summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/tsc.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-06x86/tsc: Make calibration refinement more robustDaniel Vacek1-14/+16
The threshold in tsc_read_refs() is constant which may favor slower CPUs but may not be optimal for simple reading of reference on faster ones. Hence make it proportional to tsc_khz when available to compensate for this. The threshold guards against any disturbance like IRQs, NMIs, SMIs or CPU stealing by host on guest systems so rename it accordingly and fix comments as well. Also on some systems there is noticeable DMI bus contention at some point during boot keeping the readout failing (observed with about one in ~300 boots when testing). In that case retry also the second readout instead of simply bailing out unrefined. Usually the next second the readout returns fast just fine without any issues. Signed-off-by: Daniel Vacek <neelx@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/1541437840-29293-1-git-send-email-neelx@redhat.com
2018-10-23Merge branch 'x86-paravirt-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt updates from Ingo Molnar: "Two main changes: - Remove no longer used parts of the paravirt infrastructure and put large quantities of paravirt ops under a new config option PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross) - Enable PV spinlocks on Hyperv (Yi Sun)" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Enable PV qspinlock for Hyper-V x86/hyperv: Add GUEST_IDLE_MSR support x86/paravirt: Clean up native_patch() x86/paravirt: Prevent redefinition of SAVE_FLAGS macro x86/xen: Make xen_reservation_lock static x86/paravirt: Remove unneeded mmu related paravirt ops bits x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella x86/paravirt: Introduce new config option PARAVIRT_XXL x86/paravirt: Remove unused paravirt bits x86/paravirt: Use a single ops structure x86/paravirt: Remove clobbers from struct paravirt_patch_site x86/paravirt: Remove clobbers parameter from paravirt patch functions x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static x86/xen: Add SPDX identifier in arch/x86/xen files x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-23Merge branch 'x86/cache' into perf/core, to pick up fixesIngo Molnar1-0/+4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-14x86/tsc: Force inlining of cyc2ns bitsPeter Zijlstra1-3/+3
Looking at the asm for native_sched_clock() I noticed we don't inline enough. Mostly caused by sharing code with cyc2ns_read_begin(), which we didn't used to do. So mark all that __force_inline to make it DTRT. Fixes: 59eaef78bfea ("x86/tsc: Remodel cyc2ns to use seqcount_latch()") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: hpa@zytor.com Cc: eric.dumazet@gmail.com Cc: bp@alien8.de Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181011104019.695196158@infradead.org
2018-10-02x86/tsc: Fix UV TSC initializationMike Travis1-0/+4
The recent rework of the TSC calibration code introduced a regression on UV systems as it added a call to tsc_early_init() which initializes the TSC ADJUST values before acpi_boot_table_init(). In the case of UV systems, that is a necessary step that calls uv_system_init(). This informs tsc_sanitize_first_cpu() that the kernel runs on a platform with async TSC resets as documented in commit 341102c3ef29 ("x86/tsc: Add option that TSC on Socket 0 being non-zero is valid") Fix it by skipping the early tsc initialization on UV systems and let TSC init tests take place later in tsc_init(). Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once") Suggested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Russ Anderson <rja@hpe.com> Reviewed-by: Dimitri Sivanich <sivanich@hpe.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <len.brown@intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Xiaoming Gao <gxm.linux.kernel@gmail.com> Cc: Rajvi Jingar <rajvi.jingar@intel.com> Link: https://lkml.kernel.org/r/20181002180144.923579706@stormcage.americas.sgi.com
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra1-1/+1
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-06x86/tsc: Prevent result truncation on 32bitChuanhua Lei1-1/+1
Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then dividing it by HZ. Both tsc_khz and the temporary variable holding the multiplication result are of type unsigned long, so on 32bit the result is truncated to the lower 32bit. Use u64 as type for the temporary variable and cast tsc_khz to it before multiplying. [ tglx: Massaged changelog and removed pointless braces ] Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once") Signed-off-by: Chuanhua Lei <chuanhua.lei@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: yixin.zhu@linux.intel.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Tatashin <pasha.tatashin@microsoft.com> Cc: Rajvi Jingar <rajvi.jingar@intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@linux.intel.com
2018-09-03x86/paravirt: Use a single ops structureJuergen Gross1-1/+1
Instead of using six globally visible paravirt ops structures combine them in a single structure, keeping the original structures as sub-structures. This avoids the need to assemble struct paravirt_patch_template at runtime on the stack each time apply_paravirt() is being called (i.e. when loading a module). [ tglx: Made the struct and the initializer tabular for readability sake ] Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: boris.ostrovsky@oracle.com Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-9-jgross@suse.com
2018-07-30x86/tsc: Consolidate init codeDou Liyang1-10/+12
Split out suplicated code from tsc_early_init() and tsc_init() into a common helper and fixup some comment typos. [ tglx: Massaged changelog and renamed function ] Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180730075421.22830-2-douly.fnst@cn.fujitsu.com
2018-07-20x86/tsc: Make use of tsc_calibrate_cpu_early()Pavel Tatashin1-6/+19
During early boot enable tsc_calibrate_cpu_early() and switch to tsc_calibrate_cpu() only later. Do this unconditionally, because it is unknown what methods other cpus will use to calibrate once they are onlined. If by the time tsc_init() is called tsc frequency is still unknown do only pit_hpet_ptimer_calibrate_cpu() to calibrate, as this function contains the only methods wich have not been called and tried earlier. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-27-pasha.tatashin@oracle.com
2018-07-20x86/tsc: Split native_calibrate_cpu() into early and late partsPavel Tatashin1-18/+36
During early boot TSC and CPU frequency can be calibrated using MSR, CPUID, and quick PIT calibration methods. The other methods PIT/HPET/PMTIMER are available only after ACPI is initialized. Split native_calibrate_cpu() into early and late parts so they can be called separately during early and late tsc calibration. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-26-pasha.tatashin@oracle.com
2018-07-20x86/tsc: Use TSC as sched clock earlyPavel Tatashin1-0/+1
All prerequesites for enabling TSC as sched clock early in the boot process are available now: - Early attempt of TSC calibration - Early availablity of static branch patching If TSC frequency can be established in the early calibration, enable the static key which switches sched clock to use TSC. [ tglx: Massaged changelog ] Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-22-pasha.tatashin@oracle.com
2018-07-20x86/tsc: Initialize cyc2ns when tsc frequency is determinedPavel Tatashin1-41/+53
cyc2ns converts tsc to nanoseconds, and it is handled in a per-cpu data structure. Currently, the setup code for c2ns data for every possible CPU goes through the same sequence of calculations as for the boot CPU, but is based on the same tsc frequency as the boot CPU, and thus this is not necessary. Initialize the boot cpu when tsc frequency is determined. Copy the calculated data from the boot CPU to the other CPUs in tsc_init(). In addition do the following: - Remove unnecessary zeroing of c2ns data by removing cyc2ns_data_init() - Split set_cyc2ns_scale() into two functions, so set_cyc2ns_scale() can be called when system is up, and wraps around __set_cyc2ns_scale() that can be called directly when system is booting but avoids saving restoring IRQs and going and waking up from idle. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-21-pasha.tatashin@oracle.com
2018-07-20x86/tsc: Calibrate tsc only oncePavel Tatashin1-40/+47
During boot tsc is calibrated twice: once in tsc_early_delay_calibrate(), and the second time in tsc_init(). Rename tsc_early_delay_calibrate() to tsc_early_init(), and rework it so the calibration is done only early, and make tsc_init() to use the values already determined in tsc_early_init(). Sometimes it is not possible to determine tsc early, as the subsystem that is required is not yet initialized, in such case try again later in tsc_init(). Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-20-pasha.tatashin@oracle.com
