86/mm: Rework ioremap resource mapping determination x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED x86/mm: Create a workarea in the kernel for SME early encryption x86/mm: Identify the end of the kernel area to be reserved
2019-07-09Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds3-3/+104
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Thomas Gleixner: "Assorted updates to kexec/kdump: - Proper kexec support for 4/5-level paging and jumping from a 5-level to a 4-level paging kernel. - Make the EFI support for kexec/kdump more robust - Enforce that the GDT is properly aligned instead of getting the alignment by chance" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kdump/64: Restrict kdump kernel reservation to <64TB x86/kexec/64: Prevent kexec from 5-level paging to a 4-level only kernel x86/boot: Add xloadflags bits to check for 5-level paging support x86/boot: Make the GDT 8-byte aligned x86/kexec: Add the ACPI NVS region to the ident map x86/boot: Call get_rsdp_addr() after console_init() Revert "x86/boot: Disable RSDP parsing temporarily" x86/boot: Use efi_setup_data for searching RSDP on kexec-ed kernels x86/kexec: Add the EFI system tables and ACPI tables to the ident map
2019-07-09Revert "x86/build: Move _etext to actual end of .text"Ross Zwisler1-3/+3
This reverts commit 392bef709659abea614abfe53cf228e7a59876a4. Per the discussion here: https://lkml.kernel.org/r/201906201042.3BF5CD6@keescook the above referenced commit breaks kernel compilation with old GCC toolchains as well as current versions of the Gold linker. Revert it to fix the regression and to keep the ability to compile the kernel with these tools. Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Guenter Roeck <groeck@chromium.org> Cc: <stable@vger.kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Kees Cook <keescook@chromium.org> Cc: Johannes Hirte <johannes.hirte@datenkhaos.de> Cc: Klaus Kusche <klaus.kusche@computerix.info> Cc: samitolvanen@google.com Cc: Guenter Roeck <groeck@google.com> Link: https://lkml.kernel.org/r/20190701155208.211815-1-zwisler@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds7-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-07-08Merge branch 'next-integrity' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Bug fixes, code clean up, and new features: - IMA policy rules can be defined in terms of LSM labels, making the IMA policy dependent on LSM policy label changes, in particular LSM label deletions. The new environment, in which IMA-appraisal is being used, frequently updates the LSM policy and permits LSM label deletions. - Prevent an mmap'ed shared file opened for write from also being mmap'ed execute. In the long term, making this and other similar changes at the VFS layer would be preferable. - The IMA per policy rule template format support is needed for a couple of new/proposed features (eg. kexec boot command line measurement, appended signatures, and VFS provided file hashes). - Other than the "boot-aggregate" record in the IMA measuremeent list, all other measurements are of file data. Measuring and storing the kexec boot command line in the IMA measurement list is the first buffer based measurement included in the measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: Introduce struct evm_xattr ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition KEXEC: Call ima_kexec_cmdline to measure the boot command line args IMA: Define a new template field buf IMA: Define a new hook to measure the kexec boot command line arguments IMA: support for per policy rule template formats integrity: Fix __integrity_init_keyring() section mismatch ima: Use designated initializers for struct ima_event_data ima: use the lsm policy update notifier LSM: switch to blocking policy update notifiers x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY ima: Make arch_policy_entry static ima: prevent a file already mmap'ed write to be mmap'ed execute x86/ima: check EFI SetupMode too
2019-07-08Merge branch 'x86-topology-for-linus' of ↵Linus Torvalds3-19/+139
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 topology updates from Ingo Molnar: "Implement multi-die topology support on Intel CPUs and expose the die topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui. These changes should have no effect on the kernel's existing understanding of topologies, i.e. there should be no behavioral impact on cache, NUMA, scheduler, perf and other topologies and overall system performance" * 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages perf/x86/intel/cstate: Support multi-die/package perf/x86/intel/rapl: Support multi-die/package perf/x86/intel/uncore: Support multi-die/package topology: Create core_cpus and die_cpus sysfs attributes topology: Create package_cpus sysfs attribute hwmon/coretemp: Support multi-die/package powercap/intel_rapl: Update RAPL domain name and debug messages thermal/x86_pkg_temp_thermal: Support multi-die/package powercap/intel_rapl: Support multi-die/package powercap/intel_rapl: Simplify rapl_find_package() x86/topology: Define topology_logical_die_id() x86/topology: Define topology_die_id() cpu/topology: Export die_id x86/topology: Create topology_max_die_per_package() x86/topology: Add CPUID.1F multi-die/package support
2019-07-08Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds5-2/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updayes from Ingo Molnar: "Most of the commits add ACRN hypervisor guest support, plus two cleanups" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/jailhouse: Mark jailhouse_x2apic_available() as __init x86/platform/geode: Drop <linux/gpio.h> includes x86/acrn: Use HYPERVISOR_CALLBACK_VECTOR for ACRN guest upcall vector x86: Add support for Linux guests on an ACRN hypervisor x86/Kconfig: Add new X86_HV_CALLBACK_VECTOR config symbol
2019-07-08Merge branch 'x86-paravirt-for-linus' of ↵Linus Torvalds7-202/+185
