| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES support from Borislav Petkov:
"SEV-ES enhances the current guest memory encryption support called SEV
by also encrypting the guest register state, making the registers
inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared
between the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
so in order for that exception mechanism to work, the early x86 init
code needed to be made able to handle exceptions, which, in itself,
brings a bunch of very nice cleanups and improvements to the early
boot code like an early page fault handler, allowing for on-demand
building of the identity mapping. With that, !KASLR configurations do
not use the EFI page table anymore but switch to a kernel-controlled
one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly separate
from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and
behind static keys to minimize the performance impact on !SEV-ES
setups.
Work by Joerg Roedel and Thomas Lendacky and others"
* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
x86/sev-es: Check required CPU features for SEV-ES
x86/efi: Add GHCB mappings when SEV-ES is active
x86/sev-es: Handle NMI State
x86/sev-es: Support CPU offline/online
x86/head/64: Don't call verify_cpu() on starting APs
x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
x86/realmode: Setup AP jump table
x86/realmode: Add SEV-ES specific trampoline entry point
x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
x86/sev-es: Handle #DB Events
x86/sev-es: Handle #AC Events
x86/sev-es: Handle VMMCALL Events
x86/sev-es: Handle MWAIT/MWAITX Events
x86/sev-es: Handle MONITOR/MONITORX Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle RDTSC(P) Events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Borislav Petkov:
"Two asm wrapper fixes:
- Use XORL instead of XORQ to avoid a REX prefix and save some bytes
in the .fixup section, by Uros Bizjak.
- Replace __force_order dummy variable with a memory clobber to fix
LLVM requiring a definition for former and to prevent memory
accesses from still being cached/reordered, by Arvind Sankar"
* tag 'x86_asm_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Replace __force_order with a memory clobber
x86/uaccess: Use XORL %0,%0 in __get_user_asm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 Hyper-V update from Ingo Molnar:
"A single commit harmonizing the x86 and ARM64 Hyper-V constants
namespace"
* tag 'x86-hyperv-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Remove aliases with X64 in their name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt cleanup from Ingo Molnar:
"Clean up the paravirt code after the removal of 32-bit Xen PV support"
* tag 'x86-paravirt-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Avoid needless paravirt step clearing page table entries
x86/paravirt: Remove set_pte_at() pv-op
x86/entry/32: Simplify CONFIG_XEN_PV build dependency
x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT
x86/paravirt: Clean up paravirt macros
x86/paravirt: Remove 32-bit support from CONFIG_PARAVIRT_XXL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- Misc cleanups to the resctrl code in preparation for the ARM side
(James Morse)
- Add support for controlling per-thread memory bandwidth throttling
delay values on hw which supports it (Fenghua Yu)
* tag 'x86_cache_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Enable user to view thread or core throttling mode
x86/resctrl: Enumerate per-thread MBA controls
cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps
x86/resctrl: Merge AMD/Intel parse_bw() calls
x86/resctrl: Add struct rdt_membw::arch_needs_linear to explain AMD/Intel MBA difference
x86/resctrl: Use is_closid_match() in more places
x86/resctrl: Include pid.h
x86/resctrl: Use container_of() in delayed_work handlers
x86/resctrl: Fix stale comment
x86/resctrl: Remove struct rdt_membw::max_delay
x86/resctrl: Remove unused struct mbm_state::chunks_bw
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"Misc minor cleanups"
* tag 'x86_cleanups_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix typo in comments for syscall_enter_from_user_mode()
x86/resctrl: Fix spelling in user-visible warning messages
x86/entry/64: Do not include inst.h in calling.h
x86/mpparse: Remove duplicate io_apic.h include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Borislav Petkov:
- Allow clearcpuid= to accept multiple bits (Arvind Sankar)
- Move clearcpuid= parameter handling earlier in the boot, away from
the FPU init code and to a generic location (Mike Hommey)
* tag 'x86_fpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Handle FPU-related and clearcpuid command line arguments earlier
x86/fpu: Allow multiple bits in clearcpuid= parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Add support for hardware-enforced cache coherency on AMD which
obviates the need to flush cachelines before changing the PTE
encryption bit (Krish Sadhukhan)
- Add Centaur initialization support for families >= 7 (Tony W Wang-oc)
- Add a feature flag for, and expose TSX suspend load tracking feature
to KVM (Cathy Zhang)
- Emulate SLDT and STR so that windows programs don't crash on UMIP
machines (Brendan Shanks and Ricardo Neri)
- Use the new SERIALIZE insn on Intel hardware which supports it
(Ricardo Neri)
- Misc cleanups and fixes
* tag 'x86_cpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: SVM: Don't flush cache if hardware enforces cache coherency across encryption domains
x86/mm/pat: Don't flush cache if hardware enforces cache coherency across encryption domnains
x86/cpu: Add hardware-enforced cache coherency as a CPUID feature
x86/cpu/centaur: Add Centaur family >=7 CPUs initialization support
x86/cpu/centaur: Replace two-condition switch-case with an if statement
x86/kvm: Expose TSX Suspend Load Tracking feature
x86/cpufeatures: Enumerate TSX suspend load address tracking instructions
x86/umip: Add emulation/spoofing for SLDT and STR instructions
x86/cpu: Fix typos and improve the comments in sync_core()
x86/cpu: Use XGETBV and XSETBV mnemonics in fpu/internal.h
x86/cpu: Use SERIALIZE in sync_core() when available
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
|
|
All instructions copying data between kernel and user memory
are tagged with either _ASM_EXTABLE_UA or _ASM_EXTABLE_CPY
entries in the exception table. ex_fault_handler_type() returns
EX_HANDLER_UACCESS for both of these.