2018-07-20x86/tsc: Redefine notsc to behave as tsc=unstablePavel Tatashin1-15/+3
Currently, the notsc kernel parameter disables the use of the TSC by sched_clock(). However, this parameter does not prevent the kernel from accessing tsc in other places. The only rationale to boot with notsc is to avoid timing discrepancies on multi-socket systems where TSC are not properly synchronized, and thus exclude TSC from being used for time keeping. But that prevents using TSC as sched_clock() as well, which is not necessary as the core sched_clock() implementation can handle non synchronized TSC based sched clocks just fine. However, there is another method to solve the above problem: booting with tsc=unstable parameter. This parameter allows sched_clock() to use TSC and just excludes it from timekeeping. So there is no real reason to keep notsc, but for compatibility reasons the parameter has to stay. Make it behave like 'tsc=unstable' instead. [ tglx: Massaged changelog ] Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-12-pasha.tatashin@oracle.com
2018-05-02x86/tsc: Fix mark_tsc_unstable()Peter Zijlstra1-7/+5
mark_tsc_unstable() also needs to affect tsc_early, Now that clocksource_mark_unstable() can be used on a clocksource irrespective of its registration state, use it on both tsc_early and tsc. This does however require cs->list to be initialized empty, otherwise it cannot tell the registation state before registation. Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Diego Viola <diego.viola@gmail.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.533326547@infradead.org
2018-05-02x86/tsc: Always unregister clocksource_tsc_earlyPeter Zijlstra1-4/+6
Don't leave the tsc-early clocksource registered if it errors out early. This was reported by Diego, who on his Core2 era machine got TSC invalidated while it was running with tsc-early (due to C-states). This results in keeping tsc-early with very bad effects. Reported-and-Tested-by: Diego Viola <diego.viola@gmail.com> Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.350507853@infradead.org
2018-04-17x86/tsc: Prevent 32bit truncation in calc_hpet_ref()Xiaoming Gao1-1/+1
The TSC calibration code uses HPET as reference. The conversion normalizes the delta of two HPET timestamps: hpetref = ((tshpet1 - tshpet2) * HPET_PERIOD) / 1e6 and then divides the normalized delta of the corresponding TSC timestamps by the result to calulate the TSC frequency. tscfreq = ((tstsc1 - tstsc2 ) * 1e6) / hpetref This uses do_div() which takes an u32 as the divisor, which worked so far because the HPET frequency was low enough that 'hpetref' never exceeded 32bit. On Skylake machines the HPET frequency increased so 'hpetref' can exceed 32bit. do_div() truncates the divisor, which causes the calibration to fail. Use div64_u64() to avoid the problem. [ tglx: Fixes whitespace mangled patch and rewrote changelog ] Signed-off-by: Xiaoming Gao <newtongao@tencent.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: peterz@infradead.org Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/38894564-4fc9-b8ec-353f-de702839e44e@gmail.com
2018-03-16x86/tsc: Convert ART in nanoseconds to TSCRajvi Jingar1-0/+39
Device drivers use get_device_system_crosststamp() to produce precise system/device cross-timestamps. The PHC clock and ALSA interfaces, for example, make the cross-timestamps available to user applications. On Intel platforms, get_device_system_crosststamp() requires a TSC value derived from ART (Always Running Timer) to compute the monotonic raw and realtime system timestamps. Starting with Intel Goldmont platforms, the PCIe root complex supports the PTM time sync protocol. PTM requires all timestamps to be in units of nanoseconds. The Intel root complex hardware propagates system time derived from ART in units of nanoseconds performing the conversion as follows: ART_NS = ART * 1e9 / <crystal frequency> When user software requests a cross-timestamp, the system timestamps (generally read from device registers) must be converted to TSC by the driver software as follows: TSC = ART_NS * TSC_KHZ / 1e6 This is valid when CPU feature flag X86_FEATURE_TSC_KNOWN_FREQ is set indicating that tsc_khz is derived from CPUID[15H]. Drivers should check whether this flag is set before conversion to TSC is attempted. Suggested-by: Christopher S. Hall <christopher.s.hall@intel.com> Signed-off-by: Rajvi Jingar <rajvi.jingar@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/1520530116-4925-1-git-send-email-rajvi.jingar@intel.com