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt updates from Ingo Molnar: "A handful of paravirt patching code enhancements to make it more robust against patching failures, and related cleanups and not so related cleanups - by Thomas Gleixner and myself" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/paravirt: Rename paravirt_patch_site::instrtype to paravirt_patch_site::type x86/paravirt: Standardize 'insn_buff' variable names x86/paravirt: Match paravirt patchlet field definition ordering to initialization ordering x86/paravirt: Replace the paravirt patch asm magic x86/paravirt: Unify the 32/64 bit paravirt patching code x86/paravirt: Detect over-sized patching bugs in paravirt_patch_call() x86/paravirt: Detect over-sized patching bugs in paravirt_patch_insns() x86/paravirt: Remove bogus extern declarations
2019-07-08Merge branch 'x86-core-for-linus' of ↵Linus Torvalds1-0/+47
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 AVX512 status update from Ingo Molnar: "This adds a new ABI that the main scheduler probably doesn't want to deal with but HPC job schedulers might want to use: the AVX512_elapsed_ms field in the new /proc/<pid>/arch_status task status file, which allows the user-space job scheduler to cluster such tasks, to avoid turbo frequency drops" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/filesystems/proc.txt: Add arch_status file x86/process: Add AVX-512 usage elapsed time to /proc/pid/arch_status proc: Add /proc/<pid>/arch_status
2019-07-08Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds4-15/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc small cleanups: removal of superfluous code and coding style cleanups mostly" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Make variable static and config dependent x86/defconfigs: Remove useless UEVENT_HELPER_PATH x86/amd_nb: Make hygon_nb_misc_ids static x86/tsc: Move inline keyword to the beginning of function declarations x86/io_delay: Define IO_DELAY macros in C instead of Kconfig x86/io_delay: Break instead of fallthrough in switch statement
2019-07-08Merge branch 'x86-cache-for-linus' of ↵Linus Torvalds2-11/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache resource control update from Ingo Molnar: "Two cleanup patches" * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Cleanup cbm_ensure_valid() x86/resctrl: Use _ASM_BX to avoid ifdeffery
2019-07-08Merge branch 'x86-build-for-linus' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build updates from Ingo Molnar: "Two kbuild enhancements by Masahiro Yamada" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Remove redundant 'clean-files += capflags.c' x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c
2019-07-08Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds17-172/+201
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "Most of the changes relate to Peter Zijlstra's cleanup of ptregs handling, in particular the i386 part is now much simplified and standardized - no more partial ptregs stack frames via the esp/ss oddity. This simplifies ftrace, kprobes, the unwinder, ptrace, kdump and kgdb. There's also a CR4 hardening enhancements by Kees Cook, to make the generic platform functions such as native_write_cr4() less useful as ROP gadgets that disable SMEP/SMAP. Also protect the WP bit of CR0 against similar attacks. The rest is smaller cleanups/fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Add int3_emulate_call() selftest x86/stackframe/32: Allow int3_emulate_push() x86/stackframe/32: Provide consistent pt_regs x86/stackframe, x86/ftrace: Add pt_regs frame annotations x86/stackframe, x86/kprobes: Fix frame pointer annotations x86/stackframe: Move ENCODE_FRAME_POINTER to asm/frame.h x86/entry/32: Clean up return from interrupt preemption path x86/asm: Pin sensitive CR0 bits x86/asm: Pin sensitive CR4 bits Documentation/x86: Fix path to entry_32.S x86/asm: Remove unused TASK_TI_flags from asm-offsets.c
2019-07-08Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Remove the unused per rq load array and all its infrastructure, by Dietmar Eggemann. - Add utilization clamping support by Patrick Bellasi. This is a refinement of the energy aware scheduling framework with support for boosting of interactive and capping of background workloads: to make sure critical GUI threads get maximum frequency ASAP, and to make sure background processing doesn't unnecessarily move to cpufreq governor to higher frequencies and less energy efficient CPU modes. - Add the bare minimum of tracepoints required for LISA EAS regression testing, by Qais Yousef - which allows automated testing of various power management features, including energy aware scheduling. - Restructure the former tsk_nr_cpus_allowed() facility that the -rt kernel used to modify the scheduler's CPU affinity logic such as migrate_disable() - introduce the task->cpus_ptr value instead of taking the address of &task->cpus_allowed directly - by Sebastian Andrzej Siewior. - Misc optimizations, fixes, cleanups and small enhancements - see the Git log for details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched/uclamp: Add uclamp support to energy_compute() sched/uclamp: Add uclamp_util_with() sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks sched/uclamp: Set default clamps for RT tasks sched/uclamp: Reset uclamp values on RESET_ON_FORK sched/uclamp: Extend sched_setattr() to support utilization clamping sched/core: Allow sched_setattr() to use the current policy sched/uclamp: Add system default clamps sched/uclamp: Enforce last task's UCLAMP_MAX sched/uclamp: Add bucket local max tracking sched/uclamp: Add CPU's clamp buckets refcounting sched/fair: Rename weighted_cpuload() to cpu_runnable_load() sched/debug: Export the newly added tracepoints sched/debug: Add sched_overutilized tracepoint sched/debug: Add new tracepoint to track PELT at se level sched/debug: Add new tracepoints to track PELT at rq level sched/debug: Add a new sched_trace_*() helper functions sched/autogroup: Make autogroup_path() always available sched/wait: Deduplicate code with do-while sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity() ...