Recovery is only possible when the machine check was triggered
on a read from user memory. In this case the same strategy for
recovery applies as if the user had made the access in ring3. If
the fault was in kernel memory while copying to user there is no
current recovery plan.
For MOV and MOVZ instructions a full decode of the instruction
is done to find the source address. For MOVS instructions
the source address is in the %rsi register. The function
fault_in_kernel_space() determines whether the source address is
kernel or user, upgrade it from "static" so it can be used here.
Co-developed-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-7-tony.luck@intel.com
|
|
Existing kernel code can only recover from a machine check on code that
is tagged in the exception table with a fault handling recovery path.
Add two new fields in the task structure to pass information from
machine check handler to the "task_work" that is queued to run before
the task returns to user mode:
+ mce_vaddr: will be initialized to the user virtual address of the fault
in the case where the fault occurred in the kernel copying data from
a user address. This is so that kill_me_maybe() can provide that
information to the user SIGBUS handler.
+ mce_kflags: copy of the struct mce.kflags needed by kill_me_maybe()
to determine if mce_vaddr is applicable to this error.
Add code to recover from a machine check while copying data from user
space to the kernel. Action for this case is the same as if the user
touched the poison directly; unmap the page and send a SIGBUS to the task.
Use a new helper function to share common code between the "fault
in user mode" case and the "fault while copying from user" case.
New code paths will be activated by the next patch which sets
MCE_IN_KERNEL_COPYIN.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-6-tony.luck@intel.com
|
|
Avoid a proliferation of ex_has_*_handler() functions by having just
one function that returns the type of the handler (if any).
Drop the __visible attribute for this function. It is not called
from assembler so the attribute is not necessary.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-3-tony.luck@intel.com
|
|
New recovery features require additional information about processor
state when a machine check occurred. Pass pt_regs down to the routines
that need it.
No functional change.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-2-tony.luck@intel.com
|
|
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
|
|
The CRn accessor functions use __force_order as a dummy operand to
prevent the compiler from reordering CRn reads/writes with respect to
each other.
The fact that the asm is volatile should be enough to prevent this:
volatile asm statements should be executed in program order. However GCC
4.9.x and 5.x have a bug that might result in reordering. This was fixed
in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x,
may reorder volatile asm statements with respect to each other.
There are some issues with __force_order as implemented:
- It is used only as an input operand for the write functions, and hence
doesn't do anything additional to prevent reordering writes.
- It allows memory accesses to be cached/reordered across write
functions, but CRn writes affect the semantics of memory accesses, so
this could be dangerous.
- __force_order is not actually defined in the kernel proper, but the
LLVM toolchain can in some cases require a definition: LLVM (as well
as GCC 4.9) requires it for PIE code, which is why the compressed
kernel has a definition, but also the clang integrated assembler may
consider the address of __force_order to be significant, resulting in
a reference that requires a definition.
Fix this by:
- Using a memory clobber for the write functions to additionally prevent
caching/reordering memory accesses across CRn writes.
- Using a dummy input operand with an arbitrary constant address for the
read functions, instead of a global variable. This will prevent reads
from being reordered across writes, while allowing memory loads to be
cached/reordered across CRn reads, which should be safe.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
Link: https://lore.kernel.org/lkml/20200527135329.1172644-1-arnd@arndb.de/
Link: https://lkml.kernel.org/r/20200902232152.3709896-1-nivedita@alum.mit.edu
|
|
The recent fix for NMI vs. IRQ state tracking missed to apply the cure
to the MCE handler.