2018-01-14x86/tsc: Introduce early tsc clocksourcePeter Zijlstra1-10/+33
Without TSC_KNOWN_FREQ the TSC clocksource is registered so late that the kernel first switches to the HPET. Using HPET on large CPU count machines is undesirable. Therefore register a tsc-early clocksource using the preliminary tsc_khz from quick calibration. Then when the final TSC calibration is done, it can switch to the tuned frequency. The only notably problem is that the real tsc clocksource must be marked with CLOCK_SOURCE_VALID_FOR_HRES, otherwise it will not be selected when unregistering tsc-early. tsc-early cannot be left registered, because then the clocksource code would fall back to it when we tsc clocksource is marked unstable later. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: len.brown@intel.com Cc: rui.zhang@intel.com Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20171222092243.431585460@infradead.org
2018-01-14x86/tsc: Allow TSC calibration without PITPeter Zijlstra1-0/+18
Zhang Rui reported that a Surface Pro 4 will fail to boot with lapic=notscdeadline. Part of the problem is that that machine doesn't have a PIT. If, for some reason, the TSC init has to fall back to TSC calibration, it relies on the PIT to be present. Allow TSC calibration to reliably fall back to HPET. The below results in an accurate TSC measurement when forced on a IVB: tsc: Unable to calibrate against PIT tsc: No reference (HPET/PMTIMER) available tsc: Unable to calibrate against PIT tsc: using HPET reference calibration tsc: Detected 2792.451 MHz processor Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: len.brown@intel.com Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20171222092243.333145937@infradead.org
2018-01-14x86/tsc: Print tsc_khz, when it differs from cpu_khzLen Brown1-0/+6
If CPU and TSC frequency are the same the printout of the CPU frequency is valid for the TSC as well: tsc: Detected 2900.000 MHz processor If the TSC frequency is different there is no information in dmesg. Add a conditional printout: tsc: Detected 2904.000 MHz TSC Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/537b342debcd8e8aebc8d631015dcdf9f9ba8a26.1513920414.git.len.brown@intel.com
2018-01-14x86/tsc: Fix erroneous TSC rate on Skylake XeonLen Brown1-1/+0
The INTEL_FAM6_SKYLAKE_X hardcoded crystal_khz value of 25MHZ is problematic: - SKX workstations (with same model # as server variants) use a 24 MHz crystal. This results in a -4.0% time drift rate on SKX workstations. - SKX servers subject the crystal to an EMI reduction circuit that reduces its actual frequency by (approximately) -0.25%. This results in -1 second per 10 minute time drift as compared to network time. This issue can also trigger a timer and power problem, on configurations that use the LAPIC timer (versus the TSC deadline timer). Clock ticks scheduled with the LAPIC timer arrive a few usec before the time they are expected (according to the slow TSC). This causes Linux to poll-idle, when it should be in an idle power saving state. The idle and clock code do not graciously recover from this error, sometimes resulting in significant polling and measurable power impact. Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X. native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz, and the TSC refined calibration will update tsc_khz to correct for the difference. [ tglx: Sanitized change log ] Fixes: 6baf3d61821f ("x86/tsc: Add additional Intel CPU models to the crystal quirk list") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ff6dcea166e8ff8f2f6a03c17beab2cb436aa779.1513920414.git.len.brown@intel.com
2018-01-14x86/tsc: Future-proof native_calibrate_tsc()Len Brown1-0/+2
If the crystal frequency cannot be determined via CPUID(15).crystal_khz or the built-in table then native_calibrate_tsc() will still set the X86_FEATURE_TSC_KNOWN_FREQ flag which prevents the refined TSC calibration. As a consequence such systems use cpu_khz for the TSC frequency which is incorrect when cpu_khz != tsc_khz resulting in time drift. Return early when the crystal frequency cannot be retrieved without setting the X86_FEATURE_TSC_KNOWN_FREQ flag. This ensures that the refined TSC calibration is invoked. [ tglx: Steam-blastered changelog. Sigh ] Fixes: 4ca4df0b7eb0 ("x86/tsc: Mark TSC frequency determined by CPUID as known") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Bin Gao <bin.gao@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/0fe2503aa7d7fc69137141fc705541a78101d2b9.1513920414.git.len.brown@intel.com