2019-07-08Merge branch 'ras-core-for-linus' of ↵Linus Torvalds5-154/+178
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "Boris is on vacation so I'm sending the RAS bits this time. The main changes were: - Various RAS/CEC improvements and fixes by Borislav Petkov: - error insertion fixes - offlining latency fix - memory leak fix - additional sanity checks - cleanups - debug output improvements - More SMCA enhancements by Yazen Ghannam: - make banks truly per-CPU which they are in the hardware - don't over-cache certain registers - make the number of MCA banks per-CPU variable The long term goal with these changes is to support future heterogenous SMCA extensions. - Misc fixes and improvements" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Do not check return value of debugfs_create functions x86/MCE: Determine MCA banks' init state properly x86/MCE: Make the number of MCA banks a per-CPU variable x86/MCE/AMD: Don't cache block addresses on SMCA systems x86/MCE: Make mce_banks a per-CPU array x86/MCE: Make struct mce_banks[] static RAS/CEC: Add copyright RAS/CEC: Add CONFIG_RAS_CEC_DEBUG and move CEC debug features there RAS/CEC: Dump the different array element sections RAS/CEC: Rename count_threshold to action_threshold RAS/CEC: Sanity-check array on every insertion RAS/CEC: Fix potential memory leak RAS/CEC: Do not set decay value on error RAS/CEC: Check count_threshold unconditionally RAS/CEC: Fix pfn insertion
2019-07-08Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-59/+216
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - rwsem scalability improvements, phase #2, by Waiman Long, which are rather impressive: "On a 2-socket 40-core 80-thread Skylake system with 40 reader and writer locking threads, the min/mean/max locking operations done in a 5-second testing window before the patchset were: 40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810 40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255 After the patchset, they became: 40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741 40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098" There's a lot of changes to the locking implementation that makes it similar to qrwlock, including owner handoff for more fair locking. Another microbenchmark shows how across the spectrum the improvements are: "With a locking microbenchmark running on 5.1 based kernel, the total locking rates (in kops/s) on a 2-socket Skylake system with equal numbers of readers and writers (mixed) before and after this patchset were: # of Threads Before Patch After Patch ------------ ------------ ----------- 2 2,618 4,193 4 1,202 3,726 8 802 3,622 16 729 3,359 32 319 2,826 64 102 2,744" The changes are extensive and the patch-set has been through several iterations addressing various locking workloads. There might be more regressions, but unless they are pathological I believe we want to use this new implementation as the baseline going forward. - jump-label optimizations by Daniel Bristot de Oliveira: the primary motivation was to remove IPI disturbance of isolated RT-workload CPUs, which resulted in the implementation of batched jump-label updates. Beyond the improvement of the real-time characteristics kernel, in one test this patchset improved static key update overhead from 57 msecs to just 1.4 msecs - which is a nice speedup as well. - atomic64_t cross-arch type cleanups by Mark Rutland: over the last ~10 years of atomic64_t existence the various types used by the APIs only had to be self-consistent within each architecture - which means they became wildly inconsistent across architectures. Mark puts and end to this by reworking all the atomic64 implementations to use 's64' as the base type for atomic64_t, and to ensure that this type is consistently used for parameters and return values in the API, avoiding further problems in this area. - A large set of small improvements to lockdep by Yuyang Du: type cleanups, output cleanups, function return type and othr cleanups all around the place. - A set of percpu ops cleanups and fixes by Peter Zijlstra. - Misc other changes - please see the Git log for more details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits) locking/lockdep: increase size of counters for lockdep statistics locking/atomics: Use sed(1) instead of non-standard head(1) option locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING x86/jump_label: Make tp_vec_nr static x86/percpu: Optimize raw_cpu_xchg() x86/percpu, sched/fair: Avoid local_clock() x86/percpu, x86/irq: Relax {set,get}_irq_regs() x86/percpu: Relax smp_processor_id() x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}() locking/rwsem: Guard against making count negative locking/rwsem: Adaptive disabling of reader optimistic spinning locking/rwsem: Enable time-based spinning on reader-owned rwsem locking/rwsem: Make rwsem->owner an atomic_long_t locking/rwsem: Enable readers spinning on writer locking/rwsem: Clarify usage of owner's nonspinaable bit locking/rwsem: Wake up almost all readers in wait queue locking/rwsem: More optimal RT task handling of null owner locking/rwsem: Always release wait_lock before waking up tasks locking/rwsem: Implement lock handoff to prevent lock starvation locking/rwsem: Make rwsem_spin_on_owner() return owner state ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-23 13:50:28 +0000