Fixes: ba1f2b2eaa2a ("x86/entry: Fix NMI vs IRQ state tracking")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/87mu17ism2.fsf@nanos.tec.linutronix.de
|
|
Way back in v3.19 Intel and AMD shared the same machine check severity
grading code. So it made sense to add a case for AMD DEFERRED errors in
commit
e3480271f592 ("x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error")
But later in v4.2 AMD switched to a separate grading function in
commit
bf80bbd7dcf5 ("x86/mce: Add an AMD severities-grading function")
Belatedly drop the DEFERRED case from the Intel rule list.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200930021313.31810-3-tony.luck@intel.com
|
|
The patrol scrubber in Skylake and Cascade Lake systems can be configured
to report uncorrected errors using a special signature in the machine
check bank and to signal using CMCI instead of machine check.
Update the severity calculation mechanism to allow specifying the model,
minimum stepping and range of machine check bank numbers.
Add a new rule to detect the special signature (on model 0x55, stepping
>=4 in any of the memory controller banks).
[ bp: Rewrite it.
aegl: Productize it. ]
Suggested-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200930021313.31810-2-tony.luck@intel.com
|
|
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46f958b
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
|
|
FPU initialization handles them currently. However, in the case
of clearcpuid=, some other early initialization code may check for
features before the FPU initialization code is called. Handling the
argument earlier allows the command line to influence those early
initializations.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200921215638.37980-1-mh@glandium.org
|
|
They do get called from the #MC handler which is already marked
"noinstr".
Commit
e2def7d49d08 ("x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR")
already got rid of the instrumentation in the MSR accessors, fix the
annotation now too, in order to get rid of:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200915194020.28807-1-bp@alien8.de
|
|
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page is enforced. In such a system,
it is not required for software to flush the page from all CPU caches in the
system prior to changing the value of the C-bit for a page. This hardware-
enforced cache coherency is indicated by EAX[10] in CPUID leaf 0x8000001f.
[ bp: Use one of the free slots in word 3. ]
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200917212038.5090-2-krish.sadhukhan@oracle.com
|
|
Work submission instruction comes in two flavors. ENQCMD can be called
both in ring 3 and ring 0 and always uses the contents of a PASID MSR
when shipping the command to the device. ENQCMDS allows a kernel driver
to submit commands on behalf of a user process. The driver supplies the
PASID value in ENQCMDS. There isn't any usage of ENQCMD in the kernel as
of now.
The CPU feature flag is shown as "enqcmd" in /proc/cpuinfo.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-5-git-send-email-fenghua.yu@intel.com
|
|
The mcelog utility is not commonly used on AMD systems. Therefore,
errors logged only by the dev_mce_log() notifier will be missed. This
may occur if the EDAC modules are not loaded, in which case it's
preferable to print the error record by the default notifier.
However, the mce->kflags set by dev_mce_log() notifier makes the
default notifier skip over the errors assuming they are processed by
dev_mce_log().
Do not update kflags in the dev_mce_log() notifier on AMD systems.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200903234531.162484-3-Smita.KoralahalliChannabasappa@amd.com
|
|
Back in commit:
20d51a426fe9 ("x86/mce: Reuse one of the u16 padding fields in 'struct mce'")
a field was added to "struct mce" to save the computed error severity.
Make use of this in mce_reign() to avoid re-computing the severity
for every CPU.
In the case where the machine panics, one call to mce_severity() is
still needed in order to provide the correct message giving the reason
for the panic.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200908175519.14223-2-tony.luck@intel.com
|
|
Add Centaur family >=7 CPUs specific initialization support.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1599562666-31351-3-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
Use a normal if statements instead of a two-condition switch-case.
[ bp: Massage commit message. ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1599562666-31351-2-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
If an exception needs to be handled while reading an MSR - which is in
most of the cases caused by a #GP on a non-existent MSR - then this
is most likely the incarnation of a BIOS or a hardware bug. Such bug
violates the architectural guarantee that MCA banks are present with all
MSRs belonging to them.
The proper fix belongs in the hardware/firmware - not in the kernel.
Handling an #MC exception which is raised while an NMI is being handled
would cause the nasty NMI nesting issue because of the shortcoming of
IRET of reenabling NMIs when executed. And the machine is in an #MC
context already so <Deity> be at its side.
Tracing MSR accesses while in #MC is another no-no due to tracing being
inherently a bad idea in atomic context:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
so remove all that "additional" functionality from mce_rdmsrl() and
provide it with a special exception handler which panics the machine
when that MSR is not accessible.