2017-11-13Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds1-10/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer updates from Thomas Gleixner: "These updates are related to TSC handling: - Support platforms which have synchronized TSCs but the boot CPU has a non zero TSC_ADJUST value, which is considered a firmware bug on normal systems. This applies to HPE/SGI UV platforms where the platform firmware uses TSC_ADJUST to ensure TSC synchronization across a huge number of sockets, but due to power on timings the boot CPU cannot be guaranteed to have a zero TSC_ADJUST register value. - Fix the ordering of udelay calibration and kvmclock_init() - Cleanup the udelay and calibration code" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Mark cyc2ns_init() and detect_art() __init x86/platform/UV: Mark tsc_check_sync as an init function x86/tsc: Make CONFIG_X86_TSC=n build work again x86/platform/UV: Add check of TSC state set by UV BIOS x86/tsc: Provide a means to disable TSC ART x86/tsc: Drastically reduce the number of firmware bug warnings x86/tsc: Skip TSC test and error messages if already unstable x86/tsc: Add option that TSC on Socket 0 being non-zero is valid x86/timers: Move simple_udelay_calibration() past kvmclock_init() x86/timers: Make recalibrate_cpu_khz() void x86/timers: Move the simple udelay calibration to tsc.h
2017-11-10x86/tsc: Mark cyc2ns_init() and detect_art() __initDou Liyang1-2/+2
These two functions are only called by tsc_init(), which is an __init function during boot time, so mark them __init as well. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1510135792-17429-1-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07x86/smpboot: Make optimization of delay calibration work correctlyPavel Tatashin1-5/+3
If the TSC has constant frequency then the delay calibration can be skipped when it has been calibrated for a package already. This is checked in calibrate_delay_is_known(), but that function is buggy in two aspects: It returns 'false' if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC) which is obviously the reverse of the intended check and the check for the sibling mask cannot work either because the topology links have not been set up yet. Correct the condition and move the call to set_cpu_sibling_map() before invoking calibrate_delay() so the sibling check works correctly. [ tglx: Rewrote changelong ] Fixes: c25323c07345 ("x86/tsc: Use topology functions") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: bob.picco@oracle.com Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171028001100.26603-1-pasha.tatashin@oracle.com
2017-10-16x86/tsc: Provide a means to disable TSC ARTmike.travis@hpe.com1-2/+6
On systems where multiple chassis are reset asynchronously, and thus the TSC counters are started asynchronously, the offset needed to convert to TSC to ART would be different. Disable ART in that case and rely on the TSC counters to supply the accurate time. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Gao <bin.gao@linux.intel.com> Link: https://lkml.kernel.org/r/20171012163202.289397994@stormcage.americas.sgi.com
2017-09-25x86/timers: Make recalibrate_cpu_khz() voidDou Liyang1-6/+2
recalibrate_cpu_khz() is called from powernow K7 and Pentium 4/Xeon CPU freq driver. It recalibrates cpu frequency in case of SMP = n and doesn't need to return anything. Mark it void, also remove the #else branch. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1500003247-17368-2-git-send-email-douly.fnst@cn.fujitsu.com
2017-09-25x86/timers: Move the simple udelay calibration to tsc.hDou Liyang1-0/+19
Commit dd759d93f4dd ("x86/timers: Add simple udelay calibration") adds an static function in x86 boot-time initializations. But, this function is actually related to TSC, so it should be maintained in tsc.c, not in setup.c. Move simple_udelay_calibration() from setup.c to tsc.c and rename it to tsc_early_delay_calibrate for more readability. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1500003247-17368-1-git-send-email-douly.fnst@cn.fujitsu.com