The exception handler prints a human-readable message explaining what
the panic reason is but, what is more, it panics while in the #GP
handler and latter won't have executed an IRET, thus opening the NMI
nesting issue in the case when the #MC has happened while handling
an NMI. (#MC itself won't be reenabled until MCG_STATUS hasn't been
cleared).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
[ Add missing prototypes for ex_handler_* ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200906212130.GA28456@zn.tnic
|
|
The IDT on 64-bit contains vectors which use paranoid_entry() and/or IST
stacks. To make these vectors work, the TSS and the getcpu GDT entry need
to be set up before the IDT is loaded.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-68-joro@8bytes.org
|
|
Add VMware-specific handling for #VC faults caused by VMMCALL
instructions.
Signed-off-by: Doug Covelli <dcovelli@vmware.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapt to different paravirt interface ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-65-joro@8bytes.org
|
|
Allocate and map an IST stack and an additional fall-back stack for
the #VC handler. The memory for the stacks is allocated only when
SEV-ES is active.
The #VC handler needs to use an IST stack because a #VC exception can be
raised from kernel space with unsafe stack, e.g. in the SYSCALL entry
path.
Since the #VC exception can be nested, the #VC handler switches back to
the interrupted stack when entered from kernel space. If switching back
is not possible, the fall-back stack is used.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-43-joro@8bytes.org
|
|
Add CPU feature detection for Secure Encrypted Virtualization with
Encrypted State. This feature enhances SEV by also encrypting the
guest register state, making it in-accessible to the hypervisor.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-6-joro@8bytes.org
|
|
Fix spelling mistake "Could't" -> "Couldn't" in user-visible warning
messages.
[ bp: Massage commit message; s/cpu/CPU/g ]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200810075508.46490-1-colin.king@canonical.com
|
|
A long time ago, Linux cleared IA32_MCG_STATUS at the very end of machine
check processing.
Then, some fancy recovery and IST manipulation was added in:
d4812e169de4 ("x86, mce: Get rid of TIF_MCE_NOTIFY and associated mce tricks")
and clearing IA32_MCG_STATUS was pulled earlier in the function.
Next change moved the actual recovery out of do_machine_check() and
just used task_work_add() to schedule it later (before returning to the
user):
5567d11c21a1 ("x86/mce: Send #MC singal from task work")
Most recently the fancy IST footwork was removed as no longer needed:
b052df3da821 ("x86/entry: Get rid of ist_begin/end_non_atomic()")
At this point there is no reason remaining to clear IA32_MCG_STATUS early.
It can move back to the very end of the function.
Also move sync_core(). The comments for this function say that it should
only be called when instructions have been changed/re-mapped. Recovery
for an instruction fetch may change the physical address. But that
doesn't happen until the scheduled work runs (which could be on another
CPU).
[ bp: Massage commit message. ]
Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200824221237.5397-1-tony.luck@intel.com
|
|
Early Intel hardware implementations of Memory Bandwidth Allocation (MBA)
could only control bandwidth at the processor core level. This meant that
when two processes with different bandwidth allocations ran simultaneously
on the same core the hardware had to resolve this difference. It did so by
applying the higher throttling value (lower bandwidth) to both processes.
Newer implementations can apply different throttling values to each
thread on a core.
Introduce a new resctrl file, "thread_throttle_mode", on Intel systems
that shows to the user how throttling values are allocated, per-core or
per-thread.
On systems that support per-core throttling, the file will display "max".
On newer systems that support per-thread throttling, the file will display
"per-thread".
AMD confirmed in [1] that AMD bandwidth allocation is already at thread
level but that the AMD implementation does not use a memory delay
throttle mode. So to avoid confusion the thread throttling mode would be
UNDEFINED on AMD systems and the "thread_throttle_mode" file will not be
visible.
Originally-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1598296281-127595-3-git-send-email-fenghua.yu@intel.com
Link: [1] https://lore.kernel.org/lkml/18d277fd-6523-319c-d560-66b63ff606b8@amd.com
|
|
Some systems support per-thread Memory Bandwidth Allocation (MBA) which
applies a throttling delay value to each hardware thread instead of to
a core. Per-thread MBA is enumerated by CPUID.
No feature flag is shown in /proc/cpuinfo. User applications need to
check a resctrl throttling mode info file to know if the feature is
supported.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1598296281-127595-2-git-send-email-fenghua.yu@intel.com
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
The Extended Error Code Bitmap (xec_bitmap) for a Scalable MCA bank type
was intended to be used by the kernel to filter out invalid error codes
on a system. However, this is unnecessary after a few product releases
because the hardware will only report valid error codes. Thus, there's
no need for it with future systems.