2017-07-03Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timers updates from Thomas Gleixner: "This update contains: - The solution for the TSC deadline timer borkage, which is caused by a hardware problem in the TSC_ADJUST/TSC_DEADLINE_TIMER logic. The problem is documented now and fixed with a microcode update, so we can remove the workaround and just check for the microcode version. If the microcode is not up to date, then the TSC deadline timer is disabled. If the borkage is fixed by the proper microcode version, then the deadline timer can be used. In both cases the restrictions to the range of the TSC_ADJUST value, which were added as workarounds, are removed. - A few simple fixes and updates to the timer related x86 code" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Call check_system_tsc_reliable() before unsynchronized_tsc() x86/hpet: Do not use smp_processor_id() in preemptible code x86/time: Make setup_default_timer_irq() static x86/tsc: Remove the TSC_ADJUST clamp x86/apic: Add TSC_DEADLINE quirk due to errata x86/apic: Change the lapic name in deadline mode
2017-06-22x86/tsc: Call check_system_tsc_reliable() before unsynchronized_tsc()Zhenzhong Duan1-2/+2
tsc_clocksource_reliable is initialized in check_system_tsc_reliable(), but it is checked in unsynchronized_tsc() which is called before the initialization. In practice that's not an issue because systems which mark the TSC reliable have X86_FEATURE_CONSTANT_TSC set as well, which is evaluated in unsynchronized_tsc() before tsc_clocksource_reliable. Reorder the calls so initialization happens before usage. [ tglx: Massaged changelog ] Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/b1532ef7-cd9f-45f7-9f49-48dd2a5c2495@default
2017-05-23x86/tsc: Fold set_cyc2ns_scale() into callerArnd Bergmann1-10/+4
The newly introduced wrapper function only has one caller, and this one is conditional, causing a harmless warning when CONFIG_CPU_FREQ is disabled: arch/x86/kernel/tsc.c:189:13: error: 'set_cyc2ns_scale' defined but not used [-Werror=unused-function] My first idea was to move the wrapper inside of that #ifdef, but on second thought it seemed nicer to remove it completely again and rename __set_cyc2ns_scale back to set_cyc2ns_scale, but leaving the extra argument. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 615cd03373a0 ("x86/tsc: Fix sched_clock() sync") Link: http://lkml.kernel.org/r/20170517203949.2052220-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-15sched/clock: Remove unused argument to sched_clock_idle_wakeup_event()Peter Zijlstra1-1/+1
The argument to sched_clock_idle_wakeup_event() has not been used in a long time. Remove it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-15x86/tsc, sched/clock, clocksource: Use clocksource watchdog to provide ↵Peter Zijlstra1-0/+10
stable sync points Currently we keep sched_clock_tick() active for stable TSC in order to keep the per-CPU state semi up-to-date. The (obvious) problem is that by the time we detect TSC is borked, our per-CPU state is also borked. So hook into the clocksource watchdog and call a method after we've found it to still be stable. There's the obvious race where the TSC goes wonky between finding it stable and us running the callback, but closing that is too much work and not really worth it, since we're already detecting TSC wobbles after the fact, so we cannot, per definition, fully avoid funny clock values. And since the watchdog runs less often than the tick, this is also an optimization. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-15x86/tsc: Feed refined TSC calibration into sched_clock()Peter Zijlstra1-0/+5
For the (older) CPUs that still need the refined TSC calibration, also update the sched_clock() rate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-15x86/tsc: Fix sched_clock() syncPeter Zijlstra1-5/+11
While looking through the code I noticed that we initialize the cyc2ns fields with a different cycle value for each CPU, resulting in a slightly different 0 point for each CPU. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-15x86/tsc: Remodel cyc2ns to use seqcount_latch()Peter Zijlstra1-137/+36
Replace the custom multi-value scheme with the more regular seqcount_latch() scheme. Along with scrapping a lot of lines, the latch scheme is better documented and used in more places. The immediate benefit however is not being limited on the update side. The current code has a limit where the writers block which is hit by future changes. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-15x86/tsc: Provide 'tsc=unstable' boot parameterPeter Zijlstra1-0/+2
Since the clocksource watchdog will only detect broken TSC after the fact, all TSC based clocks will likely have observed non-continuous values before/when switching away from TSC. Therefore only thing to fully avoid random clock movement when your BIOS randomly mucks with TSC values from SMI handlers is reporting the TSC as unstable at boot. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-23sched/clock, x86/perf: Fix "perf test tsc"Peter Zijlstra1-2/+2
People reported that commit: 5680d8094ffa ("sched/clock: Provide better clock continuity") broke "perf test tsc". That commit added another offset to the reported clock value; so take that into account when computing the provided offset values. Reported-by: Adrian Hunter <adrian.hunter@intel.com> Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 5680d8094ffa ("sched/clock: Provide better clock continuity") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-13x86/tsc: Fix ART for TSC_KNOWN_FREQPeter Zijlstra1-0/+2
Subhransu reported that convert_art_to_tsc() isn't working for him. The ART to TSC relation is only set up for systems which use the refined TSC calibration. Systems with known TSC frequency (available via CPUID 15) are not using the refined calibration and therefor the ART to TSC relation is never established. Add the setup to the known frequency init path which skips ART calibration. The init code needs to be duplicated as for systems which use refined calibration the ART setup must be delayed until calibration has been done. The problem has been there since the ART support was introdduced, but only detected now because Subhransu tested the first time on hardware which has TSC frequency enumerated via CPUID 15. Note for stable: The conditional has changed from TSC_RELIABLE to TSC_KNOWN_FREQUENCY. [ tglx: Rewrote changelog and identified the proper 'Fixes' commit ] Fixes: f9677e0f8308 ("x86/tsc: Always Running Timer (ART) correlated clocksource") Reported-by: "Prusty, Subhransu S" <subhransu.s.prusty@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: christopher.s.hall@intel.com Cc: kevin.b.stanton@intel.com Cc: john.stultz@linaro.org Cc: akataria@vmware.com Link: http://lkml.kernel.org/r/20170313145712.GI3312@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-07Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-12/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A fix for KVM's scheduler clock which (erroneously) was always marked unstable, a fix for RT/DL load balancing, plus latency fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface sched/core: Fix pick_next_task() for RT,DL sched/fair: Make select_idle_cpu() more aggressive
2017-03-02sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interfacePeter Zijlstra1-12/+23
Wanpeng Li reported that since the following commit: acb04058de49 ("sched/clock: Fix hotplug crash") ... KVM always runs with unstable sched-clock even though KVM's kvm_clock _is_ stable. The problem is that we've tied clear_sched_clock_stable() to the TSC state, and overlooked that sched_clock() is a paravirt function. Solve this by doing two things: - tie the sched_clock() stable state more clearly to the TSC stable state for the normal (!paravirt) case. - only call clear_sched_clock_stable() when we mark TSC unstable when we use native_sched_clock(). The first means we can actually run with stable sched_clock in more situations then before, which is good. And since commit: 12907fbb1a69 ("sched/clock, clocksource: Add optional cs::mark_unstable() method") ... this should be reliable. Since any detection of TSC fail now results in marking the TSC unstable. Reported-by: Wanpeng Li <kernellwp@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: acb04058de49 ("sched/clock: Fix hotplug crash") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-20Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this (fairly busy) cycle were: - There was a class of scheduler bugs related to forgetting to update the rq-clock timestamp which can cause weird and hard to debug problems, so there's a new debug facility for this: which uncovered a whole lot of bugs which convinced us that we want to keep the debug facility. (Peter Zijlstra, Matt Fleming) - Various cputime related updates: eliminate cputime and use u64 nanoseconds directly, simplify and improve the arch interfaces, implement delayed accounting more widely, etc. - (Frederic Weisbecker) - Move code around for better structure plus cleanups (Ingo Molnar) - Move IO schedule accounting deeper into the scheduler plus related changes to improve the situation (Tejun Heo) - ... plus a round of sched/rt and sched/deadline fixes, plus other fixes, updats and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (85 commits) sched/core: Remove unlikely() annotation from sched_move_task() sched/autogroup: Rename auto_group.