Remove the xec_bitmap field and all references to it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200720145353.43924-1-Yazen.Ghannam@amd.com
|
|
resctrl/core.c defines get_cache_id() for use in its cpu-hotplug
callbacks. This gets the id attribute of the cache at the corresponding
level of a CPU.
Later rework means this private function needs to be shared. Move
it to the header file.
The name conflicts with a different definition in intel_cacheinfo.c,
name it get_cpu_cacheinfo_id() to show its relation with
get_cpu_cacheinfo().
Now this is visible on other architectures, check the id attribute
has actually been set.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-11-james.morse@arm.com
|
|
Intel CPUs expect the cache bitmap provided by user-space to have on a
single span of 1s, whereas AMD can support bitmaps like 0xf00f. Arm's
MPAM support also allows sparse bitmaps.
Similarly, Intel CPUs check at least one bit set, whereas AMD CPUs are
quite happy with an empty bitmap. Arm's MPAM allows an empty bitmap.
To move resctrl out to /fs/, platform differences like this need to be
explained.
Add two resource properties arch_has_{empty,sparse}_bitmaps. Test these
around the relevant parts of cbm_validate().
Merging the validate calls causes AMD to gain the min_cbm_bits test
needed for Haswell, but as it always sets this value to 1, it will never
match.
[ bp: Massage commit message. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-10-james.morse@arm.com
|
|
Now after arch_needs_linear has been added, the parse_bw() calls are
almost the same between AMD and Intel.
The difference is '!is_mba_sc()', which is not checked on AMD. This
will always be true on AMD CPUs as mba_sc cannot be enabled as
is_mba_linear() is false.
Removing this duplication means user-space visible behaviour and
error messages are not validated or generated in different places.
Reviewed-by : Babu Moger <babu.moger@amd.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-9-james.morse@arm.com
|
|
MBA difference
The configuration values user-space provides to the resctrl filesystem
are ABI. To make this work on another architecture, all the ABI bits
should be moved out of /arch/x86 and under /fs.
To do this, the differences between AMD and Intel CPUs needs to be
explained to resctrl via resource properties, instead of function
pointers that let the arch code accept subtly different values on
different platforms/architectures.
For MBA, Intel CPUs reject configuration attempts for non-linear
resources, whereas AMD ignore this field as its MBA resource is never
linear. To merge the parse/validate functions, this difference needs to
be explained.
Add struct rdt_membw::arch_needs_linear to indicate the arch code needs
the linear property to be true to configure this resource. AMD can set
this and delay_linear to false. Intel can set arch_needs_linear to
true to keep the existing "No support for non-linear MB domains" error
message for affected platforms.
[ bp: convert "we" etc to passive voice. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-8-james.morse@arm.com
|
|
rdtgroup_tasks_assigned() and show_rdt_tasks() loop over threads testing
for a CTRL/MON group match by closid/rmid with the provided rdtgrp.
Further down the file are helpers to do this, move these further up and
make use of them here.
These helpers additionally check for alloc/mon capable. This is harmless
as rdtgroup_mkdir() tests these capable flags before allowing the config
directories to be created.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-7-james.morse@arm.com
|
|
mbm_handle_overflow() and cqm_handle_limbo() are both provided with
the domain's work_struct when called, but use get_domain_from_cpu()
to find the domain, along with the appropriate error handling.
container_of() saves some list walking and bitmap testing, use that
instead.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-5-james.morse@arm.com
|
|
The comment in rdtgroup_init() refers to the non existent function
rdt_mount(), which has now been renamed rdt_get_tree(). Fix the
comment.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-4-james.morse@arm.com
|
|
max_delay is used by x86's __get_mem_config_intel() as a local variable.
Remove it, replacing it with a local variable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-3-james.morse@arm.com
|
|
Nothing reads struct mbm_states's chunks_bw value, its a copy of
chunks. Remove it.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-2-james.morse@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by
Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of
PREEMPT_RT"
* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Acquire pte lock with interrupts enabled
x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
x86/purgatory: Don't generate debug info for purgatory.ro
x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
kexec_file: Correctly output debugging information for the PT_LOAD ELF header
kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
x86/crash: Correct the address boundary of function parameters
x86/acrn: Remove redundant chars from ACRN signature
x86/acrn: Allow ACRN guest to use X2APIC mode
|
|
The last 32-bit user of stuff under CONFIG_PARAVIRT_XXL is gone.
Remove 32-bit specific parts.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-2-jgross@suse.com
|