[ch] to autogroup.[ch] sched/topology: Split out scheduler topology code from core.c into topology.c sched/core: Remove unnecessary #include headers sched/rq_clock: Consolidate the ordering of the rq_clock methods delayacct: Include <uapi/linux/taskstats.h> sched/core: Clean up comments sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds sched/clock: Add dummy clear_sched_clock_stable() stub function sched/cputime: Remove generic asm headers sched/cputime: Remove unused nsec_to_cputime() s390, sched/cputime: Remove unused cputime definitions powerpc, sched/cputime: Remove unused cputime definitions s390, sched/cputime: Make arch_cpu_idle_time() to return nsecs ia64, sched/cputime: Remove unused cputime definitions ia64: Convert vtime to use nsec units directly ia64, sched/cputime: Move the nsecs based cputime headers to the last arch using it sched/cputime: Remove jiffies based cputime sched/cputime, vtime: Return nsecs instead of cputime_t to account sched/cputime: Complete nsec conversion of tick based accounting ...
2017-02-10x86/tsc: Avoid the large time jump when sanitizing TSC ADJUSTThomas Gleixner1-2/+3
Olof reported that on a machine which has a BIOS wreckaged TSC the timestamps in dmesg are making a large jump because the TSC value is jumping forward after resetting the TSC ADJUST register to a sane value. This can be avoided by calling the TSC ADJUST saniziting function before initializing the per cpu sched clock machinery. That takes the offset into account and avoid the time jump. What cannot be avoided is that the 'Firmware Bug' warnings on the secondary CPUs are printed with the large time offsets because it would be too much effort and ugly hackery to print those warnings into a buffer and emit them after the adjustemt on the starting CPUs. It's a firmware bug and should be fixed in firmware. The weird timestamps are collateral damage and just illustrate the sillyness of the BIOS folks: [ 0.397445] smp: Bringing up secondary CPUs ... [ 0.402100] x86: Booting SMP configuration: [ 0.406343] .... node #0, CPUs: #1 [1265776479.930667] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU1: -2978888639183101 [1265776479.944664] TSC ADJUST synchronize: Reference CPU0: 0 CPU1: -2978888639183101 [ 0.508119] #2 [1265776480.032346] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU2: -2978888639183677 [1265776480.044192] TSC ADJUST synchronize: Reference CPU0: 0 CPU2: -2978888639183677 [ 0.607643] #3 [1265776480.131874] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU3: -2978888639184530 [1265776480.143720] TSC ADJUST synchronize: Reference CPU0: 0 CPU3: -2978888639184530 [ 0.707108] smp: Brought up 1 node, 4 CPUs [ 0.711271] smpboot: Total of 4 processors activated (21698.88 BogoMIPS) Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170209151231.411460506@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-01Merge branch 'linus' into sched/core, to pick up fixes and refresh the branchIngo Molnar1-0/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14sched/clock, clocksource: Add optional cs::mark_unstable() methodThomas Gleixner1-0/+11
PeterZ reported that we'd fail to mark the TSC unstable when the clocksource watchdog finds it unsuitable. Allow a clocksource to run a custom action when its being marked unstable and hook up the TSC unstable code. Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc()Len Brown1-0/+1
The Intel Denverton microserver uses a 25 MHz TSC crystal, so we can derive its exact [*] TSC frequency using CPUID and some arithmetic, eg.: TSC: 1800 MHz (25000000 Hz * 216 / 3 / 1000000) [*] 'exact' is only as good as the crystal, which should be +/- 20ppm Signed-off-by: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/306899f94804aece6d8fa8b4223ede3b48dbb59c.1484287748.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 10:07:45 +0000